TRS-7380-CXX0G [OPTOWAY]

CWDM 3.3V / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver; CWDM 3.3V / 1.25 Gbps的符合RoHS光学单模收发器
TRS-7380-CXX0G
型号: TRS-7380-CXX0G
厂家: OPTOWAY TECHNOLOGY INC    OPTOWAY TECHNOLOGY INC
描述:

CWDM 3.3V / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
CWDM 3.3V / 1.25 Gbps的符合RoHS光学单模收发器

文件: 总5页 (文件大小:108K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
1
Optoway  
TRS-7380-CXX0G  
***********************************************************************************************************************************************************************  
TRS-7380-CXX0G / TRS-7380T-CXX0G / TRS-7380F-CXX0G  
CWDM 3.3V / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver  
**********************************************************************************************************************************************************************  
FEATURES  
DESCRIPTION  
l Duplex SC SM Transceiver: TRS-7380-CXX0G  
l Duplex ST SM Transceiver: TRS-7380T-CXX0G  
l Duplex FC SM Transceiver: TRS-7380F-CXX0G  
l Compliant with IEEE-802.3z Gigabit Ethernet  
l 18-Wavelength CWDM DFB LD Transmitter from  
1270 nm to 1610 nm, with step 20 nm  
l 24 dB Link Budget at Least  
The TRS-7380-CXX0G series single mode transceivers is  
low power, high performance CWDM modules for  
bi-directional serial optical data communications such as  
Gigabit Ethernet and Fibre Channel. There are eighteen  
center wavelengths available from 1270 nm to 1610 nm,  
each step 20 nm. A guaranteed minimum optical link  
budget of 24 dB is offered. The transmitter section uses a  
multiple quantum well DFB laser and is a class 1 laser  
compliant according to International Safety Standard IEC  
60825. The receiver section uses an integrated InGaAs  
detector preamplifier (IDP) mounted in an optical header  
and a limiting post-amplifier IC. A PECL logic interface  
simplifies interface to external circuitry.  
l Industry Standard 1 x 9 Footprint  
l Single +3.3 V Power Supply  
l RoHS Compliant  
l LVPECL Signal Detect Output: TRS-7380-CXX0G  
l LVTTL Signal Detect Output: TRS-7380C-CXX0G  
l Wave Solderable and Aqueous Washable  
l Class 1 Laser International Safety Standard IEC 60825  
Compliant  
LASER SAFETY  
This single mode transceiver is a Class 1 laser product. It  
complies with IEC 60825 and FDA 21 CFR 1040.10 and  
1040.11. The transceiver must be operated within the  
specified temperature and voltage limits. The optical ports  
of the module shall be terminated with an optical connector  
or with a dust plug.  
APPLICATIONS  
l Gigabit Ethernet Links  
l SONET/SDH Equipment Interconnect  
l Fibre Channel Links  
l CWDM  
ORDER INFORMATION  
P/No.  
Bit Rate 1000  
Power Wavelength Voltage  
Package  
Temp.  
(oC)  
TX  
RX Sens.  
(dBm) Compliant  
RoHS  
(Mb/s) BASE Budget  
(dB)  
(nm)  
(V)  
Power  
(dBm)  
5 to 0  
TRS-7380-CXX0G  
1250  
ZX  
> 24  
CWDM*  
3.3  
1X9 SC/ST/FC 0 to 70  
-24  
Y
CWDM Wavelength (0 to 70oC)  
Central  
Wavelength  
-C270  
Min.  
(nm)  
Typ.  
Max.  
(nm)  
Central  
Wavelength  
Min.  
(nm)  
Typ.  
Max.  
(nm)  
(nm)  
1270  
1290  
1310  
1330  
1350  
1370  
1390  
1410  
1430  
(nm)  
1450  
1470  
1490  
1510  
1530  
1550  
1570  
1590  
1610  
1264.5  
1284.5  
1304.5  
1324.5  
1344.5  
1364.5  
1384.5  
1404.5  
1424.5  
1277.5  
1297.5  
1317.5  
1337.5  
1357.5  
1377.5  
1397.5  
1417.5  
1437.5  
-C450  
-C470  
-C490  
-C510  
-C530  
-C550  
-C570  
-C590  
-C610  
1444.5  
1464.5  
1484.5  
1504.5  
1524.5  
1544.5  
1564.5  
1584.5  
1604.5  
1457.5  
1477.5  
1497.5  
1517.5  
1537.5  
1557.5  
1577.5  
1597.5  
1617.5  
-C290  
-C310  
-C330  
-C350  
-C370  
-C390  
-C410  
-C430  
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V3.0  
2
Optoway  
TRS-7380-CXX0G  
***********************************************************************************************************************************************************************  
Absolute Maximum Ratings  
Parameter  
Storage Temperature  
Operating Temperature  
Soldering Temperature  
Power Supply Voltage  
Input Voltage  
Symbol  
Tstg  
Topr  
---  
Min  
-40  
0
Max  
85  
Units  
oC  
Notes  
70  
260  
4.5  
oC  
With air flow 1m/sec  
10 seconds on leads only  
oC  
Vcc  
---  
0
V
V
GND  
Vcc  
Output Current  
Iout  
0
30  
mA  
Recommended Operating Conditions  
Parameter  
Power Supply Voltage  
Operating Temperature  
Data Rate  
Symbol  
Min  
3.1  
0
Typ  
Max  
3.5  
Units  
Vcc  
3.3  
V
oC/ air flow 1m/sec  
Mb/s  
Topr  
70  
1250  
200  
1300  
280  
Power Supply Current  
Icc  
mA  
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Optical Transmit Power  
Output Center Wavelength  
Output Spectrum Width  
Side Mode Suppression Ratio  
Extinction Ratio  
Po  
l
0
l -5.5  
---  
---  
l
5
l +7.5  
1
dBm  
nm  
nm  
dB  
1
2
---  
-20 dB Width  
Dl  
SMSR  
ER  
30  
9
---  
---  
dB  
Output Eye  
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957  
Optical Rise Time  
tr  
tf  
0.26  
0.26  
ns  
ns  
20% to 80% Values  
20% to 80% Values  
Optical Fall Time  
Relative Intensity Noise  
Total Jitter  
RIN  
TJ  
-120  
0.227  
dB/Hz  
ns  
3
Electrical  
Data Input Current Low  
Data Input Current High  
Differential Input Voltage  
Data Input Voltage Low  
Data Input Voltage -- High  
IIL  
-350  
mA  
mA  
mV  
V
IIH  
350  
VIH - VIL  
VIL - VCC  
VIH - VCC  
300  
-2.0  
-1.1  
-1.58  
-0.74  
4
4
V
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.  
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.  
3. Measured with a 27-1 PRBS.  
4. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.  
**********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V3.0  
3
Optoway  
TRS-7380-CXX0G  
***********************************************************************************************************************************************************************  
Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3.5V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Sensitivity  
---  
Pin  
Pa  
---  
-3  
---  
---  
---  
---  
---  
---  
-24  
---  
dBm  
dBm  
dBm  
dBm  
dB  
1
Maximum Input Power  
Signal Detect -- Asserted  
Signal Detect -- Deasserted  
Signal Detect -- Hysteresis  
Wavelength of Operation  
Electrical  
---  
-24  
---  
Transition: low to high  
Transition: high to low  
Pd  
-36  
1.0  
1100  
1620  
nm  
Data Output Voltage Low  
Data Output Voltage High  
VOL - VCC  
VOH - VCC  
-2.0  
-1.1  
-2.0  
-1.1  
-1.58  
-0.74  
-1.58  
-0.74  
0.8  
V
V
V
V
V
V
2
2
Signal Detect Output Voltage -- Low VOL - VCC  
Signal Detect Output Voltage -- High VOH - VCC  
Signal Detect Output Voltage -- Low  
TRS-7380-CXX0G  
VSDL  
TRS-7380C-CXX0G  
Signal Detect Output Voltage -- High  
VSDH  
2.0  
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS at ER= 9 dB.  
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.  
CONNECTION DIAGRAM  
Receiver Signal Ground 1 (Rx GND)  
Receiver Data Out 2 (RD+)  
Receiver Data Out Bar 3 (RD- )  
Signal Detect 4 (SD)  
N/C  
Receiver Power Supply 5 (Rx Vcc)  
Transmitter Power Supply 6 (Tx Vcc)  
Transmitter Data In Bar 7 (TD- )  
Transmitter Data In 8 (TD+)  
TOP VIEW  
N/C  
Transmitter Signal Ground 9 (Tx GND)  
PIN  
1
Symbol  
Notes  
Rx GND  
RD+  
Directly connect this pin to the receiver ground plane  
See recommended circuit schematic  
2
3
RD-  
See recommended circuit schematic  
4
SD  
Active high on this indicates a received optical signal  
+3.3V dc power for the receiver section  
+3.3V dc power for the transmitter section  
See recommended circuit schematic  
5
Rx Vcc  
Tx Vcc  
TD-  
6
7
8
TD+  
See recommended circuit schematic  
9
Tx GND  
Directly connect this plan to the transmitter ground plane  
**********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V3.0  
4
Optoway  
TRS-7380-CXX0G  
***********************************************************************************************************************************************************************  
RECOMMENDED CIRCUIT SCHEMATIC  
Transceiver  
SerDes IC  
TX GND  
9
8
7
VCC 3.3V  
TD+  
TD-  
TD+  
LD  
Driver  
0.1uF  
0.1uF  
Z=50R  
Z=50R  
100R  
LVPECL  
TD-  
1uH  
TX Vcc  
6
5
Vcc 3.3V  
1uH  
VCC 3.3V  
R1  
10uF  
10uF  
10nF  
10nF  
RX Vcc  
SD  
SD Level  
R2  
VCC 3.3V  
LVPECL  
4
3
RD-  
RD-  
0.1uF  
Z=50R  
Z=50R  
POST  
Amp  
R7  
180R  
RD+  
2
1
RD+  
0.1uF  
180R  
RX GND  
CDR or PHY DEVICE  
For TTL SD Level, R1=R2=N.C., R7=100 ohm  
For PECL SD Level, R1=130 ohm, R2=82 ohm, R7=100 ohm  
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The  
power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx  
Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance.  
PACKAGE DIAGRAM  
Units in mm  
1) SC Type with Extended Shielding  
TX OPTICAL  
RX OPTICAL  
TRS-7380-CXX0-EMG / TRS-7380C-CXX0-EMG  
**********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V3.0  
5
Optoway  
TRS-7380-CXX0G  
***********************************************************************************************************************************************************************  
2) ST Type  
TX OPTICAL  
RX OPTICAL  
TRS-7380T-CXX0G / TRS-7380CT-CXX0G  
3) FC Type  
12.7  
TX OPTICAL  
2.54*8  
RX OPTICAL  
20.32  
25.4  
O1.3  
10.18  
20.32  
34.5MAX  
TRS-7380F-CXX0G / TRS-7380CF-CXX0G  
Note: Specifications subject to change without notice.  
**********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V3.0  

相关型号:

TRS-7380AG

3.3V / 1550 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380C-C290-EMG

Transceiver, Through Hole Mount,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380C-C390-EM

Fiber Optic Device,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380CF-C410

Fiber Optic Device,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380CF-C410G

Transceiver, Through Hole Mount,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380CF-C430

Fiber Optic Device,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380CF-C430G

Transceiver, Through Hole Mount,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380CF-C530G

Transceiver, Through Hole Mount,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380CT-C350

Fiber Optic Device,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380CT-C450G

Transceiver, Through Hole Mount,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380F-C350

Fiber Optic Device,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY

TRS-7380F-C450

Fiber Optic Device,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY