XPS-2341W-D40G [OPTOWAY]
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbE; 万兆/ 40公里/百GHz的DWDM XFP单模光纤收发器，用于万兆以太网
| 型号： | XPS-2341W-D40G |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbE |
| 文件： | 总10页 (文件大小：256K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
XPS-2341W-DXXG
(RoHS Compliant)
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbE / OC-192
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Supports 9.95 Gbps to 10.5 Gbps
l Complaint with XFP MSA
XPS-2341W-DXXG series DWDM transceiver is
designed for single-mode fibre serial optical data
communications such as 10G Ethernet 10GBASE-ER/EW
and 10G Fibre Channel.
l Compliant with XFI 10G Serial Electrical Interface
l Maximum Link Length of 40 km
l Temperature-stabilized DWDM EML Transmitter
l 100 GHz ITU Grid, C Band
l 2-Wire Interface for Integrated Digital Diagnostic
Monitoring
This module is designed for single mode fiber and
operates at a nominal wavelength of 100GHz ITU Grid, C
Band DWDM wavelength. A guaranteed minimum optical
link budget of 14 dB is offered. The transmitter section
l XFI Loopback Mode
consists
of
a
temperature-stabilized
DWDM
l No reference Clock required
l Power Dissipation < 3.5 W
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section incorporates a PIN
photodiode integrated with a trans-impedance preamplifier
(TIA) and signal conditioner.
l Dual 5V and +3.3 V Power Supply
l RoHS-6 Compliant
l -5 to 70oC Case Operating Temperature
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Dual 5V and 3.3V power supply are used. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
APPLICATIONS
l 10GBASE-ER at 10.3125 Gb/s
l 10GBASE-EW at 9.953 Gb/s
l 40 km 10GFC at 10.51875 Gb/s
l 10G SONET/SDH
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
2
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
10G
Distance
(km)
Spacing
(GHz)
Wavelength
(nm)
Package
Case Temp
(oC)
RoHS
Compliant
XPS-2341W-DXXG 9.95 – 10.52 ER / EW
40
100
DWDM*
XFP with DMI
-5 to 70
Yes
XX: 100GHz ITU Grid wavelength (Please see below)
Channel #
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Product code
Frequency (THz)
192.1
192.2
192.3
192.4
192.5
192.6
192.7
192.8
192.9
193.0
193.1
193.2
193.3
193.4
193.5
193.6
193.7
193.8
193.9
194.0
194.1
194.2
194.3
194.4
194.5
194.6
194.7
194.8
194.9
195.0
195.1
195.2
195.3
195.4
195.5
195.6
195.7
195.8
195.9
196.0
Center Wavelength (nm)
1560.61
1559.79
1558.98
1558.17
1557.36
1556.55
1555.75
1554.94
1554.13
1553.33
1552.52
1551.72
1550.92
1550.12
1549.32
1548.51
1547.72
1546.92
1546.12
1545.32
1544.53
1543.73
1542.94
1542.14
1541.35
1540.56
1539.77
1538.98
1538.19
1537.40
1536.61
1535.82
1535.04
1534.25
1533.47
1532.68
1531.90
1531.12
1530.33
1529.55
Label
XPS-2341W-D21G
XPS-2341W-D22G
XPS-2341W-D23G
XPS-2341W-D24G
XPS-2341W-D25G
XPS-2341W-D26G
XPS-2341W-D27G
XPS-2341W-D28G
XPS-2341W-D29G
XPS-2341W-D30G
XPS-2341W-D31G
XPS-2341W-D32G
XPS-2341W-D33G
XPS-2341W-D34G
XPS-2341W-D35G
XPS-2341W-D36G
XPS-2341W-D37G
XPS-2341W-D38G
XPS-2341W-D39G
XPS-2341W-D40G
XPS-2341W-D41G
XPS-2341W-D42G
XPS-2341W-D43G
XPS-2341W-D44G
XPS-2341W-D45G
XPS-2341W-D46G
XPS-2341W-D47G
XPS-2341W-D48G
XPS-2341W-D49G
XPS-2341W-D50G
XPS-2341W-D51G
XPS-2341W-D52G
XPS-2341W-D53G
XPS-2341W-D54G
XPS-2341W-D55G
XPS-2341W-D56G
XPS-2341W-D57G
XPS-2341W-D58G
XPS-2341W-D59G
XPS-2341W-D60G
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
D32
D33
D34
D35
D36
D37
D38
D39
D40
D41
D42
D43
D44
D45
D46
D47
D48
D49
D50
D51
D52
D53
D54
D55
D56
D57
D58
D59
D60
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
3
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
-40
-5
Max
85
Units
oC
Notes
Storage Temperature
Operating Case Temperature
Relative Humidity
Topr
RH
70
oC
0
85
%
Non condensing
Power Supply Voltage (5V)
Power Supply Voltage (3.3V)
Receiver Input Optical Power
Vcc5
-0.5
-0.5
6.0
3.6
4
V
VCC3
V
Mip
dBm
Received average power
Recommended Operating Conditions
Parameter
Symbol
Min
4.75
3.13
Typ
5
Max
5.25
3.47
300
750
3.5
Units / Notes
VCC
5
3
Power Supply Voltage (5V)
Power Supply Voltage (3.3V)
Power Supply Current (@5V)
Power Supply Current (@3.3V)
Power Dissipation
V
V
VCC
3.3
ICC5
mA / 1
mA / 1
W
oC
ICC3
PD
Topr
Operating Case Temperature
Data Rate
-5
70
9.95
10.3125
10.5
Gb/s
1. Including in rush current. Maximum module current ramp rate is 100 mA/ms.
Transmitter Optical Specifications (Topr= -5 to 70oC, Vcc5=5V±5%, Vcc3 = 3.3V ±5%)
Parameter
Average Launch Power
Extinction Ratio
Symbol
Po, Avg
ER
Min
-2
Typ
Max
Units
dBm
dB
Notes
+2
2
8.2
Center Wavelength Spacing
Transmitter Center Wavelength
-- over life time
100
X
GHz
pm
3
4
X-100
30
X+100
l c
Output Spectrum Width
Side Mode Suppression Ratio
Transmitter and Dispersion
Penalty @ 800 ps/nm
Relative Intensity Noise
Eye Mask 1
σl
1
2
nm
dB
dB
-20 dB width
SMSR
TDP
RIN
-130
-30
dB/Hz
dBm
IEEE 802.3ae
10G Ethernet
Average Launch Power of OFF
Transmitter
2. Output power is power coupled into a 9/125 mm single-mode fiber.
3. Corresponds to approximately 0.8 nm.
4. X = specified ITU Grid wavelength. Wavelength stability is achieved within 60 seconds of power up.
Receiver Optical Specifications (Topr= -5 to 70oC, Vcc5=5V±5%,Vcc3 = 3.3V ±5%)
Parameter
Symbol
Min
Typ
Max
Units
dBm
dBm
Notes
Sensitivity
Sen1
-16
5
Stressed Receiver Sensitivity,
OMA
Sen2
-11.3
Receiver Overload
LOS -- Deasserted
LOS -- Asserted
PMAX
LOSD
LOSA
-1
---
---
---
---
---
dBm
dBm
dBm
dB
-20
---
Transition: low to high
Transition: high to low
-28
0.5
LOS -- Hysteresis
Wavelength of Operation
Optical Return Loss
l c
1260
1600
-27
nm
ORL
dB
5. Measured with worst ER; BER < 10-12 and PRBS 231-1. Equivalent to -14.3 dBm OMA at ER=8.2 dB.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
4
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
Electrical Characteristics
Parameter
Symbol
Min
Typ
Max
Units
Notes
High-Speed Signal (CML) Interface Specification
Input Data Rate
9.95
10.3125
100
10.5
Gb/s
Ω
6
Differential Input Impedance
Differential Data Input Amplitude
Output Data Rate
Rin
120
820
mVpp
Gb/s
Ω
7, Internally AC coupled
6
9.95
10.3125
100
10.5
Differential Output Impedance
Differential Data Output
Amplitude
Rout
340
650
850
mVpp
7, Internally AC coupled
Low-Speed Signal (LVTTL) Interface Specification
Input High Voltage
2.0
GND
2.4
Vcc
0.8
V
V
V
V
Input Low Voltage
Output High Voltage
Vcc
0.5
Output Low Voltage
GND
Reference Clock (LVPECL) Interface Specification
No reference clock required.
6. 10GBASE-ER/EW and 10G Fibre Channel.
7. The differential input and output amplitudes are per XFP MSA mask at points B’ and C’.
Transceiver Timing Characteristics
Parameter
TX_DIS Assert Time
TX_DIS Negate Time
Time to Initialize
Symbol
t_off
Min
Typ
Max
10
2
Units
ms
Notes
t_on
ms
ms
ms
ms
t_init
300
200
500
100
300
1
Interrupt Assert Delay
Interrupt Negate Delay
P_Down/PST Assert Delay
P_Down Nagate Delay
Mod_NR Assert Delay
Mod_NR Negate Delay
Mod_Desel Assert Time
Mod_Desel De-Assert Time
P_Down Reset Time
interrupt_on
interrupt_off
P_Down/RST_on
P_Down/RST_off
Mod_nr_on
Mod_nr_off
T_Mod_Desel
T_Mod_Sel
T_reset
ms
ms
ms
ms
ms
ms
ms
1
2
2
10
0
RX_LOS Assert Delay
RX_LOS Negate Delay
Serial ID Clock Rate
T_Los_on
T_Los_off
fSCL
100
100
400
ms
ms
kHz
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
5
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
MANAGEMENT INTERFACE
The structure of the memory map is shown in Figure 1, which is accessible over a 2-wire serial interface at the 8-bit
address 1010000X (A0h). The normal 256 byte I2C address space is divided into low and upper blocks of 128 Bytes. The
lower block of 128 Bytes is always directly available and is used for the diagnostics and control function. Multiple blocks of
memories are available in the upper 128 Bytes of the address space. These are individually addressed through a table select
Byte which the user enters into a location in the lower address space. Thus, there is a total available address space of 128*256
= 32 Kbytes in this upper memory space. The contents of Table 01h are listed in Table 1 below. Please refer SFF INF-8077i
(Revision 4.5) for detailed information.
Figure 1. 2-wire Serial Digital Diagnostic Memory Map
Table 1 Monitoring Specification
Data Address
96 ~ 97
Parameter
Temperature
Accuracy
± 3oC
98 ~ 99
Reserved
100 ~ 101
102 ~ 103
104 ~ 105
106 ~ 107
Tx Bias
Tx Power
Rx Power
Vcc3
± 10%
± 2dB
± 2dB
± 3%
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
6
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
Table 3 PIN Description
PIN
1
Logic
Signal Name
GND
Description
Note
1
3
Module Ground
2
VEE5
-5.2V Power Supply (Not required)
Module De-select; When held low allows module to respond to 2-wire serial interface
3
LVTTL-I
Mod_Desel
Interrupt; Indicates presence of an important condition which can be read over the
2wire serial interface
4
LVTTL-O
2
Interrupt
5
6
7
8
9
LVTTL-I
TX_DIS
VCC5
GND
Transmitter Disable; Turns off transmitter laser output
+5V Power Supply
3
1
Module Ground
VCC3
VCC3
+3.3V Power Supply
+3.3V Power Supply
10 LVTTL-I/O SCL
11 LVTTL-I/O SDA
Serial 2-wire interface clock
Serial 2-wire interface data line
Indicates Module is not present. Grounded in the Module
Module Not Ready; Indicating Module Operational Fault
Receiver Loss Of Signal Indicator
Module Ground
2
2
2
2
2
1
1
12 LVTTL-O
Mod_Abs
13 LVTTL-O
Mod_NR
RX_LOS
GND
14 LVTTL-O
15
16
GND
Module Ground
17 CML-O
RD-
Receiver Inverted Data Output
Receiver Non-Inverted Data Output
Module Ground
18 CML-O
RD+
19
20
GND
1
3
VCC2
+1.8V Power Supply (Not required)
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
7
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
21 LVTTL-I
P_Down/RST Power down; When high, requires the module to limit power consumption to 1.5W or
below. 2-Wire serial interface must be functional in the low power mode.
Reset; The falling edge initiates a complete reset of the module including the 2-wire
serial interface, equivalent to a power cycle.
22
VCC2
+1.8V Power Supply (Not required)
Module Ground
3
1
4
23
GND
24 PECL-I
RefCLK+
Reference Clock Non-Inverted Input, AC coupled on the host board. (Not used.
Internally terminated to 50 ohm (100 ohm diff.))
Reference Clock Inverted Input, AC coupled on the host board. (Not used. Internally
terminated to 50 ohm (100 ohm diff.))
Module Ground
25 PECL-I
RefCLK-
4
26
GND
GND
TD-
1
1
27
Module Ground
28 CML-I
29 CML-I
30
Transmitter Inverted Data Input
TD+
GND
Transmitter Non-Inverted Data Input
Module Ground
1
1. Module ground pins GND are isolated from the module case and chassis ground within the module.
2. Shall be pulled up with 4.7K-10Kohms to a voltage between 3.15V and 3.45V on the host board.
3. These PINs are open within module.
4. A Reference Clock input is not required. If present, it will be ignored.
MECHANICAL SPECIFICATION (UNITS IN MM)
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
8
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
RECOMMENDED POWER CIRCUIT SCHEMATIC
Host Board
VCC5
Optional
Host +5V
4.7μH
22μF
22μF
22μF
22μF
0.1μF
0.1μF
VCC3
Host +3.3V
4.7μH
4.7μH
4.7μH
0.1μF
0.1μF
0.1μF
0.1μF
XFP Module
VCC2
0.1μF
Optional
Host +1.8V
VEE5
0.1μF
Optional
Host -5.2V
RECOMMENDED INTERFACE CIRCUIT
XFP module
Host Board
SerDat Out+
TD +
Z=50Ω
CML
100Ω
CML
TD -
SerDat Out-
Z=50Ω
SerDat In+
SerDat In-
RD +
Z=50Ω
Z=50Ω
CML
CML
100Ω
RD -
REFCLKP
Vcc(+3.3V)
100Ω
4.7K to 10KΩ
REFCLKN
RX_LOS
INTERRUPT
SDA
VCC(+3.3V)
SCL
MOD_NR
MOD_abs
TX_DIS
10KΩ
GND
MOD_DeSel
P_Down/RST
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
9
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
Table 2 Serial ID Memory Contents (Table 01h)
Field
Address Size
(Byte)
Name of Filed
Description
Hex
128
1
Identifier
XFP
06
power consumption < 3.5W, no Ref Colck
129
130
1
1
Ext. Identifier
Connector type
required
LC connector
90
07
10GBASE-ER/EW, 10GFC 1200-SM-LL-L
131~138
139
140
141
142
143
144
145
146
8
1
1
1
1
1
1
1
1
1
Transceiver
Encoding
BR-Min
BR-Max
length (SMF)-Km
Length (E-50µm)
Length (50 µm)
Length (62.5 µm)
Length (Copper)
Device Tech
10G SONET/SDH
64B/66B, 8B10B, SONET Scrambled & NRZ
9.9Gbps
10.5Gbps
40 Km
0 m
0 m
0 m
22 40 00 00 00 00 00 00
F0
63
69
28
00
00
00
0 m
00
74
147
DWDM EML, PIN detector
4F 50 54 4F 57 41 59 20
20 20 20 20 20 20 20 20
CDR supports 9.953G ~ 10.5G & XFI Loopback E1
00 0E FA
148~163
164
165~167
16
1
3
Vendor name
CDR Support
Vendor OUI
OPTOWAY
58 50 53 2D 32 33 34 31
57 2D 44 3x 3x 47 20 20
xx xx
168~183
184~185
186~187
16
2
2
Vendor PN
Vendor rev
Wavelength
Wavelength
Tolerance
XPS-2341W-DXXG
ASCII (“31 61” means 1a revision)
1XXX.XXnm
xx xx
188~189
190
191
2
1
1
+/- 0.1nm
70deg
00 14
46
Max Case Temp
CC_BASE
Check sum of Byte 128 -- 190
3.5 Wmax, 1.5W pd_max , 750mA 3.3V, 500
mA 5V
192~195
196~211
212~219
220
4
16
8
Power Supply
Vendor SN
AF 96 A8 00
xx xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
ASCII
ASCII Year (2 Byte), Month (2 Byte), Day (2
Byte)
Date code
Diagnostic
Monitoring Type
xx xx xx xx xx xx 20 20
08
1
No BER Support, Average Power
Optional Soft TX_DISABLE implemented,
Optional Soft P_down implemented
AUX1 for Vcc3, AUX2 for Vcc5.
Check sum of Byte 192 -- 222
221
222
223
1
1
1
Enhanced Options
Aux Monitoring
CC_EXT
60
76
224~255
32
Vendor Specific
Reserved
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
10
Optoway
XPS-2341W-DXXG
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
Subject
Release Date
1.0
Initial datasheet
2010/7/1
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2010 V1.0
相关型号：
XPS-2341W-D41G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D42G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D43G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D44G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D45G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D46G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D47G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D48G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D49G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D50G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D51G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
XPS-2341W-D52G
10Gbps / 40 km / 100 GHz DWDM XFP Single-Mode Optical Transceiver for 10GbEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
©2020 ICPDF网 联系我们和版权申明