LF05E2 [OSRAM]
LINEARLIGHT FLEX ECO;
| 型号： | LF05E2 |
| 厂家： | 
OSRAM GMBH |
| 描述： | LINEARLIGHT FLEX ECO |
| 文件： | 总6页 (文件大小：482K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
www.osram.com/flex
LINEARLIGHT FLEX ECO
LF05E2
TECHNICAL DATASHEET
Key Features & Benefits
‒
‒
‒
Decorative linear separable LED strip on flexible
printed circuit board with self-adhesive back
High quality single PCB from continuous reel-to-reel
production for improved reliability
Current control technology for constant flux level
along the module
‒
‒
Fine white binning (3 steps MacAdam ellipse)
PWM Dimmable
Possible Applications
‒
Architectural lighting / integration
Coves, hand rails, walls, edge coupling, et.al.
Object lighting / integration
‒
‒
Signage application
QUICK REFERENCE
Product
Order Code
Color
white
white
white
white
white
white
K
V
W/m lm/m lm/W Beam Angle (°)
Shipping Units
LF05E2-W2F-824
LF05E2-W2F-827
LF05E2-W2F-830
LF05E2-W2F-840
LF05E2-W2F-865
LF05E2-W2F-824
4052899942790
4008321971357
4052899928435
4052899928442
4008321971418
4052899942790
2400
2700
3000
4000
6500
2400
24
24
24
24
24
24
3.0
3.6
3.6
3.6
3.6
3.0
220
205
220
240
220
220
73
57
61
67
61
73
120
120
120
120
120
120
8
8
8
8
8
8
Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not
necessarily correspond to the actual parameters of each single product which could differ from the typical data.
Subject to change without notice. Errors and omissions excepted.
Version: 2016-04-07
01
LINEARLIGHT FLEX ECO | LF05E2 | TECHNICAL DATASHEET
TECHNICAL OPERATING DATA FOR COMPLETE REEL
Product
Order Code
Power [W]
30.0
Current [A]
Luminous Flux [lm] Module Length [m]
4052899942790
4008321971357
4052899928435
4052899928442
4008321971418
4052899942790
1.3
1.5
1.5
1.5
1.5
1.3
2,200
2,050
2,200
2,400
2,200
2,200
10
10
10
10
10
10
LF05E2-W2F-824
LF05E2-W2F-827
LF05E2-W2F-830
LF05E2-W2F-840
LF05E2-W2F-865
36.0
36.0
36.0
36.0
30.0
LF05E2-W2F-824
Technical Specifications
GENERAL
Dimmable
Pulse width modulation (PWM)
Binning
Fine white (3 step MacAdam ellipse)
50,000 h (L70B50, Tc max)
3M F 9460
Lifetime
Adhesive tape on backside
Complementary systems
Certifications
CONNECTsystem, SLIMCONNECTsystem, SLIM TRACK, OPTOTRONIC
CE, UL8750 recognized, UL2108 listed, EAC, RoHS compliant
OPERATING CONDITIONS
Operating temperature at Tc-Point [°C] -20 – 75
Storage temperature [°C]
Voltage range [V dc]
-20 – 75
23 – 25
25
Reverse Voltage [V dc]
‒
‒
‒
Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED Module.
Exceeding maximum ratings for operating voltage will cause hazardous overload and will likely destroy the LED Module.
The temperature of the LED module must be measured at the Tc-point according to EN60598-1 in a thermally constant status with a
temperature sensor or a temperature sensitive label. For exact location of the Tc-point see drawing below.
Technical Drawings
Tc
Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not
necessarily correspond to the actual parameters of each single product which could differ from the typical data.
Subject to change without notice. Errors and omissions excepted.
Version: 2016-04-07
02
LINEARLIGHT FLEX ECO | LF05E2 | TECHNICAL DATASHEET
Safety information
‒
‒
‒
The LED module itself and all its components must not be mechanically stressed.
Assembly must not damage or destroy conducting paths on the circuit board.
Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical
and safety standards. Only qualified personnel should be allowed to perform installations.
Observe correct polarity!
Depending on the product incorrect polarity will lead to emission of red or no light. The module can be
destroyed! Correct polarity immediately!
Parallel connection is highly recommended as safe electrical operation mode. Serial connection is not
recommended. Unbalanced voltage drop can cause hazardous overload and damage the LED module.
Please ensure that the power supply is of adequate power to operate the total load.
When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation at
soldering points between module and the mounting surface.
‒
‒
‒
‒
‒
‒
‒
The maximum length of LF05E2 is 10m with power feed at one end.
Pay attention to standard ESD precautions when installing the module.
The module, as manufactured, has no conformal coating and therefore offers no inherent protection against
corrosion. The ability to customize the length of the module by cutting at specifically marked points is a key
feature of the product and hence the reason for no factory installed conformal coating. For these reasons, it
is recommended that the user complete all module modifications first (cutting wiring) and then apply a
conformal coating in the final stages of installation.
‒
‒
Damage by corrosion will not be honored as a materials defect claim. It is the user´s responsibility to provide
suitable protection again corrosive agents such as moisture and condensation and other harmful elements.
For applications involving exposure to humidity and dust the module must be protected by a fixture or
housing with a suitable protection class. The module can be protected against condensation water by
treatment with an appropriate circuit board grade conformal coating. The conformal coating should have the
following features:
o
o
o
o
o
Optical transparency
UV-resistance
Thermal expansion matching the thermal expansion of the module
Low permeability of steam for all climatic conditions
Resistance against corrosive environment.
In order to drive OSRAM LED-Modules safely, it is absolutely necessary to operate them with an electronically stabilized power supply protecting against
short circuits, overload and overheating. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry
the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC 6134 7-2-13, EN 55015, IEC
61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please
see the relevant brochure for more detailed information (see "Related and Further Information") OSRAM OPTOTRONIC® control gear complies with all
relevant standards and guarantees safe operation.
Assembly Information
‒
‒
‒
Connection with soldering wires on unmounted module:
Do not pre-tin the solder-pads but pre-tin the wires and solder for max 4s at 300°C.
Allow solder-points to completely cool down before the next soldering.
Prevent shear- or peel forces.
Soldering of wires with the module mounted on a heatsink:
Pre-tin solder-pads and wires and solder for max 3 s at 350 °C.
Allow solder-points to completely cool down before the next soldering.
Prevent shear- or peel forces.
The smallest unit (100 mm – 5 LEDs) can be removed by cutting with scissors between the designated solder
pads.
‒
‒
Mounting of the module is facilitated by the double-sided adhesive tape on the back-surface of the module.
Mounting surface must be clean and dry, free of oils or silicone coatings as well as dirt particle.
Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not
necessarily correspond to the actual parameters of each single product which could differ from the typical data.
Subject to change without notice. Errors and omissions excepted.
Version: 2016-04-07
03
LINEARLIGHT FLEX ECO | LF05E2 | TECHNICAL DATASHEET
‒
The mounting substrate must have sufficient structural integrity. Take care to completely remove the
protective backing. Once the module is appropriately positioned, pre on the module with about 20N/cm² (refer
to application techniques of 3M adhesive transfer tapes). In difficult cases the use of a prime may help.
Maximum temperature ratings must be kept. Therefore the module may have to be mounted on a metal heat
sink, depending on the individual installation.
The minimum bending radius is 2 cm. The module may be bent over a smaller radius but only in regions of
the circuit board containing electronic components and such bends should be made once and fixed in
position to avoid cyclic fatigue.
‒
‒
‒
‒
Bending is only allowed within the bending axis of the PCB. Bending outside of that leads to torsion which
may cause damage to the module and will lead to failure.
When installing in environments with large variations in temperature (e.g. outdoor applications) and operating
length of more than 2 m, the use of adequate mounting surfaces is necessary. Otherwise it is advisable to
use an additional thicker adhesive tape to absorb the stress of any mismatch in expansion.
Complementary Systems & Accessories
SLIMCONNECT SYSTEM
Description
Product name
Order Code
Shipping details
2pin Feeder
LF-2PIN Flex SC
4008321832436
4008321832467
4008321875587
4008321875563
10 / 250
25 / 250
Jumper (board-to-board)
Extension wire 30mm
Extension wire 150mm
LF-CONN Flex SC
LF-WIRE-30 FLEX SC
LF-WIRE-150 FLEX SC
100 / 10,000
50 / 5,000
CONNECT SYSTEM
Description
Product name
Order Code
Shipping details
2pin Feeder
LF-2PIN FLEX
4008321955326
4008321955333
4008321955340
10 / 100
10 / 200
10 / 100
Jumper (10mm extension)
Jumper (150mm extension)
LF-CONN-10 FLEX
LF-CONN-150 FLEX
SLIMTRACK SYSTEM
Description
Product name
Order Code
Shipping details
SLIM TRACK
LF-LTS-2100 SLIM TRACK
LF-LTS-MB
4008321978981
4008321979025
4008321790187
4008321979001
4008321979049
4008321790200
40
35 / 280
40
Mounting Bracket for SLIM TRACK
Clear SLIM TRACK Cover
Diffuse SLIM TRACK Cover
Endcap for Diffuse Cover
Semi-Diffuse SLIM TRACK Cover
LF-LTS COVER C
LF-LTS-COVER-DIFFUSE
LF-LTS-ENDCAP
40
20 / 160
40
LF-LTS COVER S
Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not
necessarily correspond to the actual parameters of each single product which could differ from the typical data.
Subject to change without notice. Errors and omissions excepted.
Version: 2016-04-07
04
LINEARLIGHT FLEX ECO | LF05E2 | TECHNICAL DATASHEET
OPTOTRONIC
Recommended OPTOTRONIC® drivers
Non-dimmable
EAN
OPTOTRONIC OT 6/200-240/24 CE
OPTOTRONIC OT 8/200-240/24
OPTOTRONIC OT 20/220-240/24
OPTOTRONIC OT 20/120-240/24 S
OPTOTRONIC OT 75/220-240/24
OPTOTRONIC OT 75/220-240/24 E
OPTOTRONIC OT 80/220-240/24 P
OPTOTRONIC OT 120/220-240/24 P
OPTOTRONIC OT 240/220-240/24 P
Dimmable
4008321113269
4008321040169
4050300618111
4050300662626
4050300817477
4008321362476
4008321981684
4008321981707
4008321981721
OPTOTRONIC OT EASY 60 II
4008321187796
4008321808363
4008321964403
4008321371560
4008321981677
4008321981691
4008321981714
OPTOTRONIC OT EASY 80
OPTOTRONIC OT 65/220-240/24 3DIM E
OPTOTRONIC OTi DALI 75/220-240/24 1-4 CH
OPTOTRONIC OT 80/220-240/24 DIM P
OPTOTRONIC OT 120/220-240/24 DIM P
OPTOTRONIC OT 240/220-240/24 DIM P
Please consider that lengths may differ if further controls are installed.
Maximim length per OT:
lA + lB + lC + … lmax/OT
lA
Maximum length per strip:
lB
lA
lB
lC
l…
≤
≤
≤
≤
10,000 mm
10,000 mm
10,000 mm
10,000 mm
OT – 24V
lC
Global order information
EUROPE/MEA
4052899942790
4008321971357
4052899928435
4052899928442
4008321971418
4052899942790
LF05E2-W2F-824
LF05E2-W2F-827
LF05E2-W2F-830
LF05E2-W2F-840
LF05E2-W2F-865
LF05E2-W2F-824
Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not
necessarily correspond to the actual parameters of each single product which could differ from the typical data.
Subject to change without notice. Errors and omissions excepted.
Version: 2016-04-07
05
www.osram.com/flex
LINEARLIGHT FLEX ECO
LF05E2
TECHNICAL DATASHEET
2016-04-07
Related and further information
‒
‒
‒
OSRAM LED Systems www.osram.com/led-systems
OSRAM: FLEXIBLE LED MODULES www.osram.com/flex
OSRAM catalogue http://catalog.osram.com
‒
General information www.osram.com
OSRAM GmbH
Head Office:
Marcel-Breuer-Strasse 6
80807 Munich, Germany
+49 89 6213-0
www.osram.com
Sales and technical support is given by the local OSRAM subsidiaries.
On the OSRAM website all subsidiaries are listed with complete address and phone
numbers.
相关型号：
©2020 ICPDF网 联系我们和版权申明