SA40ARLG [ONSEMI]
500W, UNIDIRECTIONAL, SILICON, TVS DIODE, LEAD FREE, PLASTIC, CASE 59AA-01, SIMILAR TO DO-204AC, MINIMOSORB, 2 PIN;型号: | SA40ARLG |
厂家: | ONSEMI |
描述: | 500W, UNIDIRECTIONAL, SILICON, TVS DIODE, LEAD FREE, PLASTIC, CASE 59AA-01, SIMILAR TO DO-204AC, MINIMOSORB, 2 PIN 二极管 电视 |
文件: | 总6页 (文件大小:57K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SA5.0A Series
500 Watt Peak Power
MiniMOSORBt Zener
Transient Voltage
Suppressors
http://onsemi.com
Unidirectional
The SA5.0A series is designed to protect voltage sensitive
components from high voltage, high energy transients. They have
excellent clamping capability, high surge capability, low zener
impedance and fast response time. The SA5.0A series is supplied in
ON Semiconductor’s exclusive, cost-effective, highly reliable
Surmetict axial leaded package and is ideally-suited for use in
communication systems, numerical controls, process controls,
medical equipment, business machines, power supplies and many
other industrial/consumer applications.
Cathode
Anode
AXIAL LEAD
CASE 59AA
PLASTIC
Features
• Working Peak Reverse Voltage Range − 5.0 to 170 V
• Peak Power − 500 Watts @ 1.0 ms
MARKING
DIAGRAM
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• Maximum Clamp Voltage @ Peak Pulse Current
• Low Leakage < 1 mA above 8.5 V
A
SAxxxA
YYWWG
G
• UL 497B for Isolated Loop Circuit Protection
• Maximum Temperature Coefficient Specified
• Response Time is typically < 1.0 ns
A
= Assembly Location
SAxxxA = Device Number
• Pb−Free Packages are Available*
xxx
YY
WW
G
= (See Table Page 3)
= Year
= Work Week
Mechanical Characteristics:
= Pb−Free Package
CASE: Void-free, Transfer-molded, Thermosetting Plastic
FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
MAXIMUM LEAD TEMPERATURE FOR SOLDERING: 230°C,
1/16 in. from the case for 10 seconds
(Note: Microdot may be in either location)
ORDERING INFORMATION
†
Device
SAxxxA
Package
Shipping
POLARITY: Cathode indicated by polarity band
MOUNTING POSITION: Any
Axial Lead
1000 Units / Box
1000 Units / Box
SAxxxAG
Axial Lead
(Pb−Free)
SAxxxARL*
Axial Lead 5000 / Tape & Reel
SAxxxARLG*
Axial Lead 5000 / Tape & Reel
(Pb−Free)
SAxxxALF**
Axial Lead
2000 Units / Box
2000 Units / Box
SAxxxALFG**
Axial Lead
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
*SA8.0A, SA130A, and SA160A Not Available in 5000
Reel.
** Lead formed device.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
May, 2006 − Rev. 11
SA5.0A/D
SA5.0A Series
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Power Dissipation (Note 1)
P
500
W
PK
@ T ≤ 25°C
L
Steady State Power Dissipation
P
3.0
30
W
D
@ T ≤ 75°C, Lead Length = 3/8 in
L
mW/°C
Derated above T = 75°C
L
Thermal Resistance, Junction−to−Lead
R
33.3
70
°C/W
q
JL
Forward Surge Current (Note 2)
I
A
FSM
@ T = 25°C
A
Operating and Storage Temperature Range
T , T
− 55 to +175
°C
J
stg
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Nonrepetitive current pulse per Figure 4 and derated above T = 25°C per Figure 2.
A
2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute.
ELECTRICAL CHARACTERISTICS (T = 25°C unless
A
I
otherwise noted, V = 3.5 V Max. @ I (Note 6) = 35 A)
F
F
I
F
Symbol
Parameter
I
Maximum Reverse Peak Pulse Current
Clamping Voltage @ I
PP
V
C
PP
V
V
V
BR RWM
V
Working Peak Reverse Voltage
C
RWM
V
I
I
V
R
T
F
I
Maximum Reverse Leakage Current @ V
R
RWM
V
Breakdown Voltage @ I
Test Current
BR
T
I
T
QV
Maximum Temperature Variation of V
Forward Current
BR
BR
I
PP
I
F
Uni−Directional TVS
V
Forward Voltage @ I
F
F
http://onsemi.com
2
SA5.0A Series
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted, V = 3.5 V Max. @ I (Note 6) = 35 A)
A
F
F
Breakdown Voltage
V
@ I (Note 5)
C
PP
V
RWM
V
(Note 4) (Volts)
@ I
V
I
(Note 3)
I
@ V
QV
BR
BR
T
C
PP
R
RWM
Device
Volts
mA
Min
Nom
6.7
Max
7
mA
10
10
10
1
Volts
9.2
A
mV/°C
Marking
Device*
SA5.0A, G
SA6.0A, G
SA7.0A, G
SA7.5A, G
SA5.0A
SA6.0A
SA7.0A
SA7.5A
5
6
600
600
150
50
6.4
54.3
48.5
41.7
38.8
5
5
6
7
6.67
7.78
8.33
7.02
8.19
8.77
7.37
8.6
10.3
12
7
7.5
9.21
12.9
SA8.0A, G†
SA8.5A, G
SA9.0A, G
SA10A, G
SA8.0A
SA8.5A
SA9.0A
SA10A
8
8.5
9
25
5
8.89
9.44
10
9.36
9.92
10.55
11.7
9.83
10.4
11.1
12.3
1
1
1
1
13.6
14.4
15.4
17
36.7
34.7
32.5
29.4
7
8
1
9
10
1
11.1
10
SA11A, G
SA12A, G
SA13A, G
SA14A, G
SA11A
SA12A
SA13A
SA14A
11
12
13
14
1
1
1
1
12.2
13.3
14.4
15.6
12.85
14
13.5
14.7
15.9
17.2
1
1
1
1
18.2
19.9
21.5
23.2
27.4
25.1
23.2
21.5
11
12
13
14
15.15
16.4
SA15A, G
SA16A, G
SA17A, G
SA18A, G
SA15A
SA16A
SA17A
SA18A
15
16
17
18
1
1
1
1
16.7
17.8
18.9
20
17.6
18.75
19.9
18.5
19.7
20.9
22.1
1
1
1
1
24.4
26
20.6
19.2
18.1
17.2
16
17
19
20
27.6
29.2
21.05
SA20A, G
SA22A, G
SA24A, G
SA26A, G
SA20A
SA22A
SA24A
SA26A
20
22
24
26
1
1
1
1
22.2
24.4
26.7
28.9
23.35
25.65
28.1
24.5
26.9
29.5
31.9
1
1
1
1
32.4
35.5
38.9
42.1
15.4
14.1
12.8
11.9
23
25
28
30
30.4
SA28A, G
SA30A, G
SA33A, G
SA36A, G
SA28A
SA30A
SA33A
SA36A
28
30
33
36
1
1
1
1
31.1
33.3
36.7
40
32.75
35.05
38.65
42.1
34.4
36.8
40.6
44.2
1
1
1
1
45.4
48.4
53.3
58.1
11
10.3
9.4
31
36
39
41
8.6
SA40A, G
SA43A, G
SA45A, G
SA48A, G
SA51A, G
SA58A, G
SA60A, G
SA64A, G
SA40A
SA43A
SA45A
SA48A
SA51A
SA58A
SA60A
SA64A
40
43
45
48
51
58
60
64
1
1
1
1
1
1
1
1
44.4
47.8
50
46.55
50.3
49.1
52.8
55.3
58.9
62.7
71.2
73.7
78.6
1
1
1
1
1
1
1
1
64.5
69.4
72.7
77.4
82.4
93.6
96.8
103
7.8
7.2
6.9
6.5
6.1
5.3
5.2
4.9
46
50
52
56
61
70
71
76
52.65
56.1
53.3
56.7
64.4
66.7
71.1
59.7
67.8
70.2
74.85
SA64ALF, G
SA70A, G
SA78A, G
SA90A, G
SA100A, G
SA64A
SA70A
SA78A
SA90A
SA100A
64
70
1
1
1
1
1
71.1
77.8
86.7
100
111
74.85
81.9
78.6
86
1
1
1
1
1
103
113
126
146
162
4.9
4.4
4.0
3.4
3.1
76
85
78
91.25
105.5
117
95.8
111
123
95
90
110
123
100
SA110A, G
SA120A, G
SA130A, G†
SA150A, G
SA110A
SA120A
SA130A
SA150A
110
120
130
150
1
1
1
1
122
133
144
167
128.5
140
135
147
159
185
1
1
1
1
177
193
209
243
2.8
2.5
2.4
2.1
133
146
158
184
151.5
176
SA160A, G†
SA170A, G
SA160A
SA170A
160
170
1
1
178
189
187.5
199
197
209
1
1
259
275
1.9
1.8
196
208
NOTE: Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future
use and best overall value.
3. MiniMOSORBt transients suppressor is normally selected according to the maximum working peak reverse voltage (V
), which
RWM
should be equal to or greater than the dc or continuous peak operating voltage level.
4. V measured at pulse test current I at an ambient temperature of 25°C.
BR
T
5. Surge current waveform per Figure 4 and derate per Figures 1 and 2.
6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute
*The “G’’ suffix indicates Pb−Free package available.
†Not Available in the 5000/Tape & Reel.
http://onsemi.com
3
SA5.0A Series
100
10
NONREPETITIVE PULSE
WAVEFORM SHOWN IN
FIGURE 4
°
100
80
60
40
1
20
0
0.1
0.1 ms
1 ms
10 ms
100 ms
1 ms
10 ms
0
25 50 75 100 125 150 175 200
T , AMBIENT TEMPERATURE (°C)
A
t , PULSE WIDTH
p
Figure 1. Pulse Rating Curve
Figure 2. Pulse Derating Curve
PULSE WIDTH (t ) IS
p
DEFINED AS THAT POINT
WHERE THE PEAK
CURRENT DECAYS TO
t ≤ 10 ms
r
10,000
100
PEAK VALUE − I
50% OF I
.
PP
PP
MEASURED @
ZERO BIAS
1000
100
10
I
PP
2
HALF VALUE −
50
0
MEASURED @
t
(V
)
P
RWM
0.1
1
10
100
1000
0
1
2
3
4
V
, BREAKDOWN VOLTAGE (VOLTS)
BR
t, TIME (ms)
Figure 3. Capacitance versus Breakdown Voltage
Figure 4. Pulse Waveform
5
4
3/8″
3/8″
3
2
1
0
0
25 50 75 100 125 150 175 200
T , LEAD TEMPERATURE (°C)
L
Figure 5. Steady State Power Derating
http://onsemi.com
4
SA5.0A Series
UL RECOGNITION*
The entire series including the bidirectional CA suffix has
Breakdown test, Endurance Conditioning, Temperature test,
Dielectric Voltage-Withstand test, Discharge test and
several more.
Whereas, some competitors have only passed a
flammability test for the package material, we have been
recognized for much more to be included in their protector
Underwriters Laboratory Recognition for the classification
of protectors (QVGV2) under the UL standard for safety
497B and File #E 116110. Many competitors only have one
or two devices recognized or have recognition in a
non-protective category. Some competitors have no
recognition at all. With the UL497B recognition, our parts
successfully passed several tests including Strike Voltage
category.
*Applies to SA5.0A, CA − SA170A, CA.
http://onsemi.com
5
SA5.0A Series
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 59AA−01
ISSUE O
(Similar to DO−204AC or DO−15)
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
B
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY.
4. POLARITY DENOTED BY CATHODE BAND.
5. LEAD DIAMETER NOT CONTROLLED WITHIN
F DIMENSION.
D
6. REPLACES CASE 59−09.
K
INCHES
DIM MIN MAX
MILLIMETERS
MIN
5.80
2.60
0.71
MAX
7.60
3.60
0.86
−−−
A
A
B
D
K
0.228 0.299
0.102 0.142
0.028 0.034
1.000
−−− 25.44
K
MiniMOSORB and Surmetic are trademarks of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
SA5.0A/D
相关型号:
SA40C
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)
PANJIT
SA40C
Trans Voltage Suppressor Diode, 500W, 40V V(RWM), Bidirectional, 1 Element, Silicon, DO-41
NJSEMI
SA40C-13
Trans Voltage Suppressor Diode, 500W, 40V V(RWM), Bidirectional, 1 Element, Silicon, DO-15
DIODES
SA40C-51
Trans Voltage Suppressor Diode, 500W, 40V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
SA40C-51-E3
Trans Voltage Suppressor Diode, 500W, 40V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
SA40C-54
Trans Voltage Suppressor Diode, 500W, 40V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明