TRS-7380T-C510 [OPTOWAY]
Fiber Optic Device,;
| 型号： | TRS-7380T-C510 |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | Fiber Optic Device, |
| 文件： | 总5页 (文件大小：104K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Optoway
TRS-7380-CXX0
*****************************************************************************************************************************************************************************
TRS-7380-CXX0 / TRS-7380T-CXX0 / TRS-7380F-CXX0
CWDM 3.3V / 1.25 Gbps OPTICAL SINGLE-MODE SC/ST/FC TRANSCEIVER
*****************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC SM Transceiver (TRS-7380-CXX0)
l Duplex ST SM Transceiver (TRS-7380T-CXX0)
l Duplex FC SM Transceiver (TRS-7380F-CXX0)
l Compliant with IEEE-802.3z Gigabit Ethernet
l 18-Wavelength CWDM DFB LD Transmitter from
1270 nm to 1610 nm, with step 20 nm
The TRS-7380-CXX0 series single mode transceivers is
low power, high performance CWDM modules for
bi-directional serial optical data communications such as
Gigabit Ethernet and Fiber Channel. There are eighteen
center wavelengths available from 1270 nm to 1610 nm,
each step 20 nm. A guaranteed minimum optical link
budget of 24 dB is offered. The transmitter section uses a
multiple quantum well DFB laser and is a class 1 laser
compliant according to International Safety Standard IEC
60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
l 24 dB Link Budget at Least
l Industry Standard 1 x 9 Footprint
l Single +3.3 V Power Supply
l LVPECL Signal Detection Output (TRS-7380-CXX0)
l LVTTL Signal Detection Output (TRS-7380C-CXX0)
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
l CWDM
ORDER INFORMATION
P/No.
Bit Rate IEEE
Power Wavelength Voltage
Package
Temp.
(oC)
TX
RX Sens. Signal
(Mb/s) 802.3z Budget
(dB)
(nm)
(V)
Power
(dBm)
5 to 0
(dBm)
Detect
TRS-7380-CXX0
1250
ZX
> 24
CWDM*
3.3 1X9 SC/ST/FC 0 to 70
-24
PECL/TTL
CWDM Wavelength (0 to 70oC)
Central
Wavelength
Min.
(nm)
Typ.
(nm)
Max.
(nm)
Central
Wavelength
Min.
(nm)
Typ.
Max.
(nm)
(nm)
1450
1470
1490
1510
1530
1550
1570
1590
1610
-C270
-C290
-C310
-C330
-C350
-C370
-C390
-C410
-C430
1264.5
1284.5
1304.5
1324.5
1344.5
1364.5
1384.5
1404.5
1424.5
1270
1290
1310
1330
1350
1370
1390
1410
1430
1277.5
1297.5
1317.5
1337.5
1357.5
1377.5
1397.5
1417.5
1437.5
-C450
-C470
-C490
-C510
-C530
-C550
-C570
-C590
-C610
1444.5
1464.5
1484.5
1504.5
1524.5
1544.5
1564.5
1584.5
1604.5
1457.5
1477.5
1497.5
1517.5
1537.5
1557.5
1577.5
1597.5
1617.5
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2004 V3.0
Optoway
TRS-7380-CXX0
***************************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
---
Vcc
---
Min
-40
0
Max
85
Units
oC
Notes
70
oC
With air flow 1m/sec
260
4.5
oC
V
10 seconds on leads only
0
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Symbol
Min
3.1
0
Typ
Max
3.5
Units
Vcc
3.3
V
oC/ air flow 1m/sec
Mb/s
Topr
70
1250
200
1300
280
Power Supply Current
Icc
mA
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Po
l
0
l -5.5
---
---
l
---
5
l +7.5
1
dBm
nm
nm
dB
1
2
-20 dB Width
Dl
SMSR
ER
30
9
---
---
dB
Output Eye
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Optical Rise Time
tr
tf
0.26
0.26
ns
ns
20% to 80% Values
20% to 80% Values
Optical Fall Time
Relative Intensity Noise
Total Jitter
RIN
TJ
-120
0.227
dB/Hz
ns
3
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
IIL
-350
mA
mA
mV
V
IIH
350
VIH - VIL
VIL - VCC
VIH - VCC
300
-2.0
-1.1
-1.58
-0.74
4
4
V
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.
3. Measured with a 27-1 PRBS.
4. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
******************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2004 V3.0
Optoway
TRS-7380-CXX0
***************************************************************************************************************************************************************************
Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
Pin
Pa
---
-3
---
---
---
---
---
---
---
-24
---
-24
---
dBm
dBm
dBm
dBm
dB
1
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Transition: low to high
Transition: high to low
Pd
-31
1.0
1100
1620
nm
Data Output Voltage – Low
Data Output Voltage – High
VOL - VCC
VOH - VCC
-2.0
-1.1
-2.0
-1.1
-1.58
-0.74
-1.58
-0.74
0.8
V
V
V
V
V
V
2
2
Signal Detect Output Voltage -- Low VOL - VCC
Signal Detect Output Voltage -- High VOH - VCC
TRS-7380-CXX0
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
VSDL
VSDH
TRS-7380C-CXX0
2.0
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
CONNECTION DIAGRAM
Receiver Signal Ground 1 (Rx GND)
Receiver Data Out 2 (RD+)
Receiver Data Out Bar 3 (RD- )
Signal Detect 4 (SD)
N/C
Receiver Power Supply 5 (Rx Vcc)
Transmitter Power Supply 6 (Tx Vcc)
Transmitter Data In Bar 7 (TD- )
Transmitter Data In 8 (TD+)
TOP VIEW
N/C
Transmitter Signal Ground 9 (Tx GND)
PIN
1
2
Symbol
Notes
Rx GND
RD+
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
3
RD-
See recommended circuit schematic
4
5
SD
Active high on this indicates a received optical signal
+3.3V dc power for the receiver section
+3.3V dc power for the transmitter section
See recommended circuit schematic
Rx Vcc
Tx Vcc
TD-
6
7
8
TD+
See recommended circuit schematic
9
Tx GND
Directly connect this plan to the trransmitter ground plane
******************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2004 V3.0
Optoway
TRS-7380-CXX0
***************************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
Transceiver
SerDes IC
VCC 3.3V
9
TX GND
0.1uF
8
TD+
TD-
TD+
TD-
Z=50R
Z=50R
LD
Driver
120R
0.1uF
LVPECL
7
6
5
TX VCC
RX VCC
VCC 3.3V
1uH
VCC 3.3V
10nF
10nF
10uF
1uH
R1
R2
SD Level
10uF
SD
4
3
VCC 3.3V
LVPECL
Post
Amp
RD-
RD-
Z=50R
Z=50R
R7
2
1
RD+
RD+
RX GND
CDR or PHY DEVICE
For TTL SD Level R1=R2=N.C., R7=100R
For PECL SD Level R1=130R, R2=82R, R7=100R
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The
power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx
Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
PACKAGE DIAGRAM
Units in mm
1) SC Type with Extended Shielding
TX OPTICAL
RX OPTICAL
TRS-7380-CXX0-EM / TRS-7380C-CXX0-EM
******************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2004 V3.0
Optoway
TRS-7380-CXX0
***************************************************************************************************************************************************************************
2) ST Type
TX OPTICAL
RX OPTICAL
TRS-7380T-CXX0 / TRS-7380CT-CXX0
3) FC Type
12.7
TX OPTICAL
2.54*8
RX OPTICAL
20.32
25.4
O1.3
10.18
20.32
34.5MAX
TRS-7380F-CXX0 / TRS-7380CF-CXX0
Note: Specifications subject to change without notice.
******************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2004 V3.0
相关型号：
TRS-7380T-C530
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7380T-C550
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7380T-C570
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7380T-C570G
Transceiver, Through Hole Mount,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7385-CXX0G
CWDM 3.3V / 1.25 Gbps RoHS Compliant Optical Single-Mode TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7385C-C410-EMG
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7385C-C550-EMG
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7385C-C590-EMG
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7385CF-C370G
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7385CF-C410G
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7385CF-C430G
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
TRS-7385CF-C450G
Fiber Optic Device,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
©2020 ICPDF网 联系我们和版权申明