OTS-1VT1ETR-L4/L4-LC-IC [OPTICOMM]
Optiva Standard, 1 Composite Video and 1 Duplex 10/100 Mbps Ethernet; OPTIVA标准,1个复合视频和1复式10/100 Mbps以太网型号: | OTS-1VT1ETR-L4/L4-LC-IC |
厂家: | Opticomm Corporation |
描述: | Optiva Standard, 1 Composite Video and 1 Duplex 10/100 Mbps Ethernet |
文件: | 总2页 (文件大小:198K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OTS-1V1ETR
™
Optiva Standard, 1 Composite Video
and 1 Duplex 10/100 Mbps Ethernet
Composite Video and Ethernet
The OTS-1V1ETR provides for the digital
transmission of 1 Channel of Composite
Video and 1 Channel of Duplex 10/100
Ethernet.
Ethernet
Data In
Ethernet
Data Out
Video
Audio
Each insert card comes with a label
identifying the specific protocols
handled, connector pin-out and other
vital information.
System Design
A
L
E
R
T
S
A
L
E
R
T
S
All units come in an insert card version.
The cards can be inserted into our 16-slot,
19” rack-mountable card cage (OT-CC-16-100)
or one of our smaller Optiva™ Desktop
Card Racks (OT-DTCR Series).
T
A
T
U
S
T
A
T
U
S
Composite
Video In
Composite
Video Out
For optimal bandwidth allocation,
each insert card can daisy-chain with
an additional card in the same chassis.
See “Optiva™ Upgrade Path”.
ST, LC,
SC or FC
ST, LC,
SC or FC
The Optiva™ Desktop Card Racks can handle
one, two or four insert cards, creating
compact, mountable, stand alone systems.
The use of separate OT-DTCR enclosures
allows for future flexibility and expansion as
all cards are hot-swappable and can be used
in any enclosure. Each one of our card
housing units operate with an appropriate
power supply. See “Accessories” for power
supply specifications.
™
™
Optiav
Optiav
VAD Transmission
VAD Transmission
Data
OTS-1VT1ETR
Features
OTS-1VR1ERT
Ethernet
• Composite Video and Ethernet over one fiber
• 10-Bit Digital Transmission
• TDM - Single fiber, dual wavelength
• Complies with SMPTE standards for Video transmission
Optiva™ Upgrade Path
• Compatible with MDM-7000 Series for WDM and CWDM
multiplexing
This system can be purchased without
an optical port as an add-on to an existing
Optiva™ system daisy-chain.
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
(See “Non-Optical Version” below).
• Ideal for Professional AV applications
The Optiva™ bandwidth requirement
of this system is 523 Mbps.
Versions Available*
Wavelength (nm)
& Fiber
Optical
Connector
Optical Budget Range***
Transmit/Receive**
Receive/Transmit**
(dB)
(km) Form Factor
1310/1550 Multimode
OTS-1VT1ETR-A1/A3M-XX-IC
OTS-1VR1ERT-A3M/A1-XX-IC
OTS-1VR1ERT-A3/A2-XX-IC
OTS-1VR1ERT-A3D/A2-XX-IC
OTS-1VR1ERT-A3H/A2-XX-IC
OTS-1VR1ERT-L4/L4-XX-IC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
10
12
3
20
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
1310/1550 Singlemode OTS-1VT1ETR-A2/A3-XX-IC
1310/1550 SM (D)
1310/1550 SM (H)
1270-1610 SM (CWDM)
OTS-1VT1ETR-A2/A3D-XX-IC
OTS-1VT1ETR-A2/A3H-XX-IC
OTS-1VT1ETR-L4/L4-XX-IC
17
40
25
60
Varies
20-70
Non-Optical Version
OTS-1VT1ETR-NOC-IC
OTS-1VR1ERT-NOC-IC
N/A
N/A
N/A
IC (1-slot)
* Contact Opticomm for other versions available.
** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
*** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
Composite Video,
Audio & Data
Video
Standard
™
Optiva Configurable
SMPTE 170M; RS-250C
Communication Platform
Bit Resolution
Level
10-Bit Processing; 10-Bit Transmission
Network Management
1.0 Volt p-p
5.5 MHz
Bandwidth
SDI & HD-SDI
Differential Gain
Differential Phase
Compatibility
Signal to Noise Ratio
Connector
< 1%
Composite Video,
< 0.7°
Audio & Data
NTSC, PAL
> 67 dB
RGB/VGA/DVI
BNC (IEC 60169-8)
Audio/FSK/Intercom
Data
Standard
Data (Ethernet/Serial/USB)
Ethernet IEEE 802.3 (Auto-Negotiation)
10/100 Mbps
CATV/RF & L-Band
Data Rate
Connector
Optical Switching, Routing
RJ-45 UTP
& Redundancy
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Passive Multiplexing
Insert Card (IC): 6.3” L x 0.8” W x 4.0” H
-20° C to +55° C
11 oz
Solutions
Enclosures, Racks
-40° C to +85° C
& Frames
0 to 95% non-condensing
9-12 VDC
Operating voltage
Consumption
Power Supplies
1 Amp Max per Insert Card
Less than 1ms
& Accessories
System Latency
Local Monitoring
LED Status Indication
™
Remote Monitoring
Compatible with OptivaView
SNMP Management Suite
MADE IN THE USA
Sample Configuration
相关型号:
OTS-1VT1ETR-L4/L4-SC-IC
Optiva Standard, 1 Composite Video and 1 Duplex 10/100 Mbps Ethernet
OPTICOMM
OTS-1VT1ETR-L4/L4-ST-IC
Optiva Standard, 1 Composite Video and 1 Duplex 10/100 Mbps Ethernet
OPTICOMM
©2020 ICPDF网 联系我们和版权申明