SPB-3740BLG [OPTOWAY]

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Single-Fiber SFP Transceiver; 1550纳米TX / 1310纳米RX , 3.3V / 155 Mbps的单纤SFP收发器
SPB-3740BLG
型号: SPB-3740BLG
厂家: OPTOWAY TECHNOLOGY INC    OPTOWAY TECHNOLOGY INC
描述:

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Single-Fiber SFP Transceiver
1550纳米TX / 1310纳米RX , 3.3V / 155 Mbps的单纤SFP收发器

文件: 总5页 (文件大小:172K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
1
Optoway  
SPB-3740G  
***********************************************************************************************************************************************************************  
SPB-3740G / SPB-3740BG / SPB-3740LG / SPB-3740BLG (RoHS Compliant)  
1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Single-Fiber SFP Transceiver  
**********************************************************************************************************************************************************************  
FEATURES  
DESCRIPTION  
l 1-Fiber Bi-Directional SFP Optical Transceiver  
l Compliant with IEEE 802.3ah-2004 100BASE-BX  
l Simplex SC Connector: SPB-3740G  
l Simplex LC Connector: SPB-3740LG  
l 1550 nm DFB LD Transmitter  
l 1310 nm Receiver  
The SPB-3740G series is small form factor pluggable  
module for IEEE 802.3ah 100BASE-BX and OC-3/STM-1  
SONET/SDH single fiber communications by using 1550  
nm transmitter and 1310 nm receiver. It is with the SFP  
20-pin connector to allow hot plug capability. The  
transmitter section uses a multiple quantum well 1550 nm  
laser and is a class 1 laser compliant according to  
International Safety Standard IEC 60825. The receiver  
section uses an integrated 1310 nm detector preamplifier  
(IDP) mounted in an optical header and a limiting  
post-amplifier IC.  
l Distance Up to 40 km  
l AC/AC Coupling according to MSA  
l Single +3.3 V Power Supply  
l RoHS Compliant  
l 0 to 70oC Operating : SPB-3740G  
l -10 to 85oC Operating : SPB-3740BG  
l Class 1 Laser International Safety Standard IEC 60825  
Compliant  
LASER SAFETY  
This single mode transceiver is a Class 1 laser product. It  
complies with IEC 60825 and FDA 21 CFR 1040.10 and  
1040.11. The transceiver must be operated within the  
specified temperature and voltage limits. The optical ports of  
the module shall be terminated with an optical connector or  
with a dust plug.  
APPLICATIONS  
l WDM Fast Ethernet Links  
l SONET/SDH Equipment Interconnect  
l Fiber Channel Links  
ORDER INFORMATION  
P/No.  
Bit Rate  
(Mb/s)  
Distance  
(km)  
40  
TX  
(nm)  
RX  
Package  
Temp TX Power RX Sens.  
RoHS  
Compliant  
Yes  
(nm)  
1310  
1310  
1310  
1310  
(oC)  
(dBm)  
(dBm)  
-33  
SPB-3740G  
125/155  
125/155  
125/155  
125/155  
1550 DFB  
1550 DFB  
1550 DFB  
1550 DFB  
SC SFP  
SC SFP  
LC SFP  
LC SFP  
0 to 70  
-3 to -8  
SPB-3740BG  
SPB-3740LG  
SPB-3740BLG  
40  
-10 to 85 -3 to -8  
0 to 70 -3 to -8  
-10 to 85 -3 to -8  
-33  
Yes  
40  
-33  
Yes  
40  
-33  
Yes  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0  
2
Optoway  
SPB-3740G  
**********************************************************************************************************************************************************************  
Absolute Maximum Ratings  
Parameter  
Symbol  
Tstg  
Min  
Max  
Units  
oC  
oC  
Notes  
Storage Temperature  
-40  
0
85  
70  
Operating Case Temperature  
Topr  
SPB-3740G  
-10  
0
GND  
85  
SPB-3740BG  
Power Supply Voltage  
Input Voltage  
Vcc  
---  
3.6  
Vcc  
V
V
Output Current  
Iout  
0
30  
mA  
Recommended Operating Conditions  
Parameter  
Power Supply Voltage  
Power Supply Current  
Operating Case Temperature  
Symbol  
Min  
Typ  
3.3  
Max  
3.5  
Units / Notes  
Vcc  
3.1  
V
mA  
ICC (TX+RX)  
Topr  
200  
300  
70  
85  
0
-10  
oC / SPB-3740G  
oC / SPB-3740BG  
Mb/s  
Data Rate  
125/155  
200  
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
1
Optical  
Optical Transmit Power  
Output Center Wavelength  
Output Spectrum Width  
Extinction Ratio  
Po  
l
Dl  
ER  
-8  
1480  
---  
---  
-3  
1580  
1
dBm  
nm  
nm  
---  
---  
-20 dB width  
10  
---  
dB  
Output Eye  
Compliant with Bellcore GR-253-CORE and ITU recommendation G.957  
Optical Rise Time  
tr  
tf  
2
2
ns  
ns  
10% to 90% Values  
10% to 90% Values  
Optical Fall Time  
Relative Intensity Noise  
Total Jitter  
RIN  
TJ  
-116  
1.0  
dB/Hz  
ns  
2
Electrical  
Data Input Current Low  
Data Input Current High  
Differential Input Voltage  
TX Disable Input Voltage Low  
TX Disable Input Voltage High  
TX Disable Assert Time  
TX Disable Deassert Time  
TX Fault Output Voltage -- Low  
TX Fault Output Voltage -- High  
IIL  
IIH  
VIH - VIL  
TDIS, L  
-350  
mA  
mA  
V
350  
2.4  
0.5  
0
Peak-to-Peak  
0.5  
V
3
3
TDIS, H  
TASSERT  
TDEASSERT  
TFaultL  
2.0  
Vcc  
10  
V
ms  
ms  
V
1
0.5  
0
4
4
TFaultH  
2.0  
Vcc+0.3  
V
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.  
2. Measured with a 223-1 PRBS.  
3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.  
4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).  
**********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0  
3
Optoway  
SPB-3740G  
**********************************************************************************************************************************************************************  
Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3. 5V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Sensitivity  
---  
Pin  
Pa  
---  
-8  
---  
---  
---  
---  
---  
-33  
---  
dBm  
dBm  
dBm  
dBm  
dB  
5
Maximum Input Power  
Signal Detect -- Asserted  
Signal Detect -- Deasserted  
Signal detect -- Hysteresis  
Wavelength of Operation  
Optical Return Loss  
---  
-33  
---  
Transition: low to high  
Transition: high to low  
Pd  
-43  
1.0  
1260  
14  
1360  
nm  
dB  
6
ORL  
Electrical  
Differential Output Voltage  
Output LOS Voltage -- Low  
Output LOS Voltage High  
Signal Detect Assert Time  
Signal Detect Deassert Time  
V
OH VOL  
VOL  
0.6  
0
2.0  
0.5  
V
V
7
VOH  
2.0  
Vcc+0.3  
100  
V
ms  
ms  
7
ASMAX  
OFF to ON  
ON to OFF  
ANSMAX  
300  
Notes: 5. Minimum sensitivity and saturation levels at BER 1E-12 for a 27-1 PRBS.  
6. At least 30 dB optical isolation for the wavelength 1480 to 1580 nm.  
7. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).  
RECOMMENDED CIRCUIT SCHEMATIC  
(1,17,20)  
VeeT  
3
Tx_DISABLE  
Tx_DISABLE  
Tx_FAULT  
2
Tx_FAULT  
4.7K to 10KΩ  
TD +  
TD -  
18  
19  
16  
TD +  
LD  
Z=50Ω  
Z=50Ω  
100Ω  
Driver  
TD -  
1μH  
Vcc 3.3V  
VccT  
10μF  
10nF  
10μF  
10nF  
10nF  
1μH  
SerDes  
IC  
Protocol  
IC  
15  
12  
13  
8
VccR  
RD -  
10μF  
RD -  
Z=50Ω  
Z=50Ω  
100Ω  
POST  
Amp  
RD +  
RD +  
depending on SERDES  
4.7K to 10KΩ  
LOS  
LOSS OF SINGAL  
(9,10,11,14)  
6
VeeR  
MODULE DETECT  
MOD_DEF(0)  
MOD_DEF(1)  
MOD_DEF(2)  
5
4
SCL  
SDA  
EEPROM  
4.7K to 10KΩ  
4.7K to 10KΩ  
SFP module  
Vcc 3.3V  
4.7K to 10KΩ  
**********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0  
4
Optoway  
SPB-3740G  
**********************************************************************************************************************************************************************  
CONNECTION DIAGRAM  
PIN  
1
Signal Name  
TX GND  
Description  
Transmitter Ground  
Transmitter Fault Indication  
PIN  
11 RX GND  
12 RX DATA OUT- Inverse Receiver Data Out  
Signal Name  
Description  
Receiver Ground  
2
TX Fault  
3
TX Disable  
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out  
on high or open)  
4
5
6
MOD-DFE2  
MOD-DEF1  
MOD-DEF0  
Modulation Definition 2 Two wires 14 RX GND  
serial ID Interface  
Receiver Ground  
Modulation Definition 1 Two wires 15 Vcc RX  
serial ID Interface  
Receiver Power 3.3V±5%  
Transmitter Power 3.3V±5%  
Modulation Definition 0 Ground in 16 Vcc TX  
Module  
7
8
9
N/C  
Not Connected  
Loss of Signal  
17 TX GND  
Transmitter Ground  
Transmitter Data In  
LOS  
18 TX DATA IN+  
19 TX DATA IN-  
20 TX GND  
RX GND  
Receiver Ground  
Receiver Ground  
Inverse Transmitter Data In  
Transmitter Ground  
10 RX GND  
Module Definition  
Module Definition  
MOD-DEF2  
PIN 4  
MOD-DEF1  
MOD-DEF0  
Interpretation by Host  
PIN 5  
PIN 6  
4
SDA  
SCL  
LV-TTL Low  
Serial module definition  
protocol  
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector  
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the  
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.  
**********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0  
5
Optoway  
SPB-3740G  
**********************************************************************************************************************************************************************  
PACKAGE DIAGRAM  
Units in mm  
A) SC SFP  
A) LC SFP  
Note: Specifications subject to change without notice.  
**********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0  

相关型号:

SPB-3740BLWG

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740BWG

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740G

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740G_08

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740G_15

155 Mbps Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740G_2015

155 Mbps Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740LG

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740LWG

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740WG

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740WG_08

1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740WG_15

155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPB-3740WG_2015

155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY