AH18829 [PANASONIC]
Snap Acting/Limit Switch, SPDT, Momentary, 1A, 30VDC, 2.65mm, Solder Terminal, Hinge Lever Actuator, Through Hole-right Angle, ROHS COMPLIANT;
| 型号： | AH18829 |
| 厂家： | 
PANASONIC |
| 描述： | Snap Acting/Limit Switch, SPDT, Momentary, 1A, 30VDC, 2.65mm, Solder Terminal, Hinge Lever Actuator, Through Hole-right Angle, ROHS COMPLIANT 开关 光电二极管 |
| 文件： | 总5页 (文件大小：168K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ultra-miniature Size
Switches with High
Precision
AH1 (FJ)
SWITCHES
FEATURES
• Compact size, light weight and high precision
• Switches that can be used with M2 general-purpose
screws
• Integrally molded terminals that discourage inflow of
solder flux provide and also switch body has stand-off
• Lineup also includes low-level circuit types (Au-clad
contacts) optimized for low-voltage current loading
• Self-standing terminal easily mounted on PC boards
• Protection grade: IP40
Right angle terminal
TYPICAL APPLICATIONS
• Computer mouse
• Charger unit for portable terminal
• Electric pot
Left angle terminal
• Automobiles (Detection of key position), etc.
RoHS compliant
ORDERING INFORMATION
AH 1
Agency standard
9: UL/CSA
Operation load
Actuator
Actuator
Contact
Mounting hole and terminal
4: Self-standing PC board
terminal
5: Straight PC board terminal
6: Solder terminal
7: Right angle terminal
8: Left angle terminal
Nil: AgNi alloy contact
61: AgNi alloy + Au-clad contact
5th digit of
part No.
0: Pin plunger
2: Hinge lever
4: Simulated roller lever
6
8
1.47N 0.74N
0.49N 0.25N
0.54N 0.26N
Pin plunger
Hinge lever
Simulated roller lever
PRODUCT TYPES TABLE
COMBINATION WITH OPERATING
FORCE (OF) AND APPLICABLE
CURRENT RANGE (reference)
■ Mounting hole M2 mm type (with stand off)
Available
Operating Force OF (max.)
0.74N
1.47N
Applicable current range
1mA 0.1A 1A 3A
Contact
specification
3A
AgNi alloy
contact
Standard type
(AgNi alloy
contact)
1A
OF0.74N OF1.47N
100mA
Low-level circuit
type
(AgNi alloy +
Au-clad contact)
Au-clad contact
1mA
0
DC 5V
AC 5V
15V
15V
30V
125V
Note) OF: Value of pin plunger
AECTB15E 201408-T
–1–
AH1 (FJ) Miniature Switches
DATA
CONTACT FORM
Range of low-level current and voltage (Low-level circuit type)
(reference)
500
100
50
NC
NO
COM
10
5
2
1
4
8
12
16
20
24
DC voltage (V)
PRODUCT TYPES
Standard type; Body: black, Cap: black, Plunger: white
Low-level circuit type; Body: black, Cap: black, Plunger: red
■ Self-standing PC board terminal
Standard type
(AgNi alloy contact)
Low-level circuit type
(AgNi alloy + Au-clad contact)
Operating Force OF,
Actuators
Max.
Contact form: SPDT
AH14809
Contact form: SPDT
AH1480619
AH1460619
AH1482619
AH1462619
AH1484619
AH1464619
0.74 N
Pin plunger
1.47 N
AH14609
0.25 N
AH14829
Hinge lever
0.49 N
AH14629
0.26 N
Simulated roller lever
AH14849
0.54 N
AH14649
■ Straight PC board terminal
Standard type
(AgNi alloy contact)
Low-level circuit type
(AgNi alloy + Au-clad contact)
Operating Force OF,
Actuators
Max.
Contact form: SPDT
AH15809
Contact form: SPDT
AH1580619
AH1560619
AH1582619
AH1562619
AH1584619
AH1564619
0.74 N
Pin plunger
1.47 N
AH15609
0.25 N
AH15829
Hinge lever
0.49 N
AH15629
0.26 N
Simulated roller lever
AH15849
0.54 N
AH15649
■ Solder terminal
Standard type
(AgNi alloy contact)
Low-level circuit type
(AgNi alloy + Au-clad contact)
Operating Force OF,
Actuators
Max.
Contact form: SPDT
AH16809
Contact form: SPDT
AH1680619
AH1660619
AH1682619
AH1662619
AH1684619
AH1664619
0.74 N
Pin plunger
1.47 N
AH16609
0.25 N
AH16829
Hinge lever
0.49 N
AH16629
0.26 N
Simulated roller lever
AH16849
0.54 N
AH16649
■ PC board right angle terminal
Standard type
(AgNi alloy contact)
Low-level circuit type
(AgNi alloy + Au-clad contact)
Operating Force OF,
Actuators
Max.
Contact form: SPDT
AH17809
Contact form: SPDT
AH1780619
AH1760619
AH1782619
AH1762619
AH1784619
AH1764619
0.74 N
Pin plunger
1.47 N
AH17609
0.25 N
AH17829
Hinge lever
0.49 N
AH17629
0.26 N
Simulated roller lever
AH17849
0.54 N
AH17649
AECTB15E 201408-T
–2–
AH1 (FJ) Miniature Switches
■ PC board left angle terminal
Standard type
(AgNi alloy contact)
Low-level circuit type
(AgNi alloy + Au-clad contact)
Operating Force OF,
Actuators
Max.
Contact form: SPDT
AH18809
Contact form: SPDT
AH1880619
AH1860619
AH1882619
AH1862619
AH1884619
AH1864619
0.74 N
1.47 N
0.25 N
0.49 N
0.26 N
0.54 N
Pin plunger
AH18609
AH18829
Hinge lever
AH18629
AH18849
Simulated roller lever
AH18649
Notes: 1. The appearance of right and left angle types are as below.
Right angle
Left angle
2. Standard packing: 50 pcs./tube.
SPECIFICATIONS
■ Contact rating
Standard rating
Minimum rating
—
Standard type
(AgNi alloy contact)
Plunger color: White
OF 0.74N type
OF 1.47N type
1A 125V AC, 1A 30V DC
3A 125V AC, 2A 30V DC
—
Low-level circuit type (AgNi alloy + Au-clad contact)
Plunger color: Red
0.1A 125V AC, 0.1A 30V DC
5mA 6V DC, 2mA 12V DC, 1mA 24V DC
■ Characteristics
Standard type
(AgNi alloy contact)
Low-level circuit type
(AgNi alloy + Au-clad contact)
Item
OF 0.74 N type: Min. 106 (at 60 cpm)
Mechanical life (OT: Specified value)
Expected
OF 1.47 N type: Min. 5 × 105 (at 60 cpm)
Min. 3 × 104
Min. 105
life
Electrica (OT: Max.)
(at 20 cpm) (at rated load)
(at 20 cpm) (at rated load)
Insulation resistance
Min. 100 MΩ (at 500V DC)
Between non-continuous terminals
600 Vrms for 1 min.
Dielectric
strength
Between each terminal and other exposed
metal parts
1,500 Vrms for 1 min.
1,500 Vrms for 1 min.
Between each terminal and ground
Max. 30 mΩ
(by voltage drop, 1A 6 to 8V DC)
Max. 100 mΩ
(by voltage drop, 0.1A 6 to 8V DC)
Contact resistance (Initial)
Vibration resistance (Pin pluger type)
Shock resistance (Pin plunger type)
Allowable operating speed (No load)
Max. operating cycle rate (No load)
Ambient temperature
10 to 55 Hz at single amplitude of 0.75mm (Contact opening: Max. 1 msec.)
Min. 294 m/s2 (Contact opening: Max. 1 msec.)
1 to 500 mm/sec.
120 cpm
–25 to +85°C (no freezing and condensing)
Unit weight
Approx. 0.5g
IP40
Protection grade
Notes: 1. Test conditions and judgement are in accordance with NECA C 4505.
2. OF: Value of pin plunger type
■ Operating characteristics
1) Pin plunger
3th digit of
Part No.
Operating Force OF,
Max.
Release Force RF,
Min.
Pretravel PT,
Max.
MovementDifferential
MD, Max.
Overtravel OT,
Min.
Operating Position OP
7 0.3 mm
(Distance from stand-off)
5.5 0.2 mm
6
1.47 N
0.74 N
0.20 N
(Distance from mounting hole)
0.5 mm
0.12 mm
0.25mm
7 0.3 mm
(Distance from stand-off)
5.5 0.2 mm
8
0.098 N
(Distance from mounting hole)
2) Hinge lever
3th digit of
Part No.
Operating Force OF,
Max.
Release Force RF,
Min.
Pretravel PT,
Max.
MovementDifferential
MD, Max.
Overtravel OT,
Min.
Operating Position OP
8.3 1.2 mm
(Distance from stand-off)
6.8 1.0 mm
6
8
0.49 N
0.25 N
0.049 N
0.025 N
(Distance from mounting hole)
2.1 mm
0.5 mm
0.55 mm
8.3 1.2 mm
(Distance from stand-off)
6.8 1.0 mm
(Distance from mounting hole)
AECTB15E 201408-T
–3–
AH1 (FJ) Miniature Switches
3) Simulated roller lever
3th digit of
Part No.
Operating Force OF,
Max.
Release Force RF,
Min.
Pretravel PT,
Max.
MovementDifferential
MD, Max.
Overtravel OT,
Min.
Operating Position OP
11.0 1.2 mm
(Distance from stand-off)
9.5 1.0 mm
6
8
0.54 N
0.26 N
0.039 N
0.020 N
(Distance from mounting hole)
2.1 mm
0.5 mm
0.5 mm
11.0 1.2 mm
(Distance from stand-off)
9.5 1.0 mm
(Distance from mounting hole)
DIMENSIONS
(Unit: mm) General tolerance: 0.25
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
■ Self-standing PC board terminal
Pin plunger
External dimensions
PC board pattern
CAD Data
0.3
(PT)
0.5 max.
5.4
2.8
1
3-1.2 0.05 dia.
0.1
0.1
5.08
5.08
(OP)
0.2
5.5
0.15
0.1
5
(OP)
0.3
7
2 +0.12
0
1.6
Pretravel PT, Max.
0.5 mm
1.5
2+0.12dia.
0.12
0.12
1.1
1.1
0
4
2.2+0.12
Movement Differential MD, Max.
Overtravel OT, Min.
0.12 mm
0.25 mm
0
6-C0.3
0.1
t=0.4
1.25
6.5
0.12
0.9
Distance from
5.5 0.2 mm
7 0.3 mm
0.15
0.15
5.08
5.08
0.15
6
mounting hole
Operating
Position OP
0.15
12.8
Distance from
stand-off
Hinge lever
External dimensions
PC board pattern
CAD Data
(PT)
2.1 max.
4.4
3-1.2 0.05 dia.
0.1
0.1
5.08
5.08
(OP)
1.0
6.8
0.15
5
(OP)
1.2
8.3
2 +0.12
Pretravel PT, Max.
2.1 mm
0.5 mm
0.55 mm
0
1.6
Movement Differential MD, Max.
Overtravel OT, Min.
0.1
1.5
2+0.12dia.
0.12
0.12
0
1.1
1.5
2.2+0.12
4
0
Distance from
mounting hole
6.8 1.0 mm
8.3 1.2 mm
6-C0.3
0.1
6.5
t=0.4
1.25
Operating
Position OP
0.9
0.12
0.15
0.15
5.08
5.08
Distance from
stand-off
0.15
6
0.15
12.8
Simulated roller lever
External dimensions
PC board pattern
CAD Data
(PT)
2.1 max.
0.4
3.3
0.3
5.4
3-1.2 0.05 dia.
0.1
0.1
5.08
5.08
1.2
R2.5
11
(OP)
1.0
9.5
0.15
5
2 +0.12
Pretravel PT, Max.
2.1 mm
0.5 mm
0.5 mm
0
1.6
Movement Differential MD, Max.
Overtravel OT, Min.
0.1
1.5
2+0.12dia.
0.12
0.12
0
1.1
1.5
2.2+0.12
4
0
Distance from
mounting hole
6-C0.3
9.5 1.0 mm
0.1
6.5
t=0.4
1.25
Operating
Position OP
0.9
0.12
0.15
0.15
5.08
5.08
Distance from
stand-off
0.15
6
11.0 1.2 mm
0.15
12.8
AECTB15E 201408-T
–4–
AH1 (FJ) Miniature Switches
■ Solder terminal
Pin plunger
CAD Data
2.0+0.12
0
0.1
1.5
5.0
2.0
0.5
6-C0.3
2.2+0.12
2+0.12 dia.
0
0
t=0.4
2.2
0.1
1.2
6.5
0.15
0.15
5.08
5.08
0.15
12.8
(Dimensions other that drawn above is same as self-standing PC board terminal.)
■ PC board right/left angle terminal
Pin plunger
External dimensions
PC board pattern
CAD Data
3-1.2 0.05 dia.
C0.3
Right angle
2.93
5.08
(Position of pin plunger)
0.1
0.15
10.16
Left angle
Pin
plunger
(PT)
0.5 max.
0.3
5.4
1
2.8
(OP)
0.15
0.2
5
5.5
2+0.12
0
(3.3)
0.1
1.5
1.6
3.1 t=0.4
2+0.12 dia.
2.2+0.12
0
0
0.15
6
0.1
6.5
0.9
0.15
0.15
5.08
5.08
Left angle
Right angle
0.15
12.8
Note: As for other actuator types, dimensions are the same as those of corresponding self-standing PC board terminal.
CAUTIONS FOR USE
■ Fastening of the switch body
1) Use M2 screws to attach switches with
Max. 0.098 N·m torque. Use of screw
washers or adhesive lock is
■ Selection of switch
■ Environment
Please make your selection so that there
will be no problems even if the operating
characteristics vary up to 20% from the
standard values.
■ Soldering operation
Manual soldering should be
accomplished within 3 seconds with max.
350°C iron.
Care should be taken not to apply force
to the terminals during soldering.
■ When switching low-level current
and voltage, low-level circuit type (Au-
clad contact) is recommended.
Locations where corrosive gases having
a bad influence on contacts are present,
and locations where there is an
excessive amount of siliceous or other
abrasive dust should be avoided.
recommended.
2) When the operation object is in the
free position, force should not be applied
directly to the actuator or to the pin
plunger. Also force should be applied to
the pin plunger from vertical direction to
the switch.
3) In setting the movement after
operation, the overtravel “OT”should be
set from 70% to 100%. Setting the
movement less than 70% may cause
degrading of the electrical mechanical
performance.
AECTB15E 201408-T
–5–
相关型号：
AH188461
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 2.6mm, Solder Terminal, Simulated Roller Lever Actuator, Through Hole-right Angle
PANASONIC
©2020 ICPDF网 联系我们和版权申明