SPB-7910BLG [OPTOWAY]
1490 nm TX / 1310 nm RX , 3.3V / 1250 Mbps Single-Fiber SFP Transceiver; 1490毫微米TX / 1310纳米RX ， 3.3V / 1250 Mbps的单纤SFP收发器
| 型号： | SPB-7910BLG |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 1490 nm TX / 1310 nm RX , 3.3V / 1250 Mbps Single-Fiber SFP Transceiver |
| 文件： | 总5页 (文件大小：172K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
SPB-7910G
***********************************************************************************************************************************************************************
SPB-7910G / SPB-7910BG / SPB-7910LG / SPB-7910BLG (RoHS Compliant)
1490 nm TX / 1310 nm RX , 3.3V / 1250 Mbps Single-Fiber SFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l 1-Fiber Bi-Directional SFP Optical Transceiver
l Compliant with IEEE 802.3ah-2004 1000BASE-BX
l Simplex SC Connector: SPB-7910G
l Simplex LC Connector: SPB-7910LG
l 1490 nm DFB LD Transmitter
l 1310 nm Receiver
The SPB-7910G series is small form factor pluggable
module for Gigabit Ethernet 1000BASE-BX and Fibre
Channel single fiber communications by using 1490 nm
transmitter and 1310 nm receiver. It is with the SFP 20-pin
connector to allow hot plug capability. The transmitter
section uses a multiple quantum well 1490 nm DFB laser
and is a class 1 laser compliant according to International
Safety Standard IEC 60825. The receiver section uses an
integrated 1310 nm detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
l Distance Up to 10 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operating: SPB-7910G
l -10 to 85oC Operating: SPB-7910BG
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
APPLICATIONS
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
l Fibre Channel Links
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
Distance
(km)
10
TX
(nm)
RX
(nm)
Package
Temp TX Power
RX Sens.
(dBm)
-20
RoHS
Compliant
Yes
(oC)
(dBm)
-3 to -9
-3 to -9
-3 to -9
-3 to -9
SPB-7910G
1.25
1.25
1.25
1.25
1490 DFB 1310
1490 DFB 1310
1490 DFB 1310
1490 DFB 1310
SC SFP
SC SFP
LC SFP
LC SFP
0 to 70
SPB-7910BG
SPB-7910LG
SPB-7910BLG
10
-10 to 85
0 to 70
-20
Yes
10
-20
Yes
10
-10 to 85
-20
Yes
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0
2
Optoway
SPB-7910G
***********************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
Max
Units
oC
oC
Notes
Storage Temperature
-40
0
85
70
Operating Case Temperature
Topr
SPB-7910G
-10
0
0
85
SPB-7910BG
Relative Humidity
Power Supply Voltage
Input Voltage
RH
Vcc
---
85
3.6
Vcc
%
V
V
Non condensing
GND
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Operating Case Temperature
Symbol
Vcc
Min
Typ
3.3
Max
3.5
Units / Notes
3.1
V
mA
ICC (TX+RX)
Topr
200
300
70
85
0
-10
oC / SPB-7910G
oC / SPB-7910BG
Mb/s
Data Rate
1250
1300
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
1
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Po
l
-9
1480
-3
1500
1
dBm
nm
nm
dB
-20 dB width
σl
SMSR
ER
30
9
dB
Output Eye
Compliant with IEEE 802.3z
Optical Rise Time
tr
tf
0.26
0.26
ns
ns
20% to 80% Values
20% to 80% Values
Optical Fall Time
Relative Intensity Noise
Total Jitter
RIN
TJ
-120
0.227
dB/Hz
ns
2
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
IIL
IIH
-350
mA
mA
V
350
2.4
0.5
VIH - VIL
TDIS, L
0.5
0
Peak-to-Peak
V
3
3
TDIS, H
TASSERT
TDEASSERT
TFaultL
2.0
Vcc
10
V
ms
ms
V
1
0
2.0
0.5
Vcc+0.3
4
4
TFaultH
V
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. Measured with a 27-1 PRBS.
3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0
3
Optoway
SPB-7910G
***********************************************************************************************************************************************************************
Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3. 5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
Pin
Pa
---
-3
---
---
---
---
---
-20
---
dBm
dBm
dBm
dBm
dB
5
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
---
-20
---
Transition: low to high
Transition: high to low
Pd
-31
1.0
1260
14
1360
nm
dB
6
ORL
Electrical
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage – High
Signal Detect Assert Time
Signal Detect Deassert Time
V
OH – VOL
VOL
0.6
0
2.0
0.5
V
V
7
VOH
2.0
Vcc+0.3
100
V
ms
ms
7
ASMAX
OFF to ON
ON to OFF
ANSMAX
300
Notes: 5. Minimum sensitivity and saturation levels at BER 1E-12 for a 27-1 PRBS.
6. At least 30 dB optical isolation for the wavelength 1480 to 1500 nm.
7. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
VeeT
3
Tx_DISABLE
Tx_DISABLE
Tx_FAULT
2
Tx_FAULT
4.7K to 10KΩ
TD +
TD -
18
19
16
TD +
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Driver
1μH
Vcc 3.3V
VccT
10μF
10nF
10μF
10nF
10nF
1μH
SerDes
IC
Protocol
IC
15
12
VccR
RD -
10μF
RD -
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD + 13
RD +
depending on SERDES
4.7K to 10KΩ
LOS
8
LOSS OF SINGAL
(9,10,11,14)
6
VeeR
MODULE DETECT
MOD_DEF(0)
MOD_DEF(1)
MOD_DEF(2)
5
4
SCL
SDA
EEPROM
4.7K to 10KΩ
4.7K to 10KΩ
SFP module
Vcc 3.3V
4.7K to 10KΩ
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0
4
Optoway
SPB-7910G
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
Signal Name
TX GND
Description
Transmitter Ground
Transmitter Fault Indication
PIN
11 RX GND
12 RX DATA OUT- Inverse Receiver Data Out
Signal Name
Description
Receiver Ground
2
TX Fault
3
TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
on high or open)
4
5
6
MOD-DFE2
MOD-DEF1
MOD-DEF0
Modulation Definition 2 – Two wires 14 RX GND
serial ID Interface
Receiver Ground
Modulation Definition 1 – Two wires 15 Vcc RX
serial ID Interface
Receiver Power – 3.3V±5%
Transmitter Power – 3.3V±5%
Modulation Definition 0 – Ground in 16 Vcc TX
Module
7
8
9
N/C
Not Connected
Loss of Signal
17 TX GND
Transmitter Ground
Transmitter Data In
LOS
18 TX DATA IN+
19 TX DATA IN-
20 TX GND
RX GND
Receiver Ground
Receiver Ground
Inverse Transmitter Data In
Transmitter Ground
10 RX GND
Module Definition
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
MOD-DEF0
Interpretation by Host
PIN 5
PIN 6
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0
5
Optoway
SPB-7910G
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
A) SC SFP
A) LC SFP
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2006 V3.0
相关型号：
SPB-7910BLWG
1490 nm TX / 1310 nm RX , 3.3V / 1250 Mbps Digital Diagnostic Single-Fiber SFP Transceiver
OPTOWAY
SPB-7910BWG
1490 nm TX / 1310 nm RX , 3.3V / 1250 Mbps Digital Diagnostic Single-Fiber SFP Transceiver
OPTOWAY
SPB-7910LWG
1490 nm TX / 1310 nm RX , 3.3V / 1250 Mbps Digital Diagnostic Single-Fiber SFP Transceiver
OPTOWAY
SPB-7910WG
1490 nm TX / 1310 nm RX , 3.3V / 1250 Mbps Digital Diagnostic Single-Fiber SFP Transceiver
OPTOWAY
SPB-7910WG_08
1490 nm TX / 1310 nm RX , 3.3V / 1250 Mbps Digital Diagnostic Single-Fiber SFP Transceiver
OPTOWAY
©2020 ICPDF网 联系我们和版权申明