SPM-9100VW-2TG_2015 [OPTOWAY]
3 Gb/s Dual Optical Multi-Mode Digital Diagnostic Transmitter;
| 型号： | SPM-9100VW-2TG_2015 |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 3 Gb/s Dual Optical Multi-Mode Digital Diagnostic Transmitter |
| 文件： | 总5页 (文件大小：112K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
SPM-9100VW-2TG
***********************************************************************************************************************************************************************
SPM-9100VW-2TG
(RoHS Compliant)
850 nm / 3 Gb/s Dual Optical Multi-Mode Digital Diagnostic Transmitter
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l SMPTE 297-2006 Compatible
l Speed from 50 Mbps to 3Gbps with up to 1000 m
Multi-mode Fiber
The SPM-9100VW-2TG is a dual channel optical
multi-mode transmitter module designed to transmit optical
serial digital signals as defined in SMPTE 297-2006. It
supports from 50 Mbps to 3 Gbps and is specifically
designed for transmitted the SMPTE 259M, SMPTE 344M,
SMPTE 292M and SMPTE 424M SDI pathological
patterns. It is with the SFP 20-pin connector to allow hot
plug capability. Digital diagnostic functions are available
via an I2C. It is with two independent 850 nm VCSEL
transmitters. Each transmitter can transmit signal from 50
Mbps to 3 Gbps with up to 1000 m of multi-mode fiber
when using the SPM-9100VW-2RG as the receiver. A
maximum distance of 300 m is achievable with 3Gbps
pathological signals.
l Distance up to 300 m for 3G-SDI
l Support Video Pathological Patterns for SD-SDI,
HD-SDI and 3G-SDI
l Dual 850 nm Transmitter with Duplex LC
l Based on Industry Standard SFP
l SFF-8472 Digital Diagnostic Function
l Two Independent TTL Laser Disable Input
l Single +3.3 V Power Supply
l RoHS-6 Compliant
l 0 to 70oC Operation
l Hot Pluggable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l SMPTE 297-2006 Compliant Electrical-to-Optical
Interfaces
l High-density Video Routers
ORDER INFORMATION
P/No.
Type
Bit Rate
(Mb/s)
TX1
RX1
TX2
Package
Temp
(oC)
RoHS
Compliant
λ
λ
Power
(dBm)
Power
(dBm)
(nm)
850
(nm)
850
SPM-9100VW-2TG
2-TX
50 to 3000
-2 to -7
-2 to -7 LC SFP with DMI 0 to 70
Yes
RELATED PRODUCTS
P/No.
Type
Bit Rate
(Mb/s)
RX2
Package
Temp
(oC)
RoHS
Compliant
λ
λ
Sen.
Sen.
(nm)
850
(dBm)
(nm)
850
(dBm)
SPM-9100VW-2RG
2-RX
50 to 3000
0 to -15
0 to -15 LC SFP with DMI 0 to 70
Yes
LINK DISTANCE
Transmitter
Receiver
SDI
Bit Rate
Max. Link Distance (m)
3G-SDI
HD-SDI
SD-SDI
2.97Gbps
1.485Gbps
270Mbos
300
500
SPM-9100VW-2TG
SPM-9100VW-2RG
1,000
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
11/1/2008 V1.0
2
Optoway
SPM-9100VW-2TG
***********************************************************************************************************************************************************************
ABSOLUTE MAXIMUM RATINGS
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
ESD Tolerance on all pins
Symbol
Tstg
Tc
Min
-40
-20
0
Max
85
85
4
Units
Notes
oC
oC
Vcc
V
1
KV HBM
Relative Humidity
---
5
95
% RH
non-condensing
Recommended Operating Conditions
Parameter
Symbol
Vcc
Tc
Min
3.13
0
Typ
Max
3.47
70
3000
180
Units / Notes
Power Supply Voltage
Operating Case Temperature
Baud Rate
3.3
V
oC
Mb/s
mA
50
Power Supply Current
Icc
125
Transmitter Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Po
l
-7
830
---
5
-2
870
1
dBm
nm
nm
dB
1
850
7.5
RMS (σ)
Dl
ER
RIN
Relative Intensity Noise
-118
135
270
800
1.5
dB/Hz
ps
2, SMPTE 424M
2, SMPTE 292M
2, SMPTE 344M
2, SMPTE 259M
ps
Optical Rise Time / Fall Time
tr / tf
ps
ns
Electrical
Differential Input Voltage
Disable Input Voltage -- Low
Disable Input Voltage -- High
SCL, SDA
VIH - VIL
VTDIS,L
VTDIS,H
VOH
200
0
1200
0.8
mVp-p
AC coupled input
TX Output Enabled
TX Ouput Disabled
V
V
V
V
2.0
2.5
0
Vcc+0.3
Vcc+0.3
0.5
VOL
1. Output power is power coupled into a 62.5/125 mm multi-mode fiber.
2. 20% to 80%, unfiltered.
MODULE DEFINITION
Module Definition
PIN 5
PIN 6
SDA
Interpretation by Host
4
SCL
Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector
(NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM
protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0
3
Optoway
SPM-9100VW-2TG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
TX1_DIS
Vee
TX1-
NC
TX1+
NC
Vee
Vee
Vcc TX1
SCL
Vcc TX2
SDA
Vee
Vee
NC
TX2+
NC
TX2-
PIN
1
2
3
4
5
6
7
Name
Function
Notes
Vee
NC
NC
Signal Ground
No Connection
No Connection
Signal Ground
Serial I2C Clock
Serial I2C Data
Signal Ground
Vee
SCL
SDA
Vee
8
9
10
TX2+
TX2-
TX2_DIS
Positive Transmitter Data In (2)
Negative Transmitter Data In (2)
Transmitter Disable (2)
AC coupled differential lines with 100 ohm
differential termination inside the module
Internal 4.7 kΩ pull-up. The bias current and
modulation current are turned off if TX2_DIS =
HIGH.
11
12
13
14
15
16
17
18
19
20
Vee
NC
NC
Vee
Vcc TX2
Vcc TX1
Vee
TX1+
TX1-
TX1_DIS
Signal Ground
No Connection
No Connection
Signal Ground
Power Supply (2)
+3.3V±5%
+3.3V±5%
Power Supply (1)
Signal Ground
Positive Transmitter Data In (1)
Negative Transmitter Data In (1)
Transmitter Disable (1)
AC coupled differential lines with 100 ohm
differential termination inside the module
Internal 4.7 kΩ pull-up. The bias current and
modulation current are turned off if TX1_DIS =
HIGH.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0
4
Optoway
SPM-9100VW-2TG
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
Vee
TX1_DIS
TX1 -
TX1 +
Vee
TX1_DIS
TD -
VCC 3.3V
10K 10K
NC
100Ω Differential
Re-Clocker
VCC 3.3V
NC
TD +
Vee
100nF
100nF
10uF
I2C CLK
SCL
SDA
Vee
Vcc_TX1
Vcc_TX2
Vee
1uH
I2C DATA
1uH
TD +
10uF
100nF
10uF
TX2 +
TX2 -
TX2_DIS
NC
Re-Clocker
100Ω Differential
NC
TD -
TX2_DIS
Vee
1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs
are internally biased and may not need external bias resistor.
PACKAGE DIAGRAM (Units in mm)
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0
5
Optoway
SPM-9100VW-2TG
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
Subject
Release Date
1.0
Initial datasheet
2008/11/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0
相关型号：
SPM-9600AG
1310 nm TX / 1550 nm RX , 3.3V / 2.5 Gbps Multi-Mode Single-Fiber SFP Transceiver
OPTOWAY
SPM-9600ALG
1310 nm TX / 1550 nm RX , 3.3V / 2.5 Gbps Multi-Mode Single-Fiber SFP Transceiver
OPTOWAY
SPM-9600ALWG
1310 nm TX / 1550 nm RX , 3.3V / 2.5 Gbps Digital Diagnostic Multi-Mode Single-Fiber SFP Transceiver
OPTOWAY
SPM-9600AMG
1310 nm TX / 1550 nm RX , 3.3V / Multirate Digital Diagnostic Multi-Mode Single-Fiber SFP Transceiver
OPTOWAY
SPM-9600AMLG
1310 nm TX / 1550 nm RX , 3.3V / Multirate Digital Diagnostic Multi-Mode Single-Fiber SFP Transceiver
OPTOWAY
©2020 ICPDF网 联系我们和版权申明