AGN200A4HX [PANASONIC]
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, Random, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT;型号: | AGN200A4HX |
厂家: | PANASONIC |
描述: | Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, Random, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT 光电二极管 继电器 |
文件: | 总5页 (文件大小:2304K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High Sensitivity, with
100mW nominal operating
power, in a compact and
space saving case
GN RELAYS
FEATURES
1. Compact slim body saves space.
Thanks to the small surface area of 5.7
mm 10.6 mm .224 inch .417 inch
and low height of 9.0 mm .354 inch,
the packaging density can be
close-together are minimized. This all
means a packaging density higher
than ever before.
6. Nominal operating power: 140 mW
7. Outstanding vibration and shock
resistance
Functional shock resistance: 750 m/s2
Destructive shock resistance:
1,000 m/s2
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3.3 mm .130 inch)
increased to allow for much smaller
designs.
2. High sensitivity single side stable
type (Nominal operating power:
100mW) is available.
3. Outstanding surge resistance
Surge breakdown voltage between
contacts and coil:
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm .197 inch)
2,500 V 210 s (Telcordia)
Surge breakdown voltage between
open contacts:
8. Sealed construction allows
automatic washing.
9. Sealed according to RTIII (IP67)
1,500 V 10160 s (FCC part 68)
4. The use of twin crossbar contacts
ensures high contact reliability.
AgPd contact is used because of its
good sulfide resistance. Adopting low-
gas molding material. Coil assembly
molding technology which avoids
generating volatile gas from coil.
5. Increased packaging density
Due to highly efficient magnetic circuit
design, leakage flux is reduced and
changes in electrical characteristics
from components being mounted
TYPICAL APPLICATIONS
1. Telephone switchboard
2. Telecommunications equipment
3. Securits equipmeny
4. Test and measurement equipment
5. Electronic consumer and audio
visual equipment
ORDERING INFORMATION
AGN
2
0
Contact arrangement
2: 2 Form C
Operating function
0: Single side stable
1: 1 coil latching
6: High sensitivity single side
stable type
Type of operation
0: Standard type (B.B.M.)
Terminal shape
Nil: Standard PC board terminal
A: Surface-mount terminal A type
S: Surface-mount terminal S type
Nominal coil voltage (DC)
1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V
12: 12V 24: 24V
Packing style
Nil: Tube packing
X: Tape and reel packing (picked from 1/2/3/4 pin side)
Z: Tape and reel packing (picked from 5/6/7/8 pin side)
ds_61007_en_gn: 280114D
1
GN (AGN)
TYPES
1. Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
High sensitivity single side stable
Part No.
Nominal coil voltage
1.5V DC
AGN2001H
AGN20003
AGN2004H
AGN20006
AGN20009
AGN20012
AGN20024
AGN2101H
AGN21003
AGN2104H
AGN21006
AGN21009
AGN21012
AGN21024
AGN2601H
3V DC
AGN26003
4.5V DC
AGN2604H
6V DC
AGN26006
9V DC
AGN26009
12V DC
AGN26012
24V DC
AGN26024
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2. Surface-mount terminal
1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
High sensitivity single side stable
Part No.
Nominal coil voltage
1.5V DC
3V DC
AGN2001H
AGN20003
AGN2004H
AGN20006
AGN20009
AGN20012
AGN20024
AGN2101H
AGN21003
AGN2104H
AGN21006
AGN21009
AGN21012
AGN21024
AGN2601H
AGN26003
4.5V DC
6V DC
AGN2604H
AGN26006
9V DC
AGN26009
12V DC
24V DC
AGN26012
AGN26024
: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2) Tape and reel packing
Nominal coil voltage
Single side stable
Part No.
1 coil latching
Part No.
High sensitivity single side stable
Part No.
1.5V DC
3V DC
AGN2001HZ
AGN20003Z
AGN2004HZ
AGN20006Z
AGN20009Z
AGN20012Z
AGN20024Z
AGN2101HZ
AGN21003Z
AGN2104HZ
AGN21006Z
AGN21009Z
AGN21012Z
AGN21024Z
AGN2601HZ
AGN26003Z
4.5V DC
6V DC
AGN2604HZ
AGN26006Z
9V DC
AGN26009Z
12V DC
24V DC
AGN26012Z
AGN26024Z
: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed.
RATING
1. Coil data
1) Single side stable type
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
1.5V DC
3V DC
93.8mA
46.7mA
31mA
16
64.2
145
257
579
1,028
4.5V DC
6V DC
150%V of
nominal voltage
140mW
230mW
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
23.3mA
15.5mA
11.7mA
9V DC
12V DC
120%V of
nominal voltage
24V DC
9.6mA
2,504
2) 1 coil latching type
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
1.5V DC
3V DC
66.7mA
33.3mA
22.2mA
16.7mA
11.1mA
8.3mA
22.5
90
4.5V DC
6V DC
202.5
360
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
100mW
120mW
150%V of
nominal voltage
9V DC
810
12V DC
24V DC
1,440
4,800
5.0mA
*Pulse drive (JIS C 5442-1996)
ds_61007_en_gn: 280114D
2
GN (AGN)
3) High sensitivity single side stable type
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
1.5V DC
3V DC
66.7mA
33.3mA
22.2mA
16.7mA
11.1mA
8.3mA
22.5
90
4.5V DC
6V DC
202.5
360
150%V of
nominal voltage
100mW
120mW
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
9V DC
810
12V DC
1,440
120%V of
nominal voltage
24V DC
5.0mA
4,800
*Pulse drive (JIS C 5442-1996)
2. Specifications
Characteristics
Item
Specifications
Arrangement
Initial contact resistance, max.
2 Form C
Contact
Max. 100 m (By voltage drop 6 V DC 1A)
Contact material
Stationary contact: AgPd+Au clad Movable contact: AgPd
1 A 30 V DC, 0.3 A 125 V AC (resistive load)
30 W (DC), 37.5 V A (AC) (resistive load)
110 V DC, 125 V AC
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*1
Single side stable
1 A
Rating
10A 10 mV DC
140mW (1.5 to 12 V DC), 230mW (24 V DC)
Nominal operating
power
High sensitivity single side
stable type
100mW (1.5 to 12 V DC), 120mW (24 V DC)
1 coil latching
Min. 1,000M (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Insulation resistance (Initial)
Between open contacts
750 Vrms for 1min. (Detection current: 10mA)
1,500 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10160s) (FCC Part 68)
2,500 V (210s) (Telcordia)
Breakdown voltage
(Initial)
Between contact and coil
Between contact sets
Electrical
characteristics
Between open contacts
Between contacts and coil
Surge breakdown
voltage (Initial)
Max. 50C
Temperature rise (at 20C 68F)
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Operate time [Set time] (at 20C 68F)
Release time [Reset time] (at 20C 68F)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Functional
Shock resistance
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Min. 5 107 (at 180 times/min.)
Min. 105 (1 A 30 V DC resistive), 105 (0.3 A 125 V AC resistive) (at 20 times/min.)
Expected life
Conditions
Ambient temperature:
(Single side stable, 1 coil latching type) –40C to +85C –40F to +185F
(High sensitivity single side stable type) –40C to +70C –40F to +158F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions for operation, transport and storage*2
Max. operating speed (at rated load)
20 times/min.
Unit weight
Notes:
Approx. 1 g .035 oz
*1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2 Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
REFERENCE DATA
1. Max. switching capacity
2. Life curve
3. Mechanical life
Tested sample: AGN2004H, 15 pcs.;
Operating speed: 180 times/min
.
100
4
DC resistive load
AC resistive load
3.5
Pick-up voltage
Max.
Min.
1.0
50
40
3
2.5
2
30
DC 30V resistive load
Drop-out voltage
20
Max.
Min.
1.5
1
0.3
AC 125V
resistive load
10
0
0.5
0
30
0.2
0.4
0.6
0.8
1.0
1.2
0
10
30
50
100
No. of operations, ×104
Contact voltage, V
Switching current, A
ds_61007_en_gn: 280114D
3
GN (AGN)
4. Electrical life (1A 30V DC resistive load)
5. Coil temperature rise
Tested sample: AGN2004H, 6 pcs.
Operating speed: 20 cpm
Tested sample: AGN2004H, AGN20024, 6 pcs.
Point measured: Inside the coil
Ambient temperature: Room temperature
Change of pick-up and drop-out voltage
Change of contact resistance
70
100
90
100
90
80
70
60
50
40
4.5V DC type
N.C. contact
N.O. contact
24V DC type
60
80
Pick-up voltage
50
40
30
20
1 A
0 A
Max.
70
60
50
40
Min.
1 A
0 A
X
X
Drop-out voltage
Max.
Min.
30
20
10
0
30
20
10
0
10
0
100 110 120 130 140 150
Coil applied voltage, %
0
5
10
0
5
10
No. of operations, ×104
No. of operations, ×104
6-(1). Operate and release time (without diode)
Tested sample: AGN2004H, 6 pcs.
6-(2). Operate and release time (with diode)
Tested sample: AGN2004H, 6 pcs.
7. Ambient temperature characteristics
Tested sample: AGN2004H, 6 pcs.
3
3
50
40
30
Operate time
Operate time
Release time
Release time
2.5
2.5
Max.
Max.
20
2
2
Drop-out
x
x
voltage
10
Min.
Max.
Min.
-40 -20
0
1.5
1.5
20 40
-10
60
80 100
Min.
1
Max.
1
Ambient temperature, °C
Pick-up
voltage
-20
-30
-40
-50
Min.
0.5
0.5
0
0
80
90
100 110 120
80
90
100 110 120
Coil applied voltage, %V
Coil applied voltage, %V
8. Malfunctional shock
Tested sample: AGN2004H
9-(1). Influence of adjacent mounting
Tested sample: AGN20012, 6 pcs.
9-(2). Influence of adjacent mounting
Tested sample: AGN20012, 6 pcs.
10
10
X
Deenergized condition
Energized condition
Z
X'
Y
Z'
ON
2
5
5
Y
1,000m/s
ON
ON
Y'
Pick-up voltage
0
Pick-up voltage
0
X
Z
2
2
2
ON
1,000m/s
1,000m/s
-5
-5
ON
ON
-10
10
-10
10
OFF
OFF
OFF
2
1,000m/s
Z'
1,000m/s
X'
5
0
5
0
Drop-out voltage
Drop-out voltage
2
1,000m/s
Y'
OFF
OFF
-5
-5
OFF
-10
0
-10
2
4
6
8
10 12
.079 .157 .236 .315 .394 .472
Inter-relay distance , mm inch
0
2
4
6
8
10 12
.079 .157 .236 .315 .394 .472
Inter-relay distance , mm inch
DIMENSIONS (mm inch))
Download CADData from our Web site.
1. PC board terminal
CAD Data
External dimensions
Standard type
PC board pattern
Schematic (Bottom view)
Single side stable
High sensitivity
1 coil latching
10.60 0.3
.417 .012
5.70 0.3
.224 .012
7.60
.299
3.20
.126
single side stable
3.20
.126
9.00 0.3
.354 .012
1
2
3
4
1
2
3
4
(0.50)
(.020)
3.50 0.3
.138 .012
2.20
.087
0.25 0.1
0.40 0.1
0.85 dia.
.033 dia.
2.20 0.15
.087 .006
3.20 0.15
.126 .006
.010 .004
8
7
6
5
8
7
6
5
.016 .004
Direction indication
Direction indication
3.20 0.15
.126 .006
(1.50)
(.059)
Tolerance: 0.1 .004
(Deenergized condition)
(Reset condition)
ds_61007_en_gn: 280114D
4
GN (AGN)
2. Surface-mount terminal
CAD Data
External dimensions
Single side stable/1 coil latching/High sensitivity single side stable
Suggested mounting pad (Tolerance: 0.1 .004)
Single side stable/1 coil latching/High sensitivity single side stable
Type
5.70 0.3
.224 .012
10.60 0.3
.417 .012
2.20
.087
3.20
.126
(0.50)
(.020)
9.00 0.3
Max. 10.00
.394
0.25 0.1
.010 .004
3.10
.122
.354 .012
A type
5.30
.209
3.20 0.15
.126 .006
0.40 0.1
2.20 0.15
.087 .006
3.20 0.15
.126 .006
.016 .004
0.80
.031
(1.50)
(.059)
7.40 0.3
.291 .012
5.70 0.3
.224 .012
10.60 0.3
.417 .012
2.20
.087
3.20
.126
(0.50)
(.020)
9.00 0.3
Max. 10.00
0.25 0.1
2.25
.089
.354 .012
S type
.394
.010 .004
4.45
.175
3.20 0.15
.126 .006
2.20 0.15
.087 .006
3.20 0.15
.126 .006
0.40 0.1
.016 .004
(1.50)
0.80
.031
5.70 0.3
(.059)
.224 .012
Schematic (Top view)
Single side stable
1 coil latching
High sensitivity single side stable
8
7
6
5
8
7
6
5
1
2
3
4
1
2
3
4
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
NOTES
1. Packing style
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
(S type)
2. Automatic insertion
(1)-2 Tape dimensions
Relay polarity bar
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
4.00
.157
10.70 0.2
.421 .008
0.40
.016
2.00
2.0 dia.
(Z type)
1.50+0.1 dia. .079
.059+0.004 dia.
1.75
.069
.079 dia.
0
Orientation (indicates PIN No.1)stripe
Chucking pressure in the direction A:
4.9 N {500gf} or less
11.50
.453
11.10
.437
24.00 0.3
.945 .012
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
GN relays
16.00
.630
6.3
Tape coming out.2d4ir8ection
Stopper (green)
Stopper (red)
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
General tolerance 0.1 mm .004 inch
(2) Dimensions of plastic peel
2) Tape and reel packing
(A type)
C
B
mm inch
A
(1)-1 Tape dimensions
mm inch
2.0
.079
Relay polarity bar
(Z type)
380 dia.
4.00
11.50
.453
1.50+0.1 dia.
21 dia.
.827 dia.
.157
13 dia.
.512 dia.
.059+0.004 dia.
14.961 dia.
1.75
.069
0
2.00
.079
0.40
.016
80 dia.
3.150 dia.
24.00 0.3
.945 .012
Please chuck the
portion.
11.10
.437
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
2.00 dia.
.079 dia.
16.00
.630
8.00
.315
10.70 0.2 GN relays
.421 .008
Tape coming out direction
General tolerance 0.1 mm .004 inch
For Cautions for Use, see Relay Technical Information.
ds_61007_en_gn: 280114D
5
相关型号:
AGN200A4HZ
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
PANASONIC
AGN200S03
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
PANASONIC
AGN200S03X
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.047A (Coil), 3VDC (Coil), 140mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, Random, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
AGN200S03Z
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
PANASONIC
AGN200S06
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
PANASONIC
AGN200S06Z
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
PANASONIC
©2020 ICPDF网 联系我们和版权申明