GBS-72120G [OPTOWAY]
5V / 1550 nm / 1.25 Gbps Single-Mode Gigabit Interface Converter (GBIC); 5V / 1550纳米/ 1.25 Gbps的单模千兆位接口转换器( GBIC )型号: | GBS-72120G |
厂家: | OPTOWAY TECHNOLOGY INC |
描述: | 5V / 1550 nm / 1.25 Gbps Single-Mode Gigabit Interface Converter (GBIC) |
文件: | 总4页 (文件大小:84K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1
Optoway
GBS-72120G
***********************************************************************************************************************************************************************
GBS-72120G
(RoHS Compliant)
5V / 1550 nm / 1.25 Gbps Single-Mode Gigabit Interface Converter (GBIC)
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Compliant with Gigabit Interface Converter (GBIC)
Specification Rev. 5.5
The GBS-72120G series optical transceivers meet the
Gigabit Interface Converter (GBIC) specification Rev. 5.5.
It satisfies the optical interface specifications defined in
IEEE 802.3z Drift 5.0 for Gigabit Ethernet. This module is
designed for single mode fiber and operates at a nominal
wavelength of 1550 nm. The transmitter section uses a
multiple quantum well 1550 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
Avalanche photodetector preamplifier mounted in an
optical header and a limiting post-amplifier IC. A PECL
input / output logic interface is used. TTL RX-LOS output
simplifies interface to external circuitry. A 20-pin SCA-2
host connector is used to connect the converter to the host
system.
l Compliant with IEEE-802.3z / D5.0 Gigabit Ethernet
1000 BASE-ZX
l 120 km using Single-mode Optic Cable
l 1550 nm DFB Transmitter
l APD High Sensitivity Receiver
l 32 dB Power Budget at Least
l Hot Pluggable Module with Duplex SC Connector
l SCA-2 Host Connector
l Single +5 V Power Supply
l RoHS Compliant
l Differential PECL Inputs and Outputs
l TTL RX-LOS Output
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l Bus Extension Application
l Data Storage
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
1000
BASE
Distance Wavelength Package
Temp. TX Power RX Sens.
RoHS
(dBm) Compliant
-32 Yes
(km)
(nm)
(oC)
(dBm)
GBS-72120G
1.25
120
1550 DFB SC GBIC 0 to 70
5 to 0
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Topr
Vcc
Min
Max
85
Units
Notes
Storage Temperature
Operating Temperature
Power Supply Voltage
Input Voltage
-40
-5
-0.5
-0.5
oC
oC
V
70
6
---
Vcc
V
Relative Humidity
RH
5
95
%
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Operating Temperature
Data Rate
Symbol
Min
Typ
5
Max
5.25
300
70
Units
V
Vcc
ITX + IRX
Topr
4.75
200
mA
oC
0
1000
1250
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
2
Optoway
GBS-72120G
***********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 4.75V < Vcc < 5.25V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Po
l
0
1500
---
30
9
---
1550
---
5
1580
1
dBm
nm
nm
dB
1
-20 dB Width
Dl
SMSR
ER
---
dB
Coupled Power Ratio
Optical Rise Time
CPR
tr
9
dB
ns
0.26
0.26
-120
227
-35
20% to 80% value
20% to 80% value
Optical Fall Time
Relative Intensity Noise
Total Jitter
tf
RIN
TJ
ns
dB/Hz
ps
2
Max. Po at TX-Disable Asserted
Electrical
dBm
Differential Input Voltage
Transmit Fault Load
VIH - VIL
TX-FAULTLOAD
VTX-FAULT-L
VTX-FAULT-H
VTX-DISABLE-L
VTX-DISABLE-H
t_off
0.65
4.7
2.0
10
Vp-p
kΩ
V
3
Transmit Fault Output-Low
Transmit Fault Output-High
TX-Disable Input - Low
TX-Disable Input - High
TX-Disable Assert Time
TX-Disable Negate Time
Time to initialize, includes reset
of TX-FAULT
0.0
0.5
Vcc – 0.5
0
Vcc + 0.3
0.8
V
V
2.0
Vcc + 0.3
10
V
ms
ms
ms
t-on
1
t-int
300
ms
ms
TX FAULT from fault to
assertion
TX-Disable time to start reset
t-fault
t-reset
100
10
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. Measured with a 27-1 PRBS.
3. Pull-up resistor on host Vcc.
Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
---
-9
1.0
1100
12
---
-32
---
dBm
dBm
dB
4
4
Maximum Input Power
Signal detect – Hysteresis
Wavelength of Operation
Optical Return Loss
Pin
---
---
1600
nm
ORL
Pa
dB
dBm
dBm
RX-LOS – Asserted
---
---
---
-32
---
Transition: low to high
Transition: high to low
RX-LOS – Deasserted
Pd
-42
Electrical
Differential Output Voltage
Data Output Rise Time
Data Output Fall Time
VOH - VOL
TrRX-DAT
TfRX-DAT
0.37
2.0
0.35
0.35
10
Vp-p
ns
ns
RX-LOS of Light Load
RX-LOS Output Voltage --- Low
RX-LOS Outpu Voltage --- High
RX-LOS Assert Time (off to on)
RX-LOS Deassert Time (on to off)
RX-LOSLOAD
VRX-LOS-L
VRX-LOS-H
TA,RX-LOS
TD,RX-LOS
4.7
0
2.4
kΩ
V
V
5
0.5
Vcc
100
100
ms
ms
Notes: 4. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
5. Pull-up resistor on host Vcc.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
3
Optoway
GBS-72120G
***********************************************************************************************************************************************************************
PIN ASSIGNMENT
PIN
Signal Name
Sequence
Description
RX-LOS
2
1
Receiver Loss of Signal, logic high, open collector compatible,
4.7K to 10K ohm pull-up to VCCT on host
Receiver Ground
RGND
2
2
2
2
2
2
2
2
2
2
3
4
RGND
Receiver Ground
TTL Low
MOD-DEF(0)
MOD-DEF(1)
MOD-DEF(2)
TX-DIABLE
TGND
5
SCL Serial Clock Signal
6
SDA Serial Data Signal
7
8
Transmitter Disable, logic high, open collector compatible
Transmitter Ground
TGND
9
Transmitter Ground
TX-FAULT
10
Transmitter Fault, logic high, open collector compatible, 4.7K to
10K ohm pull-up to VCCT on GBIC
Receiver Ground
RGND
1
1
1
1
2
2
1
1
1
1
11
12
13
14
15
16
17
18
19
20
-RX-DAT
+RX-DAT
RGND
Receiver Data Bar, Differential PECL, AC coupled
Receiver Data, Differential PECL, AC coupled
Receiver Ground
VCCR
Receiver +5V Supply
VCCT
TGND
Transmitter +5V Supply
Transmitter Ground
+TX-DAT
-TX-DAT
TGND
Transmitter Data, Differential PECL, AC coupled
Transmitter Data Bar, Differential PECL, AC coupled
Transmitter Ground
A sequence value of 1 indicates that the signal is in the first group to engage during plugging of a module. A sequence value of 2
indicates that the signal is the second and last group. The two guide pins on the connector are electrically connected to the transceiver circuit
ground. These two guide pins make contact with circuit prior to sequence 1 signals.
Module Definition
Module Definition
MOD-DEF(0)
PIN 4
MOD-DEF (1)
PIN 5
MOD-DEF (2)
PIN 6
Interpretation by
Host
4
TTL Low
SCL
SDA
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
4
Optoway
GBS-72120G
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
相关型号:
©2020 ICPDF网 联系我们和版权申明