SS14FP [ONSEMI]
1 A、40 V 表面贴装肖特基势垒整流器;型号: | SS14FP |
厂家: | ONSEMI |
描述: | 1 A、40 V 表面贴装肖特基势垒整流器 |
文件: | 总6页 (文件大小:247K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount Schottky
Barrier Rectifiers
1 A, 20 V - 150 V
SS12FP - S115FP
Features
www.onsemi.com
• Larger Cathode Pad for Improved Power Dissipation
• Ultra Thin Profile − Package Height < 1.0 mm
• High Surge Current Capability
2
2
• Low Power Loss, High Efficiency
• UL Flammability 94V−0 Classification
• MSL 1 per J−STD−020
1
1
Band Indicates Cathode
• AEC−Q101 Qualified
SOD−123EP
CASE 425AC
• These Devices are Pb−Free and are RoHS Compliant
ABSOLUTE MAXIMUM RATINGS (T = 25°C unless otherwise noted)
A
Value
SS12
FP
SS13
FP
SS14
FP
SS16
FP
S110
FP
S115
FP
Symbol
Parameter
Unit
1
2
V
RRM
Repetitive
20
30
40
60
100
150
V
Peak
Cathode
Anode
Reverse Voltage
V
RMS
14
20
21
30
28
40
42
60
70
105
150
V
V
A
A
RMS
Reverse Voltage
MARKING DIAGRAM
V
DC
100
R
Blocking Voltage
I
Average Forward
Rectified Current
1
F(AV)
&Y
&ZXFP&G
1
2
I
Peak Forward
Surge Current:
8.3 ms Single
Half Sine−Wave
Superimposed on
Rated Load
30
FSM
&Y
&Z
XFP
= Binary Calendar Year Coding
= Assembly Plant Code
= Specific Device Code
X = 0, 2, 3, 4, 6, A
T
Operating
Junction
Temperature
Range
−55 to +125
−55 to +150
°C
°C
J
&G
= Single Digit Week Code
T
Storage
Temperature
Range
−55 to +150
STG
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
May, 2021 − Rev. 2
S110FP/D
SS12FP − S115FP
THERMAL CHARACTERISTICS (T = 25°C unless otherwise noted) (Note 1)
A
Symbol
Parameter
Value
Unit
°C/W
°C/W
Y
JL
Thermal Characteristics, Junction−to−Lead (Note 2)
10
Thermal Resistance, Junction−to−Ambient
140
R
q
JA
1. Per JESD51−3 recommended thermal test board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm.
2. Thermocouple soldered at cathode lead.
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)
A
Value
SS12
FP
SS13
FP
SS14
FP
SS16
FP
S110
FP
S115
FP
Symbol
Parameter
Conditions
IF = 0.5 A
Unit
VF
Maximum Instantaneous
Forward Voltage (Note 3)
0.51
0.55
0.58
0.70
0.70
0.80
0.75
0.90
V
IF = 1.0 A
TJ = 25°C
TJ = 125°C
0.45
0.50
IR
Maximum Reverse Current
at Rated VR
0.40
0.05
0.50
28
mA
CJ
Trr
Typical Junction Capacitance
VR = 4 V,
f = 1 MHz
54
6
pF
ns
Typical Reverse Recovery Time IF = 0.5 A,
IR = 1 A,
14
IRR = 0.25 A
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
3. Pulse test with PW = 300 ms, 1% duty cycle.
ORDERING INFORMATION
†
Part Number
SS12FP
SS13FP
SS14FP
SS16FP
S110FP
Device Code Marking
Package
Packing Method
Tape and Reel
Tape and Reel
Tape and Reel
Tape and Reel
Tape and Reel
Tape and Reel
2FP
3FP
4FP
6FP
0FP
AFP
SOD−123EP
SOD−123EP
SOD−123EP
SOD−123EP
SOD−123EP
SOD−123EP
S115FP
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
2
SS12FP − S115FP
TYPICAL PERFORMANCE CHARACTERISTICS
1.4
1.2
1
100
0.8
0.6
0.4
0.2
0
10
Resistive or
Inductive Load
8.3 ms Single
Half Sine Wawe
1
0
25
50
75
100
125
150
1
10
100
Case Temperature (5C)
Number of Cycles at 60 Hz
Figure 1. Forward Current Derating Curve
Figure 2. Maximum Non−Repetitive
Forward Surge Current
1
1
SS16FP
S110FP
T
A
= 150°C
T
A
= 150°C
T
A
= 125°C
T
A
= −55°C
T = 125°C
A
T
A
= −55°C
0.1
0.1
T
A
= −40°C
T
A
= −40°C
T
A
= 25°C
T
A
= 25°C
0.01
0.01
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.0
0.1
0.8
0.2
0.3
0.4
0.5
0.6
0.7
0.8
Forward Voltage, V (V)
Forward Voltage, V (V)
F
F
Figure 4. Typical Forward Characteristics
Figure 3. Typical Forward Characteristics
10000
1000
100
1
SS12FP − SS16FP
SS15FP
T
A
= 150°C
T
A
= 150°C
T
A
= 125°C
T
A
= −55°C
10
T
= 75°C
A
1
0.1
T
A
= 25°C
0.1
T
A
= 125°C
0.01
0.001
1E−4
1E−5
T
= −55°C
A
T
= 25°C
A
T
= −40°C
T
A
= −40°C
A
0.01
0.0 0.1
0.2
0.3
0.4
0.5 0.6
0.7
0.8
0.9
1.0
10
20
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage (%)
Forward Voltage, V (V)
F
Figure 6. Typical Reverse Characteristics
Figure 5. Typical Forward Characteristic
www.onsemi.com
3
SS12FP − S115FP
TYPICAL PERFORMANCE CHARACTERISTICS
10000
1000
100
1000
S110FP − S115FP
T
A
= 150°C
10
100
10
1
SS12FP − SS116FP
T
= 125°C
A
T
= 75°C
A
1
T
= −55°C
A
0.1
T
A
= 25°C
S110FP − S115FP
0.01
0.001
1E−4
1E−5
T
= −40°C
A
0.1
1
10
100
10
20
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage (%)
Reverse Voltage, V (V)
R
Figure 7. Typical Reverse Characteristic
Figure 8. Typical Junction Capacitance
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOD−123EP
CASE 425AC
ISSUE O
DATE 31 AUG 2016
3.00
2.60
0.55
1.95
1.65
1.15
0.85
1.40
2.30
1.25
LAND PATTERN RECOMMENDATION
LONG PAD IS CATHODE
0.30
0.10
1.00
0.75
3.90
3.50
2.05
1.65
2.05
1.65
NOTES:
A. NO INDUSTRY STANDARD APPLIES TO THIS
PACKAGE.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
1.25
0.85
0.40
0.25
2.30
1.90
1.20
0.55
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13723G
SOD−123EP
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2018
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号:
SS14G
Rectifier Diode, Schottky, 1 Element, 1A, 40V V(RRM), Silicon, DO-214AC, PLASTIC PACKAGE-2
MCC
SS14G-TP
Rectifier Diode, Schottky, 1 Element, 1A, 40V V(RRM), Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
MCC
SS14HE3_B/H
Rectifier Diode, Schottky, 1 Element, 1A, 40V V(RRM), Silicon, DO-214AC, SMA, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明