TRSL-8105AWG [OPTOWAY]
3.3V / 1310 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER; 3.3V / 1310海里/ 4.25 Gbps的数字诊断SFP LC单模收发器型号: | TRSL-8105AWG |
厂家: | OPTOWAY TECHNOLOGY INC |
描述: | 3.3V / 1310 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER |
文件: | 总4页 (文件大小:122K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1
Optoway
TRSL-8105WG
***********************************************************************************************************************************************************************
TRSL-8105WG / TRSL-8105BWG / TRSL-8105AWG
(RoHS Compliant)
3.3V / 1310 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 4.25 Gbps Bi-directional Data Links
l Duplex LC Single Mode Transceiver
l Fibre Channel FC-PI 400/200/100-SM-LC-L Compliant
l IEEE 802.3z 1000BASE-LX Compliant
The TRSL-8105WG series single mode transceiver is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
4x/2x/1x Fibre Channel and 1000BASE-LX Ethernet. This
2×7 pin SFF transceiver comply with the 2×5 standard
package defined by the SFF MSA with the exception of four
extra pins for real-time digital diagnostics and transmitter
fault indication. Digital diagnostic functions are available
via the 2-wire serial interface defined in the SFF-8472 MSA.
This module is designed for single mode fiber and operates
at a nominal wavelength of 1310 nm. The transmitter
section uses a 1310 nm multiple quantum well laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
l Small Form-Factor, RJ-45 size, 2×7 pin Package
l SFF-8472 Digital Diagnostic Function
l 1310 nm LD Transmitter
l AC/AC Coupling according to MSA
l Up to 10 km at 1.063/2.125 Gbps, 5 km at 4.25 Gb/s
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operating : TRSL-8105WG
l -10 to 85oC Operating : TRSL-8105BWG
l -40 to 85oC Operating : TRSL-8105AWG
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel
l 1.25 Gb/s 1000 BASE-LX Ethernet
ORDER INFORMATION
Bit Rate
(Gb/s)
Distance Wavelength
Temp. TX Power RX Sens.
RoHS
Compliant
P/No.
FC-PI
Package
(km)
5/10*
5/10*
5/10*
(nm)
1310
1310
1310
(oC)
(dBm)
-3 to -8
-3 to -8
-3 to -8
(dBm)
TRSL-8105WG
TRSL-8105BWG
TRSL-8105AWG
4 / 2 / 1
4 / 2 / 1
4 / 2 / 1
400/200/100
400/200/100
400/200/100
2×7 LC with DMI 0 to 70
2×7 LC with DMI -10 to 85
2×7 LC with DMI -40 to 85
-18
Yes
Yes
Yes
-18
-18
*: 10km at 1.063/2.125/1.25 Gb/s and 5 km at 4.25Gb/s.
Absolute Maximum Ratings
Parameter
Storage Temperature
Symbol
Tstg
Min
-40
0
-10
-40
-0.5
Max
85
70
85
85
Units
Notes
oC
TRSL-8105WG
TRSL-8105BWG
TRSL-8105AWG
Operating Temperature
Power Supply Voltage
Topr
Vcc
oC
V
3.6
Recommended Operating Conditions
Parameter
Power Supply Voltage
Symbol
Min
3.13
0
-10
-40
Typ
3.3
Max
3.47
70
85
85
Units / Notes
Vcc
Topr
V
oC / TRSL-8105WG
oC / TRSL-8105BWG
oC / TRSL-8105BWG
mA
Operating Temperature
Power Supply Current
Data Rate
ICC (TX+RX)
200
250
4.25
1.0625
Gb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2/1/2007 V1.0
2
Optoway
TRSL-8105WG
***********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Optical Modulation
Amplitude@4.25Gb/s
Po
-8
---
---
-3
---
dBm
1
OMA
290
mW
Output Center Wavelength
Output Spectrum Width
Optical Rise / Fall Time
(4.25Gb/s)
Relative Intensity Noise
Electrical
1280
---
1310
2
1350
nm
nm
l
Dl
RMS (σ)
tr / tf
RIN
90
ps
20 % to 80%,unfiltered
-118
dB/Hz
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
IIL
IIH
VIH - VIL
TDIS, L
TDIS, H
TASSERT
TDEASSERT
TFaultL
-350
mA
mA
V
V
V
ms
ms
V
350
2.4
0.5
Vcc
10
1
0.5
0
2.0
Peak-to-Peak
2
2
0
2.0
0.5
Vcc+0.3
3
3
TFaultH
V
1. Output power is power coupled into a 9/125 mm single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity @4.25Gb/s
Sens1
29
-18
mW
dBm
dBm
dBm
dBm
dB
4
5
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Pin
Pa
Pd
0
---
-30
1.0
1260
-18
---
Transition: low to high
Transition: high to low
---
---
---
1600
nm
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage -- High
V
OH – VOL
VOL
VOH
0.6
0
2.0
2.0
0.5
Vcc+0.3
V
V
V
6
6
4. Measured at PRBS 27-1 at BER 1E-12.
5. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 9 dB. For example, an OMA of 29 mW is
approximately equal to an average power of -17.3 dBm, average with an Extinction ratio of 9 dB.
6. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
2/1/2007 V1.0
3
Optoway
TRSL-8105WG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
MS
5 4 3 2 1 A C
6 7 8 9 10 B D
TOP VIEW
MS
PIN
C
A
1
2
3
Signal Name
N/C
Description
Not Connected
PIN
Signal Name
TX_Fault
SCL
Description
Transmitter Fault Indication
Clock line of two wire serial interface
Transmitter Data In Bar
D
B
10
9
8
7
SDA
Data line of two wire serial interface
Rreceiver ground
TD-
TD+
VeeRx
VccRx
SD
Receiver Power – 3.3V±5%
Signal Detect Output
Transmitter Data In
TX_Disable
VeeTx
Logic low to enable TXoutput
Transmitter ground
4
5
RD-
Receiver Data Out Bar
Receiver Data Out
6
RD+
VccTx
Transmitter Power – 3.3V±5%
Mounting Studs. Connect to Chassis
Ground
MS
MS
Module Definition
MOD-DEF2
PIN A
MOD-DEF1
PIN B
MOD-DEF0
Module Definition
Interpretation by Host
4
SDA
SCL
Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
RECOMMENDED CIRCUIT SCHEMATIC
7
VeeTX
8
TX_Disable
TX_Fault
TX_Disable
TX_Fault
D
4.7K to 10KΩ
TD+
9
TD+
TD-
LD
Driver
Z=50Ω
100Ω
TD- 10
6
Z=50Ω
1μH
VCC 3.3V
VccTX
10μF
10nF
10μF
10nF
10nF
1 μH
SerDes
IC
2
Protocol
IC
VccRX
10μF
RD-
RD+
SD
4
5
3
RD-
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD-
Depending on SerDes
Signal Detect
4.7K to 10KΩ
1
VeeRX
SCL
B
A
SCL
SDA
EEPORM
SDA
C
N/C
4.7K to 10KΩ
4.7K to 10KΩ
VCC 3.3V
SFF Module
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
2/1/2007 V1.0
4
Optoway
TRSL-8105WG
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM (Units in mm)
A) Standard Case
TRSL-8105WG / TRSL-8105BWG / TRSL-8105AWG
B) Extended Case
TRSL-8105WEG / TRSL-8105BWEG / TRSL-8105AWEG
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
2/1/2007 V1.0
相关型号:
©2020 ICPDF网 联系我们和版权申明