TRS-7010FG [OPTOWAY]
Transceiver,;型号: | TRS-7010FG |
厂家: | OPTOWAY TECHNOLOGY INC |
描述: | Transceiver, 光纤 |
文件: | 总5页 (文件大小:101K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1
Optoway
TRS-7010G
**********************************************************************************************************************************************************************
TRS-7010G / TRS-7010TG / TRS-7010FG / TRS-7010CG / TRS-7010CTG / TRS-7010CFG
5V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-7010G
l Duplex ST Single Mode Transceiver: TRS-7010TG
l Duplex FC Single Mode Transceiver: TRS-7010FG
l Compliant with IEEE-802.3z Gigabit Ethernet
l Industry Standard 1 x 9 Footprint
l 0 to 70oC Operating : TRS-7010G
l -40 to 85oC Operating : TRS-7010AG
l Single +5 V Power Supply
The TRS-7010G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such Gigabit Ethernet and
Fibre Channel. This module is designed for single mode
fiber and operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC 60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
l RoHS Compliant
l PECL Signal Detect Output: TRS-7010G
l TTL Signal Detect Output: TRS-7010CG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
ORDER INFORMATION
P/No.
Bit Rate 1000 Distance Wavelength Voltage
Package
Temp.
(oC)
TX
RX Sens.
(dBm) Compliant
RoHS
(Mb/s) BASE
(km)
(nm)
(V)
Power
(dBm)
-3 to -9
TRS-7010G
TRS-7010AG
1250 LX / LH
1250 LX / LH
10
10
1310
1310
5
5
1X9 SC/ST/FC 0 to 70
1X9 SC/ST/FC -40 to 85 -3 to -9
-21
-21
Y
Y
Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXXTG for ST duplex transceiver, TRS-XXXXX-EMG for SC duplex
transceiver with extended EMI shielding, TRS-XXXXXCXG for transceiver with TTL signal detection output.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Min
-40
0
Max
85
Units
oC
oC
Notes
TRS-7010G
Topr
70
-40
85
TRS-7010AG
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
6
oC
V
10 seconds on leads only
0
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Min
4.75
0
Typ
Max
5.25
70
85
1300
240
Units
Vcc
5
V
oC / TRS-7010G
oC / TRS-7010AG
Mb/s
Topr
-40
Data Rate
1250
180
Power Supply Current
Icc
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V4.0
2
Optoway
TRS-7010G
***********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 4.75V < Vcc < 5.25V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Po
l
-9
1270
---
---
1310
---
-3
1355
2.5
dBm
nm
nm
dB
1
RMS (σ)
Dl
ER
9
---
---
Output Eye
Compliant with IEEE 802.3z
Optical Rise Time
Optical Fall Time
tr
tf
0.26
0.26
ns
ns
20% to 80% Values
20% to 80% Values
Relative Intensity Noise
Total Jitter
RIN
TJ
-120
0.227
dB/Hz
ns
2
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
IIL
IIH
-350
mA
mA
mV
V
350
VIH - VIL
VIL - VCC
VIH - VCC
300
-2.0
-1.1
-1.58
-0.74
3
3
V
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. Measured with a 27-1 PRBS.
3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
Maximum Input Power
---
Pin
Pa
---
-3
---
-21
---
dBm
dBm
dBm
dBm
dB
1
Signal Detect -- Asserted
---
---
---
---
---
-21
---
Transition: low to high
Transition: high to low
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Pd
-31
1.0
1100
1600
nm
Electrical
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
VOL - VCC
VOH - VCC
VOL - VCC
VOH - VCC
VSDL
-2.0
-1.1
-2.0
-1.1
-1.58
-0.74
-1.58
-0.74
0.5
V
V
V
V
V
V
2
2
TRS-7010G
TRS-7010CG
VSDH
2.0
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V4.0
3
Optoway
TRS-7010G
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
Receiver Signal Ground 1 (Rx GND)
Receiver Data Out 2 (RD+)
Receiver Data Out Bar 3 (RD- )
Signal Detect 4 (SD)
N/C
N/C
Receiver Power Supply 5 (Rx Vcc)
Transmitter Power Supply 6 (Tx Vcc)
Transmitter Data In Bar 7 (TD- )
Transmitter Data In 8 (TD+)
TOP VIEW
Transmitter Signal Ground 9 (Tx GND)
PIN
1
2
Symbol
Notes
Rx GND
RD+
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
3
RD-
See recommended circuit schematic
4
5
SD
Active high on this indicates a received optical signal
+5V dc power for the receiver section
+5V dc power for the transmitter section
See recommended circuit schematic
Rx Vcc
Tx Vcc
TD-
6
7
8
TD+
See recommended circuit schematic
9
Tx GND
Directly connect this plan to the trransmitter ground plane
RECOMMENDED CIRCUIT SCHEMATIC
Transceiver
SerDes IC
VCC 5V
9
TX GND
0.1uF
TD+
TD-
8
TD+
TD-
LD
Z=50R
PECL
100R
0.1uF
Driver
7
Z=50R
1uH
6
VCC 5V
TX VCC
RX VCC
VCC 5V
10uF
10uF
10nF
10nF
1uH
R1
R2
5
SD Level
VCC 5V
R3
VCC 5V
PECL
SD
RD-
4
3
2
R5
RD-
POST
Amp
Z=50R
Z=50R
RD+
RD+
R4
R6
1
RX GND
CDR or PHY DEVICE
For TTL SD Level R1=R2=N.C. ,R3=R5=82R ,R4=R6=130R
For PECL SD Level R1=R3=R5=82R ,R2=R4=R6=130R
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power
supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx
Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V4.0
4
Optoway
TRS-7010G
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) SC Type With Extended Shielding
TX OPTICAL
RX OPTICAL
TRS-7010-EMG / TRS-7010C-EMG / TRS-7010A-EMG / TRS-7010AC-EMG
2) ST Type
TX OPTICAL
RX OPTICAL
TRS-7010TG / TRS-7010CTG / TRS-7010ATG / TRS-7010ACTG
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V4.0
5
Optoway
TRS-7010G
***********************************************************************************************************************************************************************
3) FC Type
12.7
TX OPTICAL
2.54*8
RX OPTICAL
20.32
25.4
O1.3
10.18
20.32
34.5MAX
TRS-7010FG / TRS-7010CFG / TRS-7010AFG / TRS-7010ACFG
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V4.0
相关型号:
©2020 ICPDF网 联系我们和版权申明