SPS1M002A-07 [ONSEMI]
Battery Free Wireless Sensor;型号: | SPS1M002A-07 |
厂家: | ONSEMI |
描述: | Battery Free Wireless Sensor 电池 无线 |
文件: | 总6页 (文件大小:94K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SPS1M001
Product Preview
Battery Free Wireless
Sensor
Quality Control Water Intrusion Sensor
www.onsemi.com
ON Semiconductor’s family of Battery Free Wireless Sensors are
®
UHF RFID wireless sensors which use the MagnusS2 Sensor IC and
can perform moisture and proximity sensing functions in a variety of
applications. These are designed for use in enclosed areas where size
and accessibility is at a premium.
The quality control water intrusion sensor is specifically designed
for the passive sensing of moisture in finished goods as a form of leak
detection. The sensors can be placed in specific areas of the object and
greatly simplifies the quality control test for leaks. This Battery Free
Wireless Sensor can reduce the number of missed defects and
significantly improve the quality of manufacturing lines.
RF TAG 166X20 MM
CASE 888AH/AJ
ORDERING INFORMATION
See detailed ordering and shipping information on page 3 of
this data sheet.
Features
• Single IC, Battery Free Wireless Moisture Sensing
• Small form factor package: 76 x 20 x 2.0 mm
• 64 bit TID and 128bit EPC + 144 bit User Defined Memory
• EPC Class 1 Gen 2 v.2.0.0 ISO 18 000−6C Compliant
• Designed for use on Metal
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
A
Rating
Symbol
Max
Unit
Human Body Model (Note 1)
ESD
1
kV
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Junction and Storage Temperature
range
T , T
−20 to +60
°C
J
stg
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Non−repetitive current pulse at T = 25°C, per JS−001 waveform
A
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
February, 2018 − Rev. P3
SPS1M001/D
SPS1M001
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)
A
Characteristic
Symbol
Min
860
−16
Typ
Max
Unit
MHz
dBm
Frequency
f
960
Read Sensitivity
Identification
R
sens
TID
EPC
ROM
64
128
144
Bit
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
Moisture Sensing
The SPS1M001 is a wireless battery free sensor. The
SPSM001 incorporates an integrated RF antenna allowing
it to harvest energy and report back wet environments from
a standard UHF compliant reader. The sensor includes a
strong and easy to apply adhesive backing.
The SPS1M001 generates sensor codes from 0 to 31. With
as little as one drop of water (0.05 ml) placed on the sensor
yields a sensor value 5 codes lower than the dry test. Due to
the Smart Passive Sensors’ self−tuning capability, the sensor
also shifts over frequency as it tunes itself to maximize
reflected power to the reader. This makes it important to
account for the frequency at which the sensor was read. For
both the wet and dry tests seen in Figure 1, the resulting
sensor values shifted around 5 codes over the FCC
frequency range of 902−928 MHz. This factor must be
accounted for in the reader software in order to ensure
reliable wet vs. dry reads. For more information on how
Smart Passive Sensors generate sensor codes, please refer to
Application Note AND9209/D.
35
30
25
20
15
10
Dry
Wet
5
0
800 825
850
875
900
925
950
975
1000
FREQUENCY (MHz)
Figure 1. Sensor Code for Wet and Dry Conditions
www.onsemi.com
2
SPS1M001
ORDERING INFORMATION
Device
†
UHF Band
Package Case Code
888AJ
EPC Code
undefined
undefined
−01
Shipping
SPS1M002A
FCC 902−928 MHz
ETSI 866−868 MHz
FCC 902−928 MHz
FCC 902−928 MHz
FCC 902−928 MHz
FCC 902−928 MHz
FCC 902−928 MHz
FCC 902−928 MHz
FCC 902−928 MHz
FCC 902−928 MHz
FCC 902−928 MHz
FCC 902−928 MHz
500 / Bag
500 / Bag
SPS1M002B
888AH
888AJ
SPS1M002A−01
SPS1M002A−02
SPS1M002A−03
SPS1M002A−04
SPS1M002A−05
SPS1M002A−06
SPS1M002A−07
SPS1M002A−08
SPS1M002A−09
SPS1M002A−10
1000 / Reel
1000 / Reel
1000 / Reel
1000 / Reel
1000 / Reel
1000 / Reel
1000 / Reel
1000 / Reel
1000 / Reel
1000 / Reel
888AJ
−02
888AJ
−03
888AJ
−04
888AJ
−05
888AJ
−06
888AJ
−07
888AJ
−08
888AJ
−09
888AJ
−10
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Magnus−S2 is a registered trademark of RFMicron, Inc.
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
RF TAG 165.7x20mm
CASE 888AJ
ISSUE A
DATE 24 MAY 2017
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. ANTENNA SIZE DETERMINED BY DIMENSIONS
D AND E.
4. LABEL SIZE DETERMINED BY DIMENSIONS D1
AND E1.
5. LABEL IS 0.076 THICK PET TAPE. ANTENNA IS
0.009 THICK ALUMINUM.
D1
D
MILLIMETERS
DIM
D
MIN
163.60 163.70 163.80
17.90 18.00 18.10
165.60 165.70 165.80
19.90 20.00 20.10
NOM
MAX
E1
E
E
D1
E1
TOP VIEW
98AON14001G
ON SEMICONDUCTOR STANDARD
DOCUMENT NUMBER:
STATUS:
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
NEW STANDARD:
DESCRIPTION: RF TAG 165.7X20MM
PAGE 1 OF2
DOCUMENT NUMBER:
98AON14001G
PAGE 2 OF 2
ISSUE
REVISION
DATE
O
A
RELEASED FOR PRODUCTION. REQ. BY F. ESTRADA.
CHANGED DESCRIPTION TO RF TAG 165.7X20MM. REQ. BY F. ESTRADA.
11 JUL 2016
24 MAY 2017
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© Semiconductor Components Industries, LLC, 2017
Case Outline Number:
May, 2017 − Rev. A
888AJ
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
ON Semiconductor Website: www.onsemi.com
◊
www.onsemi.com
相关型号:
©2020 ICPDF网 联系我们和版权申明