SPS-7110VG_2015 [OPTOWAY]
1.5 Gb/s Medium Power SM Video SFP Transceiver;
| 型号： | SPS-7110VG_2015 |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 1.5 Gb/s Medium Power SM Video SFP Transceiver |
| 文件： | 总6页 (文件大小：166K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
SPS-7110VG
***********************************************************************************************************************************************************************
SPS-7110VG
(RoHS Compliant)
1310 nm / 1.5 Gb/s Medium Power SM Video SFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l SMPTE 292M/297M/259M Compatible
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Speed from 50 Mbps to 1.5 Gbps
l Distance up to 21 km for 1.5G-SDI
l Support Video Pathological Patterns for SD-SDI and
HD-SDI
The SPS-7110VG is a single mode transceiver module
designed to transmit/receive optical serial digital signals as
defined in SMPTE 292M/297M/259M. It supports from 50
Mbps to 1.5 Gbps and is specifically designed for
transmitted the SMPTE 292M, SMPTE 297M and SMPTE
259M SDI pathological patterns. It is with the SFP 20-pin
connector to allow hot plug capability. It is with 1310 nm
laser transmitters. The transmitter can transmit signal from
50 Mbps to 1.5 Gbps with up to 30 km of single-mode fiber.
A maximum distance of 21 km is achievable with 1.5 Gbps
pathological signals.
l Single +3.3 V Power Supply
l RoHS-6 Compliant
l 0 to 70oC Operation
l Hot Pluggable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l SMPTE 292M/297M/259M Compliant
Electrical-to-Optical Interfaces
l High-density Video Routers
ORDER INFORMATION
P/No.
Type
Bit Rate
(Mb/s)
TX
RX
Package
LC SFP
Temp
(oC)
RoHS
Compliant
λ
λ
Power
(dBm)
Sen.
(dBm)
(nm)
1310
(nm)
SPS-7110VG
TRX
50 to 1500
0 to -7 1260/1620 0 to -20
0 to 70
Yes
LINK DISTANCE
SDI
Bit Rate
Max. Link Distance (km)
HD-SDI
SD-SDI
1.485Gbps
270Mbps
21
30
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2008 V1.0
2
Optoway
SPS-7110VG
***********************************************************************************************************************************************************************
ABSOLUTE MAXIMUM RATINGS
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
ESD Tolerance on all pins
Symbol
Tstg
Tc
Min
-40
0
Max
85
70
4
Units
Notes
oC
oC
Vcc
0
V
1
KV HBM
Relative Humidity
---
5
95
% RH
non-condensing
Recommended Operating Conditions
Parameter
Symbol
Vcc
Tc
Min
3.135
0
Typ
Max
3.465
70
1500
280
Units / Notes
Power Supply Voltage
Operating Case Temperature
Baud Rate
3.3
V
oC
Mb/s
mA
50
1485
200
Power Supply Current
Icc
Transmitter Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Po
l
-7
1290
---
0
1330
3
dBm
nm
1
1310
7.5
At 25oC
RMS (σ)
nm
Dl
ER
RIN
5
dB
Relative Intensity Noise
-120
270
800
1.5
dB/Hz
ps
2, SMPTE 292M
Optical Rise Time / Fall Time
tr / tf
ps
2, SMPTE 344M
2, SMPTE 259M
ns
Electrical
Differential Input Voltage
Disable Input Voltage -- Low
Disable Input Voltage -- High
SCL, SDA
VIH - VIL
VTDIS,L
VTDIS,H
VOH
200
0
1200
0.8
mVp-p
AC coupled input
TX Output Enabled
TX Ouput Disabled
V
V
V
V
2.0
2.5
0
Vcc+0.3
Vcc+0.3
0.5
VOL
1. Output power is power coupled into a 9/125 mm single mode fiber.
2. 20% to 80%, unfiltered.
Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Wavelength of Operation
Sensitivity for SMPTE 292M
1.485 Gb/s
1260
0
---
---
1620
-18
-20
-21
---
nm
dBm
dBm
dBm
dBm
dB
Pathological
Sen
0
PRBS 223-1, BER=1E-12
Transition: low to high
Transition: high to low
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Optical Return Loss
Pa
Pd
---
-31
1
---
---
6
-27
dB
Electrical
CML Output (Differential)
550
660
850
270
800
1.5
mVp-p
ps
AC coupled output
3, SMPTE 292M
3, SMPTE 344M
3, SMPTE 259M
Optical Rise Time / Fall Time
tr / tf
ps
ns
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0
3
Optoway
SPS-7110VG
***********************************************************************************************************************************************************************
Output LOS Voltage -- Low
Output LOS Voltage -- High
SCL, SDA
VOL
VOH
VOH
VOL
0
0.5
V
V
V
V
IOL=-1.6mA, 1 TTL unit load
2.5
2.5
0
Vcc+0.3
Vcc+0.3
0.5
IOH=40mA, 1 TTL unit load
3. 20% to 80%, unfiltered.
MODULE DEFINITION
Module Definition
PIN 5
PIN 6
Interpretation by Host
4
SCL
SDA
Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector
(NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM
protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0
4
Optoway
SPS-7110VG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
Signal Name
TX GND
Description
Transmitter Ground
Transmitter Fault Indication
PIN
11 RX GND
12 RX DATA OUT- Inverse Receiver Data Out
Signal Name
Description
Receiver Ground
2
TX Fault
3
TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
on high or open)
4
5
6
MOD-DFE2
MOD-DEF1
MOD-DEF0
Modulation Definition 2 – Two wires 14 RX GND
serial ID Interface
Receiver Ground
Modulation Definition 1 – Two wires 15 Vcc RX
serial ID Interface
Receiver Power – 3.3V±5%
Transmitter Power – 3.3V±5%
Modulation Definition 0 – Ground in 16 Vcc TX
Module
7
8
9
N/C
Not Connected
Loss of Signal
17 TX GND
Transmitter Ground
Transmitter Data In
LOS
18 TX DATA IN+
19 TX DATA IN-
20 TX GND
RX GND
Receiver Ground
Receiver Ground
Inverse Transmitter Data In
Transmitter Ground
10 RX GND
MODULE DEFINITION
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
MOD-DEF0
Interpretation by Host
PIN 5
PIN 6
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0
5
Optoway
SPS-7110VG
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
VeeT
3
Tx_DISABLE
Tx_FAULT
Tx_DISABLE
Tx_FAULT
2
4.7K to 10KΩ
TD +
TD -
18
19
16
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Re-Clocker
Driver
TD +
1μH
Vcc 3.3V
10μF
VccT
100nF
10μF
100nF
100nF
1μH
Protocol
IC
15
12
VccR
RD -
10μF
RD +
RD -
Z=50Ω
Re-Clocker
POST
Amp
RD + 13
Z=50Ω
4.7K to 10KΩ
LOS
8
LOSS OF SINGAL
(9,10,11,14)
6
VeeR
MODULE DETECT
MOD_DEF(0)
5
4
MOD_DEF(1)
MOD_DEF(2)
SCL
SDA
EEPROM
4.7K to 10KΩ
Vcc 3.3V
4.7K to 10KΩ
SFP module
4.7K to 10KΩ
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0
6
Optoway
SPS-7110VG
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
Subject
Release Date
1.0
Initial datasheet
2008/10/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0
相关型号：
UL1042
UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowegoWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV201
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14
IC-SM-VIDEO AMPWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TA
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TC
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV302N16
IC-SM-4:1 MUX SWITCHWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV4089
VIDEO AMPLIFIER WITH DC RESTORATIONWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
©2020 ICPDF网 联系我们和版权申明