SPS-4381W-D48G [OPTOWAY]
8.5 Gbps/ DWDM / 80 km Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER; 8.5 Gbps的/ DWDM / 80公里数字诊断LC SFP +单模收发器型号: | SPS-4381W-D48G |
厂家: | OPTOWAY TECHNOLOGY INC |
描述: | 8.5 Gbps/ DWDM / 80 km Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER |
文件: | 总6页 (文件大小:198K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1
Optoway
SPS-4381W-DXXG
***********************************************************************************************************************************************************************
SPS-4381W-DXXG
(RoHS Compliant)
8.5 Gbps/ DWDM / 80 km Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 8.5 Gbps Bi-directional Data Links
l Complaint to SFP+ MSA
The SPS-4381W-DXXG series single mode transceiver
is small form factor pluggable module for bi-directional
serial optical data communications such as 8x/4x/2x Fibre
Channel.
l Compliance with Fibre Channel FC-PI-4 800-SM-LC-L
l Compliant with 4G and, 2G Fibre Channel
l Temperature-stabilized DWDM EML Transmitter
l 100 GHz ITU Grid, C Band
It is with the SFP 20-pin connector to allow hot plug
capability. Digital diagnostic functions are available via an
I2C. This module is designed for single mode fiber and
operates at a nominal wavelength of 100GHz ITU Grid, C
Band DWDM wavelength. A guaranteed minimum optical
link budget of 23 dB is offered. The transmitter section
l Distance up to 80 km
l SFF-8472 Digital Diagnostic Function
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS 6/6 Compliant
consists
of
a
temperature-stabilized
DWDM
l 0 to 70oC Operating
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
l Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
l Multi-rate 8x / 4x / 2x Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 V2.0
2
Optoway
SPS-4381W-DXXG
***********************************************************************************************************************************************************************
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
Power Budget Wavelength
Package
Temp.
(oC)
RoHS
Compliant
(dB)
(nm)
SPS-4381W-DXXG
8 / 4 / 2
> 23
DWDM*
SFP+ with DMI
0 to 70
Yes
FC-PI-4
*: XX: 100GHz ITU Grid wavelength (Please see below)
Channel #
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Product code
Frequency (THz)
192.1
192.2
192.3
192.4
192.5
192.6
192.7
192.8
192.9
193.0
193.1
193.2
193.3
193.4
193.5
193.6
193.7
193.8
193.9
194.0
194.1
194.2
194.3
194.4
194.5
194.6
194.7
194.8
194.9
195.0
195.1
195.2
195.3
195.4
195.5
195.6
195.7
195.8
195.9
196.0
Center Wavelength (nm)
1560.61
1559.79
1558.98
1558.17
1557.36
1556.55
1555.75
1554.94
1554.13
1553.33
1552.52
1551.72
1550.92
1550.12
1549.32
1548.51
1547.72
1546.92
1546.12
1545.32
1544.53
1543.73
1542.94
1542.14
1541.35
1540.56
1539.77
1538.98
1538.19
1537.40
1536.61
1535.82
1535.04
1534.25
1533.47
1532.68
1531.90
1531.12
1530.33
1529.55
Label
SPS-4381W-D21G
SPS-4381W-D22G
SPS-4381W-D23G
SPS-4381W-D24G
SPS-4381W-D25G
SPS-4381W-D26G
SPS-4381W-D27G
SPS-4381W-D28G
SPS-4381W-D29G
SPS-4381W-D30G
SPS-4381W-D31G
SPS-4381W-D32G
SPS-4381W-D33G
SPS-4381W-D34G
SPS-4381W-D35G
SPS-4381W-D36G
SPS-4381W-D37G
SPS-4381W-D38G
SPS-4381W-D39G
SPS-4381W-D40G
SPS-4381W-D41G
SPS-4381W-D42G
SPS-4381W-D43G
SPS-4381W-D44G
SPS-4381W-D45G
SPS-4381W-D46G
SPS-4381W-D47G
SPS-4381W-D48G
SPS-4381W-D49G
SPS-4381W-D50G
SPS-4381W-D51G
SPS-4381W-D52G
SPS-4381W-D53G
SPS-4381W-D54G
SPS-4381W-D55G
SPS-4381W-D56G
SPS-4381W-D57G
SPS-4381W-D58G
SPS-4381W-D59G
SPS-4381W-D60G
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
D32
D33
D34
D35
D36
D37
D38
D39
D40
D41
D42
D43
D44
D45
D46
D47
D48
D49
D50
D51
D52
D53
D54
D55
D56
D57
D58
D59
D60
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 V2.0
3
Optoway
SPS-4381W-DXXG
***********************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
Symbol
Tstg
Topr
Min
-40
0
Max
85
70
Units
oC
Notes
oC
Vcc
-0.5
3.6
V
Receiver Input for Damage
Mip
-3
dBm
Average Power
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Case Temperature
Power Supply Current
Data Rate
Symbol
Min
3.13
0
Typ
Max
3.47
70
Units / Notes
Vcc
Topr
ICC (TX+RX)
3.3
V
oC
mA
Gb/s
350
8.5
500
2.125
Transmitter Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Po, AVG
ER
Min
Typ
Max
Units
dBm
dB
Notes
Average Launch Power
Extinction Ratio
-1
3
1
8.2
Center Wavelength Spacing
Transmitter Center Wavelength
-- over life time
Output Spectrum Width
Side Mode Suppression Ratio
Relative Intensity Noise
Transmitter Dispersion Penalty
Average Launch Power of OFF
Transmitter
100
X
GHz
pm
2
3
X-100
X+100
1
l c
---
30
nm
dB
dB/Hz
dB
-20 dB width
Dl
SMSR
RIN
-130
3
Up to 80km SMF
TDP
-30
dBm
1. Output power is power coupled into a 9/125 mm single-mode fiber.
2. Corresponds to approximately 0.8 nm.
3. X = specified ITU Grid wavelength.
Receiver Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
dBm
dBm
dBm
dBm
nm
Notes
Sensitivity
-24
4
Receiver Overload
LOS -- Deasserted
LOS -- Asserted
PMAX
LOSD
LOSA
l c
-7
---
---
---
---
-27
---
Transition: low to high
Transition: high to low
-35
1480
Wavelength of Operation
1580
4. Measured with average power; BER < 10-12 and PRBS 27-1.
Electrical Characteristics
Parameter
Symbol
Min
Typ
Max
Units
Notes
High-Speed Signal (CML) Interface Specification
Input Data Rate
2.125
8.5
Gb/s
Ω
Differential Input Impedance
Differential Data Input Amplitude
Output Data Rate
Rin
100
150
1200
700
mVpp
Gb/s
Ω
Internally AC coupled
Internally AC coupled
2.125
8.5
100
600
Differential Output Impedance
Differential Data Output
Amplitude
Rout
350
2.0
mVpp
Low-Speed Signal (LVTTL) Interface Specification
Input High Voltage
Vcc+0.3
V
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 V2.0
4
Optoway
SPS-4381W-DXXG
***********************************************************************************************************************************************************************
Input Low Voltage
Output High Voltage
Output Low Voltage
GND
2.4
0.8
Vcc
0.5
V
V
V
GND
CONNECTION DIAGRAM
PIN Signal Name
Description
Transmitter Signal Ground
PIN Signal Name
Description
Receiver Signal Ground
1
2
VEE
T
11 VEE
R
TX_Fault
Transmitter Fault Indication. Logic “1” Output 12 RD-
= Laser Fault. Logic “0” Output = Normal
Operation
Inverse Receiver Data Out
3
4
5
TX_Disable Logic “1” Input (or no connection) = Laser off, 13 RD+
Logic “0” = Laser on.
Receiver Data Out
SDA
Modulation Definition 2 – Two wires serial ID 14 VEE
R
Receiver Signal Ground
Receiver Power – 3.3V±5%
Interface
SDL
Modulation Definition 1 – Two wires serial ID 15 VCC
R
Interface
6
7
MOD-ABS Modulation Definition 0 – Ground in Module
16 VCC
T
Transmitter Power – 3.3V±5%
RS0
RX Rate Select (LVTTL). This pin has an 17 VEE
internal 30k pulldown to ground. A signal on
this pin will not affect module performance.
T
Transmitter Signal Ground
8
9
RX_LOS
RS1
Loss of Signal Out (OC).
18 TD+
Transmitter Data In
TX Rate Select (LVTTL). This pin has an 19 TD-
internal 30k pulldown to ground. A signal on
this pin will not affect module performance.
Inverse Transmitter Data In
10 VEE
R
Receiver Signal Ground
20 VEE
T
Transmitter Signal Ground
MODULE DEFINITION
Module Definition
PIN 4
PIN 5
PIN 6
Interpretation by Host
4
SDA
SCL
MOD-ABS
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector
(NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire
serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 V2.0
5
Optoway
SPS-4381W-DXXG
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
Vee T
3
Tx_DISABLE
Tx_FAULT
Tx_DISABLE
Tx_FAULT
2
10 KΩ
TD +
TD -
18
19
16
TD +
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Driver
4 .7 μH
22 μF
Vcc 3.3V
Vcc T
0.1μF
0.1μF
0.1μF
SerDes
IC
0.1μF
Protocol
IC
15
12
13
8
Vcc R
RD -
22 μF
4 .7 μH
RD -
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD +
RD +
depending on SERDES
10 KΩ
LOS
Vee R
RS1
LOSS OF SINGAL
(10,11,14)
9
7
TX Rate Select
RX Rate Select
30K Ω
RS0
30K Ω
6
5
4
MOD_ABS
SCL
MODULE DETECT
SCL
SDA
EEPROM
SDA
10 KΩ
10 KΩ
10 KΩ
SFP+ module
Vcc 3.3V
PACKAGE DIAGRAM
Units in mm
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 V2.0
6
Optoway
SPS-4381W-DXXG
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
Subject
Release Date
1.0
2.0
Initial datasheet
2010/8/1
Update 1) TX output power: -1 to +3 dBm
2) RX sensitivity: -24 dBm
2010/12/1
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 V2.0
相关型号:
©2020 ICPDF网 联系我们和版权申明