AGN260S24 [PANASONIC]
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case; 高灵敏度,具有100mW的标称工作功率,在一个紧凑和节省空间的情况下型号: | AGN260S24 |
厂家: | PANASONIC |
描述: | High Sensitivity, with 100mW nominal operating power, in a compact and space saving case |
文件: | 总5页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High Sensitivity, with
100mW nominal operating
power, in a compact and
space saving case
GN RELAYS (AGN)
FEATURES
1. Compact slim body saves space
Thanks to the small surface area of 5.7
mm × 10.6 mm .224 inch × .417 inch
and low height of 9.0 mm .354 inch,
the packaging density can be
close-together are minimized. This all
means a packaging density higher
than ever before.
6. Nominal operating power: 140 mW
7. Outstanding vibration and shock
resistance.
Functional shock resistance: 750 m/s2
Destructive shock resistance:
1,000 m/s2
increased to allow for much smaller
designs.
2. High sensitivity single side stable
type (Nominal operating power:
100mW) is available
3. Outstanding surge resistance.
Surge breakdown voltage between
contacts and coil:
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3.3 mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm .197 inch)
2,500 V 2×10 µs (Telcordia)
Surge breakdown voltage between
open contacts:
8. Sealed construction allows
automatic washing.
1,500 V 10×160 µs (FCC part 68)
4. The use of twin crossbar contacts
ensures high contact reliability.
AgPd contact is used because of its
good sulfide resistance. Adopting low-
gas molding material. Coil assembly
molding technology which avoids
generating volatile gas from coil.
5. Increased packaging density
Due to highly efficient magnetic circuit
design, leakage flux is reduced and
changes in electrical characteristics
from components being mounted
TYPICAL APPLICATIONS
1. Telephonic equipment
2. Telecommunications equipment
3. Security equipment
4. Test and Measurement equipment
5. Electronic Consumer and Audio
Visual equipment
RoHS compliant
ORDERING INFORMATION
AGN 2
0
Contact arrangement
2: 2 Form C
Operating function
0: Single side stable
1: 1 coil latching
6: High sensitivity single side
stable type
Type of operation
0: Standard type (B.B.M.)
Terminal shape
Nil: Standard PC board terminal
A: Surface-mount terminal A type
S: Surface-mount terminal S type
Nominal coil voltage (DC)
1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V
12: 12V 24: 24V
Packing style
Nil: Tube packing
X: Tape and reel packing (picked from 1/2/3/4 pin side)
Z: Tape and reel packing (picked from 5/6/7/8 pin side)
ASCTB13E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
TYPES
1. Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
High sensitivity single side stable
Part No.
Nominal coil voltage
1.5V DC
AGN2001H
AGN20003
AGN2004H
AGN20006
AGN20009
AGN20012
AGN20024
AGN2101H
AGN21003
AGN2104H
AGN21006
AGN21009
AGN21012
AGN21024
AGN2601H
3V DC
AGN26003
4.5V DC
AGN2604H
6V DC
AGN26006
9V DC
AGN26009
12V DC
24V DC
AGN26012
AGN26024
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2. Surface-mount terminal
1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
High sensitivity single side stable
Part No.
Nominal coil voltage
1.5V DC
3V DC
AGN200ꢀ1H
AGN200ꢀ03
AGN200ꢀ4H
AGN200ꢀ06
AGN200ꢀ09
AGN200ꢀ12
AGN200ꢀ24
AGN210ꢀ1H
AGN210ꢀ03
AGN210ꢀ4H
AGN210ꢀ06
AGN210ꢀ09
AGN210ꢀ12
AGN210ꢀ24
AGN260ꢀ1H
AGN260ꢀ03
4.5V DC
6V DC
AGN260ꢀ4H
AGN260ꢀ06
9V DC
AGN260ꢀ09
12V DC
24V DC
AGN260ꢀ12
AGN260ꢀ24
ꢀ: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2) Tape and reel packing
Nominal coil voltage
Single side stable
Part No.
1 coil latching
Part No.
High sensitivity single side stable
Part No.
1.5V DC
3V DC
AGN200ꢀ1HZ
AGN200ꢀ03Z
AGN200ꢀ4HZ
AGN200ꢀ06Z
AGN200ꢀ09Z
AGN200ꢀ12Z
AGN200ꢀ24Z
AGN210ꢀ1HZ
AGN210ꢀ03Z
AGN210ꢀ4HZ
AGN210ꢀ06Z
AGN210ꢀ09Z
AGN210ꢀ12Z
AGN210ꢀ24Z
AGN260ꢀ1HZ
AGN260ꢀ03Z
AGN260ꢀ4HZ
AGN260ꢀ06Z
AGN260ꢀ09Z
AGN260ꢀ12Z
AGN260ꢀ24Z
4.5V DC
6V DC
9V DC
12V DC
24V DC
ꢀ: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed.
RATING
1. Coil data
1) Single side stable type
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
3V DC
93.8mA
46.7mA
31mA
16Ω
64.2Ω
145Ω
257Ω
579Ω
1,028Ω
4.5V DC
6V DC
150%V of
nominal voltage
140mW
230mW
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
23.3mA
15.5mA
11.7mA
9V DC
12V DC
120%V of
nominal voltage
24V DC
9.6mA
2,504Ω
2) 1 coil latching type
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
3V DC
66.7mA
33.3mA
22.2mA
16.7mA
11.1mA
8.3mA
22.5Ω
90Ω
202.5Ω
360Ω
810Ω
1,440Ω
4,800Ω
4.5V DC
6V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
100mW
120mW
150%V of
nominal voltage
9V DC
12V DC
24V DC
5.0mA
*Pulse drive (JIS C 5442-1996)
ASCTB13E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
3) High sensitivity single side stable type
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
3V DC
66.7mA
33.3mA
22.2mA
16.7mA
11.1mA
8.3mA
22.5Ω
90Ω
202.5Ω
360Ω
810Ω
1,440Ω
4.5V DC
6V DC
150%V of
nominal voltage
100mW
120mW
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
9V DC
12V DC
120%V of
nominal voltage
24V DC
5.0mA
4,800Ω
*Pulse drive (JIS C 5442-1996)
2. Specifications
Characteristics
Item
Specifications
Arrangement
Initial contact resistance, max.
2 Form C
Contact
Max. 100 mΩ (By voltage drop 6 V DC 1A)
Contact material
Stationary contact: AgPd+Au clad Movable contact: AgPd
1 A 30 V DC, 0.3 A 125 V AC (resistive load)
30 W (DC), 37.5 V A (AC) (resistive load)
110 V DC, 125 V AC
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*1
Single side stable
1 A
Rating
10µA 10 mV DC
140mW (1.5 to 12 V DC), 230mW (24 V DC)
Nominal operating
power
High sensitivity single side
stable type
100mW (1.5 to 12 V DC), 120mW (24 V DC)
1 coil latching
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Insulation resistance (Initial)
Between open contacts
750 Vrms for 1min. (Detection current: 10mA)
1,500 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10×160µs) (FCC Part 68)
2,500 V (2×10µs) (Telcordia)
Breakdown voltage
(Initial)
Between contact and coil
Between contact sets
Between open contacts
Between contacts and coil
Surge breakdown
voltage (Initial)
Electrical
characteristics
Max. 50°C
Temperature rise (at 20°C 68°F)
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Functional
Shock resistance
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Min. 5 × 107 (at 180 cpm)
Min. 105 (1 A 30 V DC resistive), 105 (0.3 A 125 V AC resistive) (at 20 cpm)
Expected life
Ambient temperature:
(Single side stable, 1 coil latching type) –40°C to +85°C –40°F to +185°F
(High sensitivity single side stable type) –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions for operation, transport and storage*2
Max. operating speed (at rated load)
Conditions
Unit weight
20 cpm
Approx. 1 g .035 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
REFERENCE DATA
1. Max. switching capacity
2. Life curve
3. Mechanical life
Tested sample: AGN2004H, 15 pcs.
Operating speed: 180 cpm
100
4
DC resistive load
AC resistive load
3.5
Pick-up voltage
Drop-out voltage
Max.
Min.
50
40
1.0
3
2.5
2
30
DC 30V resistive load
20
Max.
Min.
1.5
1
0.3
AC 125V
resistive load
10
0
0.5
0
0
10
30
50
0.2
0.4
0.6
0.8
1.0
1.2
30
100
No. of operations, ×104
Contact voltage, V
Switching current, A
ASCTB13E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
4. Electrical life (1A 30V DC resistive load)
5. Coil temperature rise
Tested sample: AGN2004H, 6 pcs.
Operating speed: 20 cpm
Change of pick-up and drop-out voltage
Tested sample: AGN2004H, AGN20024, 6 pcs.
Point measured: Inside the coil
Ambient temperature: Room temperature
Change of contact resistance
100
100
70
N.C. contact
N.O. contact
4.5V DC type
90
80
70
60
50
40
24V DC type
90
60
80
Pick-up voltage
50
40
30
20
1 A
0 A
Max.
Min.
70
60
50
1 A
0 A
X
X
Drop-out voltage
40
Max.
Min.
30
20
10
0
30
20
10
0
10
0
0
5
10
0
5
10
100 110 120 130 140 150
Coil applied voltage, %
No. of operations, ×104
No. of operations, ×104
6-(1). Operate and release time (without diode)
Tested sample: AGN2004H, 6 pcs.
6-(2). Operate and release time (with diode)
Tested sample: AGN2004H, 6 pcs.
7. Ambient temperature characteristics
Tested sample: AGN2004H, 6 pcs.
50
40
30
3
3
Operate time
Operate time
Release time
Release time
2.5
2.5
Max.
Max.
20
Drop-out
2
2
x
x
voltage
10
Min.
Max.
Min.
-40 -20
0
1.5
1.5
20 40
-10
60
80 100
Min.
1
Ambient temperature, °C
Pick-up
voltage
Max.
1
-20
-30
-40
-50
Min.
0.5
0.5
0
0
80
90
100 110 120
80
90
100 110 120
Coil applied voltage, %V
Coil applied voltage, %V
8. Malfunctional shock
Tested sample: AGN2004H
9-(1). Influence of adjacent mounting
Tested sample: AGN20012, 6 pcs.
9-(2). Influence of adjacent mounting
Tested sample: AGN20012, 6 pcs.
10
10
X
Deenergized condition
Energized condition
Z
X'
Y
Z'
ON
5
5
2
ON
ON
Y
1,000m/s
Y'
Pick-up voltage
0
Pick-up voltage
0
X
Z
ON
2
2
-5
-5
1,000m/s
1,000m/s
ON
ON
-10
10
-10
10
OFF
OFF
OFF
2
2
5
0
5
0
1,000m/s
Z'
1,000m/s
X'
Drop-out voltage
Drop-out voltage
2
OFF
1,000m/s
Y'
OFF
-5
-5
OFF
-10
0
-10
0
2
4
6
8
10 12
.079 .157 .236 .315 .394 .472
Inter-relay distance , mm inch
2
4
6
8
10 12
.079 .157 .236 .315 .394 .472
Inter-relay distance , mm inch
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
1. PC board terminal
CAD Data
External dimensions
Standard type
PC board pattern
Schematic (Bottom view)
Single side stable
High sensitivity
1 coil latching
7.60
.299
10.60 0.3
.417 .012
5.70 0.3
.224 .012
3.20
3.20
.126
.126
single side stable
9.00 0.3
.354 .012
1
2
3
4
1
2
3
4
(0.50)
(.020)
3.50 0.3
.138 .012
2.20
0.25 0.1
0.40 0.1
0.85 dia.
.033 dia.
.087
8
7
6
5
8
7
6
5
2.20 0.15
.087 .006
3.20 0.15
.126 .006
.010 .004
.016 .004
Direction indication
Direction indication
(Reset condition)
3.20 0.15
.126 .006
(1.50)
(.059)
Tolerance: 0.1 .004
(Deenergized condition)
ASCTB13E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
2. Surface-mount terminal
CAD Data
External dimensions
Single side stable/1 coil latching/High sensitivity single side stable
Suggested mounting pad (Tolerance: 0.1 .004)
Type
Single side stable/1 coil latching/High sensitivity single side stable
5.70 0.3
.224 .012
10.60 0.3
.417 .012
2.20
.087
3.20
.126
(0.50)
(.020)
9.00 0.3
.354 .012
Max. 10.00
.394
0.25 0.1
.010 .004
3.10
.122
5.30
.209
A type
3.20 0.15
.126 .006
0.40 0.1
2.20 0.15
.087 .006
3.20 0.15
.126 .006
.016 .004
0.80
.031
(1.50)
(.059)
7.40 0.3
.291 .012
5.70 0.3
.224 .012
10.60 0.3
.417 .012
2.20
.087
3.20
.126
(0.50)
(.020)
9.00 0.3
.354 .012
2.25
.089
Max. 10.00
0.25 0.1
.010 .004
4.45
.175
S type
.394
3.20 0.15
.126 .006
2.20 0.15
.087 .006
3.20 0.15
.126 .006
0.40 0.1
.016 .004
(1.50)
0.80
.031
5.70 0.3
.224 .012
(.059)
Schematic (Top view)
Single side stable
1 coil latching
High sensitivity single side stable
8
7
6
5
8
7
6
5
1
2
3
4
1
2
3
4
Direction indication
Direction indication
(Reset condition)
(Deenergized condition)
NOTES
1. Packing style
(S type)
2. Automatic insertion
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
(1)-2 Tape dimensions
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Relay polarity bar
4.00
.157
10.70 0.2
.421 .008
0.40
.016
2.00
(Z type)
2.0 dia.
1.50+0.1 dia. .079
.059+0.004 dia.
1.75
.069
.079 dia.
0
11.50
.453
Orientation (indicates PIN No.1)stripe
24.00 0.3
.945 .012
11.10
.437
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
GN relays
16.00
6.3
.630
.248
Tape coming out direction
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
General tolerance 0.1 mm .004 inch
Stopper (green)
Stopper (red)
(2) Dimensions of plastic peel
C
B
2) Tape and reel packing
(A type)
mm inch
A
(1)-1 Tape dimensions
mm inch
2.0
.079
Relay polarity bar
(Z type)
380 dia.
4.00
11.50
.453
1.75
.069
1.50+0.1 dia.
0
21 dia.
.827 dia.
.157
13 dia.
.512 dia.
.059+0.004 dia.
14.961 dia.
2.00
.079
0.40
.016
80 dia.
3.150 dia.
Please chuck the
portion.
24.00 0.3
.945 .012
11.10
.437
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
2.00 dia.
.079 dia.
16.00
.630
8.00
.315
10.70 0.2 GN relays
.421 .008
Tape coming out direction
General tolerance 0.1 mm .004 inch
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
ASCTB13E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
相关型号:
AGN260S24X
Electromechanical Relay, DPDT, 36VDC (Coil), 1A (Contact), 110VDC (Contact), Random, AC/DC Output
PANASONIC
AGN260S24Z
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
PANASONIC
AGN260S4H
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
PANASONIC
AGN260S4HX
Electromechanical Relay, DPDT, 6.75VDC (Coil), 1A (Contact), 110VDC (Contact), Random, AC/DC Output
PANASONIC
AGN260S4HZ
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
PANASONIC
AGOF3S3-1.544MHZ
HCMOS Output Clock Oscillator, 1.544MHz Min, 19.44MHz Max, 1.544MHz Nom, WELDED, HERMETICALLY SEALED, DIP-4
CONNOR-WINFIE
AGOF3S3-12.800MHZ
HCMOS Output Clock Oscillator, 1.544MHz Min, 19.44MHz Max, 12.8MHz Nom, WELDED, HERMETICALLY SEALED, DIP-4
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明