SS34 [ONSEMI]
3.0 A 肖特基势垒整流器;型号: | SS34 |
厂家: | ONSEMI |
描述: | 3.0 A 肖特基势垒整流器 光电二极管 |
文件: | 总5页 (文件大小:145K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
www.onsemi.com
Schottky Rectifier
SS32 - S310
1
2
Cathode
Anode
Description
The SS32−S310 series includes a high−efficiency, low power loss,
general−propose Schottky rectifiers. The clipbonded leg structure
provides high thermal performance and low electrical resistance.
These rectifiers are suited for free wheeling, secondary rectification,
and reverse polarity protection applications.
SMC
CASE 403AG
Features
• Metal to Silicon Rectifiers, Majority Carrier Conduction
• Low−Forward Voltage Drop
• Easy Pick and Place
• High−Surge Current Capability
• This Device is Pb−Free and Halide Free
MARKING DIAGRAM
$Y&Z&3
Sxyz
G
$Y
= Logo
&Z
= Assembly Plant Code
&3
Sxyz
= Date Code
= Specific Device Code
x = S or 3
y = 1 or 3
z = 0 or 2−9
ORDERING INFORMATION
†
Device
Package
Shipping
3000 /
Tape & Reel
SS32
SS33
SS34
SS35
SS36
SS38
SS39
S310
SMC
(Pb−Free,
Halide−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 1999
1
Publication Order Number:
August, 2021 − Rev. 5
SS39/D
SS32 − S310
ABSOLUTE MAXIMUM RATINGS Values are at T = 25°C unless otherwise noted.
A
Value
SS32 SS33 SS34 SS35 SS36 SS38 SS39 S310
20 30 40 50 60 80 90 100
Symbol
Parameter
Units
V
RRM
Maximum Repetitive Reverse Voltage
V
A
I
Maximum Average Forward Current
3.0
F(AV)
at T = 75°C
A
I
Non−Repetitive Peak Forward Surge Current:
8.3 ms Single Half−Sine Wave
100
A
FSM
dV/dt
Maximum Voltage Rate of Change
Storage Temperature Range
10000
V/mS
°C
T
STG
−55 to +150
−55 to +150
T
J
Operating Junction Temperature
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Symbol
Parameter
Value
2.27
55
Unit
W
P
D
Power Dissipation
R
Thermal Resistance, Junction to Ambient (Note 1)
Thermal Resistance, Junction to Lead
°C/W
°C/W
θ
JA
R
17
θ
JL
1. Device mounted on FE−4 PCB 0.55 x 0.55 inch (14 x 14 mm).
ELECTRICAL CHARACTERISTICS Values are at T = 25°C unless otherwise noted.
A
Value
SS32 SS33 SS34 SS35 SS36 SS38 SS39 S310
Symbol
Parameter
Forwarded Voltage
Test Conditions
I = 3.0 A
Units
mV
V
F
500
750
0.5
850
F
I
R
Reverse Current at Rated V
T = 25°C
A
mA
R
T = 100°C
A
20
10
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
TYPICAL CHARACTERISTICS
100
80
3
2
60
40
1
0
Resistive or Inductive
Load P.C.B. Mounted
on 0.55 x 0.55’’
20
0
(14 x 14) mm
Copper Pad Areas
0
25
50
75
100
125
150
175
1
2
5
10
20
50
100
Ambient Temperature (5C)
Number of Cycles at 60 Hz
Figure 1. Forward Current Derating Curve
Figure 2. Non−Repetitive Surge Current
www.onsemi.com
2
SS32 − S310
TYPICAL CHARACTERISTICS
20
10
50
T = 125°C
A
SS32−SS34
SS35−S310
T = 25°C
A
10 SS32−SS34
T = 125°C
A
1
0.1
SS35−S310
1
T = 75°C
A
SS32−SS34
T = 150°C
A
0.1
0.01
0.001
Pulse Width = 300 ms
SS35−S310
T = 25°C
A
2% Duty Cycle
0.01
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
0
20
40
60
80
100
120
140
Percent of Rated Peak Reverse Voltage (%)
V , Forward Voltage (V)
F
Figure 3. Forward Voltage Characteristics
Figure 4. Reverse Current vs. Reverse Voltage
100
10
1000
SS32−SS34
SS35−S310
100
10
1
0.1
0.01
0.1
1
10
100
0.1
1
10
100
V , Reverse Voltage (V)
R
Pulse Duration (s)
Figure 5. Total Capacitance
Figure 6. Thermal Impedance Characteristics
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SMC
CASE 403AG
ISSUE O
DATE 31 AUG 2016
8.15
7.75
B
1.96
6.25
5.55
3.27
2.75
3.39
B
6.81
M
0.13
C
B
A
7.15
6.60
A
LAND PATTERN RECOMMENDATION
TOP VIEW
8 °
0 °
R0.15
4X
2.45
1.90
A
2.65 MAX
C
GAGE
PLANE
0.41
0.15
SEATING
PLANE
0.203
0.30
0.05
B
B
0.050
4.70
4.40
°
°
8
0
0.45
M
1.60
0.75
0.13
C
A
SIDE VIEW
DETAIL A
SCALE 2:1
NOTES:
A.
EXCEPT WHERE NOTED, CONFORMS TO
JEDEC DO−214, VARIATION AB
B
DOES NOT COMPLY TO JEDEC STD. VALUE
C. ALL DIMENSIONS ARE IN MILLIMETERS
D. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR PROTRUSIONS.
E. DIMENSIONS AND TOLERANCING AS PER
ASME Y14.5−2009
F. LAND PATTERN STANDARD: DIOM7957X241M
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13442G
SMC
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号:
UL1042
UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowegoWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV201
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14
IC-SM-VIDEO AMPWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TA
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TC
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV302N16
IC-SM-4:1 MUX SWITCHWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV4089
VIDEO AMPLIFIER WITH DC RESTORATIONWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
©2020 ICPDF网 联系我们和版权申明