SPS-7350G_15

更新时间:2024-09-18 22:17:50
品牌:OPTOWAY
描述:1.25 Gbps LC SFP SINGLE-MODE TRANSCEIVER

SPS-7350G_15 概述

1.25 Gbps LC SFP SINGLE-MODE TRANSCEIVER

SPS-7350G_15 数据手册

通过下载SPS-7350G_15数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
1
Optoway  
SPS-7350G  
***********************************************************************************************************************************************************************  
SPS-7350G / SPS-7350BG / SPS-7350AG  
(RoHS Compliant)  
3.3V / 1550 nm / 1.25 Gbps LC SFP SINGLE-MODE TRANSCEIVER  
**********************************************************************************************************************************************************************  
FEATURES  
DESCRIPTION  
l Hot-Pluggable SFP Footprint LC Optical Transceiver  
l Small Form-Factor Pluggable (SFP) MSA compatible  
l Compliant with IEEE 802.3z 1000BASE-XD  
l Compliant with Fibre Channel 1x SM-LC-L FC-PI  
l AC/AC Coupling according to MSA  
l 1550 nm DFB LD Transmitter  
The SPS-7350G series single mode transceivers is small  
form factor pluggable module for bi-directional serial  
optical data communications such as Gigabit Ethernet  
1000BASE-XD and Fibre Channel 1x SM-LC-L FC-PI. It  
is with the SFP 20-pin connector to allow hot plug  
capability. This module is designed for single mode fiber  
and operates at a nominal wavelength of 1550 nm. The  
transmitter section uses a multiple quantum well laser  
and is a class 1 laser compliant according to International  
Safety Standard IEC-60825. The receiver section uses an  
integrated InGaAs detector preamplifier (IDP) mounted in  
an optical header and a limiting post-amplifier IC.  
l Distance up to 50 km  
l Single +3.3 V Power Supply  
l RoHS Compliant  
l 0 to 70oC Operation: SPS-7350G  
l -10 to 85oC Operation: SPS-7350BG  
l -40 to 85oC Operation: SPS-7350AG  
l Class 1 Laser International Safety Standard IEC-60825  
Compliant  
LASER SAFETY  
This single mode transceiver is a Class 1 laser product. It  
complies with IEC-60825 and FDA 21 CFR 1040.10 and  
1040.11. The transceiver must be operated within the  
specified temperature and voltage limits. The optical ports  
of the module shall be terminated with an optical connector  
or with a dust plug.  
APPLICATIONS  
l Gigabit Ethernet Switches and Routers  
l Fibre Channel Switch Infrastructure  
l XDSL Applications  
l Metro Edge Switching  
ORDER INFORMATION  
P/No.  
Bit Rate  
(Gb/s)  
1000  
BASE  
Distance Wavelength Package  
Temp. TX Power RX Sens.  
RoHS  
(km)  
(nm)  
(oC)  
(dBm)  
0 to -5  
0 to -5  
0 to -5  
(dBm) Compliant  
SPS-7350G  
1.25  
1.25  
1.25  
XD  
XD  
XD  
50  
1550 DFB  
1550 DFB  
1550 DFB  
LC SFP  
0 to 70  
-24  
-24  
-24  
Yes  
Yes  
Yes  
SPS-7350BG  
SPS-7350AG  
50  
LC SFP -10 to 85  
LC SFP -40 to 85  
50  
Absolute Maximum Ratings  
Parameter  
Storage Temperature  
Symbol  
Tstg  
Topr  
Min  
-40  
0
Max  
85  
70  
Units  
Notes  
oC  
oC  
Operating Case Temperature  
SPS-7350G  
-10  
-40  
-0.5  
85  
85  
3.6  
SPS-7350BG  
SPS-7350AG  
Power Supply Voltage  
Vcc  
V
Recommended Operating Conditions  
Parameter  
Power Supply Voltage  
Operating Case Temperature  
Symbol  
Vcc  
Topr  
Min  
3.1  
0
-10  
-40  
Typ  
3.3  
Max  
3.5  
70  
85  
85  
Units / Notes  
V
oC / SPS-7350G  
oC / SPS-7350BG  
oC / SPS-7350AG  
mA  
Power Supply Current  
Data Rate  
ICC (TX+RX)  
200  
1250  
300  
100  
Mb/s  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
1/1/2008 V2.0  
2
Optoway  
SPS-7350G  
***********************************************************************************************************************************************************************  
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Optical Transmit Power  
Output Center Wavelength  
Output Spectrum Width  
Side Mode Suppression Ratio  
Extinction Ratio  
Optical Rise Time  
Optical Fall Time  
Relative Intensity Noise  
Electrical  
Po  
l
Dl  
SMSR  
ER  
tr  
-5  
1480  
---  
30  
9
---  
0
1580  
1
dBm  
nm  
nm  
dB  
dB  
ps  
ps  
dB/Hz  
1
---  
-20 dB width  
---  
---  
260  
260  
-120  
20 % to 80% Values  
20 % to 80% Values  
tf  
RIN  
Data Input Current Low  
Data Input Current High  
Differential Input Voltage  
TX Disable Input Voltage Low  
TX Disable Input Voltage High  
TX Disable Assert Time  
TX Disable Deassert Time  
TX Fault Output Voltage -- Low  
TX Fault Output Voltage -- High  
IIL  
IIH  
VIH - VIL  
TDIS, L  
TDIS, H  
TASSERT  
TDEASSERT  
TFaultL  
-350  
mA  
mA  
V
V
V
ms  
ms  
V
350  
2.4  
0.5  
Vcc  
10  
1
0.5  
0
2.0  
Peak-to-Peak  
2
2
0
2.0  
0.5  
Vcc+0.3  
3
3
TFaultH  
V
1. Output power is power coupled into a 9/125 mm single mode fiber.  
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.  
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).  
Receiver Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Sensitivity  
Sens  
Pin  
Pa  
-24  
dBm  
dBm  
dBm  
dBm  
dB  
4
4
Maximum Input Power  
Signal Detect -- Asserted  
Signal Detect -- Deasserted  
Signal detect -- Hysteresis  
Wavelength of Operation  
Electrical  
-3  
---  
-36  
1.0  
-24  
---  
Transition: low to high  
Transition: high to low  
Pd  
---  
---  
---  
1100  
1600  
nm  
Differential Output Voltage  
Output LOS Voltage -- Low  
Output LOS Voltage High  
V
OH VOL  
VOL  
VOH  
0.6  
0
2.0  
2.0  
0.5  
Vcc+0.3  
V
V
V
5
5
4. Measured at 27-1 PRBS at BER 1E-12 @ 1550 nm.  
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V2.0  
3
Optoway  
SPS-7350G  
***********************************************************************************************************************************************************************  
CONNECTION DIAGRAM  
PIN  
1
Signal Name  
TX GND  
Description  
Transmitter Ground  
Transmitter Fault Indication  
PIN  
11 RX GND  
12 RX DATA OUT- Inverse Receiver Data Out  
Signal Name  
Description  
Receiver Ground  
2
TX Fault  
3
TX Disable  
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out  
on high or open)  
4
5
6
MOD-DFE2  
MOD-DEF1  
MOD-DEF0  
Modulation Definition 2 Two wires 14 RX GND  
serial ID Interface  
Receiver Ground  
Modulation Definition 1 Two wires 15 Vcc RX  
serial ID Interface  
Receiver Power 3.3V±5%  
Transmitter Power 3.3V±5%  
Modulation Definition 0 Ground in 16 Vcc TX  
Module  
7
8
9
N/C  
Not Connected  
Loss of Signal  
17 TX GND  
Transmitter Ground  
Transmitter Data In  
LOS  
18 TX DATA IN+  
19 TX DATA IN-  
20 TX GND  
RX GND  
Receiver Ground  
Receiver Ground  
Inverse Transmitter Data In  
Transmitter Ground  
10 RX GND  
Module Definition  
Module Definition  
MOD-DEF2  
PIN 4  
MOD-DEF1  
MOD-DEF0  
Interpretation by Host  
PIN 5  
PIN 6  
4
SDA  
SCL  
LV-TTL Low  
Serial module definition  
protocol  
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector  
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the  
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V2.0  
4
Optoway  
SPS-7350G  
***********************************************************************************************************************************************************************  
RECOMMENDED CIRCUIT SCHEMATIC  
(1,17,20)  
VeeT  
3
Tx_DISABLE  
Tx_FAULT  
Tx_DISABLE  
Tx_FAULT  
2
4.7K to 10KΩ  
TD +  
TD -  
18  
19  
16  
TD +  
TD -  
LD  
Z=50Ω  
Z=50Ω  
100Ω  
Driver  
1μH  
Vcc 3.3V  
VccT  
10μF  
10nF  
10μF  
10nF  
10nF  
1μH  
SerDes  
IC  
Protocol  
IC  
15  
12  
13  
8
VccR  
RD -  
10μF  
RD -  
Z=50Ω  
Z=50Ω  
100Ω  
POST  
Amp  
RD +  
RD +  
depending on SERDES  
4.7K to 10KΩ  
LOS  
LOSS OF SINGAL  
(9,10,11,14)  
6
VeeR  
MODULE DETECT  
MOD_DEF(0)  
MOD_DEF(1)  
MOD_DEF(2)  
5
4
SCL  
SDA  
EEPROM  
4.7K to 10KΩ  
4.7K to 10KΩ  
SFP module  
Vcc 3.3V  
4.7K to 10KΩ  
PACKAGE DIAGRAM  
Units in mm  
Note: Specifications subject to change without notice.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V2.0  
5
Optoway  
SPS-7350G  
***********************************************************************************************************************************************************************  
Revision History  
Version  
Subject  
Release Date  
1.0  
2.0  
Initial datasheet  
Revise package diagram for high port density use  
2005/12/1  
2008/1/1  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V2.0  

SPS-7350G_15 相关器件

型号 制造商 描述 价格 文档
SPS-7350G_2015 OPTOWAY 1.25 Gbps LC SFP SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W OPTOWAY 1.25 Gbps Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W-CXX0G OPTOWAY 3.3V / CWDM / 1.25 Gbps Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W-CXX0G_08 OPTOWAY 3.3V / CWDM/ 1.25 Gbps Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W-D20G OPTOWAY Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W-D21G OPTOWAY Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W-D22G OPTOWAY Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W-D23G OPTOWAY Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W-D24G OPTOWAY Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER 获取价格
SPS-7350W-D25G OPTOWAY Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER 获取价格

SPS-7350G_15 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6