PLBT3535HPCA-WCR27-B [P-TEC]
MSL2 qualified according to J-STD 020;
| 型号： | PLBT3535HPCA-WCR27-B |
| 厂家： | 
P-tec Corporation |
| 描述： | MSL2 qualified according to J-STD 020 |
| 文件： | 总15页 (文件大小：2284K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRODUCT SPECIFICATION
Part Number
PLBT3535HPCA-WCxxxx
Details
Features
Good thermal dissipation
High Power Color 3535 Ceramic LED
3.5 x 3.5 x 2.0mm / 3.5 x 3.5 x 2.9mm
1,000 piece reels
Emitting Color: Red or Yellow
AlInGaP dice used
MSL2 qualified according to J-STD 020
ESD 8KV (HGM: MIL-STD883)
RoHS & REACH Compliant
Note:
1. Specifications subject to change without notice
www.p-tec.net
102014 Rev0 MS
Page 1 of 15
Mechanical Dimensions
Notes:
1. Dimensions in millimeters and tolerance is ±0.13mm unless otherwise noted
www.p-tec.net
102014 Rev0 MS
Page 2 of 15
Device Selection Guide
Forward
Voltage (V)
Luminous Flux (lm)
Group 350 mA 700 mA
Wavelength
(nm)
Model Number
Color
Min
Max
B24
B25
B26
B27
B28
B25
B26
B27
B28
B24
B25
B26
B27
B28
45
50
55
60
65
50
55
60
65
45
50
55
60
65
76
85
93
102
110
85
PLBT3535HPCA-WCR27
PLBT3535HPCA-WCY27
Red
620-630
585-595
620-630
1.8
2.8
2.8
2.8
93
Yellow
Red
1.8
1.8
102
119
76
85
93
PLBT3535HPCA-WCR27-B
(Note 3)
102
110
Notes: 1. Forward voltage (VF ) ±0.05V, Luminous flux (Φv) ±5%
2. IS standard testing.
3. 60 degree viewing angle version
www.p-tec.net
102014 Rev0 MS
Page 3 of 15
Absolute Maximum Ratings at Ta=25℃
Rating
Typical
350
--
--
-5
--
150
--
Parameter
Symbol
Unit
Min
--
--
1.8
--
--
--
-40
--
Max
700
1000
2.8
--
10
--
100
--
DC Forward Current
Pulse Forward Current
Forward Voltage – Red / Yellow
Reverse Voltage
Leakage Current (5V)
Junction Temperature
Storage Temperature
Soldering Temperature
Thermal Resistance Junction /
Solder Point
IF
IPF
VF
VR
IR
TJ
Tstg
Tsol
mA
mA
V
V
μA
℃
℃
℃
260
RTH
--
6
--
--
℃/W
60
120
Viewing Angle
2θ ½
--
deg
Notes: 1. For other ambient, limited setting of current will depend on derating curves
2. D=0.01s duty 1/10
3. When drive on maximum current, TJ must be kept below 150
4. Viewing angle (2θ ½) ±10°
www.p-tec.net
102014 Rev0 MS
Page 4 of 15
Intensity Binning
Bin Code (350mA)
Min. Φv (lm)
Max. Φv (lm)
B23
B24
B25
B26
B27
B28
40
45
50
55
60
65
45
50
55
60
65
70
Forward Voltage Binning
Bin Code (350mA)
B1820
Min. VF (V)
Max. VF (V)
1.8
2.0
2.2
2.4
2.6
2.0
2.2
2.4
2.6
2.8
V2022
V2224
V2426
V2628
www.p-tec.net
102014 Rev0 MS
Page 5 of 15
Relative Spectral Power Distribution
Electronic-Optical Characteristics
www.p-tec.net
102014 Rev0 MS
Page 6 of 15
Typical Spatial Distribution
Thermal Design for De-Rating
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
ambient in order to optimize lamp life and optical characteristics.
www.p-tec.net
102014 Rev0 MS
Page 7 of 15
Suggested Stencil Pattern (Recommendations for Reference)
Note: Suggested stencil t = 0.12mm
www.p-tec.net
102014 Rev0 MS
Page 8 of 15
Packaging and Reel Dimensions
www.p-tec.net
102014 Rev0 MS
Page 9 of 15
Notes:
1. Reeled products (minimum number of pieces is 100 and maximum is 1000) packed in sealed moisture-proof bags along with a desiccant;
a maximum of five moisture-proof bags packed inside the box (size: 240mm x 195mm x 100mm ±5mm) and a maximum of four inside
boxes are put in the outside box
2. (size: 410mm x 255mm x 240mm ±5mm) together with buffer material packed.
3. (Part No., Lot No., quantity should appear on the label of the moisture-proof bag and the cardboard box.)
www.p-tec.net
102014 Rev0 MS
Page 10 of 15
Reflow Profile
www.p-tec.net
102014 Rev0 MS
Page 11 of 15
Precautions
1. Recommendation for using LEDs
1.1 The lens of LEDs should not be exposed to dust or debris. Excessive dust and debris may cause a drastic
decrease in the luminosity.
1.2 Avoid mechanical stress on LED lens.
1.3 Do not touch the LED lens surface. It would affect the optical performance of the LED due to the LED lens’
damage.
1.4 Pick & place tools are recommended for the remove of LEDs from the factory tape & reel packaging
2. Pick & place nozzle
The pickup tool was recommended and shown as below)
3. Lens handling
Please follow the guideline to pick LEDs
3.1 Use tweezers to pick LEDs
3.2 Do not touch the lens by using tweezers
3.3 Do not touch lens with fingers
3.4 Do not apply more than 4N of lens (400g) directly onto the lens
www.p-tec.net
102014 Rev0 MS
Page 12 of 15
4. Lens cleaning
In the case which a small amount of dirt and dust particles remain on the lens surface, a suitable cleaning solution
can be applied.
4.1 Try a gentle wiping with dust-free cloth
4.2 If needed, use dust-free cloth and isopropyl alcohol to gently clean the dirt from the lens surface.
4.3 Do not use other solvents as they may directly react with the LED assembly
4.4 Do not use ultrasonic cleaning which will damage the LEDs
5. Carrier tape handling
The following items are recommended when handling the carrier tape of LEDs
5.1 Do not twist the carrier tape
5.2 The inward bending diameter should not be smaller than 6cm for each carrier tape.
5.3 Do not bend the tape outward.
www.p-tec.net
102014 Rev0 MS
Page 13 of 15
Test Items and Results of Reliability
Tested with P-tec
Tested with P-tec
Standard
Tested with P-tec
Standard
Notes: 1. USL: Upper specification level
2. LSL: Lower specification level
www.p-tec.net
102014 Rev0 MS
Page 14 of 15
Approved By
Checked By
Prepared By
Customer Approval
Signatures
Record Of Revisions
Rev.
Comments
Page
Date
0
Released Spec
--
10/20/14
www.p-tec.net
102014 Rev0 MS
Page 15 of 15
相关型号：
©2020 ICPDF网 联系我们和版权申明