LA-VH9F [OSRAM]
SMT package, standard SMT footprint 0402, colorless diffused resin;型号: | LA-VH9F |
厂家: | OSRAM GMBH |
描述: | SMT package, standard SMT footprint 0402, colorless diffused resin |
文件: | 总21页 (文件大小:363K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2013-07-18
FIREFLY
Datasheet
Version 1.2
LA VH9F
The FIREFLY is designed for use in consumer
applications. Due to its low height and optical
characteristics it is optimized for flat indirect
backlighting of switches.
Die FIREFLY wurde für den Einsatz in Consumer
Anwendungen entwickelt. Aufgrund ihrer geringen
Bauteilhöhe und optischen Eigenschaften ist sie
optimiert für flache indirekte Hinterleuchtung von
Schaltern.
Features:
Besondere Merkmale:
•
Package: SMT package, standard SMT footprint
0402, colorless diffused resin
•
Gehäusetyp: SMT Gehäuse, standard SMT
footprint 0402, farbloser diffuser Verguss
Technologie: InGaAlP Thinfilm
Abstrahlwinkel bei 50 % IV: 140° (horizontal);
165° (vertical)
•
•
Technology: InGaAlP Thinfilm
Viewing angle at 50 % IV: 140° (horizontal); 165°
(vertical)
•
•
•
•
Color: amber (615 nm)
•
•
Farbe: amber (615 nm)
Optical efficiency (typ.): 43 lm/W (amber)
Optischer Wirkungsgrad (typ.): 43 lm/W
(amber)
Applications
Anwendungen
•
•
•
Backlighting
•
•
•
Hinterleuchtung
Toys
Spielsachen
Signal- und Symbolleuchten
Signal and Symbol Luminary
2013-07-18
1
Version 1.2
LA VH9F
Ordering Information
Bestellinformation
Type:
Luminous Intensity
Ordering Code
Bestellnummer
1) page 20
Typ:
Lichtstärke 1) Seite 20
IF = 5 mA
IV [mcd]
LA VH9F-Q1R2-24
71 ... 180
Q65110A8082
Note:
The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each
packing unit (there will be no mixing of two groups on each packing unit). E. g. LA VH9F-Q1R2-24 means that only one group Q1, Q2, R1, R2 will be
shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one packing unit.
E. g. LA VH9F-Q1R2-24 means that only one wavelength group 2,3,4 will be shippable. LA VH9F-Q1R2-24 means that the device will be shipped within
the specified limits as stated on page 5In order to ensure availability, single wavelength groups will not be orderable (see page 5).
Anm.:
Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es
wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LA VH9F-Q1R2-24 bedeutet, dass in einer Verpackungseinheit nur eine
der Helligkeitsgruppen Q1, Q2, R1, R2 enhalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt
werden.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine
Wellenlängengruppe geliefert. Z. B. LA VH9F-Q1R2-24 bedeutet, dass in einer Verpackungseinheit nur eine der Wellenlängengruppen 2,3,4 enthalten
ist (siehe Seite 5). LA VH9F-Q1R2-24 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu
gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
2013-07-18
2
Version 1.2
LA VH9F
Maximum Ratings
Grenzwerte
Parameter
Symbol
Symbol
Top
Values
Werte
Unit
Einheit
°C
Bezeichnung
Operating temperature range
Betriebstemperatur
-40 ... 85
Storage temperature range
Lagertemperatur
Tstg
Tj
-40 ... 85
95
°C
Junction temperature
Sperrschichttemperatur
°C
Forward current
Durchlassstrom
(TS = 25 °C)
IF
15
mA
Surge current
IFM
100
5
mA
V
Stoßstrom
(t <= 10 ǹs; D = 0.005; TS = 25 °C)
Reverse voltage 2) page 20
Sperrspannung 2) Seite 20
(TS = 25 °C)
VR
ESD withstand voltage
VESD
up to 2
kV
ESD Festigkeit
(acc. to ANSI/ESDA/JEDEC JS-001 - HBM)
2013-07-18
3
Version 1.2
LA VH9F
Characteristics (TS = 25 °C; IF = 5 mA)
Kennwerte
Parameter
Symbol
Symbol
Ǹpeak
Values
Werte
624
Unit
Bezeichnung
Einheit
nm
Wavelength at peak emission
(typ.)
Wellenlänge d. emittierten Lichtes
Dominant Wavelength 3) page 20
(min.)
(typ.)
(max.)
Ǹdom
Ǹdom
Ǹdom
612
615
624
nm
nm
nm
Dominantwellenlänge 3) Seite 20
Spectral bandwidth at 50% Irel max
Spektrale Bandbreite b. 50% Irel max
(typ.)
ǎǸ
25
nm
Viewing angle at 50 % IV
Abstrahlwinkel bei 50 % IV
(typ.)
2Ȅ
140 (horizontal)
165 (vertical)
°
Forward voltage 4) page 20
(min.)
(typ.)
(max.)
VF
VF
VF
1.80
2.00
2.40
V
V
V
Durchlassspannung 4) Seite 20
Reverse current
Sperrstrom
(VR = 5 V)
(typ.)
(max.)
IR
IR
0.01
10
ǹA
μA
Real thermal resistance junction / ambient
(max.)
(max.)
Rth JA real
650
K/W
5) page 20 , 6) page 20
Realer Wärmewiderstand Sperrschicht /
Umgebung 5) Seite 20 , 6) Seite 20
Real thermal resistance junction / solder point
Rth JS real
430
K/W
6) page 20
Realer Wärmewiderstand Sperrschicht / Lötpad
6) Seite 20
2013-07-18
4
Version 1.2
LA VH9F
Brightness Groups
Helligkeitsgruppen
Group
Luminous Intensity
Luminous Intensity
Luminous Flux 7) page 20
1) page 20
1) page 20
Gruppe
Lichtstärke 1) Seite 20
Lichtstärke 1) Seite 20
Lichtstrom 7) Seite 20
(min.) Iv [mcd]
(max.) Iv [mcd]
(typ.) ǠV [mlm]
Q1
Q2
R1
R2
71
90
240
300
380
480
90
112
140
180
112
140
Note:
Anm.:
The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups
of only a few brightness groups. Individual brightness groups cannot be ordered.
Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus
nur wenigen Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen sind nicht bestellbar.
Dominant Wavelength Groups 3) page 20
Dominant Wellenlängengruppen 3) Seite 20
Group
amber
(max.) Ǹdom
Gruppe
(min.) Ǹdom
[nm]
[nm]
616
620
624
2
3
4
612
616
620
Note:
Anm.:
No packing unit / tape ever contains more than one color group for each selection.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Farbe enthalten.
2013-07-18
5
Version 1.2
LA VH9F
Group Name on Label
Gruppenbezeichnung auf Etikett
Example: Q1-2
Beispiel: Q1-2
Brightness
Helligkeit
Wavelength
Wellenlänge
Q1
2
Note:
Anm.:
No packing unit / tape ever contains more than one group for each selection.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
2013-07-18
6
Version 1.2
LA VH9F
Relative Spectral Emission - V(Ǹ) = Standard eye response curve 7) page 20
Relative spektrale Emission - V(Ǹ) = spektrale Augenempfindlichkeit 7) Seite 20
Irel = f (Ǹ); TA = 25 °C; IF = 5 mA
OHL02738
100
%
Ιrel
80
Vλ
60
amber
red
40
20
0
400
450
500
550
600
650
nm
700
λ
Radiation Characteristics 7) page 20
Abstrahlcharakteristik 7) Seite 20
Irel = f (Ȅ); TA = 25 °C
2013-07-18
7
Version 1.2
LA VH9F
Forward Current 7) page 20
Relative Luminous Intensity 7) page 20 , 8) page 20
7) Seite 20
Durchlassstrom
Relative Lichtstärke 7) Seite 20 , 8) Seite 20
IF = f (VF); TA = 25 °C
IV/IV(5 mA) = f(IF); TA = 25 °C
OHL04088
OHL03954
102
5
mA
IV
V (5 mA)
IF
I
5
101
5
red
super-red
orange
amber
yellow
101
5
100
5
10-1
100
100
5
101
mA 102
1.5
1.7
1.9
2.1
2.3 V 2.5
IF
VF
2013-07-18
8
Version 1.2
LA VH9F
Relative Forward Voltage 7) page 20
Relative Vorwärtsspannung 7) Seite 20
ǎVF = VF - VF(25°C) = f(Tj); IF = 5 mA
OHL02667
0.25
V
ΔVF
0.15
0.1
0.05
0
-0.05
-0.1
-0.15
-0.2
-60 -40 -20
0
20 40 60 ˚C 100
Tj
2013-07-18
9
Version 1.2
LA VH9F
Max. Permissible Forward Current
Max. zulässiger Durchlassstrom
IF = f (T)
Permissible Pulse Handling Capability
Zulässige Impulsbelastbarkeit IF = f(tp)
D: Duty cycle, TA = 25 °C
Permissible Pulse Handling Capability
Zulässige Impulsbelastbarkeit IF = f(tp)
D: Duty cycle, TA = 85 °C
2013-07-18
10
Version 1.2
LA VH9F
Package Outline 9) page 20
Maßzeichnung 9) Seite 20
Approximate Weight:
Gewicht:
0.6 mg
0.6 mg
2013-07-18
11
Version 1.2
LA VH9F
Recommended Solder Pad 9) page 20
Empfohlenes Lötpaddesign 9) Seite 20
Reflow soldering
Reflow-Löten
2013-07-18
12
Version 1.2
LA VH9F
Reflow Soldering Profile
Reflow-Lötprofil
Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.01
OHA04525
300
˚C
T
250
T
245 ˚C
p
240 ˚C
tP
tL
217 ˚C
200
150
tS
100
50
25 ˚C
0
0
50
100
150
200
250
s
300
t
OHA04612
Pb-Free (SnAgCu) Assembly
Profile Feature
Profil-Charakteristik
Symbol
Symbol
Unit
Einheit
Minimum
Recommendation
Maximum
Ramp-up rate to preheat*)
2
3
K/s
25 °C to 150 °C
Time tS
TSmin to TSmax
Ramp-up rate to peak*)
tS
60
100
2
120
3
s
K/s
TSmax to TP
TL
tL
Liquidus temperature
217
80
°C
s
Time above liquidus temperature
Peak temperature
100
TP
tP
245
20
260
30
°C
s
Time within 5 °C of the specified peak
temperature TP - 5 K
10
3
6
K/s
s
Ramp-down rate*
TP to 100 °C
480
Time
25 °C to TP
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
2013-07-18
13
Version 1.2
LA VH9F
Method of Taping 9) page 20
Gurtung 9) Seite 20
2013-07-18
14
Version 1.2
LA VH9F
Tape and Reel
Gurtverpackung
8 mm tape with 4000 pcs. on ͌ 180 mm reel
W1
D0
P0
P2
Label
P1
Direction of unreeling
Direction of unreeling
W2
Leader: min. 400 mm *
Trailer: min. 160 mm *
*) Dimensions acc. to IEC 60286-3; EIA 481-D
OHAY0324
Tape dimensions in mm (inch)
Tape dimensions in mm (inch)
W
P0
P1
P2
D0
E
F
8 +0.3/-0.1
4 ± 0.1
(0.157 ±
0.004)
2 ± 0.05
(0.079 ±
0.002)
or
2 ± 0.05
(0.079 ±
0.002)
1.5 ± 0.1
(0.059 +
0.004)
1.75 ± 0.1
(0.069 ±
0.004)
3.5 ± 0.05
(0.217 ±
0.002)
4 ± 0.1
(0.157 ±
0.004)
Reel dimensions in mm (inch)
Reel dimensions in mm (inch)
A
W
8 (0.315)
Nmin
60 (2.362)
W1
W2max
14.4 (0.567)
180 (7)
8.4 + 2 (0.331 +
0.079)
2013-07-18
15
Version 1.2
LA VH9F
Barcode-Product-Label (BPL)
Barcode-Produkt-Etikett (BPL)
OSRAM Opto
BIN1: XX-XX-X-XXX-X
LX XXXX
Semiconductors
RoHS Compliant
(6P) BATCH NO: 1234567890
ML Temp ST
2
260 °C
R
(1T) LOT NO: 1234567890
(9D) D/C: 1234
Pack: R18
DEMY
022
B_R999_1880.1642 R
(X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X
OHA04563
Dry Packing Process and Materials
Trockenverpackung und Materialien
Moisture-sensitive label or print
Barcode label
M
A
R
S
O
Humidity indicator
Barcode label
D o n o t e a t .
A v o i d m e t a l c o n t a c t .
D i s c a r d i f c i r c l e s o v e r r u n .
b a g o p e n i n g .
P l e a s e c h e c k t h e H I C i m m i d i a t e l y a f t e r
c h e c k d o t
C o m p a r a t o r
W E T
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 5 %
I f w e t ,
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 0 %
I f w e t ,
c h a n g e d e s i c c a n t
p a r t s s t i l l a d e q u a t e l y d r y .
I f w e t ,
5
%
M I L - I - 8 8 3 5
H u m i d i t y I n d i c a t o r
M
RA
S
O
Desiccant
OHA00539
Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in
chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references
like JEDEC.
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem
Trockenmittel und einer Feuchteindikatorkarte.
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form
Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind
Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
2013-07-18
16
Version 1.2
LA VH9F
Transportation Packing and Materials
Kartonverpackung und Materialien
Barcode label
Barcode label
20
-2
-1
0
-
1-
1
:
P
Q
T
S
R
in
2:
B
in
p
m
B
3:
in
C
Y
EM
e
R
T
76
T
SY PL
B
T
2
0
C
R
6
D
L
M
2
0
X
D
E
24
0
C
2
2
6
l
T
E
na
tio
di
8
1
L
O
T
2a
3
: R
R
-1
i
d
lt
A
A
V
u
0
77
M
R
C
K
: P-1+Q
P
U
A
P
O
R
G
)
(G
44
: 01
8
9
9
to
to
s
p
c
du
r
/C
)
D
D
O
21
0
M
co
(9
A
i
n
: 210
00
20
R
em
4
S
S
NO
23
:
O
H
TY
)Q
(Q
TC
H1
A
)
B
23G
P
: 1
(6
O
2
5
N
T
O
4
1
L
0
T
)
1
0
(1
1
:
O
N
D
O
R
P
)
(X
0
0
-2
-1
1
:
P
-
1
-
2
Bin
Bin2: Q
Bin
3:
R
6
7
Temp ST
220
240
2
60 C
C
R
T
R
6
D
C
DEMY
T
E
ML
Y
L
2
S
P
8
1
L
O
2a
T
3
itional TEXT
077
R
-
1
Q
i
l
t
Add
R
u
-
1+
P
M
ACKVAR:
P
)
GROUP:
(G
4
4
1
0
to
o
p
r
s
O
D/C:
ct
M
RAco
em
du
(9D)
n
: 210021998
00
0
2
4
S
S
i
NO
23
1
H
O
CH
G
(Q)QTY:
3
2
(
6
P
)
B
A
T
1
AM
SR
NO:
2
4
T
5
L
O
1
0
0
1
(1T)
1
O
(X) PROD NO:
Packing
Sealing label
OHA02044
Dimensions of transportation box in mm (inch):
Width / Breite
Length / Länge
Height / Höhe
30 ± 5 (1.181 ± 0.196)
200 ± 5 (7.874 ± 0.196)
195 ± 5 (7.677 ± 0.1968)
2013-07-18
17
Version 1.2
LA VH9F
Notes
Hinweise
The evaluation of eye safety occurs according to the
standard IEC 62471:2008 ("photobiological safety of
lamps and lamp systems"). Within the risk grouping
system of this CIE standard, the LED specified in this
data sheet fall into the class Exempt group
(exposure time 10000 s). Under real circumstances
(for exposure time, eye pupils, observation
Die Bewertung der Augensicherheit erfolgt nach
dem Standard IEC 62471:2008 ("photobiological
safety of lamps and lamp systems"). Im
Risikogruppensystem dieser CIE- Norm erfüllen die
in diesem Datenblatt angegebenen LEDs folgende
Gruppenanforderung - Exempt group
(Expositionsdauer 10000 s). Unter realen
distance), it is assumed that no endangerment to the
eye exists from these devices. As a matter of
principle, however, it should be mentioned that
intense light sources have a high secondary
exposure potential due to their blinding effect. As is
also true when viewing other bright light sources
(e.g. headlights), temporary reduction in visual
acuity and afterimages can occur, leading to
irritation, annoyance, visual impairment, and even
accidents, depending on the situation.
Umständen (für Expositionsdauer, Augenpupille,
Betrachtungsabstand) geht damit von diesen
Bauelementen keinerlei Augengefährdung aus.
Grundsätzlich sollte jedoch erwähnt werden, dass
intensive Lichtquellen durch ihre Blendwirkung ein
hohes sekundäres Gefahrenpotenzial besitzen.
Nach einem Blick in eine helle Lichtquelle (z.B.
Autoscheinwerfer), kann ein temporär
eingeschränktes Sehvermögen oder auch
Nachbilder zu Irritationen, Belästigungen,
Beeinträchtigungen oder sogar Unfällen führen.
This LED contains metal materials. Corroded metal
may lead to a worsening of the optical performance
of the LED and can in the worst case lead to a failure
of the LED. Do not expose this LED to aggressive
atmospheres. Note, that corrosive gases may as
well be emitted from materials close to the LED in the
final product.
Diese LED enthält teilweise metallische
Bestandteile. Korrodiertes Metall kann zu einer
Verschlechterung der optischen Eigenschaften und
im schlimmsten Fall zum Ausfall der LED führen.
Diese LED darf aggressiven Bedingungen nicht
ausgesetzt werden. Es ist zu beachten, dass
korrosive Gase auch von Materialien emittiert
werden können, die sich im Endprodukt in
unmittelbarer Umgebung der LED befinden.
2013-07-18
18
Version 1.2
LA VH9F
Date of Change: 2012-06-15
Revision Date: 2013-07-18
Version Subjects
Date of change
2012-03-16
1.1
1.2
OS-IN-2012-005
OS-IN-2012-017
2012-06-15
Disclaimer
Disclaimer
Attention please!
Bitte beachten!
The information describes the type of component and
shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
Due to technical requirements components may contain
dangerous substances.
Lieferbedingungen und Änderungen im Design
vorbehalten. Aufgrund technischer Anforderungen
können die Bauteile Gefahrstoffe enthalten. Für weitere
Informationen zu gewünschten Bauteilen, wenden Sie
sich bitte an unseren Vertrieb. Falls Sie dieses
Datenblatt ausgedruckt oder heruntergeladen haben,
finden Sie die aktuellste Version im Internet.
For information on the types in question please contact
our Sales Organization.
If printed or downloaded, please find the latest version in
the Internet.
Verpackung
Benutzen Sie bitte die Ihnen bekannten Recyclingwege.
Wenn diese nicht bekannt sein sollten, wenden Sie sich
bitte an das nächstgelegene Vertriebsbüro. Wir nehmen
das Verpackungsmaterial zurück, falls dies vereinbart
wurde und das Material sortiert ist. Sie tragen die
Transportkosten. Für Verpackungsmaterial, das
unsortiert an uns zurückgeschickt wird oder das wir nicht
annehmen müssen, stellen wir Ihnen die anfallenden
Kosten in Rechnung.
Packing
Please use the recycling operators known to you. We
can also help you – get in touch with your nearest sales
office.
By agreement we will take packing material back, if it is
sorted. You must bear the costs of transport. For
packing material that is returned to us unsorted or which
we are not obliged to accept, we shall have to invoice
you for any costs incurred.
Bauteile, die in lebenserhaltenden Apparaten und
Systemen eingesetzt werden, müssen für diese
Zwecke ausdrücklich zugelassen sein!
Components used in life-support devices or
systems must be expressly authorized for such
purpose!
Kritische Bauteile* dürfen in lebenserhaltenden
Apparaten und Systemen** nur dann eingesetzt
werden, wenn ein schriftliches Einverständnis von
OSRAM OS vorliegt.
Critical components* may only be used in life-support
devices** or systems with the express written approval
of OSRAM OS.
*)
A
critical component is a component used in
a
*) Ein kritisches Bauteil ist ein Bauteil, das in
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or the
effectiveness of that device or system.
lebenserhaltenden
Apparaten
oder
Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
einer Fehlfunktion dieses lebenserhaltenden Apparates
oder Systems führen wird oder die Sicherheit oder
**) Life support devices or systems are intended (a) to be
implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is
reasonable to assume that the health and the life of the
user may be endangered.
Effektivität
dieses
Apparates
oder
Systems
beeinträchtigt.
**) Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper oder
(b) für die Lebenserhaltung bestimmt. Falls Sie
versagen, kann davon ausgegangen werden, dass die
Gesundheit und das Leben des Patienten in Gefahr ist.
2013-07-18
19
Version 1.2
LA VH9F
Glossary
Glossar
1)
1)
Brightness: Brightness groups are tested at
a
Helligkeit: Helligkeitswerte werden mit einer
Stromeinprägedauer von 25 ms und einer
Genauigkeit von ± 11% ermittelt.
current pulse duration of 25 ms and a tolerance of
± 11%.
2)
3)
2)
3)
Reverse Voltage: Driving the LED in reverse
Sperrspannung: Die LED kann kurzzeitig in
direction is suitable for short term application.
Sperrrichtung betrieben werden.
Wavelength: Wavelengths are tested at a current
Wellenlänge: Wellenlängen werden mit einer
Stromeinprägedauer von 25 ms und einer
Genauigkeit von ±1 nm ermittelt.
pulse duration of 25 ms and a tolerance of ±1 nm.
4)
4)
Forward Voltage: Forward voltages are tested at a
current pulse duration of 1 ms and a tolerance of ±
0.1 V.
Durchlassspannung: Spannungswerte werden mit
einer Stromeinprägedauer von 1 ms und einer
Genauigkeit von ± 0,1 V ermittelt.
5)
6)
7)
5)
6)
7)
Thermal Resistance: RthJA results from mounting
Wärmewiderstand: RthJA ergibt sich bei Montage
on PC board FR 4 (pad size 16mm² per pad)
auf PC-Board FR 4 (Padgröße 16mm² je pad)
Thermal Resistance: Rth max is based on statistic
values (6Ȁ).
Wärmewiderstand: Rth
statistischen Werten (6Ȁ).
max
basiert
auf
Typical Values: Due to the special conditions of the
manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can
only reflect statistical figures. These do not
necessarily correspond to the actual parameters of
each single product, which could differ from the
typical data and calculated correlations or the typical
characteristic line. If requested, e.g. because of
technical improvements, these typ. data will be
changed without any further notice.
Typische Werte: Wegen
der
besonderen
Prozessbedingungen bei der Herstellung von LED
können typische oder abgeleitete technische
Parameter nur aufgrund statistischer Werte
wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
und abgeleiteten Werten oder typischen Kennlinien
unterscheiden können. Falls erforderlich, z.B.
aufgrund technischer Verbesserungen, werden
diese typischen Werte ohne weitere Ankündigung
geändert.
8)
9)
8)
9)
Relative Brightness Curve: In the range where the
line of the graph is broken, you must expect higher
brightness differences between single LEDs within
one packing unit.
Relative Helligkeitskurve: Im
gestrichelten
Bereich der Kennlinien muss mit erhöhten
Helligkeitsunterschieden zwischen Leuchtdioden
innerhalb einer Verpackungseinheit gerechnet
werden.
Tolerance of Measure: Dimensions are specified
Maßtoleranz: Maße
werden
wie
folgt
as follows: mm (inch).
angegeben: mm (inch).
2013-07-18
20
Version 1.2
LA VH9F
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.
2013-07-18
21
相关型号:
©2020 ICPDF网 联系我们和版权申明