GD-CSSRM2.14 [OSRAM]
SMT ceramic package with silicone resin and silicone lens;型号: | GD-CSSRM2.14 |
厂家: | OSRAM GMBH |
描述: | SMT ceramic package with silicone resin and silicone lens |
文件: | 总22页 (文件大小:3352K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2018-02-23
OSLON Square
Datasheet
Version 1.0
GD CSSRM2.14
This most compact high-power LED (2 W class) allows
dense clustering and simple circuit designs. Its
extremely low thermal resistance helps to keep the
efficiency remarkably high even when driven at high
currents. High reliability. Long lifetime.
Diese außerordentlich kompakte Hochleistungs-LED
(2-W-Klasse) erlaubt eine dichte Anordnung und
einfache Schaltungsentwürfe. Der äußerst niedrige
Wärmewiderstand sorgt für einen hohen
Wirkungsgrad auch bei hohen Strömen. Hohe
Zuverlässigkeit. Lange Lebensdauer.
Features:
Besondere Merkmale:
•
Package: SMT ceramic package with silicone resin
and silicone lens
•
Gehäusetyp: SMT-Keramikgehäuse mit
Silikonverguss und -linse
•
•
•
•
Viewing angle at 50 % IV: 120°
Color: 445 nm (deep blue)
•
•
Abstrahlwinkel bei 50 % IV: 120°
Farbe: 445 nm (deep blue)
Strahlungsfluss: typ. 1392 mW @ 700mA
Radiant Flux: typ. 1392 mW @ 700mA
•
Radiant Flux: typ. 731 mW @ 350mA
•
Strahlungsfluss: typ. 731 mW @ 350mA
Photosynthetisch wirksamer Photonenstrom:
typ. 5.22 μmol/s
•
Photosynthetic Photon Flux: typ. 5.22 μmol/s
•
•
•
•
Radiant Efficiency: typ. 69 % @ 700mA
Radiant Efficiency: typ. 72 % @ 350mA
Corrosion Robustness: Superior Corrosion
Robustness
•
Lichtausbeute: typ. 69 % @ 700mA
Lichtausbeute: typ. 72 % @ 350mA
Korrosionsstabilität: Höchste
Korrosionsbeständigkeit
•
•
Applications
Anwendungen
•
•
•
•
•
•
Architectural lighting
Stage lighting
•
•
•
•
•
•
Architekturbeleuchtung
Bühnenbeleuchtung
Shop lighting
Ladenbeleuchtung
Color changing fixtures
Remote-phosphor fixtures
Horticultural Lighting
farbveränderliche Lichtquellen
Remote-Phosphor Lichtquellen
Gewächshausbeleuchtung
2018-02-23
1
Version 1.0
GD CSSRM2.14
Ordering Information
Bestellinformation
Type:
Typ:
Radiant Power 1) page 21
Strahlungsleistung 1) Seite 21
IF = 700 mA
Ordering Code
Bestellnummer
ΦE [mW]
GD CSSRM2.14-ARAT-24-1
1300 ... 1640
Q65112A4742
Note:
The above Type Numbers represent the order groups which include only a few brightness groups (see page 5).
Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. GD
CSSRM2.14-ARAT-24-1 means that only one group AR, AS, AT will be shippable for any packing unit.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any
one packing unit. E. g. GD CSSRM2.14-ARAT-24-1 means that only one wavelength group 2,3,4 will be shippable. GD
CSSRM2.14-ARAT-24-1 means that the device will be shipped within the specified limits as stated on page 6.
In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped
on any packing unit. E. g. GD CSSRM2.14-ARAT-24-1 means that only one forward voltage group L1,L2,M1,M2 will be shippable.
Anm.:
Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen
(siehe Seite 5).
Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. GD CSSRM2.14-ARAT-24-1 bedeutet, dass in
einer Verpackungseinheit nur eine der Helligkeitsgruppen AR, AS, AT enhalten ist.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine
Wellenlängengruppe geliefert. Z. B. GD CSSRM2.14-ARAT-24-1 bedeutet, dass in einer Verpackungseinheit nur eine der
Wellenlängengruppen 2,3,4 enthalten ist (siehe Seite 6). GD CSSRM2.14-ARAT-24-1 bedeutet, dass das Bauteil innerhalb der
spezifizierten Grenzen geliefert wird.
Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit
wird nur eine Durchlassspannungsgruppe geliefert. Z. B. GD CSSRM2.14-ARAT-24-1 bedeutet, dass nach
Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen
L1,L2,M1,M2 enthalten (siehe Seite 6).
2018-02-23
2
Version 1.0
GD CSSRM2.14
Maximum Ratings
Grenzwerte
Parameter
Symbol
Symbol
Top
Values
Werte
Unit
Einheit
°C
Bezeichnung
Operating temperature range
Betriebstemperatur
-40 ... 120
Storage temperature range
Lagertemperatur
Tstg
Tj, abs
Tj
-40 ... 120
150
°C
°C
°C
Junction temperature absolute *
Sperrschichttemperatur absolut *
Junction temperature
Sperrschichttemperatur
135
Forward current
Durchlassstrom
(TJ = 25 °C)
IF
200 ... 2000
mA
Surge current
Stoßstrom
IFM
VR
2000
1.2
mA
V
Reverse voltage 1) page 21
Sperrspannung 1) Seite 21
(TJ = 25 °C)
Reverse current 2) page 21
IR
200
8
mA
kV
Sperrstrom 2) Seite 21
ESD withstand voltage
ESD Festigkeit
(acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class
3B)
VESD
Note:
Anm:
* This is verified by testing 30 pieces. Pass criteria: No catastrophic failures allowed, luminous flux must be better than
L70B50 after 1000 h.
* Dieser Wert wird durch den Test von 30 Bauteilen abgesichert. Dabei dürfen keine Totalausfälle auftreten und der
Lichtstrom muß nach 1000 h über L70B50 liegen.
2018-02-23
3
Version 1.0
GD CSSRM2.14
Characteristics (TJ = 25 °C; IF = 700 mA)
Kennwerte
Parameter
Symbol
Symbol
λpeak
Values
Unit
Bezeichnung
Werte
Einheit
nm
Wavelength at peak emission
(typ.)
445
Wellenlänge d. emittierten Lichtes
Dominant Wavelength 3) page 21
(min.)
(typ.)
(max.)
λdom
λdom
λdom
444
450
457
nm
nm
nm
Dominantwellenlänge 3) Seite 21
Spectral bandwidth at 50% Irel max
Spektrale Bandbreite b. 50% Irel max
(typ.)
∆λ
18
nm
Viewing angle at 50 % IV
Abstrahlwinkel bei 50 % IV
(typ.)
2ϕ
120
°
Forward voltage
Durchlassspannung
(min.)
(typ.)
(max.)
VF
VF
VF
2.80
2.90
3.20
V
V
V
"Electrical" thermal resistance junction / solder point (typ.)
Rth JS el
1.3
K/W
"Elektrischer" Wärmewiderstand Sperrschicht /
Lötpad
(with efficiency ηe = 65 %)
Note:
Anm.:
Individual forward voltage groups see next page
Durchlassspannungsgruppen siehe nächste Seite
2018-02-23
4
Version 1.0
GD CSSRM2.14
Brightness Groups
Helligkeitsgruppen
Forward Voltage Groups
Durchlassspannungsgruppen
Group
Gruppe
L1
(min.) VF [V]
2.80
(max.) VF [V]
2.90
L2
2.90
3.00
M1
3.00
3.10
M2
3.10
3.20
Dominant Wavelength Groups 7) page 21
Dominant Wellenlängengruppen 7) Seite 21
Group
deep blue
(min.) λdom (max.) λdom
Gruppe
[nm]
444
449
453
[nm]
449
453
457
2
3
4
Note:
Anm.:
No packing unit / tape ever contains more than one color group for each selection.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Farbe enthalten.
2018-02-23
5
Version 1.0
GD CSSRM2.14
Group Name on Label
Gruppenbezeichnung auf Etikett
Example: AQ-2-L1
Beispiel: AQ-2-L1
Brightness
Helligkeit
Wavelength
Wellenlänge
Forward Voltage
Durchlassspannung
AQ
2
L1
Note:
Anm.:
No packing unit / tape ever contains more than one group for each selection.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
2018-02-23
6
Version 1.0
GD CSSRM2.14
Relative Spectral Emission - V(λ) = Standard eye response curve 6) page 21
Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 6) Seite 21
Φrel = f (λ); TJ = 25 °C; IF = 700 mA
GD CSSRM2.14
1,0
Φ
rel
: Vλ
: Deep blue
0,8
0,6
0,4
0,2
0,0
350
400
450
500
550
600
650
700
750
800
λ
[nm]
Radiation Characteristics 6) page 21
Abstrahlcharakteristik 6) Seite 21
Irel = f (ϕ); TJ = 25 °C
GD CSSRM2.14
ϕ
[°]
0° 10° 20° 30° 40° 50° 60° 70° 80° 90°
-10°
1,0
0,8
0,6
0,4
0,2
0,0
-20°
Irel
-30°
-40°
-50°
-60°
-70°
-80°
-90°
2018-02-23
7
Version 1.0
GD CSSRM2.14
Forward Current 6) page 21 , 8) page 21
Durchlassstrom 6) Seite 21 , 8) Seite 21
Relative Radiant Power 6) page 21 , 8) page 21
Relative Strahlungsleistung 6) Seite 21 , 8) Seite 21
ΦE/ΦE(700 mA) = f(IF); TJ = 25 °C
GD CSSRM2.14
IF = f (VF); TJ = 25 °C
GD CSSRM2.14
Φ
2000
1800
1600
1400
1200
1000
800
3
E
IF [mA]
Φ
E(700mA)
2
1
0
-1
-2
-3
600
400
0
0
0
0
0
0
0
200
2,7
0
0
0
0
0
0
0
0
2
4
6
8
2
6
2,8
2,9
3,0
3,1
3,2
1
1
2
VF [V]
IF [mA]
Dominant Wavelength 6) page 21
Dominante Wellenlänge 6) Seite 21
Δλdom = f(IF); TJ = 25 °C
GD CSSRM2.14
10
∆λ dom [nm]
5
0
-5
-10
0
0
0
0
0
0
0
0
0
0
0
0
0
2
0
6
2
4
6
8
0
1
1
2
IF [mA]
2018-02-23
8
Version 1.0
GD CSSRM2.14
Relative Forward Voltage 6) page 21
Relative Vorwärtsspannung 6) Seite 21
Relative Radiant Power 6) page 21
Relative Strahlungsleistung 6) Seite 21
ΦE/ΦE(25 °C) = f(Tj); IF = 700 mA
GD CSSRM2.14
ΔVF = VF - VF(25 °C) = f(Tj); IF = 700 mA
GD CSSRM2.14
Φ
0,2
1,2
1,0
0,8
0,6
0,4
0,2
0,0
E
∆VF [V]
Φ
E (25°C)
0,1
0,0
-0,1
-0,2
-40 -20
0
20 40 60 80 100 120
-40 -20
0
20 40 60 80 100 120
Tj [°C]
Tj [°C]
Dominant Wavelength 6) page 21
Dominante Wellenlänge 6) Seite 21
Δλdom = λdom - λdom (25 °C) = f(Tj); IF = 700 mA
GD CSSRM2.14
10
∆λ dom [nm]
5
0
-5
-10
-40 -20
0
20 40 60 80 100 120
Tj [°C]
2018-02-23
9
Version 1.0
GD CSSRM2.14
Max. Permissible Forward Current
Max. zulässiger Durchlassstrom
IF = f (T)
OHL05417
I (mA)
F
2000
1800
1600
1400
1200
1000
800
600
400
200
Donot use below200 mA
0
0
20
40
60
80
100 120
T (°C)
S
2018-02-23
10
Version 1.0
GD CSSRM2.14
Package Outline 9) page 21
Maßzeichnung 9) Seite 21
Approximate Weight:
Gewicht:
29 mg
29 mg
Mark:
Cathode
Kathode
Markierung:
ESD information:
LED is protected by ESD device which is
connected in parallel to LED-Chip.
ESD Information:
Die LED enthält ein ESD-Bauteil, das parallel zum
Chip geschaltet ist.
Corrosion robustness:
Test conditions: 40 °C / 90 % rh / 15 ppm H2S /
336 h
= Stricter than IEC 60068-2-43 (H2S) [25°C / 75 %
rh / 10 ppm H2S / 21 days]
= Regarding relevant gas (H2S) stricter than EN
60068-2-60 (method 4) [25 °C / 75 % rh / 200 ppb
SO2, 200 ppb NO2,10 ppb Cl2 / 21 days]
Korrosionsfestigkeit:
Test Kondition: 40°C / 90 % rh / 15 ppm H2S / 336
h
= Besser als IEC 60068-2-43 (H2S) [25°C / 75 %
rh / 10 ppm H2S / 21 Tage]
= Bezogen auf das Gas (H2S) besser als EN
60068-2-60 (method 4) [25°C / 75 % rh / 200ppb
SO2, 200ppb NO2,10ppb Cl2 / 21 Tage]
2018-02-23
11
Version 1.0
GD CSSRM2.14
Recommended Solder Pad 9) page 21
Empfohlenes Lötpaddesign 9) Seite 21
Reflow soldering
Reflow-Löten
solder resist
solder stencil
foot print
Cu area
2018-02-23
12
Version 1.0
GD CSSRM2.14
Note:
For superior solder joint connectivity results we
recommend soldering under standard nitrogen
atmosphere. For further information please refer
to our Application Note “Handling and Processing
Details for Ceramic LEDs“.
Anm.:
Um eine verbesserte Lötstellenkontaktierung zu
erreichen, empfehlen wir, unter Standard-
Stickstoffatmosphäre zu löten. Weitere
Informationen finden Sie in der Applikationsschrift
„Handling and Processing Details for Ceramic
LEDs“.
2018-02-23
13
Version 1.0
GD CSSRM2.14
Reflow Soldering Profile
Reflow-Lötprofil
Product complies to MSL Level 2 acc. to JEDEC J-STD-020E
OHA04525
300
˚C
T
250
T
245 ˚C
p
240 ˚C
tP
tL
217 ˚C
200
150
tS
100
50
25 ˚C
0
0
50
100
150
200
250
s
300
t
OHA04612
Pb-Free (SnAgCu) Assembly
Profile Feature
Profil-Charakteristik
Symbol
Symbol
Unit
Einheit
Minimum
Recommendation
Maximum
Ramp-up rate to preheat*)
25 °C to 150 °C
2
3
K/s
Time tS
TSmin to TSmax
tS
60
100
2
120
3
s
Ramp-up rate to peak*)
K/s
TSmax to TP
TL
tL
Liquidus temperature
217
80
°C
s
Time above liquidus temperature
Peak temperature
100
TP
tP
245
20
260
30
°C
s
Time within 5 °C of the specified peak
temperature TP - 5 K
10
3
6
K/s
s
Ramp-down rate*
TP to 100 °C
480
Time
25 °C to TP
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
2018-02-23
14
Version 1.0
GD CSSRM2.14
Taping 9) page 21
Gurtung 9) Seite 21
2018-02-23
15
Version 1.0
GD CSSRM2.14
Tape and Reel
Gurtverpackung
12 mm tape with 600 pcs. on ∅ 180 mm reel
W1
D0
P0
P2
Label
P1
Direction of unreeling
Direction of unreeling
W2
Leader: min0 4±± mm *
Trailer: min0 16± mm *
*) Dimensions acc0 to IEC 6±.86-3; EIA 481-D
OHAY0324
Tape dimensions [mm]
Gurtmaße [mm]
Tape dimensions in mm
W
E
F
P0
P1
P2
2 ± 0.05
D0
12 + 0.3 / - 0.1 4 ± 0.1
4 ± 0.1
or
8 ± 0.1
1.5 ± 0.1
1.75 ± 0.1
5.5 ± 0.05
Reel dimensions [mm]
Rollenmaße [mm]
Reel dimensions in mm
A
W
Nmin
60
W1
W2max
18.4
180
12
12.4 + 2
2018-02-23
16
Version 1.0
GD CSSRM2.14
Barcode-Product-Label (BPL)
Barcode-Produkt-Etikett (BPL)
Dry Packing Process and Materials
Trockenverpackung und Materialien
Moisture-sensitive label or print
Barcode label
OSRAM
Humidity indicator
Barcode label
D o n o t e a t .
A v o i d m e t a l c o n t a c t .
D i s c a r d i f c i r c l e s o v e r r u n .
b a g o p e n i n g .
P l e a s e c h e c k t h e H I C i m m i d i a t e l y a f t e r
c h e c k d o t
C o m p a r a t o r
W E T
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 5 %
I f w e t ,
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 0 %
I f w e t ,
c h a n g e d e s i c c a n t
p a r t s s t i l l a d e q a t e l y d r y .
I f w e t ,
u
5 %
M I L - I - 8 8 3 5
H u m i d i t y I n d i c a t o r
OSRAM
Desiccant
OHA00539
Note:
Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry
Pack”. Here you will also find the normative references like JEDEC.
Anm.:
Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte.
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung”
unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
2018-02-23
17
Version 1.0
GD CSSRM2.14
Transportation Packing and Materials
Kartonverpackung und Materialien
Barcode label
Barcode label
Bin1: P-1-20
Bin2: Q-1-20
Bin3:
Temp ST
220
240 C R
260
C
R
DEMY
R18
ML
2
C
RT
LSY T676
Multi T
2a
3
Additional TEXT
R077
PACKVAR:
P-1+Q-1
(G) GROUP:
0144
(9D) D/C:
210021998
2000
OSRAM Opto
Semiconductors
(Q)QTY:
123GH1234
(6P) BATCH NO:
5
2
4
1
0
0
1
(1T) LOT NO:
1
(X) PROD NO:
Bin1: P-1-20
Bin2: Q-1-20
Bin3:
Temp ST
220
240
260
C
R
C
DEMY
R18
ML
R
C RT
2
LSY T676
2a
3
Additional TEXT
R077
PACKVAR:
Multi TOP
P-1+Q-1
(G) GROUP:
0144
(9D) D/C:
210021998
2000
OSRAM Opto
Semiconductors
(Q)QTY:
123GH1234
(6P) BATCH NO:
5
2
4
1
0
0
1
(1T) LOT NO:
1
OSRAM
(X) PROD NO:
Packing
Sealing label
OHA02044
Dimensions of transportation box in mm
Width
Breite
195 ± 5
Length
Länge
195 ± 5
Height
Höhe
30 ± 5
2018-02-23
18
Version 1.0
GD CSSRM2.14
Notes
Hinweise
The evaluation of eye safety occurs according to the
standard IEC 62471:2008 ("photobiological safety of
lamps and lamp systems"). Within the risk grouping
system of this CIE standard, the LED specified in this
data sheet fall into the class Moderate risk (exposure
time 0.25 s). Under real circumstances (for exposure
time, eye pupils, observation distance), it is assumed
that no endangerment to the eye exists from these
devices. As a matter of principle, however, it should
be mentioned that intense light sources have a high
secondary exposure potential due to their blinding
effect. As is also true when viewing other bright light
sources (e.g. spotlights), temporary reduction in
visual acuity and afterimages can occur, leading to
irritation, annoyance, visual impairment, and even
accidents, depending on the situation.
Die Bewertung der Augensicherheit erfolgt nach
dem Standard IEC 62471:2008 ("photobiological
safety of lamps and lamp systems"). Im
Risikogruppensystem dieser CIE- Norm erfüllen die
in diesem Datenblatt angegebenen LEDs folgende
Gruppenanforderung - Moderate risk
(Expositionsdauer 0,25 s). Unter realen Umständen
(für Expositionsdauer, Augenpupille,
Betrachtungsabstand) geht damit von diesen
Bauelementen keinerlei Augengefährdung aus.
Grundsätzlich sollte jedoch erwähnt werden, dass
intensive Lichtquellen durch ihre Blendwirkung ein
hohes sekundäres Gefahrenpotenzial besitzen.
Nach einem Blick in eine helle Lichtquelle (z.B.
Spotlights), kann ein temporär eingeschränktes
Sehvermögen oder auch Nachbilder zu Irritationen,
Belästigungen, Beeinträchtigungen oder sogar
Unfällen führen.
Subcomponents of this LED contain, among other
substances, goldplated and Ag-filled materials. In
spite of the improved corrosion stability of this LED, it
can be affected by environments that contain very
high concentrations of aggressive substances.
Therefore, we recommend avoiding aggressive
atmospheres during storage, production and use.
Einzelkomponenten dieser LED enthalten u.a.
goldbeschichtete und Ag-gefüllte Materialien. Trotz
der verbesserten Korrosionsstabilität dieser LED
können Einzelkomponenten durch sehr hohe
Konzentration aggressiver Substanzen angegriffen
werden. Aus diesem Grund wird empfohlen,
aggressive Umgebungen während der Lagerung,
Produktion und im Betrieb zu vermeiden.
This LED is designed for specific/recommended
applications only. Please consult OSRAM Opto
Semiconductors Sales Staff in advance for detailed
information on other non-recommended applications
(e.g. automotive)
Die LED ist ausschließlich für spezifisch empfohlene
Anwendungen konzipiert. Bitte kontaktieren Sie das
OSRAM Opto Semiconductors Vertriebspersonal für
detailierte Informationen über nicht empfohlene
Anwendungsbereiche (z.B. Automobilbereich). oder
besuchen Sie
OR
Please visit www.osram-os.com/appnotes.
Change management for this component is aligned
with the requirements of the lighting market.
www.osram-os.com/appnotes
Das Änderungsmanagement dieses Bauteils ist an
den Anforderungen des Lichtmarktes ausgerichtet.
2018-02-23
19
Version 1.0
GD CSSRM2.14
Disclaimer
Disclaimer
Language english will prevail in case of any
discrepancies or deviations between the two language
wordings.
Bei abweichenden Angaben im zweisprachigen
Wortlaut haben die Angaben in englischer Sprache
Vorrang.
Attention please!
Bitte beachten!
The information describes the type of component and
shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
Due to technical requirements components may
contain dangerous substances.
Lieferbedingungen und Änderungen im Design
vorbehalten. Aufgrund technischer Anforderungen
können die Bauteile Gefahrstoffe enthalten. Für weitere
Informationen zu gewünschten Bauteilen, wenden Sie
sich bitte an unseren Vertrieb. Falls Sie dieses
Datenblatt ausgedruckt oder heruntergeladen haben,
finden Sie die aktuellste Version im Internet.
Verpackung
For information on the types in question please contact
our Sales Organization.
If printed or downloaded, please find the latest version
in the Internet.
Benutzen
Sie
bitte
die
Ihnen
bekannten
Packing
Recyclingwege. Wenn diese nicht bekannt sein sollten,
wenden Sie sich bitte an das nächstgelegene
Vertriebsbüro. Wir nehmen das Verpackungsmaterial
zurück, falls dies vereinbart wurde und das Material
sortiert ist. Sie tragen die Transportkosten. Für
Please use the recycling operators known to you. We
can also help you – get in touch with your nearest sales
office.
By agreement we will take packing material back, if it is
sorted. You must bear the costs of transport. For
packing material that is returned to us unsorted or which
we are not obliged to accept, we shall have to invoice
you for any costs incurred.
Verpackungsmaterial,
das
unsortiert
an uns
zurückgeschickt wird oder das wir nicht annehmen
müssen, stellen wir Ihnen die anfallenden Kosten in
Rechnung.
Components used in life-support devices or
systems must be expressly authorized for such
purpose!
Critical components* may only be used in life-support
devices** or systems with the express written approval
of OSRAM OS.
Bauteile, die in lebenserhaltenden Apparaten und
Systemen eingesetzt werden, müssen für diese
Zwecke ausdrücklich zugelassen sein!
Kritische Bauteile* dürfen in lebenserhaltenden
Apparaten und Systemen** nur dann eingesetzt
werden, wenn ein schriftliches Einverständnis von
OSRAM OS vorliegt.
*) A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or
the effectiveness of that device or system.
**) Life support devices or systems are intended (a) to
be implanted in the human body, or (b) to support
and/or maintain and sustain human life. If they fail, it is
reasonable to assume that the health and the life of the
user may be endangered.
*) Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden
Apparaten
oder
Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
einer
Fehlfunktion
dieses
lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
**) Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper oder
(b) für die Lebenserhaltung bestimmt. Falls Sie
versagen, kann davon ausgegangen werden, dass die
Gesundheit und das Leben des Patienten in Gefahr ist.
2018-02-23
20
Version 1.0
GD CSSRM2.14
Glossary
Reverse Voltage: Not
operation. Continuous reverse voltage can cause
migration and LED damage.
Glossar
Sperrspannung: Die
1)
1)
designed
for
reverse
LED
kann
nicht
in
Sperrrichtung betrieben werden. Kontinuierlicher
Rückwärtsbetrieb kann Migration und eine
Beschädigung der LED zur Folge haben.
2)
2)
Reverse Operation: A minimum of 10 hours of
reverse operation is permisable in total.
Betrieb in Sperrrichtung: Eine Gesamtbetriebszeit
von wenigstens 10 Stunden in Sperrrichtung ist
gewährleistet.
3)
4)
3)
4)
Brightness: Brightness values are measured during
a current pulse of typically 10 ms, with a tolerance of
+/- 7%.
Helligkeit: Helligkeitswerte werden während eines
Strompulses mit einer typischen Dauer von 10 ms,
mit einer Genauigkeit von ± 7% ermittelt.
Typical Values: Due to the special conditions of the
manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can
only reflect statistical figures. These do not
necessarily correspond to the actual parameters of
each single product, which could differ from the
typical data and calculated correlations or the typical
characteristic line. If requested, e.g. because of
technical improvements, these typ. data will be
changed without any further notice.
Typische Werte: Wegen
der
besonderen
Prozessbedingungen bei der Herstellung von LED
können typische oder abgeleitete technische
Parameter nur aufgrund statistischer Werte
wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
und abgeleiteten Werten oder typischen Kennlinien
unterscheiden können. Falls erforderlich, z.B.
aufgrund technischer Verbesserungen, werden
diese typischen Werte ohne weitere Ankündigung
geändert.
5)
6)
5)
6)
Wavelength: The wavelength is measured at a
current pulse of typically 10 ms, with a tolerance of ±
0.5 nm.
Wellenlänge: Die Wellenläge wird während eines
Strompulses einer typischen Dauer von 10 ms, mit
einer Genauigkeit von ± 0.5 nm gemessen.
Characteristic curve: In the range where the line of
the graph is broken, you must expect higher
differences between single LEDs within one packing
unit.
Kennlinien: Im gestrichelten Bereich der Kennlinien
muss mit erhöhten Abweichungen zwischen
Leuchtdioden innerhalb einer Verpackungseinheit
gerechnet werden.
7)
7)
Tolerance of Measure: Unless otherwise noted in
drawing, tolerances are specified with ±0.1 and
dimensions are specified in mm.
Maßtoleranz: Wenn in der Zeichnung nicht anders
angegeben, gilt eine Toleranz von ±0,1. Maße
werden in mm angegeben.
2018-02-23
21
Version 1.0
GD CSSRM2.14
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.
2018-02-23
22
相关型号:
©2020 ICPDF网 联系我们和版权申明