SPS-53120W-CXX0G_2015 [OPTOWAY]

622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER;
SPS-53120W-CXX0G_2015
型号: SPS-53120W-CXX0G_2015
厂家: OPTOWAY TECHNOLOGY INC    OPTOWAY TECHNOLOGY INC
描述:

622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

文件: 总5页 (文件大小:150K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
1
Optoway  
SPS-53120W-CXX0G  
***********************************************************************************************************************************************************************  
SPS-53120W-CXX0G / SPS-53120BW-CXX0G  
(RoHS Compliant)  
3.3V / CWDM / 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER  
***********************************************************************************************************************************************************************  
FEATURES  
DESCRIPTION  
l Hot-Pluggable SFP Footprint LC Optical Transceiver  
l Small Form-Factor Pluggable (SFP) MSA compatible  
l Compliant with Long-Reach SONET OC-12 / SDH  
STM-4  
The SPS-53120W-CXX0G series single mode transceiver  
is small form factor pluggable module for bi-directional  
serial optical data communications such as SONET OC-12 /  
SDH STM-4 and Fiber Channel. It is with the SFP 20-pin  
connector to allow hot plug capability. Digital diagnostic  
functions are available via an I2C. This module is designed  
for single mode fiber and operates at a nominal wavelength  
of CWDM wavelength. There are eighteen center  
wavelengths available from 1270 nm to 1610 nm, with each  
step 20 nm. A guaranteed minimum optical link budget of  
34 dB is offered The transmitter section uses a multiple  
quantum well CWDM DFB laser and is a class 1 laser  
compliant according to International Safety Standard  
IEC-60825. The receiver section uses an integrated InGaAs  
detector preamplifier (IDP) mounted in an optical header  
and a limiting post-amplifier IC.  
l SFF-8472 Digital Diagnostic Function  
l 18 Wavelength (λ): 1270 nm to 1610 nm CWDM DFB  
LD Transmitter  
l 34 dB Power Budget at Least  
l AC/AC Coupling according to MSA  
l Single +3.3 V Power Supply  
l RoHS Compliant  
l 0 to 70oC Operation: SPS-53120W-CXX0G  
l -5 to 85oC Operation: SPS-53120BW-CXX0G  
l Class 1 Laser International Safety Standard IEC-60825  
Compliant  
APPLICATIONS  
LASER SAFETY  
l ATM Switches and Routers  
l SONET / SDH Switch Infrastructure  
l XDSL Applications  
This single mode transceiver is a Class 1 laser product. It  
complies with IEC-60825 and FDA 21 CFR 1040.10 and  
1040.11. The transceiver must be operated within the  
specified temperature and voltage limits. The optical ports  
of the module shall be terminated with an optical connector  
or with a dust plug.  
l Metro Edge Switching  
ORDER INFORMATION  
P/No.  
Bit Rate SONET  
Power  
Wavelength  
(nm)  
CWDM* LC SFP with DMI  
Package  
Case Temp. TX Power RX Sens.  
(Mb/s)  
/SDH Budget (dB)  
(oC)  
(dBm)  
5 to 0  
5 to 0  
(dBm)  
-34  
-34  
SPS-53120W-CXX0G  
SPS-53120BW-CXX0G  
622  
622  
> 34  
> 34  
0 to 70  
CWDM* LC SFP with DMI -5 to 85  
CWDM* Wavelength (0 to 70oC)  
Central  
Wavelength  
Min.  
(nm)  
Typ.  
(nm)  
Max.  
(nm)  
Clasp Color  
Central  
Wavelength  
Min.  
(nm)  
Typ.  
(nm)  
Max.  
(nm)  
Clasp Color  
Code  
Code  
-C270  
-C290  
-C310  
-C330  
-C350  
-C370  
-C390  
-C410  
-C430  
1264.5  
1284.5  
1304.5  
1324.5  
1344.5  
1364.5  
1384.5  
1404.5  
1424.5  
1270  
1290  
1310  
1330  
1350  
1370  
1390  
1410  
1430  
1277.5  
1297.5  
1317.5  
1337.5  
1357.5  
1377.5  
1397.5  
1417.5  
1437.5  
Light Purple  
Sky Blue  
Yellow Green  
Yellow Ocher  
Pink  
-C450  
-C470  
-C490  
-C510  
-C530  
-C550  
-C570  
-C590  
-C610  
1444.5  
1464.5  
1484.5  
1504.5  
1524.5  
1544.5  
1564.5  
1584.5  
1604.5  
1450  
1470  
1490  
1510  
1530  
1550  
1570  
1590  
1610  
1457.5  
1477.5  
1497.5  
1517.5  
1537.5  
1557.5  
1577.5  
1597.5  
1617.5  
Yellow Orange  
Gray  
Violet  
Blue  
Green  
Yellow  
Orange  
Red  
Beige  
White  
Silver  
Black  
Brown  
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0  
2
Optoway  
SPS-53120W-CXX0G  
***********************************************************************************************************************************************************************  
Absolute Maximum Ratings  
Parameter  
Symbol  
Tstg  
Min  
Max  
Units  
oC  
Notes  
Storage Temperature  
-40  
0
-5  
85  
70  
85  
3.6  
Operating Case Temperature  
Topr  
oC  
SPS-53120W-CXX0G  
SPS-53120BW-CXX0G  
Power Supply Voltage  
Vcc  
-0.5  
V
Recommended Operating Conditions  
Parameter  
Power Supply Voltage  
Operating Case Temperature  
Symbol  
Min  
3.13  
0
Typ  
Max  
3.47  
70  
Units / Notes  
Vcc  
Topr  
3.3  
V
oC / SPS-53120W-CXX0G  
-5  
85  
oC / SPS-53120BW-CXX0G  
Power Supply Current  
Data Rate  
ICC (TX+RX)  
200  
622  
300  
mA  
Mb/s  
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Optical Transmit Power  
Output Center Wavelength  
Output Spectrum Width  
Side Mode Suppression Ratio  
Extinction Ratio  
Po  
l
0
---  
l c  
5
dBm  
nm  
nm  
dB  
1
2
l c 5.5  
l c +7.5  
---  
30  
10  
---  
1
-20 dB Width  
Dl  
SMSR  
ER  
---  
---  
dB  
Output Eye  
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957  
Optical Rise Time  
tr  
tf  
1.2  
1.2  
ns  
ns  
10 % to 90% Values  
10 % to 90% Values  
Optical Fall Time  
Relative Intensity Noise  
Electrical  
RIN  
-120  
dB/Hz  
Data Input Current Low  
Data Input Current High  
Differential Input Voltage  
TX Disable Input Voltage Low  
TX Disable Input Voltage High  
TX Disable Assert Time  
TX Disable Deassert Time  
TX Fault Output Voltage -- Low  
TX Fault Output Voltage -- High  
IIL  
IIH  
-350  
mA  
mA  
V
350  
2.4  
0.5  
Vcc  
10  
VIH - VIL  
TDIS, L  
0.5  
0
Peak-to-Peak  
V
3
3
TDIS, H  
TASSERT  
TDEASSERT  
TFaultL  
2.0  
V
ms  
ms  
1
0
2.0  
0.8  
Vcc+0.3  
V
V
4
4
TFaultH  
1. Output power is power coupled into a 9/125 mm single mode fiber.  
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.  
3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.  
4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).  
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Sensitivity  
Sens  
Pin  
Pa  
-34  
dBm  
dBm  
dBm  
dBm  
dB  
4
4
Maximum Input Power  
Signal Detect -- Asserted  
Signal Detect -- Deasserted  
Signal detect -- Hysteresis  
Wavelength of Operation  
Electrical  
-9  
---  
-47  
1.0  
-34  
---  
Transition: low to high  
Transition: high to low  
Pd  
---  
---  
---  
1100  
1620  
nm  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0  
3
Optoway  
SPS-53120W-CXX0G  
***********************************************************************************************************************************************************************  
Differential Output Voltage  
Output LOS Voltage -- Low  
Output LOS Voltage -- High  
V
OH VOL  
VOL  
0.6  
0
2.0  
0.8  
V
V
V
5
5
VOH  
2.0  
Vcc+0.3  
4. Measured at 223-1 PRBS at BER 1E-10.  
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).  
CONNECTION DIAGRAM  
PIN  
1
Signal Name  
TX GND  
Description  
Transmitter Ground  
Transmitter Fault Indication  
PIN  
11 RX GND  
12 RX DATA OUT- Inverse Receiver Data Out  
Signal Name  
Description  
Receiver Ground  
2
TX Fault  
3
TX Disable  
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out  
on high or open)  
4
5
6
MOD-DFE2  
MOD-DEF1  
MOD-DEF0  
Modulation Definition 2 Two wires 14 RX GND  
serial ID Interface  
Receiver Ground  
Modulation Definition 1 Two wires 15 Vcc RX  
serial ID Interface  
Receiver Power 3.3V±5%  
Transmitter Power 3.3V±5%  
Modulation Definition 0 Ground in 16 Vcc TX  
Module  
7
8
9
N/C  
Not Connected  
Loss of Signal  
17 TX GND  
Transmitter Ground  
Transmitter Data In  
LOS  
18 TX DATA IN+  
19 TX DATA IN-  
20 TX GND  
RX GND  
Receiver Ground  
Receiver Ground  
Inverse Transmitter Data In  
Transmitter Ground  
10 RX GND  
Module Definition  
Module Definition  
MOD-DEF2  
PIN 4  
MOD-DEF1  
MOD-DEF0  
Interpretation by Host  
PIN 5  
PIN 6  
4
SDA  
SCL  
LV-TTL Low  
Serial module definition  
protocol  
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector  
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the  
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0  
4
Optoway  
SPS-53120W-CXX0G  
***********************************************************************************************************************************************************************  
RECOMMENDED CIRCUIT SCHEMATIC  
(1,17,20)  
VeeT  
3
Tx_DISABLE  
Tx_FAULT  
Tx_DISABLE  
Tx_FAULT  
2
4.7K to 10KΩ  
TD +  
TD -  
18  
19  
16  
TD +  
TD -  
LD  
Z=50Ω  
Z=50Ω  
100Ω  
Driver  
1μH  
Vcc 3.3V  
VccT  
10μF  
10nF  
10μF  
10nF  
10nF  
1μH  
SerDes  
IC  
Protocol  
IC  
15  
12  
13  
8
VccR  
RD -  
10μF  
RD -  
Z=50Ω  
Z=50Ω  
100Ω  
POST  
Amp  
RD +  
RD +  
depending on SERDES  
4.7K to 10KΩ  
LOS  
LOSS OF SINGAL  
(9,10,11,14)  
6
VeeR  
MODULE DETECT  
MOD_DEF(0)  
MOD_DEF(1)  
MOD_DEF(2)  
5
4
SCL  
SDA  
EEPROM  
4.7K to 10KΩ  
4.7K to 10KΩ  
SFP module  
Vcc 3.3V  
4.7K to 10KΩ  
PACKAGE DIAGRAM  
Units in mm  
Note: Specifications subject to change without notice.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0  
5
Optoway  
SPS-53120W-CXX0G  
***********************************************************************************************************************************************************************  
Revision History  
Version  
Subject  
Release Date  
1.0  
2.0  
3.0  
Initial datasheet  
2004/1/1  
2005/12/1  
2008/1/1  
Add 1270 to 1450 nm CWDM.  
1. Revise package diagram for high port density use  
2. Add clasp color codes for 18 wavelengths  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V3.0  

相关型号:

SPS-53120W-D20G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D21G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D22G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D23G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D24G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D25G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D26G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D27G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D28G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D29G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D30G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

SPS-53120W-D31G

Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY