SPS-9340MG [OPTOWAY]
3.3V / 1550 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVER; 3.3V / 1550海里/多速率SFP LC单模收发器
| 型号： | SPS-9340MG |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 3.3V / 1550 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVER |
| 文件： | 总4页 (文件大小：150K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
SPS-93120MG
***********************************************************************************************************************************************************************
SPS-93120MG (RoHS Compliant)
3.3V / 1550 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with SONET OC-48 (LR-2) / SDH STM-16
(L-16.2)
The SPS-93120MG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-48 / SDH
STM-16, Gigabit Ethernet 1000BASE-LX and Fibre
Channel 1x/2x SM-LC-L FC-PI. It is with the SFP 20-pin
connector to allow hot plug capability. This module is
designed for single mode fiber and operates at a nominal
wavelength of 1550 nm. A guaranteed minimum optical
link budget of 31 dB is offered which can correspond to a
link distance of over 120 km (assuming worst case fiber loss
of 0.22 dB/km). The transmitter section uses a multiple
quantum well 1550 nm DFB laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
l Compliant with Fibre Channel 1x/2x SM-LC-L FC-PI
l Compliant with IEEE 802.3z 1000BASE-ZX
l 1550 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 31 dB Power Budget at Least
l Distance up to 120 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operation
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
Distance Wavelength Package
Temp. TX Power RX Sens.
RoHS
(dBm) Compliant
-30 Yes
(km)
(nm)
(oC)
(dBm)
SPS-93120MG
Multirate*
120
1550 DFB
LC SFP
0 to 70
5 to 1
Multirate*: 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
Symbol
Tstg
Topr
Min
-40
0
Max
85
70
Units
Notes
Air flow 1m/sec
oC
oC
V
Vcc
-0.5
3.6
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Case Temperature
Power Supply Current
Data Rate
Symbol
Vcc
Topr
Min
3.13
0
Typ
3.3
Max
3.47
70
300
2670
Units / Notes
V
oC / air flow 1m/sec
ICC (TX+RX)
230
2488
mA
Mb/s
125
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
2
Optoway
SPS-93120MG
***********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Po
l
Dl
SMSR
ER
1
1500
---
30
8.2
---
5
1570
1
dBm
nm
nm
dB
1
---
-20 dB Width
---
---
dB
Output Eye
Compliant with Telecordia GR-253-GORE and ITU-T Recommendation G.957
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Dispersion Penalty
tr
tf
RIN
150
150
-120
2.5
ps
ps
dB/Hz
dB
20 % to 80% Values
20 % to 80% Values
2
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
IIL
IIH
VIH - VIL
TDIS, L
TDIS, H
TASSERT
TDEASSERT
TFaultL
-350
mA
mA
V
V
V
ms
ms
V
350
2.4
0.5
Vcc
10
1
0.5
0
2.0
Peak-to-Peak
3
2
0
2.0
0.5
Vcc+0.3
4
4
TFaultH
V
1. Output power is power coupled into a 9/125 mm single mode fiber.
2. Specified at 2400 ps/nm dispersion over G.652/G.654 fiber with center wavelength range of 1500 to 1580 nm.
3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity @ OC-48
Sens1
Sens2
Sens3
Sens4
Sens5
Pa
-9
-9
-9
-9
-18
---
-40
1.0
1100
-30
-30
-30
-30
-30
-28
---
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dB
5
6
6
5
Sensitivity @2X Fibre Channal
Sensitivity @Gigabit Ethernet
Sensitivity @OC-12
Sensitivity @OC-3
5
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Transition: low to high
Transition: high to low
Pd
---
---
---
1600
nm
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage -- High
V
OH – VOL
VOL
VOH
0.6
0
2.0
2.0
0.5
Vcc+0.3
V
V
V
7
7
5. Measured at 223-1 PRBS at BER 1E-10.
6. Measured at 27-1 PRBS at BER 1E-12 .
7. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
3
Optoway
SPS-93120MG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
Signal Name
TX GND
Description
Transmitter Ground
Transmitter Fault Indication
PIN
11 RX GND
12 RX DATA OUT- Inverse Receiver Data Out
Signal Name
Description
Receiver Ground
2
TX Fault
3
TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
on high or open)
4
5
6
MOD-DFE2
MOD-DEF1
MOD-DEF0
Modulation Definition 2 – Two wires 14 RX GND
serial ID Interface
Receiver Ground
Modulation Definition 1 – Two wires 15 Vcc RX
serial ID Interface
Receiver Power – 3.3V±5%
Transmitter Power – 3.3V±5%
Modulation Definition 0 – Ground in 16 Vcc TX
Module
7
8
9
N/C
Not Connected
Loss of Signal
17 TX GND
Transmitter Ground
Transmitter Data In
LOS
18 TX DATA IN+
19 TX DATA IN-
20 TX GND
RX GND
Receiver Ground
Receiver Ground
Inverse Transmitter Data In
Transmitter Ground
10 RX GND
Module Definition
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
MOD-DEF0
Interpretation by Host
PIN 5
PIN 6
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
4
Optoway
SPS-93120MG
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
VeeT
3
Tx_DISABLE
Tx_FAULT
Tx_DISABLE
Tx_FAULT
2
4.7K to 10KΩ
TD +
TD -
18
19
16
TD +
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Driver
1μH
Vcc 3.3V
VccT
10μF
10nF
10μF
10nF
10nF
1μH
SerDes
IC
Protocol
IC
15
12
13
8
VccR
RD -
10μF
RD -
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD +
RD +
depending on SERDES
4.7K to 10KΩ
LOS
LOSS OF SINGAL
(9,10,11,14)
6
VeeR
MODULE DETECT
MOD_DEF(0)
MOD_DEF(1)
MOD_DEF(2)
5
4
SCL
SDA
EEPROM
4.7K to 10KΩ
4.7K to 10KΩ
SFP module
Vcc 3.3V
4.7K to 10KΩ
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0
相关型号：
SPS-9340MG_08
3.3V / 1550 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MG_15
Multirate SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MG_2015
Multirate SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MW-CXX0G
3.3V / CWDM / Mutlirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MW-CXX0G_08
3.3V / CWDM/ Mutlirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MW-CXX0G_15
Mutlirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MW-CXX0G_2015
Mutlirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MWG
3.3V / 1550 nm / Multirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MWG_08
3.3V / 1550 nm /Multirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MWG_15
Multirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340MWG_2015
Multirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPS-9340R-CXX0G
3.3V / CWDM/ 3.2Gb/s SFP LC SINGLE-MODE TRANSCEIVERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
©2020 ICPDF网 联系我们和版权申明