SPM-8101WG_2015 [OPTOWAY]
4.25 Gbps Digital Diagnostic LC MULTI-MODE SFP TRANSCEIVER;
| 型号： | SPM-8101WG_2015 |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 4.25 Gbps Digital Diagnostic LC MULTI-MODE SFP TRANSCEIVER |
| 文件： | 总5页 (文件大小：152K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
SPM-8101WG
***********************************************************************************************************************************************************************
SPM-8101WG
(RoHS Compliant)
3.3V / 1310 nm / 4.25 Gbps Digital Diagnostic LC MULTI-MODE SFP TRANSCEIVER
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Speed up to 4.25 Gbps
The SPM-8101WG series multi-mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as 4x/2x/1x Fibre
Channel and 1000BASE Gigabit Ethernet. It is with the SFP
20-pin connector to allow hot plug capability. Digital
diagnostic functions are available via an I2C series bus
specified in the SFP MSA SFF-8472. This module is
designed for multi-mode fiber and operates at a nominal
wavelength of 1310 nm. The transmitter section uses a
multiple quantum well Laser and is a Class 1 laser
compliant according to International Safety Standard IEC
60825. The receiver section uses an integrated GaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with 4x / 2 x / 1x Fibre Channel
l Compliant with IEEE 802.3z Gigabit Ethernet
l SFF-8472 Digital Diagnostic Function
l Up to 500 m links with MMF Cables at 4.25 Gbps
l Up to 1000 m links with MMF Cable at 2.125 Gbps and
1.25 Gbps
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operation
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
Distance Wavelength
Package
Temp.
(oC)
0 to 70
TX Power RX Sens.
RoHS
Compliant
Yes
(m)
(nm)
(dBm)
(dBm)
SPM-8101WG
4 / 2 / 1 500 / 1000*
1310
LC SFP with DMI
-2.5 to -9
-15
*: up to 500 m at 4.25Gbps & up to 1000 m at 2.125 / 1.25 Gbps on 50/125 & 62.5 mm MMF.
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
-40
0
Max
85
Units
oC
Notes
Storage Temperature
Operating Case Temperature
Power Supply Voltage
Topr
70
oC
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Case Temperature
Power Supply Current
Data Rate
Symbol
Min
3.1
0
Typ
Max
3.5
Units / Notes
Vcc
Topr
3.3
V
oC
70
ICC (TX+RX)
250
mA
Gb/s
1
4.25
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008 V2.0
2
Optoway
SPM-8101WG
***********************************************************************************************************************************************************************
Transmitter Specifications ( 0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Po
-9
---
-2.5
dBm
1
Output Center Wavelength
Output Spectrum Width
1260
---
1310
---
1360
4
nm
nm
l
Dl
tr
RMS (σ)
Optical Rise Time at 4.25Gbps
Optical Fall Time at 4.25 Gbps
Relative Intensity Noise
80
ps
20 % to 80% Values
20 % to 80% Values
tf
80
ps
RIN
-120
dB/Hz
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
IIL
IIH
-350
mA
mA
V
350
2.4
0.5
Vcc
10
VIH - VIL
TDIS, L
0.5
0
Peak-to-Peak
V
2
2
TDIS, H
TASSERT
TDEASSERT
TFaultL
2.0
V
ms
ms
1
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
0
0.5
V
V
3
3
TFaultH
2.0
Vcc+0.3
1. Output power is power coupled into a 62.5/125 mm MM fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications ( 0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity at 4.25Gbps
Sensitivity at 2.125 / 1.25Gbps
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Sens1
Sens2
Pin
-15
-17
dBm
dBm
dBm
dBm
dBm
dB
4
4
4
-3
---
Pa
-17
---
Transition: low to high
Transition: high to low
Pd
-30
1.0
---
---
---
1260
1360
nm
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage -- High
V
OH – VOL
VOL
0.6
0
2.0
0.5
V
V
V
5
5
VOH
2.0
Vcc+0.3
4. Measured at 27-1 PRBS at BER 1E-12.
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008 V2.0
3
Optoway
SPM-8101WG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
Signal Name
TX GND
Description
Transmitter Ground
Transmitter Fault Indication
PIN
11 RX GND
12 RX DATA OUT- Inverse Receiver Data Out
Signal Name
Description
Receiver Ground
2
TX Fault
3
TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
on high or open)
4
5
6
MOD-DFE2
MOD-DEF1
MOD-DEF0
Modulation Definition 2 – Two wires 14 RX GND
serial ID Interface
Receiver Ground
Modulation Definition 1 – Two wires 15 Vcc RX
serial ID Interface
Receiver Power – 3.3V±5%
Transmitter Power – 3.3V±5%
Modulation Definition 0 – Ground in 16 Vcc TX
Module
7
8
9
N/C
Not Connected
Loss of Signal
17 TX GND
Transmitter Ground
Transmitter Data In
LOS
18 TX DATA IN+
19 TX DATA IN-
20 TX GND
RX GND
Receiver Ground
Receiver Ground
Inverse Transmitter Data In
Transmitter Ground
10 RX GND
Module Definition
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
MOD-DEF0
Interpretation by Host
PIN 5
PIN 6
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008 V2.0
4
Optoway
SPM-8101WG
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
VeeT
3
Tx_DISABLE
Tx_FAULT
Tx_DISABLE
Tx_FAULT
2
4.7K to 10KΩ
TD +
TD -
18
19
16
TD +
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Driver
1μH
Vcc 3.3V
VccT
10μF
10nF
10μF
10nF
10nF
1μH
SerDes
IC
Protocol
IC
15
12
13
8
VccR
RD -
10μF
RD -
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD +
RD +
depending on SERDES
4.7K to 10KΩ
LOS
LOSS OF SINGAL
(9,10,11,14)
6
VeeR
MODULE DETECT
MOD_DEF(0)
MOD_DEF(1)
MOD_DEF(2)
5
4
SCL
SDA
EEPROM
4.7K to 10KΩ
4.7K to 10KΩ
SFP module
Vcc 3.3V
4.7K to 10KΩ
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008 V2.0
5
Optoway
SPM-8101WG
***********************************************************************************************************************************************************************
Revision History
Version
Subject
Release Date
1.0
2.0
Initial datasheet
Revise package diagram for high port density use
2006/5/1
2008/1/1
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008 V2.0
相关型号：
SPM-8600BLG
1310 nm TX / 1550 nm RX , 3.3V / 4.25 Gbps 1-Fiber Multi-Mode LC SFP Transceiver
OPTOWAY
SPM-8700BLG
1550 nm TX / 1310 nm RX , 3.3V / 4.25 Gbps 1-Fiber Multi-Mode LC SFP Transceiver
OPTOWAY
©2020 ICPDF网 联系我们和版权申明