SFH-4703AS [OSRAM]
IR lightsource with high efficiency;
| 型号： | SFH-4703AS |
| 厂家： | 
OSRAM GMBH |
| 描述： | IR lightsource with high efficiency |
| 文件： | 总14页 (文件大小：570K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2017-04-07
OSLON Black Series (810 nm) - 80°
Preliminary Version 0.0
SFH 4703AS
Features:
•
•
•
•
•
IR lightsource with high efficiency
Double stack emitter
Low thermal resistance (Max. 16 K/W)
Centroid wavelength 810 nm
Superior Corrosion Robustness (see chapter package outlines)
Applications
•
•
•
•
•
Infrared Illumination for cameras
Surveillance systems
Machine vision systems
Eye tracking systems
Iris Scanning
Notes
Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which
can be hazardous to the human eye. Products which incorporate these devices have to follow the safety
precautions given in IEC 60825-1 and IEC 62471.
Ordering Information
Type:
Radiant Intensity
Ie [mW/sr]
Ordering Code
IF = 1 A, tp = 10 ms
630 (≥ 500)
SFH 4703AS
Q65112A1370
Note:
measured at a solid angle of Ω = 0.01 sr
2017-04-07
1
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Maximum Ratings (TA = 25 °C)
Parameter
Symbol
Top
Values
Unit
°C
°C
°C
V
Operating temperature range
Storage temperature range
Junction temperature
Reverse voltage
-40 ... 125
Tstg
Tj
-40 ... 125
145
5
VR
Forward current
IF
1000
2
mA
A
Surge current
(tp ≤ 200 µs, D = 0)
IFSM
Power consumption
Ptot
4
16
2
W
Thermal resistance junction - solder point
RthJS
VESD
K / W
kV
ESD withstand voltage
(acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM)
Note:
For the forward current and power consumption please see "maximum permissible forward current"
diagram
Characteristics (TA = 25 °C)
Parameter
Symbol
Values
Unit
Peak wavelength
(typ)
(typ)
(typ)
λpeak
820
nm
(IF = 1 A, tp = 10 ms)
Centroid wavelength
(IF = 1 A, tp = 10 ms)
λcentroid
∆λ
810
30
nm
nm
°
Spectral bandwidth at 50% of Imax
(IF = 1 A, tp = 10 ms)
Half angle
(typ)
(typ)
ϕ
± 40
Dimensions of active chip area
L x W
0.75 x 0.75
mm x
mm
Rise and fall times of Ie ( 10% and 90% of Ie max
(IF = 1 A, RL = 50 Ω)
)
(typ)
tr / tf
8/ 14
ns
Forward voltage
(typ (max)) VF
(typ (max)) VF
IR
3.55 (≤ 4)
4 (≤ 4.9)
V
(IF = 1 A, tp = 10 ms)
Forward voltage
(IF = 2 A, tp = 100 μs)
V
Reverse current
(VR = 5 V)
not designed for µA
reverse operation
Total radiant flux
(IF = 1 A, tp = 100 µs)
(typ)
Φe
1040
mW
2017-04-07
2
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Parameter
Symbol
Values
Unit
Total radiant flux
(typ)
(typ)
(typ)
(typ)
Φe
1000
-0.3
-2
mW
(IF = 1 A, tp = 10 ms)
Temperature coefficient of Ie or Φe
(IF = 1 A, tp = 10 ms)
TCI
% / K
Temperature coefficient of VF
(IF = 1 A, tp = 10 ms)
TCV
TCλ
mV / K
nm / K
Temperature coefficient of wavelength
(IF = 1 A, tp = 10 ms)
0.3
Grouping (TA = 25 °C)
Group
Min Radiant Intensity
IF = 1 A, tp = 10 ms
Ie, min [mW / sr]
500
Max Radiant Intensity
IF = 1 A, tp = 10 ms
Ie, max [mW / sr]
800
SFH4703AS - DB
SFH4703AS - EA
630
1000
Note:
measured at a solid angle of Ω = 0.01 sr
Only one group in one packing unit (variation lower 1.6:1).
2017-04-07
3
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Relative Spectral Emission 1) page 13
Radiant Intensity 1) page 13
Irel = f (λ), TA = 25 °C, IF =1A, tp = 10 ms
Ie / Ie(1 A) = f(IF), single pulse, tp = 100 µs,
TA= 25°C
OHF05650
100
%
OHF05651
101
Irel
Ie
I
e (1 A)
80
60
40
20
0
100
5
10-1
5
10-2
700 750 800 850
nm 950
10-2
5 10-1
5 100
A
IF
101
λ
Forward Current 1) page 13
IF = f(VF), single pulse, tp = 100 µs, TA= 25°C
Max. Permissible Forward Current
IF = f (TS), RthJS = 16 K/W
OHF05652
101
[ ]
A
1000
IF
800
600
400
200
0
100
5
10-1
5
10-2
0
20 40 60 80 100 120 140
2.5
3
3.5
4
V 4.5
[
]
VF
2017-04-07
4
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Permissible Pulse Handling Capability
IF = f (tp), TS = 25 °C, Duty cycle D = parameter
Permissible Pulse Handling Capability
IF = f(tp), TS = 85 °C, duty cycle D = parameter
[ ]
[ ]
2.0
2.0
1.5
1.0
1.5
1.0
: D = 1
: D = 1
: D = 0,5
: D = 0,2
: D = 0,5
: D =0,2
0.5
0.0
: D = 0,1
0.5
: D =0,1
: D = 0,05
: D = 0,02
: D = 0,01
: D = 0,005
: D =0,05
: D =0,02
: D =0,01
: D =0,005
0.0
10-5 10-4 10-3 0.01 0.1
1
10 100
[ ]
10-5 10-4 10-3 0.01 0.1
1
10 100
[ ]
Radiation Characteristics 1) page 13
Irel = f(ϕ), TA= 25°C
φ
[ ]
0° 10° 20° 30° 40° 50° 60° 70° 80° 90°
-10°
-20°
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
-30°
-40°
-50°
-60°
-70°
-80°
-90°
2017-04-07
5
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Package Outline
Dimensions in mm.
Package
OSLON Black Series
Approximate Weight:
31 mg
Note:
Package is not suitable for ultra sonic cleaning.
Note:
Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40°C / 90%rh
/ 15ppm H2S / 336h
Note:
Anode mark: Anode pad has chamfered edge, which points to cathode
2017-04-07
6
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Recommended Solder Pad
Dimensions in mm [inch].
Note:
For superior solder joint connectivity results we recommend soldering under standard nitrogen
atmosphere.
2017-04-07
7
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Reflow Soldering Profile
Product complies to MSL Level 2 acc. to JEDEC J-STD-020E
OHA04525
300
˚C
T
250
T
245 ˚C
p
240 ˚C
tP
tL
217 ˚C
200
150
tS
100
50
25 ˚C
0
0
50
100
150
200
250
s
300
t
OHA04612
Pb-Free (SnAgCu) Assembly
Profile Feature
Profil-Charakteristik
Symbol
Symbol
Unit
Einheit
Minimum
Recommendation
Maximum
Ramp-up rate to preheat*)
25 °C to 150 °C
2
3
K/s
Time tS
TSmin to TSmax
tS
60
100
2
120
3
s
Ramp-up rate to peak*)
K/s
TSmax to TP
TL
tL
Liquidus temperature
217
80
°C
s
Time above liquidus temperature
Peak temperature
100
TP
tP
245
20
260
30
°C
s
Time within 5 °C of the specified peak
temperature TP - 5 K
10
3
6
K/s
s
Ramp-down rate*
TP to 100 °C
480
Time
25 °C to TP
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
2017-04-07
8
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Taping
Dimensions in mm [inch].
Tape and Reel
12 mm tape with 600 pcs. on ∅ 180 mm reel
W1
D0
P0
P2
Label
P1
Direction of unreeling
Direction of unreeling
W2
Leader: min0 4±± mm *
Trailer: min0 16± mm *
*) Dimensions acc0 to IEC 6±.86-3; EIA 481-D
OHAY0324
2017-04-07
9
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Tape dimensions [mm]
Tape dimensions in mm
W
E
F
P0
P1
P2
D0
12 + 0.3 / - 0.1 4 ± 0.1
4 ± 0.1
or
8 ± 0.1
2 ± 0.05
1.5 ± 0.1
1.75 ± 0.1
5.5 ± 0.05
Reel dimensions [mm]
Reel dimensions in mm
A
W
Nmin
60
W1
W2max
18.4
180
12
12.4 + 2
Barcode-Product-Label (BPL)
OSRAM Opto
BIN1: XX-XX-X-XXX-X
LX XXXX
Semiconductors
RoHS Compliant
(6P) BATCH NO: 1234567890
(1T) LOT NO: 1234567890
ML Temp ST
XXX °C X
X
(9D) D/C: 1234
Pack: RXX
DEMY XXX
X_X123_1234.1234 X
(X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X
OHA04563
Dry Packing Process and Materials
Moisture-sensitive label or print
Barcode label
OSRAM
Humidity indicator
Barcode label
D o n o t e a t .
A v o i d m e t a l c o n t a c t .
D i s c a r d i f c i r c l e s o v e r r u n .
b a g o p e n i n g .
P l e a s e c h e c k t h e H I C i m m i d i a t e l y a f t e r
c h e c k d o t
C o m p a r a t o r
W E T
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 5 %
I f w e t ,
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 0 %
I f w e t ,
c h a n g e d e s i c c a n t
p a r t s s t i l l a d e q a t e l y d r y .
I f w e t ,
u
5 %
M I L - I - 8 8 3 5
H u m i d i t y I n d i c a t o r
OSRAM
Desiccant
OHA00539
Note:
Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet. Here you will also find the normative
references like JEDEC.
2017-04-07
10
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Transportation Packing and Materials
Barcode label
Barcode label
Bin1: P-1-20
Bin2: Q-1-20
Bin3:
Temp ST
220
240 C R
260
C
R
DEMY
R18
ML
2
C
RT
LSY T676
Multi T
2a
3
Additional TEXT
R077
PACKVAR:
P-1+Q-1
(G) GROUP:
0144
(9D) D/C:
210021998
2000
OSRAM Opto
Semiconductors
(Q)QTY:
123GH1234
(6P) BATCH NO:
5
2
4
1
0
0
1
(1T) LOT NO:
1
(X) PROD NO:
Bin1: P-1-20
Bin2: Q-1-20
Bin3:
Temp ST
220
240
260
C
R
C
DEMY
R18
ML
R
C RT
2
LSY T676
2a
3
Additional TEXT
R077
PACKVAR:
Multi TOP
P-1+Q-1
(G) GROUP:
0144
(9D) D/C:
210021998
2000
OSRAM Opto
Semiconductors
(Q)QTY:
123GH1234
(6P) BATCH NO:
5
2
4
1
0
0
1
(1T) LOT NO:
1
OSRAM
(X) PROD NO:
Packing
Sealing label
OHA02044
Dimensions of transportation box in mm
Width
Length
Height
195 ± 5
195 ± 5
30 ± 5
2017-04-07
11
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Disclaimer
OSRAM OS assumes no liability whatsoever for any use of this document or its content by recipient including, but not
limited to, for any design in activities based on this preliminary draft version. OSRAM OS may e.g. decide at its sole
discretion to stop developing and/or finalising the underlying design at any time.
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of
OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be
endangered.
2017-04-07
12
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Glossary
1)
Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily
correspond to the actual parameters of each single product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data
will be changed without any further notice.
2017-04-07
13
DRAFT – For Reference only.
Subject to change without notice.
Preliminary Version 0.0
SFH 4703AS
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.
2017-04-07
14
DRAFT – For Reference only.
Subject to change without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明