SFH5110 [OSRAM]

IR-Empfanger fur Fernbedienungen IR-Receiver for Remote Control Systems Lead (Pb) Free Product - RoHS Compliant; IR- Empfanger毛皮Fernbedienungen红外接收器的远程控制系统铅（Pb ）免费产品 - 符合RoHS


型号：	SFH5110
厂家：	OSRAM GMBH
描述：	IR-Empfanger fur Fernbedienungen IR-Receiver for Remote Control Systems Lead (Pb) Free Product - RoHS Compliant IR- Empfanger毛皮Fernbedienungen红外接收器的远程控制系统铅（Pb ）免费产品 - 符合RoHS 远程控制
文件：	总9页 (文件大小：144K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

IR-Empfänger für Fernbedienungen

IR-Receiver for Remote Control Systems

Lead (Pb) Free Product - RoHS Compliant

SFH 5110

Beschreibung

Description

SFH 5110 ist ein Infrarot-Empfänger für die Erken- SFH 5110 is a IR receiver to detect light from

nung von Signalen aus Infrarot-Fernbedienungs- infrared remote control systems. The IC includes

systemen und bestehen aus Fotodiode, Vorver- photodiode, preamplifier, automatic gain control,

stärker, automatischer Verstärkungsregelung, bandpass and demodulator. The black-colored

Bandpaß-Filter und Demodulator. Das Gehäuse package is designed as daylight-cutoff filter.

ist zur Unterdrückung des Tageslichteinflusses

schwarz eingefärbt.

Wesentliche Merkmale

Features

• IC mit monolithisch integrierter Fotodiode

(Ein-Chip Lösung)

• IC with monolithic integrated photodiode (single

chip solution)

• Speziell geeignet für Anwendungen von

940 nm

• Especially suitable for applications of 940 nm

• Hohe Empfindlichkeit

• High sensitivity

• Verschiedene Trägerfrequenzen erhältlich

• TTL und CMOS kompatibel

• Ausgang: aktiv „Low“

• Various carrier frequencies available

• TTL and CMOS compatibility

• Output: active Low

Anwendungen

Applications

• Empfänger in Fernbedienungen für TV,

Videorecorder, HiFi, Satellitenempfänger und

CD-Spieler

• Remote control module for TV sets, VCRs, hi-fi

audio receivers, SAT receivers and compact

disk players

• Um hohe Sicherheit bei der Datenübertragung

zu erreichen, sind fehlerkorrigierende Codes

einzusetzten

• For safe data transmission error tolerant codes

have to be used

2007-11-12

SFH 5110

Typ

Trägerfrequ.

Bestellnr.

Type

Carrier

Frequency

kHz

Ordering Code

SFH 5110-30¹⁾

SFH 5110-33¹⁾

SFH 5110-36

SFH 5110-38

Q62702P5088

Q62702P5089

Q62702P5090

Q62702P5091

Q62702P5092

SFH 5110-40¹⁾

Mindestbestellmenge 80000 Stück / Minimum order quantity 80000 pieces

2007-11-12

SFH 5110

Grenzwerte (T_A= 25 °C)

Maximum Ratings

Bezeichnung

Parameter

Symbol

Wert

Value

Einheit

Unit

Betriebs- und Lagertemperatur

T_op

– 10 … + 75

°C

Operation and storage temperature range

T_stg

– 30 … + 100

Betriebsspannung

Supply voltage

V_CC

V_OUT

I_OUT

P_tot

6.3

Ausgangsspannung

Output voltage

Ausgangsstrom

Output current

Verlustleistung

Total power dissipation, T_A≤ 85 °C

Empfohlener Arbeitsbereich

Recommended Operating Conditions

Bezeichnung

Parameter

Symbol

Wert

Value

Einheit

Unit

min.

typ.

max.

Betriebstemperatur

Operating temperature

T_op

V_cc

– 10

–

°C

Betriebsspannung

Supply Voltage

4.5

5.0

5.5

Kennwerte (T_A= 25 °C)

Characteristics

Bezeichnung

Parameter

Symbol

Wert

Value

Einheit

Unit

min.

typ.

max.

Stromaufnahme, V_CC= 5 V, E = 0

Current consumption

I_CC

λ_{s max}

–

1.3

–

Wellenlänge der max. Fotoempfindlichkeit

Wavelength of max. sensitivity

–

940

–

Spektraler Bereich der Fotoempfindlichkeit

Spectral range of sensitivity

830

1100

2007-11-12

SFH 5110

Kennwerte (T_A= 25 °C)

Characteristics (cont’d)

Bezeichnung

Parameter

Symbol

Wert

Value

Einheit

Unit

min.

typ.

max.

Ausgangsspannung

Output voltage

Output “High” - (I_out= 10 µA)

Output “Low” - (I_out= 500 µA)

V_{OUT high}V_cc-0.5

–

0.5

V_{OUT low}

–

Trägerfrequenz

Carrier frequency

SFH 5110-30

SFH 5110-33

SFH 5110-36

SFH 5110-38

SFH 5110-40

f₀

–

kHz

Min. Bestrahlungsstärke (Testsignal, s. Fig. 3)

Min. Threshold irradiance (test signal, see Fig. 3)

f = f₀, t_p,I= 600 µs

E_{e min}

–

0.35

0.5

–

mW/m²

Min. Eingangspulsbreite „ON“

(Testsignal, s. Fig. 3)¹⁾

t_p,I

6/f_O

–

µs

Min. Input pulse width “ON”

(test signal, see Fig. 3)¹⁾

Ausgangspulsbreite „ON“

(Testsignal, s. Fig. 3)

t_p,O

t_p,I

– 6/f_O

–

t_p,I

+ 6/f_O

µs

Output pulse width “ON” (test signal, see Fig. 3,

E_e= 1 mW/m²)

50%-Filterbandbreite, f = f_O, E_V= 0, V_CC= 5 V

∆f_50%

kHz

50%-Filter bandwidth

Die volle Empfindlichkeit wird bei einer Burstlänge von mindestens 6 Pulsen erreicht. Die Reichweite bei

Verwendung eines typischen Senders (SFH 4510/SFH 4515, I_F= 500 mA) beträgt etwa 30 m.

A minimum burst length of 6 pulses is necessary for full sensitivity. The transmission distance with a typical

transmitter (SFH 4510/SFH 4515, I_F= 500 mA) is about 30 m.

2007-11-12

SFH 5110

V_CC

Control

Circuit

Input

23 kΩ

OUT

GND

Bandpass

AGC

Demodulator

OHF00404

Figure 1

Blockschaltbild

Block Diagram

100 Ω ^∗)

+5 V

IR-Receiver

>10 k

Ω

4.7 µF ^∗)

optional

µC

GND

OHF00430

∗) only necessary to suppress power supply disturbances

Figure 2

Externe Beschaltung

External Circuit

2007-11-12

SFH 5110

t _{p, I}

t _{off, I}

t _{p, I}

Transmitter

t _{p, o}= t _{p, I}6 / f_o

Detector

(Output Signal)

Burst wave: carrier frequency f_o, Duty cycle = 0.5

OHF00399

Figure 3

Optisches Testsignal

Optical Test Signal

2007-11-12

SFH 5110

Relative Spectral Sensitivity

Vertical Directivity ϕ_y

Horizontal Directivity ϕ_x

_rel= f (λ)

100

OHF00401

OHF00400

OHF00402

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

S_rel

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

[

]

700

800

900

1000 nm 1100

[

]

Relative Sensitivity E_e/E_{e, min}= f (f₀)

OHF00403

4.5

3.5

2.5

1.5

f_o-4

f_o-2

f_o

f_o+2 kHz f_o+4

Center Frequency

2007-11-12

SFH 5110

Maßzeichnung

Package Outlines

24.4 (0.961)

23.4 (0.921)

6.1 (0.240)

5.9 (0.232)

1.3 (0.051)

1.1 (0.043)

32.0 (1.260)

30.0 (1.181)

GEOY6985

Maße in mm (inch) / Dimensions in mm (inch).

2007-11-12

SFH 5110

Lötbedingungen

Soldering Conditions

Wellenlöten (TTW)

TTW Soldering

(nach CECC 00802)

(acc. to CECC 00802)

OHLY0598

300

10 s

Normalkurve

standard curve

250

200

150

100

235 C ... 260 C

Grenzkurven

limit curves

2. Welle

2. wave

1. Welle

1. wave

ca 200 K/s

2 K/s

5 K/s

100 C ... 130 C

Zwangskühlung

forced cooling

2 K/s

100

150

200

250

Published by

OSRAM Opto Semiconductors GmbH

Wernerwerkstrasse 2, D-93049 Regensburg

www.osram-os.com

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components ¹, may only be used in life-support devices or systems ²with the express written approval of OSRAM OS.

¹A critical component is a component usedin a life-support device or system whose failure can reasonably be expected

to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.

²Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.

2007-11-12

SFH5110 [OSRAM]

相关型号：

SFH5110-30

SFH5110-30

SFH5110-33

SFH5110-33

SFH5110-36

SFH5110-36

SFH5110-38

SFH5110-38

SFH5110-40

SFH5110-40

SFH5111

SFH5111-30