SZEMI9406MUTAG [ONSEMI]
EMI Filter Array, L-C with ESD Protection, for LCD and Camera;型号: | SZEMI9406MUTAG |
厂家: | ONSEMI |
描述: | EMI Filter Array, L-C with ESD Protection, for LCD and Camera CD |
文件: | 总6页 (文件大小:255K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EMI9406
L-C LCD and Camera EMI
Array with ESD Protection
Functional Description
The EMI9406 is an inductor−based (L−C) EMI filter array with
ESD protection, which integrates six filters in a uDFN package with
0.40 mm pitch. Each EMI filter channel of the EMI9406 is
implemented with the component value of 1.8 pF
35 nH–4.7 pF−35 nH–6 pF. The cut−off frequency at −3 dB
attenuation is 300 MHz and can be used in applications where the data
rates are as high as 160 Mbps, while providing greater than −35 dB
attenuation over the 800 MHz to 2.7GHz frequency range. The parts
include ESD diodes on every I/O pin and provide a high level of
protection against electrostatic discharge (ESD). The ESD protection
diodes connected to the external filter ports are designed and
characterized to safely dissipate ESD strikes of 14 kV, which is
beyond the maximum requirement of the IEC61000−4−2 international
standard.
www.onsemi.com
MARKING
DIAGRAMS
L6 MG
12
UDFN12
CASE 517BD
G
1
1
L6
M
G
= Specific Device Code
= Month Code
= Pb−Free Package
(Note: Microdot may be in either location)
PINOUTS
This device is particularly well suited for wireless handsets, mobile
LCD modules and PDAs because of its small package format and
easy−to−use pin assignments. In particular, the EMI9406 is ideal for
EMI filtering and protecting data and control lines for the LCD display
and camera interface in mobile handsets.
Internal Pins
(Lower ESD Event)
1
2
3
4
5
6
7
The EMI9404 is housed in space saving, low profile, 0.40 mm pitch
UDFN packages in a RoHS compliant, Pb−Free format.
GND
Features
12
11
10
9
8
• Six Channels of EMI Filtering with Integrated ESD Protection
• Pi−Style EMI Filters in a Capacitor−Inductor−Capacitor (C−L−C)
Network
External Pins
(Higher ESD Event)
(Bottom View)
•
14 kV ESD Protection (IEC 61000−4−2 Level 4, contact discharge)
at External Pin
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
• Greater than −35 dB Attenuation (typical) at 1 GHz
• UDFN Pb−Free Package with 0.40 mm Lead Pitch:
6−ch. = 12−Lead UDFN
• UDFN Pb−Free Package with 0.40 mm Lead Pitch:
12−lead: 2.50 mm x 1.35 mm
• Increased Robustness Against Vertical Impacts During
Manufacturing Process
• These Devices are Pb−Free and are RoHS Compliant
Applications
• LCD and Camera Data Lines in Mobile Handsets
• Wireless Handsets
• I/O Port Protection for Mobile Handsets, Notebook
• Handheld PCs/PDAs
Computers, PDAs, etc.
• EMI Filtering for Data Ports in Cell Phones, PDAs or
Notebook Computer
• LCD and Camera Modules
© Semiconductor Components Industries, LLC, 2011
1
Publication Order Number:
November, 2018 − Rev. 1
EMI9406/D
EMI9406
Figure 1. Electrical Schematic
Table 1. PIN DESCRIPTIONS
Pin #
Name
Description
1
FILTER1
FILTER2
FILTER3
FILTER4
FILTER5
FILTER6
FILTER6
FILTER5
FILTER4
FILTER3
FILTER2
FILTER1
GND
Filter + ESD Channel 1 (Internal)
Filter + ESD Channel 2 (Internal)
Filter + ESD Channel 3 (Internal)
Filter + ESD Channel 4 (Internal)
Filter + ESD Channel 5 (Internal)
Filter + ESD Channel 6 (Internal)
Filter + ESD Channel 6 (External)
Filter + ESD Channel 5 (External)
Filter + ESD Channel 4 (External)
Filter + ESD Channel 3 (External)
Filter + ESD Channel 2 (External)
Filter + ESD Channel 1 (External)
Device Ground
2
3
4
5
6
7
8
9
10
11
12
GND PAD
SPECIFICATIONS
MAXIMUM RATINGS
Parameter
Value
–65 to +150
15
Unit
°C
Storage Temperature Range
Current per Inductor
mA
mW
DC Package Power Rating
500
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
STANDARD OPERATING CONDITIONS
Parameter
Rating
Unit
Operating Temperature Range
–40 to +85
°C
www.onsemi.com
2
EMI9406
ELECTRICAL OPERATING CHARACTERISTICS (Note 1)
Symbol
Parameter
Total Channel Inductance
Conditions
Min
Typ
70
Max
24
Unit
nH
W
L
TOT
R
TOT
Total Channel DC Resistance
Total Channel Capacitance, 0 V bias
Total Channel Capacitance, 2.5 V bias
Stand−off Voltage
45
C
TOT_0V
TOT_2.5V
ST
LEAK
SIG
0 V dc; 1 MHz, 30 mV
17.5
11.5
pF
pF
V
rms
C
2.5 V dc; 1 MHz, 30 mV
rms
V
I = 10 mA
5.5
I
Diode Leakage Current
VIN = +3.3 V
0.1
0.5
mA
V
V
Signal Clamp Voltage Positive Clamp
Negative Clamp
I
I
LOAD = 10 mA
LOAD = −10 mA
5.6
−1.5
6.8
−0.8
9.0
−0.4
VESD
In−system ESD Withstand Voltage
a) Contact discharge per IEC 61000−4−2
standard, Level 4 (External Pins)
b) Contact discharge per IEC 61000−4−2
standard, Level 4 (Internal Pins)
c) Air discharge per IEC61000−4−2
standard, Level 4 (External Pins)
Notes 2 and 3
14
kV
2
16
V
C
Clamping Voltage
TLP (Note 4)
See Figures 4 through 7
I
= 8 A
= 16 A
= −8 A
= −16 A
13.7
20
−4.4
−7.6
V
PP
I
PP
I
PP
I
PP
fC
Cut−off frequency ZSOURCE = 50 W,
ZLOAD = 50 W
345
MHz
1. T = 25°C unless otherwise specified.
A
2. ESD applied to input and output pins with respect to GND, one at a time.
3. Unused pins are left open.
4. ANSI/ESD STM5.5.1 − Electrostatic Discharge Sensitivity Testing using Transmission Line Pulse (TLP) Model.
TLP conditions: Z = 50 W, t = 100 ns, t = 4 ns, averaging window; t = 30 ns to t = 60 ns.
0
p
r
1
2
PERFORMANCE INFORMATION
TYPICAL FILTER PERFORMANCE
(T = 25°C, DC Bias = 0 V, 50 W Environment)
A
TYPICAL DIODE CAPACITANCE VS. INPUT
VOLTAGE
Figure 3. Filter Capacitance vs. Input Voltage
(Normalized to Capacitance at 0 VDC and 25°C)
Figure 2. Typical Filter Insertion Loss
ORDERING INFORMATION
†
Device
Pins
Marking
Package
Shipping
EMI9406MUTAG
12
96
UDFN12
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
3
EMI9406
VOLTAGE (V)
VOLTAGE (V)
Figure 4. Positive TLP I−V Curve
Figure 5. Negative TLP I−V Curve
Transmission Line Pulse (TLP) Measurement
detail on TLP datasheet parameters, while application note
AND9006/D provides a more complete explanation of the
use of TLP for understanding protection product
characteristics.
Transmission Line Pulse (TLP) provides current versus
voltage (I−V) curves in which each data point is obtained
from a 100 ns long rectangular pulse from a charged
transmission line. A simplified schematic of a typical TLP
system is shown in Figure 6. TLP I−V curves of ESD
protection devices accurately demonstrate the product’s
ESD capability because the 10s of amps current levels and
under 100 ns time scale match those of an ESD event. This
is illustrated in Figure 7 where an 8 kV IEC 61000−4−2
current waveform into a short is compared with TLP current
pulses at 8 A and 16 A, also into a short. A TLP I−V curve
shows the voltage at which the device turns on, as well as
how well the device clamps voltage over a range of current
levels. Typical TLP I−V curves for the EMI9404 are shown
in Figures 4 and 5 for positive and negative stress
respectively. Application note AND9007/D gives more
50 W Coax
Cable
L
Attenuator
S
÷
50 W Coax
Cable
I
M
V
M
10 MW
DUT
V
C
Oscilloscope
Figure 6. Simplified Schematic of a Typical TLP
System
Figure 7. Comparison Between 8 kV IEC 61000−4−2 and 8 A and 16 A TLP Waveforms
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
UDFN12, 2.5x1.35, 0.4P
CASE 517BD−01
ISSUE O
12
1
DATE 18 NOV 2009
SCALE 4:1
A
B
D
NOTES:
L
L
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2X
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.25 mm FROM THE TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
0.10
C
L1
DETAIL A
PIN ONE
REFERENCE
E
OPTIONAL
CONSTRUCTIONS
2X
MILLIMETERS
0.10
C
DIM MIN
0.45
A1 0.00
MAX
0.55
0.05
TOP VIEW
MOLD CMPD
EXPOSED Cu
A
A
A3
b
D
0.13 REF
DETAIL B
(A3)
0.15
0.25
0.05
C
C
A3
2.50 BSC
D2 1.90
2.10
E
1.35 BSC
0.50
0.40 BSC
A1
12X
0.05
E2 0.30
e
K
L
L1
DETAIL B
A1
SEATING
NOTE 4
OPTIONAL
C
0.15
0.20
−−−
−−−
0.30
0.05
PLANE
SIDE VIEW
D2
CONSTRUCTION
DETAIL A
GENERIC
12X L
MARKING DIAGRAM*
6
1
E2
XX MG
G
1
12
7
K
12X b
e
XX
M
G
= Specific Device Code
= Month Code
= Pb−Free Package
0.10
C A B
0.05
C
NOTE 3
BOTTOM VIEW
(Note: Microdot may be in either location)
*This information is generic. Please refer
to device data sheet for actual part
marking.
RECOMMENDED
SOLDERING FOOTPRINT*
Pb−Free indicator, “G” or microdot “ G”,
12X
0.40
may or may not be present.
2.20
PACKAGE
OUTLINE
1.55
0.50
12X
0.25
0.40
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON47061E
UDFN12, 2.5X1.35, 0.4P
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号:
©2020 ICPDF网 联系我们和版权申明