TXP1XGGI2C00046G_技术文档

Multi-rate 10-Gigabit DWDM 40km XFP

Transceivers with Digital Diagnostics

TXP1XGGI2xx

Pb

Product Description

The TXP1XGGI2xx DWDM XFP multi-rate ﬁber optic transceivers with digital

diagnostics monitoring functionality provide a quick and reliable interface

for 40km 10Gbps DWDM applications. The diagnostic functions, alarm and

warning features as described in the XFP Multi-Source Agreement (MSA) are

provided via standard I²C serial interface. The transceivers are compliant with

the XFP Multi-Source Agreement and are designed to support SONET/SDH,

10G Ethernet, and 10G Fiber Channel data rates from 9.95Gb/s to 11.09Gb/s.

Each transceiver utilizes an electro-absorption modulator integrated laser with

an operating wavelength in full compliance with 100GHz (0.8nm) spacing

per the ITU-grid. The transceivers satisfy Class I Laser Safety requirements in

accordance with the U.S. FDA/CDRH and international IEC-60825 standards.

The transceivers connect to standard 30-pad XFP connectors for hot plug

capability. This allows the system designer to make conﬁguration changes or

maintenance by simply plugging in diﬀerent types of transceivers without

removing the power supply from the host system.

Features

 Lead Free Design & Fully RoHS Compliant

The transmitter and receiver DATA interfaces are AC coupled Current Mode

Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal output

interfaces are also provided.

 Compliant with XFP MSA

 Compliant with OC-192/STM-64

 Compliant with ITU-T G.709

The transceivers operate from +1.8V, +3.3V and +5.0V power supplies over a

operating case temperature range of -5°C to +70°C (Commercial), -5°C to +85°C

(Extended), or -40°C to +85°C (Industrial).

 Support DWDM 10G Ethernet Applications

 Support 10G Fiber Channel Applications

 Digital Diagnostics Monitoring

 Temperature-stabilized EML Transmitter

 Low Power Consumption

 Wide Case Operating Temperature Range

 Transmission Distance up to 40km

Absolute Maximum Ratings

Parameter

Symbol

Minimum

Maximum

Units

T_ST

Storage Temperature

- 40

+ 85

°C

Commercial

Extended

Industrial

- 5

- 40

0

+ 70

+ 85

+ 2.0

+ 3.6

+ 6.0

85

Operating Case Temperature ¹

T_OP

°C

V

V_CC2

V_CC3

V_CC5

RH

Supply Voltage

- 0.2

0

Operating Relative Humidity ²

%

V

V_IN

V _CC

Input Voltage

1

0

Case temperature is measured on top side of XFP module.

Non condensing

2

S0120. Rev.03. 2011-05-11

An Oplink Company

TXP1XGGI2xx

(Over Operating Case Temperature Range and V_CC= 3.13 to 3.47V)

Transmitter Performance Characteristics

All parameters guaranteed only at typical data rate

Parameter

Operating Data Rate

Symbol

Minimum

Typical

Maximum

Units

B

P_O

9.95

- 1.0

-

11.09

+ 3.0

- 45.0

-

Gb/s

dBm

dB

Average Optical Output Power (50% duty cycle)

Transmitter OFF Power

P_OFF

ER

Extinction Ratio @ 9.95Gb/s to 10.7Gb/s

Center Wavelength ¹

Spectral Width (-20dB) ²

8.2

λ_C

See Ordering Information Table

nm

dB

Δλ20

SMSR

RIN

ref_T

-

30

-

1.0

-

Side Mode Suppression Ratio

Relative Intensity Noise

- 130

- 27

0.1

dB/Hz

dB

Reﬂectance Tolerance

Tx Jitter Generation (peak-to-peak) ³

-

JG_P-P

JG_RMS

-

UI

Jitter Generation (RMS)

-

0.01

2.0

UI

@ 9.95Gb/s

-

4

Dispersion Penalty

DP

dB

@ 11.09Gb/s

-

2.5

Optical Output Eye

Compliant with GR253-CORE, IEEE 803.3ae , and ITU-T G.959

¹BOL: +/-0.05nm from ITU grid. EOL: +/-0.1nm from ITU grid.

²Measured with OSA and 0.1nm resolution bandwidth.

³Jiꢀer generation is compliant with SONET OC-192 per GR-253 and OTU-2 per G.709.

⁴Speciﬁed as the diﬀerence between the maximum receiver sensitivity and the worst case receiver sensitivity with 40km ﬁber.

(Over Operating Case Temperature Range and V_CC= 3.13 to 3.47V)

Receiver Performance Characteristics

Parameter

Operating Data Rate

Symbol

Minimum

Typical

Maximum

Units

9.95

-

11.09

B

Gb/s

nm

Wavelength of Operation

λ

1260

-

1570

- 16.0

- 19.0

-

@ 9.95Gb/s (10^-12BER)

Receiver Sensitivity

-

P^min

dBm

@ 11.09Gb/s (10^-4BER)

-

+ 0.5

-

Maximum Input Optical Power

P^max

P^los+

P^los-

-

Increasing Light Input

LOS Thresholds

- 16.0

-

Decreasing Light Input

- 28.0

0.5

-

LOS Hysteresis

-

dB

Receiver Reﬂectance

-

- 27

Laser Safety: All transceivers are Class I Laser

products per FDA/CDRH and IEC-60825 stan-

dards. They must be operated under speciﬁed

operating conditions.

Oplink Communications, Inc.

DATE OF MANUFACTURE:

This product complies with

21 CFR 1040.10 and 1040.11

Meets Class I Laser Safety Requirements

Oplink Communications, Inc

S0120. Rev.03. 2011-05-11

2

TXP1XGGI2xx

Electrical Interface (Over Operating Case Temperature Range and V_CC

)

Parameter

Diﬀerential Impedance

Symbol

Minimum

Typical

Maximum

Units

Z_d

-

100

-

Ω

V_{p-p, diﬀ}

Diﬀerential Input Voltage Swing

Diﬀerential Output Voltage Swing

Output Rise/Fall Time (20 to 80%)

120

-

820

mV

ps

340

550

850

T /T_f

24

-

0.8

r

V_IL

V_IH

V_OL

V_OH

- 0.3

TX_Dis, P_Down/RST

V

2.0

V_CC+ 0.3

0.4

0

XFP Interrupt, Mod_NR, RX_LOS

host_V_CC- 0.5

host_V_CC+ 0.3

(Over Operating Case Temperature Range and V_CC

)

Electrical Power Supply Characteristics

Parameter

Symbol

Minimum

Typical

Maximum

Units

V_CC2

V_CC3

V_CC5

I_CC2

1.71

1.8

3.3

5.0

310

350

40

2

1.89

3.47

5.25

350

750

100

3.5

Supply Voltage

3.13

V

4.75

-

Supply Current

I_CC3

mA

I_CC5

Power Dissipation

PW

W

-

1.5

P_Down Power Dissipation

PDW

XFP Transceiver Electrical Pad Layout

Host Board Connector Pad Layout

GND

30 GND

29 TD+

28 TD-

1

GND

TD+

30

29

28

27

26

25

24

23

22

21

20

19

18

17

16

1

GND

V

5

2

EE

2

V

5

EE

Mod_DeSel

Interrupt

TX_Dis

3

TD-

3

Mod_DeSel

Interrupt

TX_Dis

27

26

25

24

23

22

21

20

19

18

17

16

GND

4

GND

4

GND

5

GND

5

V

5

RefCLK-

RefCLK+

GND

6

CC

RefCLK-

RefCLK+

6

V

5

cc

GND

7

GND

V

3

8

CC

GND

Toward

Bezel

Toward

ASIC

8

V

3

cc

V

3

V

2

9

CC

V

2

cc

9

cc

SCL

TP_Down/RS

10

11

12

13

14

15

P_Down/RST

10

11

12

13

14

15

SCL

SDA

V

2

CC

V

2

cc

SDA

Mod_Abs

Mod_NR

RX_LOS

GND

RD+

RD-

GND

RD+

RD-

Mod_Abs

Mod_NR

RX_LOS

GND

Bottom of XFP Board

(as viewed thru top of board)

Top of XFP Board

Oplink Communications, Inc

S0120. Rev.03. 2011-05-11

3

TXP1XGGI2xx

Module Pin Description

Logic

Symbol

Description

1

Module Ground

-

GND

V_EE5

2

3

4

-

Optional -5.2V Power Supply (Not Required)

LVTTL-I

Mod_DeSel

Module De-select; When held low allows module to respond to 2-wire serial interface

Interrupt; Indicates presence of an important condition which can be read over the 2-wire serial

Interface

LVTTL-O

Interrupt

5

LVTTL-I

TX_Dis

V_CC5

Transmitter Disable; Turns oﬀ transmitter laser output

+5V Power Supply

6

-

7

-

GND

V_CC3

Module Ground

8

-

+3.3V Power Supply

9

-

LVTTL-I/O

LVTTL-O

-

V_CC3

+3.3V Power Supply

10

11

12

13

14

15

16

17

18

19

20

SCL

2-Wire Serial Interface Clock

2-Wire Serial Interface Data Line

Indicates Module is not present. Grounded in the Module

Module Not Ready; Indicating Module Operational Fault

Receiver Loss Of Signal Indicator

Module Ground

SDA

Mod_Abs

Mod_NR

RX_LOS

GND

RD-

-

Module Ground

CML-O

-

Receiver Inverted Data Output

Receiver Non-Inverted Data Output

Module Ground

RD+

GND

V_CC2

-

+1.8V Power supply

Power down; When high, requires the module to limit power consumption to 1.5W or below. 2-Wire

serial interface must be functional in the low power mode.

21

LVTTL-I

P_Down/RST

Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface,

equivalent to a power cycle.

22

23

24

25

26

27

28

29

30

-

V_CC2

GND

+1.8V Power supply

-

PECL-I

-

Module Ground

RefCLK+

RefCLK-

GND

Reference Clock Non-Inverted Input (Not Required)

Reference Clock Inverted Input (Not Required)

Module Ground

-

GND

Module Ground

CML-I

-

TD-

Transmitter Inverted Data Input

Transmitter Non-Inverted Data Input

Module Ground

TD+

GND

S0120. Rev.03. 2011-05-11

4

Oplink Communications, Inc

TXP1XGGI2xx

Host Board Termination & Coupling

TD+

CML

INPUTS

1µH coil or

ferrite inductor

TD-

20, 22

8, 9

+1.8V

+3.3V

+

0.1

10

0.1

RD+

CML

OUTPUTS

1µH coil or

ferrite inductor

RD-

+

0.1

10

ASIC/

SerDes

XFP

1µH coil or

+3.3V

R

ferrite inductor

+3.3V

R

+5.0V

6

+

0.1

10

0.1

+3.3V

R

SCL, SDA,

Mod_Abs, Mod_NR,

Interrupt, RX_LOS

All caps are in units of µF

Application Notes

Electrical Interface: All signal interfaces are compliant with

the XFP MSA speciﬁcation. The high speed DATA interface

is differential AC-coupled internally and can be directly

connected to a 3.3V SERDES IC.

an open collector and must be pulled to Host_Vcc on the

host board.

P_Down/RST: The negative edge of Reset Function signal

initiates a complete module reset.

RX_LOS: The Loss of Signal circuit monitors the level of the

incoming optical signal and generates a logic HIGH when an

insuﬃcient photocurrent is produced.

Module Behavior During P_Down and RST: During

execution of a reset (t_init) or while held in Power Down

mode, a module may be unable to determine the correct

value for Mod_NR and RX_LOS. These outputs as well as all

interrupt related ﬂags, except completion of Reset ﬂag, shall

be disregarded by the host. When the module completes

a Reset and is not in Power Down mode, the module must

represent the correct value of both signals on its outputs

before posting a completion of reset interrupt to the host.

TX_Dis: When the TX Disable pin is at logic HIGH, the

transmitter optical output is disabled. (less than -45dBm).

P_Down: The Power Down Function pin, when held High by

the host, places the module in the standby (Low Power) mode

with a maximum power dissipation of 1.5W. This protects

hosts which are not capable of cooling higher power modules

which may be accidentally inserted.The module’s 2-wire serial

At no time shall a module cause spurious assertion of the

interface and all laser safety functions must be fully functional Interrupt pin. When a host initially applies power to a module

in this low power mode. During P_Down, the module shall still with the P_Down/RST signal asserted, a module comes up in

support the completion of reset Interrupt, as well as maintain power down mode.The module shall only assert the Interrupt

functionality of the variable power supply.

signal pin to inform the host it has completed a reset. The

completion of reset ﬂag shall be the only interrupt source

ﬂag set during power down mode. The host is expected to

clear this interrupt before releasing the module from the

power down mode. The transition from power down mode

to normal mode will trigger a reset of the module and result

in a 2nd module reset and a 2nd reset completion interrupt

to the host.

Mod_NR: The Mod_NR is an output pin that when High,

indicates that the module has detected a condition that

renders transmitter and or receiver data invalid, shall consist

of logical OR of the following signals:

• Transmit Signal Conditioner Loss of Lock

• Transmitter Laser Fault

• Receiver Signal Conditioner Loss of Lock

Power Supply and Grounding:The power supply line should

be well-ﬁltered. All 0.1μF power supply bypass capacitors

should be as close to the transceiver module as possible.

Other conditions deemed valuable to the detection of fault

may be added to the Mod_NR. The Mod_NR output pin is

Oplink Communications, Inc

S0120. Rev.03. 2011-05-11

5

TXP1XGGI2xx

Package Outline

DIMENSION IN MILLIMETERS

NOTES: UNLESS OTHERWISE

SPECIFIED

Ordering Information

Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s Sales and Mar-

keting for your requirements and ordering information (510) 933-7200 or Sales@oplink.com.

Center

Wavelength

(nm)

ITU

Frequency

(THz)

Wavelength

Reference

Model Name

Operating Temperature

Distance

Commercial

TXP1XGGI2C00061G

TXP1XGGI2C00060G

TXP1XGGI2C00059G

TXP1XGGI2C00058G

TXP1XGGI2C00057G

TXP1XGGI2C00056G

TXP1XGGI2C00055G

TXP1XGGI2C00054G

TXP1XGGI2C00053G

TXP1XGGI2C00052G

TXP1XGGI2C00051G

TXP1XGGI2C00050G

TXP1XGGI2C00049G

TXP1XGGI2C00048G

TXP1XGGI2C00047G

TXP1XGGI2C00046G

- 5°C to +70°C

1528.77

1529.55

1530.33

1531.12

1531.90

1532.68

1533.47

1534.25

1535.04

1535.82

1536.61

1537.40

1538.19

1538.98

1539.77

1540.56

196.1

196.0

195.9

195.8

195.7

195.6

195.5

195.4

195.3

195.2

195.1

195.0

194.9

194.8

194.7

194.6

61

60

59

58

57

56

55

54

53

52

51

50

49

48

47

46

40km

Commercial

Oplink Communications, Inc

S0120. Rev.03. 2011-05-11

6

TXP1XGGI2xx

Center

Wavelength

(nm)

ITU

Frequency

(THz)

Wavelength

Distance

Model Name

Operating Temperature

Commercial

Reference

TXP1XGGI2C00045G

TXP1XGGI2C00044G

TXP1XGGI2C00043G

TXP1XGGI2C00042G

TXP1XGGI2C00041G

TXP1XGGI2C00040G

TXP1XGGI2C00039G

TXP1XGGI2C00038G

TXP1XGGI2C00037G

TXP1XGGI2C00036G

TXP1XGGI2C00035G

TXP1XGGI2C00034G

TXP1XGGI2C00033G

TXP1XGGI2C00032G

TXP1XGGI2C00031G

TXP1XGGI2C00030G

TXP1XGGI2C00029G

TXP1XGGI2C00028G

TXP1XGGI2C00027G

TXP1XGGI2C00026G

TXP1XGGI2C00025G

TXP1XGGI2C00024G

TXP1XGGI2C00023G

TXP1XGGI2C00022G

TXP1XGGI2C00021G

TXP1XGGI2C00020G

TXP1XGGI2C00019G

TXP1XGGI2C00018G

TXP1XGGI2C00017G

- 5°C to +70°C

1541.35

1542.14

1542.94

1543.73

1544.53

1545.32

1546.12

1546.92

1547.72

1548.51

1549.32

1550.12

1550.92

1551.72

1552.52

1553.33

1554.13

1554.94

1555.75

1556.55

1557.36

1558.17

1558.98

1559.79

1560.61

1561.42

1562.23

1563.05

1563.86

194.5

194.4

194.3

194.2

194.1

194.0

193.9

193.8

193.7

193.6

193.5

193.4

193.3

193.2

193.1

193.0

192.9

192.8

192.7

192.6

192.5

192.4

192.3

192.2

192.1

192.0

191.9

191.8

191.7

45

44

43

42

41

40

39

38

37

36

35

34

33

32

31

30

29

28

27

26

25

24

23

22

21

20

19

18

17

40km

Commercial

Center

Wavelength

(nm)

ITU

Frequency

(THz)

Wavelength

Reference

Model Name

Operating Temperature

Distance

Extended

TXP1XGGI2E00061G

TXP1XGGI2E00060G

TXP1XGGI2E00059G

TXP1XGGI2E00058G

TXP1XGGI2E00057G

TXP1XGGI2E00056G

TXP1XGGI2E00055G

TXP1XGGI2E00054G

TXP1XGGI2E00053G

TXP1XGGI2E00052G

TXP1XGGI2E00051G

- 5°C to +85°C

1528.77

1529.55

1530.33

1531.12

1531.90

1532.68

1533.47

1534.25

1535.04

1535.82

1536.61

196.1

196.0

195.9

195.8

195.7

195.6

195.5

195.4

195.3

195.2

195.1

61

60

59

58

57

56

55

54

53

52

51

40km

Extended

Oplink Communications, Inc

S0120. Rev.03. 2011-05-11

7

TXP1XGGI2xx

Center

Wavelength

(nm)

ITU

Frequency

(THz)

Wavelength

Distance

Model Name

Operating Temperature

Extended

Reference

TXP1XGGI2E00050G

TXP1XGGI2E00049G

TXP1XGGI2E00048G

TXP1XGGI2E00047G

TXP1XGGI2E00046G

TXP1XGGI2E00045G

TXP1XGGI2E00044G

TXP1XGGI2E00043G

TXP1XGGI2E00042G

TXP1XGGI2E00041G

TXP1XGGI2E00040G

TXP1XGGI2E00039G

TXP1XGGI2E00038G

TXP1XGGI2E00037G

TXP1XGGI2E00036G

TXP1XGGI2E00035G

TXP1XGGI2E00034G

TXP1XGGI2E00033G

TXP1XGGI2E00032G

TXP1XGGI2E00031G

TXP1XGGI2E00030G

TXP1XGGI2E00029G

TXP1XGGI2E00028G

TXP1XGGI2E00027G

TXP1XGGI2E00026G

TXP1XGGI2E00025G

TXP1XGGI2E00024G

TXP1XGGI2E00023G

TXP1XGGI2E00022G

TXP1XGGI2E00021G

TXP1XGGI2E00020G

TXP1XGGI2E00019G

TXP1XGGI2E00018G

TXP1XGGI2E00017G

- 5°C to +85°C

1537.40

1538.19

1538.98

1539.77

1540.56

1541.35

1542.14

1542.94

1543.73

1544.53

1545.32

1546.12

1546.92

1547.72

1548.51

1549.32

1550.12

1550.92

1551.72

1552.52

1553.33

1554.13

1554.94

1555.75

1556.55

1557.36

1558.17

1558.98

1559.79

1560.61

1561.42

1562.23

1563.05

1563.86

195.0

194.9

194.8

194.7

194.6

194.5

194.4

194.3

194.2

194.1

194.0

193.9

193.8

193.7

193.6

193.5

193.4

193.3

193.2

193.1

193.0

192.9

192.8

192.7

192.6

192.5

192.4

192.3

192.2

192.1

192.0

191.9

191.8

191.7

50

49

48

47

46

45

44

43

42

41

40

39

38

37

36

35

34

33

32

31

30

29

28

27

26

25

24

23

22

21

20

19

18

17

40km

Extended

Center

Wavelength

(nm)

ITU

Frequency

(THz)

Wavelength

Reference

Model Name

Operating Temperature

Distance

Industrial

TXP1XGGI2I00061G

TXP1XGGI2I00060G

TXP1XGGI2I00059G

TXP1XGGI2I00058G

TXP1XGGI2I00057G

TXP1XGGI2I00056G

-40°C to +85°C

1528.77

1529.55

1530.33

1531.12

1531.90

1532.68

196.1

196.0

195.9

195.8

195.7

195.6

61

60

59

58

57

56

40km

Industrial

Oplink Communications, Inc

S0120. Rev.03. 2011-05-11

8

TXP1XGGI2xx

Center

Wavelength

(nm)

ITU

Frequency

(THz)

Wavelength

Distance

Model Name

Operating Temperature

Industrial

Reference

TXP1XGGI2I00055G

TXP1XGGI2I00054G

TXP1XGGI2I00053G

TXP1XGGI2I00052G

TXP1XGGI2I00051G

TXP1XGGI2I00050G

TXP1XGGI2I00049G

TXP1XGGI2I00048G

TXP1XGGI2I00047G

TXP1XGGI2I00046G

TXP1XGGI2I00045G

TXP1XGGI2I00044G

TXP1XGGI2I00043G

TXP1XGGI2I00042G

TXP1XGGI2I00041G

TXP1XGGI2I00040G

TXP1XGGI2I00039G

TXP1XGGI2I00038G

TXP1XGGI2I00037G

TXP1XGGI2I00036G

TXP1XGGI2I00035G

TXP1XGGI2I00034G

TXP1XGGI2I00033G

TXP1XGGI2I00032G

TXP1XGGI2I00031G

TXP1XGGI2I00030G

TXP1XGGI2I00029G

TXP1XGGI2I00028G

TXP1XGGI2I00027G

TXP1XGGI2I00026G

TXP1XGGI2I00025G

TXP1XGGI2I00024G

TXP1XGGI2I00023G

TXP1XGGI2I00022G

TXP1XGGI2I00021G

TXP1XGGI2I00020G

TXP1XGGI2I00019G

TXP1XGGI2I00018G

TXP1XGGI2I00017G

-40°C to +85°C

1533.47

1534.25

1535.04

1535.82

1536.61

1537.40

1538.19

1538.98

1539.77

1540.56

1541.35

1542.14

1542.94

1543.73

1544.53

1545.32

1546.12

1546.92

1547.72

1548.51

1549.32

1550.12

1550.92

1551.72

1552.52

1553.33

1554.13

1554.94

1555.75

1556.55

1557.36

1558.17

1558.98

1559.79

1560.61

1561.42

1562.23

1563.05

1563.86

195.5

195.4

195.3

195.2

195.1

195.0

194.9

194.8

194.7

194.6

194.5

194.4

194.3

194.2

194.1

194.0

193.9

193.8

193.7

193.6

193.5

193.4

193.3

193.2

193.1

193.0

192.9

192.8

192.7

192.6

192.5

192.4

192.3

192.2

192.1

192.0

191.9

191.8

191.7

55

54

53

52

51

50

49

48

47

46

45

44

43

42

41

40

39

38

37

36

35

34

33

32

31

30

29

28

27

26

25

24

23

22

21

20

19

18

17

40km

Industrial

Oplink Communications, Inc. reserves the right to make changes in equipment design or speciﬁcations without notice. Information supplied by Oplink Commu-

nications, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Oplink Communications, Inc. for its use nor for any infringements

of third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of Oplink Communications, Inc.

S0120. Rev.03. 2011-05-11

9


型号：	TXP1XGGI2C00046G
厂家：	OPLINK COMMUNICATIONS INC.
描述：	Multi-rate 10-Gigabit DWDM 40km XFP Transceivers with Digital Diagnostics
文件：	总9页 (文件大小：517K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TXP1XGGI2C00046G [OPLINK]

相关型号：

TXP1XGGI2C00047G

TXP1XGGI2C00048G

TXP1XGGI2C00049G

TXP1XGGI2C00050G

TXP1XGGI2C00051G

TXP1XGGI2C00052G

TXP1XGGI2C00053G

TXP1XGGI2C00054G

TXP1XGGI2C00055G

TXP1XGGI2C00056G

TXP1XGGI2C00057G

TXP1XGGI2C00058G