BTRS-5780-1590G_09
更新时间:2024-09-18 10:01:20
品牌:OPTOWAY
描述:1590 nm TX / 1510 nm RX , 3.3V / 622 Mbps RoHS Compliant Single-Fiber Transceiver
BTRS-5780-1590G_09 概述
1590 nm TX / 1510 nm RX , 3.3V / 622 Mbps RoHS Compliant Single-Fiber Transceiver 1590毫微米TX / 1510 nm的RX , 3.3V / 622 Mbps的符合RoHS单光纤收发器
BTRS-5780-1590G_09 数据手册
通过下载BTRS-5780-1590G_09数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载1
Optoway
BTRS-5780-1590G
***********************************************************************************************************************************************************************
BTRS-5780-1590G / BTRS-5780-1590-SPG / BTRS-5780A-1590G / BTRS-5780A-1590-SPG
1590 nm TX / 1510 nm RX , 3.3V / 622 Mbps RoHS Compliant Single-Fiber Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber Bi-Directional SFF Transceiver
l 1590 nm DFB LD Transmitter
l 1510 nm Receiver
The BTRS-5780-1590G series is high performance module
for single fiber communications by using 1590 nm
transmitter and 1510 nm receiver. The transmitter section
uses a multiple quantum well 1590 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated 1510 nm detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
l Distance Up to 80 km
l Speed up to 650 Mbps
l Single +3.3 V Power Supply
l RoHS Compliant
l PECL Differential Inputs and Outputs
l 0 to 70oC Operating: BTRS-5780-1590G
l -20 to 85oC Operating: BTRS-5780A-1590G
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l WDM 622 Mb/s Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet & Fiber Channel Links
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
Distance
(km)
TX
(nm)
RX
(nm)
Voltage Package Temp
(V)
TX
Power
(dBm)
RX Sens. RoHS
(dBm) Compliant
(oC)
BTRS-5780-1590G
BTRS-5780A-1590G
622
622
80
80
1590 DFB
1590 DFB
1510
1510
3.3
3.3
2X5 SC 0 to 70
3 to -2
-28
-28
Yes
Yes
2X5 SC -20 to 85 3 to -2
Note: 1. BTRX-XXXXXG is receptacle type package with standard case
2. BTRX-XXXXXEG is receptacle type package with extended case
3. BTRX-XXXXX-APBBBG is pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V4.0
2
Optoway
BTRS-5780-1590G
**********************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Min
Max
Units
oC
oC
Notes
-40
0
85
70
Topr
BTRS-5780-1590G
-20
85
BTRS-5780A-1590G
10 seconds on leads only
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
Vcc
oC
V
0
GND
0
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Min
3.13
0
-20
50
Typ
Max
3.47
70
85
650
260
Units / Notes
Vcc
3.3
V
oC / BTRS-5780-1590G
oC / BTRS-5780A-1590G
Mb/s
Topr
Data Rate
622
Power Supply Current
Icc
mA
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
1
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Po
l
-2
3
1620
1
dBm
nm
nm
dB
1580
-20 dB Width
σl
SMSR
ER
30
10
dB
Output Eye
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Optical Rise Time
Optical Fall Time
tr
tf
1.2
1.2
ns
ns
10% to 90% Values
10% to 90% Values
Relative Intensity Noise
Total Jitter
RIN
TJ
-120
0.55
dB/Hz
ns
2
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Disable Input Voltage -- Low
Disable Input Voltage -- High
Shut Off Time for TxDis
IIL
IIH
-350
mA
mA
mV
V
350
1600
-1.58
-0.74
0.8
VIH - VIL
VIL - VCC
VIH - VCC
VTDIS,L
VTDIS,H
tDIS
300
-2.0
-1.1
3
3
V
0
V
V
TX Output Enabled
TX Ouput Disabled
Vcc – 1.3
Vcc
1
ms
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V4.0
3
Optoway
BTRS-5780-1590G
**********************************************************************************************************************************************************************
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3. 47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
Pin
Pa
---
-5
---
---
---
---
---
-28
---
dBm
dBm
dBm
dBm
dB
1
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
---
-28
---
Transition: low to high
Transition: high to low
Pd
-38
1.0
1480
20
4.0
1520
nm
dB
2
ORL
Electrical
Data Output Voltage – Low
Data Output Voltage – High
SD Output Voltage -- Low
SD Output Voltage -- High
Signal Detect Assert Time
Signal Detect Deassert Time
VOL - VCC
VOH - VCC
VOL - VCC
VOH - VCC
ASMAX
-2.0
-1.1
-2.0
-1.1
-1.58
-0.74
-1.58
-0.74
100
V
V
3
3
V
V
3
3
ms
OFF to ON
ON to OFF
ANSMAX
300
ms
Notes: 1.Minimum sensitivity and saturation levels at BER 1E-=10 for a 223-1 PRBS with 72 ones and 72 zeros.
2. At least 30 dB optical isolation for the wavelength 1580 to 1620 nm.
3. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
CONNECTION DIAGRAM
PIN
1
Symbol
VEE
Notes
r
Directly connect this pin to the receiver ground plane
+3.3V dc power for the receiver section
Active high on this indicates a received optical signal.
Receiver Dataout Bar. See recommended circuit schematic
Receiver Dataout. See recommended circuit schematic
+3.3V dc power for the transmitter section
2
3
VCC
SD
r
4
5
RD-
RD+
VCC
6
t
7
8
VEE
TxDis
t
Directly connect this plan to the transmitter ground plane
Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module
To enable module connect to TTL logic low “0”
9
TD+
TD-
MS
Transmitter Data In. See recommended circuit schematic
Transmitter Data In Bar. See recommended circuit schematic
Mounting Studs. Connect to Chassis Ground
10
MS
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V4.0
4
Optoway
BTRS-5780-1590G
**********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
1) Recommended DC Coupled Interface Circuit
PHY DEVICE
Vcc3.3V
MICROSTRIP1
TD-
terminate in transceiver inputs
Z=50R
LVPECL
100R
MICROSTRIP2
TD+
Z=5OR
R3
130R
R4
130R
L1
TDis(LVTTL)
Vcc3.3V
1uH
C1
C2
C5
C6
10nF
10nF
10uF
10uF
L2
U1
SFF2X5
1uH
C3
C4
Terminate at device input
Vcc3.3V
10nF
10uF
RD+
R5
100R
LVPECL
MICROSTRIP3
Z=50R
MICROSTRIP4
RD-
Z=5OR
Vcc3.3V
R1
150R
R2
150R
R6
130R
SD
R7
82R
2) Recommended AC Coupled Interface Circuit
Vcc3.3V
Terminate in Tranceiver inputs
PHY DEVICE
R8
82R
R9
82R
R10
130R
R11
130R
Vcc3.3V
C7
MICROSTRIP5
TD-
Z=50R
MICROSTRIP6
100nF
C8
LVPECL
TD+
Z=5OR
100nF
R14
130R
R15
130R
L3
TDis(LVTTL)
Vcc3.3V
1uH
C9
10nF
C10
C15
10nF
C16
10uF
10uF
L4
1uH
U2
SFF2X5
Vcc3.3V
C11
10nF
C12
R16
130R
Vcc3.3V
10uF
RD+
Vcc3.3V
R17
82R
MICROSTRIP7
LVPECL
C13
100nF
C14
100nF
R18
130R
Z=50R
MICROSTRIP8
RD-
Z=5OR
Vcc3.3V
R19
82R
R12
150R
R13
150R
R20
130R
SD
R21
82R
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V4.0
5
Optoway
BTRS-5780-1590G
**********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) SC Receptacle
A) Standard Case
BTRS-5780-1590G / BTRS-5780A-1590G
B) Extended Case
BTRS-5780E-1590G / BTRS-5780AE-1590G
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V4.0
6
Optoway
BTRS-5780-1590G
**********************************************************************************************************************************************************************
2) Pigtail
BTRS-5780-1590-SP50G / BTRS-5780A-1590-SP50G
Note: Length L is 50± 3 cm. Other pigtail’s length is available upon request.
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V4.0
BTRS-5780-1590G_09 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
BTRS-5780A-1510-SPG | OPTOWAY | 1510 nm TX / 1590 nm RX , 3.3V / 622 Mbps RoHS Compliant Single-Fiber Transceiver | 获取价格 | |
BTRS-5780A-1510G | OPTOWAY | 1510 nm TX / 1590 nm RX , 3.3V / 622 Mbps RoHS Compliant Single-Fiber Transceiver | 获取价格 | |
BTRS-5780A-1590-SP50G | OPTOWAY | Transceiver, Through Hole Mount, | 获取价格 | |
BTRS-5780A-1590-SPG | OPTOWAY | 1590 nm TX / 1510 nm RX , 3.3V / 622 Mbps RoHS Compliant Single-Fiber Transceiver | 获取价格 | |
BTRS-5780A-1590G | OPTOWAY | 1590 nm TX / 1510 nm RX , 3.3V / 622 Mbps RoHS Compliant Single-Fiber Transceiver | 获取价格 | |
BTRS-5780AE-1590G | OPTOWAY | Transceiver, Through Hole Mount, | 获取价格 | |
BTRS-5780E-1590G | OPTOWAY | Transceiver, Through Hole Mount, | 获取价格 | |
BTRS-5820-SP50G | OPTOWAY | Transceiver, Through Hole Mount, | 获取价格 | |
BTRS-5820-SPG | OPTOWAY | 1310 nm TX / 1490 nm RX , 3.3V / 622 Mbps RoHS Compliant SFF Single-Fiber Transceiver | 获取价格 | |
BTRS-5820A-SP50G | OPTOWAY | Transceiver, Through Hole Mount, | 获取价格 |
BTRS-5780-1590G_09 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6