SPS-73160WG [OPTOWAY]
3.3V / 1550 nm / 1.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER; 3.3V / 1550海里/ 1.25 Gbps的数字诊断SFP LC单模收发器
| 型号： | SPS-73160WG |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 3.3V / 1550 nm / 1.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER |
| 文件： | 总4页 (文件大小：149K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
SPS-73160WG
***********************************************************************************************************************************************************************
SPS-73160WG
(RoHS Compliant)
3.3V / 1550 nm / 1.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with IEEE 802.3z Gigabit Ethernet
l Compliant with Fiber Channel 1X SM-LC-L FC-PI
l SFF-8472 Digital Diagnostic Function
l 1550 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 37 dB Power Budget at Least
The SPS-73160WG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as Gigabit Ethernet
1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is
with the SFP 20-pin connector to allow hot plug capability.
Digital diagnostic functions are available via an I2C. This
module is designed for single mode fiber and operates at a
nominal wavelength of 1550 nm. A guaranteed minimum
optical link budget of 37 dB is offered which can
correspond to a link distance of over 160 km (assuming
worst case fiber loss of 0.22 dB/km). The transmitter
section uses a multiple quantum well 1550 nm DFB laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs Avalanche photodetector preamplifier
mounted in an optical header and a limiting post-amplifier
IC.
l Distance up to 160 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operation
l Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l XDSL Applications
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
l Metro Edge Switching
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
1000
Distance Wavelength
Package
Temp. TX Power RX Sens.
RoHS
(dBm) Compliant
-36 Yes
BASE
(km)
(nm)
(oC)
(dBm)
SPS-73160WG 1.25/1.063
160
1550 DFB
0 to 70
5 to 1
LC SFP with DMI
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
Symbol
Min
-40
0
Max
85
70
Units
Notes
Air flow 1m/sec
Tstg
Topr
Vcc
oC
oC
V
-0.5
3.6
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Case Temperature
Power Supply Current
Data Rate
Symbol
Vcc
Topr
Min
3.13
0
Typ
3.3
Max
3.47
70
Units / Notes
V
oC / air flow 1m/sec
ICC (TX+RX)
230
1250
280
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
2
Optoway
SPS-73160WG
***********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Electrical
Po
l
Dl
SMSR
ER
tr
1
1520
---
30
9
---
1550
0.2
5
1580
1
dBm
nm
nm
dB
dB
ps
ps
dB/Hz
1
-20 dB Width
---
---
260
260
-120
20 % to 80% Values.
20 % to 80% Values.
tf
RIN
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
IIL
IIH
VIH - VIL
TDIS, L
TDIS, H
TASSERT
TDEASSERT
TFaultL
-350
mA
mA
V
V
V
ms
ms
V
350
2.4
0.5
Vcc
10
1
0.5
0
2.0
Peak-to-Peak
2
2
0
2.0
0.5
Vcc+0.3
3
3
TFaultH
V
1. Output power is power coupled into a 9/125 mm single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
Sens
Pin
Pa
-36
dBm
dBm
dBm
dBm
dB
4
4
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
-10
---
-50
1.0
-36
---
Transition: low to high
Transition: high to low
Pd
---
---
---
1100
1600
nm
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage – High
V
OH – VOL
VOL
VOH
0.6
0
2.0
2.0
0.5
Vcc+0.3
V
V
V
5
5
4. Measured at 27-1 PRBS at BER 1E-12. Receiver sensitivity is better than -36dBm at1.25 Gbps. However, due to the resolution limitation
of Digital Diagnostic Monitoring, the effect readout range for the RX received power at EEPROM A2 is from -10 to -34 dBm.
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
3
Optoway
SPS-73160WG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
Signal Name
TX GND
Description
Transmitter Ground
Transmitter Fault Indication
PIN
11 RX GND
12 RX DATA OUT- Inverse Receiver Data Out
Signal Name
Description
Receiver Ground
2
TX Fault
3
TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
on high or open)
4
5
6
MOD-DFE2
MOD-DEF1
MOD-DEF0
Modulation Definition 2 – Two wires 14 RX GND
serial ID Interface
Receiver Ground
Modulation Definition 1 – Two wires 15 Vcc RX
serial ID Interface
Receiver Power – 3.3V±5%
Transmitter Power – 3.3V±5%
Modulation Definition 0 – Ground in 16 Vcc TX
Module
7
8
9
N/C
Not Connected
Loss of Signal
17 TX GND
Transmitter Ground
Transmitter Data In
LOS
18 TX DATA IN+
19 TX DATA IN-
20 TX GND
RX GND
Receiver Ground
Receiver Ground
Inverse Transmitter Data In
Transmitter Ground
10 RX GND
Module Definition
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
MOD-DEF0
Interpretation by Host
PIN 5
PIN 6
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
4
Optoway
SPS-73160WG
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
VeeT
3
Tx_DISABLE
Tx_FAULT
Tx_DISABLE
Tx_FAULT
2
4.7K to 10KΩ
TD +
TD -
18
19
16
TD +
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Driver
1μH
Vcc 3.3V
VccT
10μF
10nF
10μF
10nF
10nF
1μH
SerDes
IC
Protocol
IC
15
12
13
8
VccR
RD -
10μF
RD -
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD +
RD +
depending on SERDES
4.7K to 10KΩ
LOS
LOSS OF SINGAL
(9,10,11,14)
6
VeeR
MODULE DETECT
MOD_DEF(0)
MOD_DEF(1)
MOD_DEF(2)
5
4
SCL
SDA
EEPROM
4.7K to 10KΩ
4.7K to 10KΩ
SFP module
Vcc 3.3V
4.7K to 10KΩ
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
相关型号：
SPS-73180W-CXX0G_08
3.3V / CWDM/ 1.25 Gbps Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER
OPTOWAY
©2020 ICPDF网 联系我们和版权申明