SPS-9120RG_2015 [OPTOWAY]
3.2Gb/s SFP LC SINGLE-MODE TRANSCEIVER;
| 型号： | SPS-9120RG_2015 |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 3.2Gb/s SFP LC SINGLE-MODE TRANSCEIVER |
| 文件： | 总5页 (文件大小：153K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
SPS-9105RG
***********************************************************************************************************************************************************************
SPS-9105RG / SPS-9105BRG / SPS-9105ARG
(RoHS Compliant)
3.3V / 1310 nm / 3.2Gb/s SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Multirate up to 3.2 Gbps
The SPS-9105RG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as 10GBASE LX-4,
Serial ATA/ATA2, SONET OC-48 / SDH STM-16,
Gigabit Ethernet 1000BASE-LX and 1x/2x Fibre Channel.
It is with the SFP 20-pin connector to allow hot plug
capability. This module is designed for single mode fiber
and operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operation: SPS-9105RG
l -10 to 85oC Operation: SPS-9105BRG
l -40 to 85oC Operation: SPS-9105ARG
l Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
l 10GBASE LX-4
l Serial ATA / ATA2
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
Distance Wavelength
Package
Temp. TX Power RX Sens.
RoHS
/SDH
(km)
(nm)
1310
1310
1310
(oC)
(dBm)
-3 to -8
-3 to -8
-3 to -8
(dBm) Compliant
SPS-9105RG
SPS-9105BRG
SPS-9105ARG
Multirate*
Multirate*
Multirate*
5
5
5
LC SFP
LC SFP
LC SFP
0 to 70
-18
-18
-18
Yes
Yes
Yes
-10 to 85
-40 to 85
Multirate*: 3.185Gb/s, 3.125Gb/s, 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Symbol
Tstg
Topr
Min
-40
0
Max
85
70
Units
oC
Notes
SPS-9105RG
oC
-10
-40
-0.5
85
85
3.6
SPS-9105BRG
SPS-9105ARG
Power Supply Voltage
Vcc
V
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Case Temperature
Symbol
Min
Typ
Max
Units / Notes
Vcc
Topr
3.1
0
-10
-40
3.3
3.5
70
85
85
300
3200
V
oC / SPS-9105RG
oC / SPS-9105BRG
oC / SPS-9105ARG
mA
Power Supply Current
Data Rate
ICC (TX+RX)
200
3.125
125
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2009 V2.0
2
Optoway
SPS-9105RG
***********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Po
l
Dl
ER
-8
1270
---
---
1310
---
-3
1350
2.5
dBm
nm
nm
1
RMS (σ)
6.0
---
---
dB
Output Eye
Compliant with IEEE 802.3-2008 10GBASE-LX4
Optical Rise Time
Optical Fall Time
tr
tf
120
120
ps
ps
20 % to 80% Values
20 % to 80% Values
Relative Intensity Noise
Electrical
RIN
-120
dB/Hz
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
TX Disable Negate Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
IIL
IIH
-350
mA
mA
V
V
V
ms
ms
V
350
2.4
0.5
Vcc
10
1
VIH - VIL
TDIS, L
TDIS, H
T_off
0.5
0
2.0
Peak-to-Peak
2
2
T_on
TFaultL
TFaultH
0
2.0
0.5
Vcc+0.3
3
3
V
1. Output power is power coupled into a 9/125 mm single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity @ 3.125Gb/s
Sensitivity @ OC-48
Sens1
Sens1
Sens2
Sens3
Pa
-3
-3
-3
-3
---
-33
1.0
1100
-18
-18
-19
-20
-20
---
dBm
dBm
dBm
dBm
dBm
dBm
dB
4
5
4
4
Sensitivity @2X Fibre Channal
Sensitivity @Gigabit Ethernet
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Transition: low to high
Transition: high to low
Pd
---
---
---
1600
nm
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage -- High
LOS Assert Time
V
OH – VOL
VOL
0.6
0
2.0
2.0
0.5
Vcc+0.3
100
V
V
V
ms
ms
6
6
VOH
T_loss on
_
_
LOS Deassert Time
T_loss off
100
4. Measured at 27-1 PRBS at BER 1E-12 @1300nm.
5. Measured at 223-1 PRBS at BER 1E-10 @ 1300 nm.
6. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2009 V2.0
3
Optoway
SPS-9105RG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
Signal Name
TX GND
Description
Transmitter Ground
Transmitter Fault Indication
PIN
11 RX GND
12 RX DATA OUT- Inverse Receiver Data Out
Signal Name
Description
Receiver Ground
2
TX Fault
3
TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
on high or open)
4
5
6
MOD-DFE2
MOD-DEF1
MOD-DEF0
Modulation Definition 2 – Two wires 14 RX GND
serial ID Interface
Receiver Ground
Modulation Definition 1 – Two wires 15 Vcc RX
serial ID Interface
Receiver Power – 3.3V±5%
Transmitter Power – 3.3V±5%
Modulation Definition 0 – Ground in 16 Vcc TX
Module
7
8
9
N/C
Not Connected
Loss of Signal
17 TX GND
Transmitter Ground
Transmitter Data In
LOS
18 TX DATA IN+
19 TX DATA IN-
20 TX GND
RX GND
Receiver Ground
Receiver Ground
Inverse Transmitter Data In
Transmitter Ground
10 RX GND
MODULE DEFINITION
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
MOD-DEF0
Interpretation by Host
PIN 5
PIN 6
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2009 V2.0
4
Optoway
SPS-9105RG
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
VeeT
3
Tx_DISABLE
Tx_FAULT
Tx_DISABLE
Tx_FAULT
2
4.7K to 10KΩ
TD +
TD -
18
19
16
TD +
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Driver
1μH
Vcc 3.3V
VccT
10μF
10nF
10μF
10nF
10nF
1μH
SerDes
IC
Protocol
IC
15
12
13
8
VccR
RD -
10μF
RD -
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD +
RD +
depending on SERDES
4.7K to 10KΩ
LOS
LOSS OF SINGAL
(9,10,11,14)
6
VeeR
MODULE DETECT
MOD_DEF(0)
MOD_DEF(1)
MOD_DEF(2)
5
4
SCL
SDA
EEPROM
4.7K to 10KΩ
4.7K to 10KΩ
SFP module
Vcc 3.3V
4.7K to 10KΩ
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2009 V2.0
5
Optoway
SPS-9105RG
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
Subject
Release Date
1.0
2.0
Initial datasheet
Update transmitter eye mask definition and rise/fall time
2008/1/1
2009/1/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2009 V2.0
相关型号：
©2020 ICPDF网 联系我们和版权申明