TRSL-9380FW-C510 [OPTOWAY]
Fiber Optic Device,;型号: | TRSL-9380FW-C510 |
厂家: | OPTOWAY TECHNOLOGY INC |
描述: | Fiber Optic Device, |
文件: | 总5页 (文件大小:155K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Optoway
TRSL-9380FW-CXX0
*****************************************************************************************************************************************************************************
TRSL-9380FW-CXX0
3.3V / CWDM / 2.125 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
****************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l18-wavelength CWDM Transceivers
lDuplex LC Single Mode Transceiver
lCompliant with Fiber Channel 2X/1X SM-LC-L FC-PI
lCompliant with IEEE 802.3z Gigabit Ethernet
lMulti-sourced 2X10 SFF Package Style
lCWDM DFB LD Transmitter
The TRSL-9380FW-CXX0 series single mode transceivers
is small form factor, low power, high performance module
for bi-directional serial optical data communications such
as IEEE 802.3z Gigabit Ethernet and 1X/2X Fiber channel.
There are eighteen center wavelengths available from 1270
nm to 1610 nm, each step 20 nm. A guaranteed minimum
optical link budget of 23 dB is offered. The transmitter
section uses a multiple quantum well 1550 nm DFB laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A
LVPECL logic interface simplifies interface to external
circuitry.
l23 dB Link Power Budget At Least
lAnalog Monitor Function
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
lAC/AC Coupled Signal Input / Output
lLVPECL Signal Input / Output
lLVTTL Signal Detection Output
lSingle +3.3 V Power Supply
l0 to 70oC Operation
LASER SAFETY
lWave Solderable and Aqueous Washable
lClass 1 Laser International Safety Standard IEC-60825
Compliant
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
lATM Switches and Routers
lSONET / SDH Switch Infrastructure
lXDSL Applications
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
FC
Power Wavelength Package
Temp. TX Power RX Sens.
Signal
Detect
Output
Budget
(dB)
(nm)
(oC)
(dBm)
(dBm)
TRSL-9380FW-CXX0 2125/1063 200/100
CWDM Wavelength (0 to 70oC)
> 23
CWDM*
2X10 LC
Central
0 to 70
5 to 0
-23
LVTTL
Central
Wavelength
-C270
Min.
(nm)
Typ.
(nm)
1270
1290
1310
1330
1350
1370
1390
1410
1430
Max.
Min.
(nm)
Typ.
Max.
(nm)
(nm)
Wavelength
-C450
-C470
-C490
-C510
-C530
-C550
-C570
-C590
-C610
(nm)
1450
1470
1490
1510
1530
1550
1570
1590
1610
1264.5
1284.5
1304.5
1324.5
1344.5
1364.5
1384.5
1404.5
1424.5
1277.5
1297.5
1317.5
1337.5
1357.5
1377.5
1397.5
1417.5
1437.5
1444.5
1464.5
1484.5
1504.5
1524.5
1544.5
1564.5
1584.5
1604.5
1457.5
1477.5
1497.5
1517.5
1537.5
1557.5
1577.5
1597.5
1617.5
-C290
-C310
-C330
-C350
-C370
-C390
-C410
-C430
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V1.0
Optoway
TRSL-9380FW-CXX0
******************************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
---
Vcc
---
Min
-40
0
Max
85
70
260
3.6
Vcc
Units
oC
Notes
oC
With air flow 1m/sec
10 seconds on leads only
oC
V
V
-0.5
-0.5
Output Current
Iout
0
50
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Symbol
Vcc
Topr
Min
3.135
0
Typ
3.3
Max
3.465
70
Units / Notes
V
oC / air flow 1m/sec
Mb/s
1000
2125
Power Supply Current
Icc
280
mA
Transmitter Specifications (0oC < Topr < 70oC, 3.135V < Vcc < 3.465V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Po
l
Dl
0
l -5.5
---
---
5
l +7.5
1
dBm
nm
nm
1
2
l
-20 dB Width
Side Mode Suppression Ratio
Extinction Ratio
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Electrical
SMSR
ER
tr
tf
RIN
30
dB
dB
ps
ps
dB/Hz
9
---
160
160
-120
20% to 80% Values
20% to 80% Values
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
TX Disable Deassert Time
IIL
IIH
VIH - VIL
VIL - VCC
VIH - VCC
TDIS
TDIS
TASSERT
TDEASSERT
-350
mA
mA
mV
V
V
V
V
ms
ms
350
1600
-1.58
-0.74
0.5
Vcc
10
50
300
-2.0
-1.1
0
3
3
2.0
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.
3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
Optoway
TRSL-9380FW-CXX0
******************************************************************************************************************************************************************************
Receiver Specifications (0oC < Topr < 70oC, 3.135V < Vcc < 3.465V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity @ 2.125 Gbps
Sensitivity @ 1.25 Gbps
Maximum Input Power
Sen1
Sen2
Pin
---
-23
-24
---
dBm
dBm
dBm
dBm
dBm
dB
1
1
-3
---
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Pa
---
---
---
---
-23
---
4.0
1620
Transition: low to high
Transition: high to low
Pd
-35
1.0
1100
nm
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
VOL - VCC
VOH - VCC
VSDL
-2.0
-1.1
0
-1.58
-0.74
0.8
V
V
V
V
2
2
VSDH
2.0
Vcc+0.3
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
ANALOG DIAGNOSTICS FUNCTIONS
Parameter
Symbol
Min
Typ
Max
Units
Notes
Transmitter
Laser Bias Current Monitor
Bmon+, Bmon-
0
0
Vcc
Vcc
V
V
1
2
Monitor Photodiode Current Monitor Pmon+,Pmon-
Receiver
Received Photocurrent
Rpd
R
0
1
mA
A/W
V
3
Photodiode Responsivity
Applied Voltage at VpdR pin
0.5
2.4
0.9
1.0
Vcc
Vpd
3
Notes: 1. PIN 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following
formula: Ibias = V (Bmon+ - Bmon-) / 10 Ω. See below the equivalent circuit.
2. PIN 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the
following formula: Imon = V (Pmon+ - Pon-) / 200Ω. See below the equivalent circuit.
3. PIN 1 is used to monitor the received photocurrent. It must be connected to a positive voltage within the specified
above. The received power is given by the photocurrent multiplied by the photodiode responsivity.
VCC
VCC
LD
Monitor PD
3K
Vpdr
Pmon+
Pmon-
RX PD
BM+
BM-
I mon
3K
10ohm
I bias
I pd
200ohm
3K
3K
bias
circuit
control
circuit
T
Analog Monitoring Function Connections
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
Optoway
TRSL-9380FW-CXX0
******************************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN Symbol
Notes
PIN Symbol
Notes
Receiver power monitor. This pin must be
connected to a positive power supply (Vcc),
+3.3V dc transmitter power supply
1
VpdR
11 VccT
preferably via
a
small resistor. Supplier
photocurrent and maybe used to monitor receiver
power.
Receiver ground.
Receiver ground.
Transmitter ground.
2
3
VeeR
VeeR
12 VeeT
13 T Dis
Transmitter Disable. Connect this pin to logic “1”
to disable module. To enable module connect to
logic low “0”
No connected
No connected
Receiver ground.
+3.3V dc receiver power supply
Signal detect. Logic 1 indicate a normal operation.
Transmitter Data In
Transmitter Data In Bar
Transmitter ground.
Laser Bias Monitoring – Negative End
Laser Bias Monitoring – Positive End
(Bmon+ - Bmon-) = 10 Ω X laser bias current
Laser Power Monitoring -- Negative end
Laser Power Monitoring -- Positive end
(Pmon+ - Pmon-) = 200 Ω X monitor photdiode
current
4
5
6
7
8
NC
NC
VeeR
VccR
SD
14 TD +
15
16 VeeT
17 Bmon
TD -
-
18 Bmon+
Receiver Dataout Bar
Receiver Dataout
9
10
RD-
RD+
19 Pmon-
20 Pmon+
MS
MS
Mounting Studs. Connect to Chassis Ground
RECOMMENDED CIRCUIT SCHEMATIC
Vcc3.3V
MICROSTRIP5
TD-
Tdis(LVTTL)
Bmon-
Z=50R
LVPECL
MICROSTRIP6
TD+
Z=5OR
Bmon+
Pmon-
L2
Pmon+
VCC3.3V
1uH
C2
C3
C4
PHY DEVICE
100nF
100nF
10uF
L1
TX
RX
1uH
C1
100nF
C8
10uF
Vcc3.3V
RD+
R14
200R
VCCRX(3.3V)
MICROSTRIP7
LVPECL
100R
Z=50R
10nF
MICROSTRIP8
RD-
Z=5OR
3K
SD
Vpdr
TO LVTTL STAGE
Note: 1. TX input is terminated inside the module.
2. Veer and Veet are not internally connected to each other.
3. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance
matching.
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
Optoway
TRSL-9380FW-CXX0
******************************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) Standard Case
TRSL-9380FW-CXX0
2) Extended Case
TRSL-9380FWE-CXX0
Note: Specifications subject to change without notice.
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
相关型号:
©2020 ICPDF网 联系我们和版权申明