SPM-5701WG_2015 [OPTOWAY]
622 Mbps Digital Diagnostic Multi-Mode Single-Fiber SFP Transceiver;型号: | SPM-5701WG_2015 |
厂家: | OPTOWAY TECHNOLOGY INC |
描述: | 622 Mbps Digital Diagnostic Multi-Mode Single-Fiber SFP Transceiver |
文件: | 总6页 (文件大小:177K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1
Optoway
SPM-5701WG
***********************************************************************************************************************************************************************
SPM-5701WG / SPM-5701BWG / SPM-5701AWG
SPM-5701LWG / SPM-5701BLWG / SPM-5701ALWG
(SC BIDI SFP) (RoHS Compliant)
(LC BIDI SFP)
1550 nm TX / 1310 nm RX , 3.3V / 622 Mbps Digital Diagnostic Multi-Mode Single-Fiber SFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l 1-Fiber Bi-Directional SFP Optical Transceiver
l Simplex SC Connector: SPM-5701WG
l Simplex LC Connector: SPM-5701LWG
l SFF-8472 Digital Diagnostic Function
l 1550 nm LD Transmitter
The SPM-5701WG series is small form factor pluggable
module for multi-mode fiber Fast Ethernet, Fibre Channel
and OC-12 /
STM-4 SONET / SDH single fiber
communications by using 1550 nm transmitter and 1310 nm
receiver. It is with the SFP 20-pin connector to allow hot
plug capability. Digital diagnostic functions are available via
an I2C. The transmitter section uses a multiple quantum
well 1550 nm laser and is a class 1 laser compliant
according to International Safety Standard IEC 60825. The
receiver section uses an integrated 1310 nm detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC.
l 1310 nm Receiver
l Distance: 0 to 1000 m
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operating : SPM-5701WG
l -10 to 85oC Operating : SPM-5701BWG
l -40 to 85oC Operating : SPM-5701AWG
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
APPLICATIONS
l WDM Fast Ethernet Links
l SONET/SDH Equipment Interconnect
l Fibre Channel Links
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
Distance
(m)
TX
RX
Package
Temp TX Power RX Sens.
RoHS
Compliant
Yes
(nm)
1550
1550
1550
(nm)
1310
1310
1310
(oC)
(dBm)
(dBm)
-26
SPM-5701WG
622
622
622
622
622
622
0 to 1000
0 to 1000
0 to 1000
SC SFP with DMI 0 to 70 -8 to -15
SC SFP with DMI -10 to 85 -8 to -15
SC SFP with DMI -40 to 85 -8 to -15
LC SFP with DMI 0 to 70 -8 to -15
LC SFP with DMI -10 to 85 -8 to -15
LC SFP with DMI -40 to 85 -8 to -15
SPM-5701BWG
SPM-5701AWG
SPM-5701LWG
SPM-5701BLWG
SPM-5701ALWG
-26
Yes
-26
Yes
0 to 1000
0 to 1000
0 to 1000
1550
1550
1550
1310
1310
1310
-26
Yes
Yes
Yes
-26
-26
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0
2
Optoway
SPM-5701WG
**********************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
Max
Units
oC
oC
Notes
SPM-5701WG
Storage Temperature
-40
0
85
70
Operating Case Temperature
Topr
-10
-40
0
85
85
3.6
Vcc
SPM-5701BWG
SPM-5701AWG
Power Supply Voltage
Input Voltage
Vcc
---
V
V
GND
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Operating Case Temperature
Symbol
Min
Typ
3.3
Max
3.5
300
70
85
85
Units / Notes
Vcc
ICC (TX+RX)
Topr
3.1
V
200
mA
0
oC / SPM-5701WG
oC / SPM-5701BWG
oC / SPM-5701AWG
Mb/s
-10
-40
100
Data Rate
622
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Po
l
-15
1480
---
---
-8
1580
10
dBm
nm
1
---
---
nm
dB
RMS (σ)
Dl
ER
tr
8.2
---
Optical Rise Time
Optical Fall Time
1
2
ns
ns
10% to 90% Values
10% to 90% Values
tf
Relative Intensity Noise
Total Jitter
RIN
TJ
-116
0.5
dB/Hz
ns
2
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
IIL
IIH
-350
mA
mA
V
350
2.4
0.5
Vcc
10
VIH - VIL
TDIS, L
TDIS, H
TASSERT
TDEASSERT
TFaultL
0.5
0
2.0
Peak-to-Peak
V
V
3
3
ms
ms
V
1
0.5
0
4
4
TFaultH
2.0
Vcc+0.3
V
Notes: 1. Output power is power coupled into a 62.5/125 mm multi-mode fiber.
2. Measured with a 27-1 PRBS.
3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0
3
Optoway
SPM-5701WG
**********************************************************************************************************************************************************************
Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3. 5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
Pin
Pa
Pd
---
-8
---
---
---
---
---
-26
---
dBm
dBm
dBm
dBm
dB
5
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
---
-26
---
Transition: low to high
Transition: high to low
-40
1.0
1260
14
1360
nm
dB
6
ORL
Electrical
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage – High
Signal Detect Assert Time
Signal Detect Deassert Time
V
OH – VOL
VOL
0.6
0
2.0
0.5
V
V
7
VOH
2.0
Vcc+0.3
100
V
ms
ms
7
ASMAX
OFF to ON
ON to OFF
ANSMAX
300
Notes: 5. Minimum sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS.
6. At least 30 dB optical isolation for the wavelength 1480 to 1580 nm.
7. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
VeeT
3
Tx_DISABLE
Tx_DISABLE
Tx_FAULT
2
Tx_FAULT
4.7K to 10KΩ
TD +
TD -
18
19
16
TD +
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Driver
1μH
Vcc 3.3V
VccT
10μF
10nF
10μF
10nF
10nF
1μH
SerDes
IC
Protocol
IC
15
12
13
8
VccR
RD -
10μF
RD -
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD +
RD +
depending on SERDES
4.7K to 10KΩ
LOS
LOSS OF SINGAL
(9,10,11,14)
6
VeeR
MODULE DETECT
MOD_DEF(0)
MOD_DEF(1)
MOD_DEF(2)
5
4
SCL
SDA
EEPROM
4.7K to 10KΩ
4.7K to 10KΩ
SFP module
Vcc 3.3V
4.7K to 10KΩ
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0
4
Optoway
SPM-5701WG
**********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
Signal Name
TX GND
Description
Transmitter Ground
Transmitter Fault Indication
PIN
11 RX GND
12 RX DATA OUT- Inverse Receiver Data Out
Signal Name
Description
Receiver Ground
2
TX Fault
3
TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
on high or open)
4
5
6
MOD-DFE2
MOD-DEF1
MOD-DEF0
Modulation Definition 2 – Two wires 14 RX GND
serial ID Interface
Receiver Ground
Modulation Definition 1 – Two wires 15 Vcc RX
serial ID Interface
Receiver Power – 3.3V±5%
Transmitter Power – 3.3V±5%
Modulation Definition 0 – Ground in 16 Vcc TX
Module
7
8
9
N/C
Not Connected
Loss of Signal
17 TX GND
Transmitter Ground
Transmitter Data In
LOS
18 TX DATA IN+
19 TX DATA IN-
20 TX GND
RX GND
Receiver Ground
Receiver Ground
Inverse Transmitter Data In
Transmitter Ground
10 RX GND
Module Definition
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
MOD-DEF0
Interpretation by Host
PIN 5
PIN 6
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0
5
Optoway
SPM-5701WG
**********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
A) SC SFP
B) LC SFP
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0
6
Optoway
SPM-5701WG
**********************************************************************************************************************************************************************
Revision History
Version
Subject
Release Date
1.0
2.0
3.0
Initial datasheet
2005/12/1
2006/3/1
2008/1/1
Combine datasheet of SC BIDI SFP and LC BIDI SFP
Revise SC BIDI SFP package diagram for high port density use
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0
相关型号:
©2020 ICPDF网 联系我们和版权申明