BBH48-50V30 [PAIRUI]

DC Converter;
BBH48-50V30
型号: BBH48-50V30
厂家: PAIRUI GROUP INC.    PAIRUI GROUP INC.
描述:

DC Converter

文件: 总4页 (文件大小:501K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DC-DC Converter  
Bricks, Open/Enclosed  
BBH SERIES, 1/2 BRICK, UP TO 150W  
FEATURES:  
5 years warranty  
1500Vdc isolation voltage  
Wide (2:1) input voltage range  
Efficiency up to 90%  
Operating temperature range -40°C to +100°C  
Under voltage, over current, short circuit,  
over voltage protection  
Remote on/off  
Adjustable output voltage  
Input voltage  
Output voltage  
(Vdc)  
Output current  
Efficiency  
Typ.  
Model  
(Vdc)  
(A)  
3.3  
3.3  
5.0  
5.0  
5.0  
5.0  
3.3  
3.3  
3.3  
3.3  
3.3  
20.0  
30.0  
10.0  
15.0  
20.0  
30.0  
10.0  
15.0  
20.0  
30.0  
40.0  
85%  
84%  
87%  
88%  
86%  
85%  
88%  
88%  
88%  
86%  
83%  
BBH24-33V20  
BBH24-33V30  
BBH24-50V10  
BBH24-50V15  
BBH24-50V20  
BBH24-50V30  
BBH48-33V10  
BBH48-33V15  
BBH48-33V20  
BBH48-33V30  
BBH48-33V40  
24(18~36)  
BBH48-50V10  
5.0  
5.0  
10.0  
15.0  
90%  
90%  
90%  
87%  
84%  
86%  
87%  
87%  
48(36~72)  
BBH48-50V15  
BBH48-50V20  
5.0  
20.0  
BBH48-50V30  
5.0  
30.0  
BBH48-50V3-33V5  
BBH48-50V12-30V15  
5.0, 3.3  
5.0, 3.0  
5.0  
3.0, 5.0  
12.0, 15.0  
15.0  
BBH110-50V15  
BBH110-50V30  
110(66~154)  
5.0  
30.0  
Notes: other input and output models may available on request.  
www.pairuigroup.com  
Page: 1 / 4  
Date:01/23/2014  
DC-DC Converter  
Bricks, Open/Enclosed  
BBH SERIES, 1/2 BRICK, UP TO 150W  
ELECTRICAL  
24Vdc  
18-36Vdc  
36-72Vdc  
66-154Vdc  
Input voltage range  
48Vdc  
110Vdc  
ON: High level or left open  
OFF: Low level or grounded  
Positive logic  
Negative logic  
Remote control  
OFF: High level or left close  
ON: Low level or grounded  
33-150W  
Output power  
Input voltage range  
Single output  
Output voltage  
3.3/5Vdc  
±1%  
Output voltage accuracy  
Output voltage adjustable  
Line regulation  
Input voltage range  
Negative logic  
±10%  
Full load  
±0.2%  
±0.5%  
Load regulation  
10%-100% full load  
Dynamic response  
25%-50%-75% load capability  
∆Vo/∆t: ±4.0%/500μs  
(transient/recovery time)  
Ripple and noise  
Parallel test, 20MHz wide range  
Typical value  
180mVp-p max.  
300KHz typ.  
1500Vdc  
Operating frequency  
Input to output  
Input to case  
Isolation voltage  
1050Vdc  
Output to case  
---  
500Vdc  
Isolation resistance  
Safety  
30MΩ  
IEC-60950-1, UL-60950-1  
EN-60950-1, GB4943  
200ppm  
---  
Temperature coefficient  
PCB operating temperature  
Storage temperature range  
Over temperature protection  
Under voltage protection  
Over current protection  
---  
---  
-40°C to +100°C  
---  
-40°C to +105°C  
Typical  
---  
110°C typ.  
Yes  
---  
Yes  
Short circuit protection  
---  
Yes  
Over voltage protection  
Relative humidity  
Packing  
---  
Yes  
95% max.  
---  
---  
Hole package  
2x106Hrs  
MTBF  
Bellcore TR-332, 25°C  
Notes: Unless otherwise specified, all the parameters of the test conditions are as follows: ambient temperature  
25 , the nominal input voltage, pure resistive nominal load.  
www.pairuigroup.com  
Page: 2 / 4  
Date:01/23/2014  
DC-DC Converter  
Bricks, Open/Enclosed  
BBH SERIES, 1/2 BRICK, UP TO 150W  
MECHANICAL  
CONNECTION  
PIN #  
SINGLE  
-Vin  
FG  
1
2
3
REM  
+Vin  
GND  
-S  
4
5
6
7
8
TRIM  
+S  
9
+Vo  
PCB LAYOUT  
Note:  
* Unit is mm(inch).  
DERATING CURVE  
EFFICIENCY CURVE  
www.pairuigroup.com  
Page: 3 / 4  
Date:01/23/2014  
DC-DC Converter  
Bricks, Open/Enclosed  
BBH SERIES, 1/2 BRICK, UP TO 150W  
NOTES  
RECOMMENDED TEST AND APPLICATION CIRCUIT  
1. TVS&FUSE be helpful with over voltage protection and inrush limiting. Recommended FUSE better be 1.5~2times of the  
rated current .  
2. The input filter capacitor C6 could select the aluminum electrolytic capacitors or tantalum capacitors, and the  
withstand voltage should be greater than the highest input voltage. Recommended capacitor should be between  
22μF~100μF.  
3. C1,C2 for the input filter capacitor,0.1~1μF high-frequency ceramics capacitor or chip capacitor are recommended. The  
withstand voltage of output filter C5, C7 should be greater than the highest output voltage. Recommended capacitor of  
C7 better within 100μF and C5 connected with the chip to reduce the input voltage peak, recommended 0.1~1μF  
high-frequency ceramics capacitor or chip capacitor.  
www.pairuigroup.com  
Page: 4 / 4  
Date:01/23/2014  

相关型号:

BBL

DC-DC Converter
PAIRUI

BBL-101-G-A

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC

BBL-101-G-B

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC

BBL-101-G-C

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC

BBL-101-G-D

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC

BBL-101-G-E

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle, ROHS COMPLIANT
SAMTEC

BBL-101-G-F

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, ROHS COMPLIANT
SAMTEC

BBL-101-G-G

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC

BBL-101-G-H

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC

BBL-101-T-A

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC

BBL-101-T-B

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC

BBL-101-T-C

Board Connector, 1 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC