AJ8211L [PANASONIC]
Rocker Switch, DPST, Off-on, Solder Lug Terminal, Rocker Actuator, Panel Mount;型号: | AJ8211L |
厂家: | PANASONIC |
描述: | Rocker Switch, DPST, Off-on, Solder Lug Terminal, Rocker Actuator, Panel Mount 开关 |
文件: | 总6页 (文件大小:274K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
J8(AJ8)
J8 (AJ8)
SWITCHES
POWER ROCKER SWITCH
FEATURES
J8 switch standard actuator
1. Power rocker switches for the re-
quire of safety.
3. Operation that only requires a light
touch
• All versions comply with ClassII
EN61058-1 insulation grade.
Insulation distance: 8mm Min.
Contact gap: 3mm Min.
• International Standard-approved sta-
tus
The best operation characteristics was
sought by analyzing touch data gathered
by monitoring 1,500 people.
• Power Rocker Switch touch curve
J8 switch Wide actuator
As of Jul. 1999
Already approved
UL, CSA, VDE, TÜV,
Standard
BEAB, ÖVE, KEMA,
actuator
SEMKO, NEMKO,
type
DEMKO, FIMKO, SEV
J8
switch
UL, CSA, VDE, TÜV,
Wide
SEMKO, NEMKO,
actuator
DEMKO, FIMKO, SEV,
type
Stroke
KEMA, ÖVE
4. A broad product line
2. High inrush current resistance is
ideal for office automation equipment.
The J8 switches are available with five dif-
ferent types of pins:quick-connect termi-
nals, soldering terminals, PC board
terminals, right angle terminals and left
angle terminals.
Contact
rating
Expected
life
Type
J8
Inrush
160A 16A 250V AC
Min.104
5. Eight standard actuator colors
White, black, red, dark gray, light gray,
blue, green, yellow
6. We can handle special orders with
specific colors and indications.
CONSTRUCTION
Actuator
Case
Snap-in Clip
Contact gap (more than 3mm .118inch)
The EN60950 (intended for office automation equipment)
conforms with a 3mm .118inch gap.
When directly opening or closing the primary power supply side,
a contact gap of at least 3mm .118inch is required in order to
ensure safety.
19
J8(AJ8)
ORDERING INFORMATION
Ex. AJ8
W
1
0
0
W
W
T
Type of
switch
Size of handle
Poles
Terminal shape
Actuator indication Actuator color*
W: White
Flang color*
Insulation guard
AJ7: J8
Nil: Standard size 1: Single pole 0: .250 Quick-
Nil: Black
(W: White)
(R: Red)
(Z: Dark gray)
(H: Light gray)
(L: Blue)
(G: Green)
(Y: Yellow)
Nil: Short guard
type
switch
(10 mm
.394inch)
W: Wide size
(19 mm
2: Double pole
connect terminal
1: Soldering
terminal
2: PC board
terminal
3: PC board right
andle terminal
4: PC board left
angle terminal
0:
1:
2:
B: Black
R: Red
T: Long guard
type (.250
Quick-connect
terminal and
soldering
terminal of
standard size
only)
Z: Dark gray
H: Light gray
L: Blue
G: Green
Y: Yellow
O
.748 inch)
O
I
Remarks: 1. Please consult us for details concerning different flange colors.
2. “IO” is engraved on all flanges.
3. The color of IO indication on the actuator:
• White actuator: black
• Others: white
PRODUCT TYPES
1. Standard actuator type
(1) Without indication on actuators
Terminal shape
Poles
Operating types
Without indication
AJ8100*
AJ8200*
AJ8110*
AJ8210*
AJ8120*
AJ8220*
AJ8130*
AJ8230*
AJ8140*
AJ8240*
Single pole
Double pole
Single pole
Double pole
Single pole
Double pole
Single pole
Double pole
Single pole
Double pole
.250 Quick-connect terminal
Soldering terminal
PC board terminal
ON-OFF
PC board right angle terminal
PC board left angle terminal
(2) With | O indication on actuators
Terminal shape
Poles
Operating types
With | O indication
AJ8101*
With — O indication
AJ8102*
Single pole
Double pole
Single pole
Double pole
Single pole
Double pole
Single pole
Double pole
Single pole
Double pole
.250 Quick-connect terminal
Soldering terminal
AJ8201*
AJ8202*
AJ8111*
AJ8112*
AJ8211*
AJ8212*
AJ8121*
AJ8122*
PC board terminal
ON-OFF
AJ8221*
AJ8222*
AJ8131*
AJ8132*
PC board right angle terminal
PC board left angle terminal
AJ8231*
AJ8232*
AJ8141*
AJ8142*
AJ8241*
AJ8242*
(Standard flange color is black. For other colors type, they are custom ordered.)
Remarks: 1. A letter indicating the actuator color is entered in place of * symbol. (W: White B: Black R: Red Z: Dark gray H: Light gray L: Blue G: Green
Y:Yellow)
For requests of other flange color,please suffix following letter. (W: White R: Red Z: Dark gray H: Light gray L: Blue G: Green Y:Yellow)
2. Long guard type is available for .250 Quick-connect terminal and soldering terminal type.
When ordering, please suffix T.
3. The color of | O indication on the actuator:
White actuator: black Others: white
4. They come with a stamp indicating international standards without your request.
5. Note that the position of the | mark on the flange is used as a reference for left angle and right angle units as shown in the diagram below.
I mark
I mark
Right angle terminal
Left angle terminal
20
J8(AJ8)
2.Wide actuator type
(1) Without indication on actuators
Terminal shape
Poles
Operating types
ON-OFF
Without indication
AJ8W100*
AJ8W200*
AJ8W110*
AJ8W210*
AJ8W120*
AJ8W220*
Single pole
Double pole
Single pole
Double pole
Single pole
Double pole
.250 Quick-connect terminal
Soldering terminal
PC board terminal
(2) With | O indication on actuators
Terminal shape
Poles
Operating types
ON-OFF
With | O indication
With — O indication
Single pole
Double pole
Single pole
Double pole
Single pole
Double pole
AJ8W101*
AJ8W201*
AJ8W111*
AJ8W211*
AJ8W121*
AJ8W221*
AJ8W102*
AJ8W202*
AJ8W112*
AJ8W212*
AJ8W122*
AJ8W222*
.250 Quick-connect terminal
Soldering terminal
PC board terminal
(Standard flange color is black. For other colors type, they are custom ordered.)
Remarks: 1. A letter indicating the actuator color is entered in place of * symbol. (W: White B: Black R: Red Z: Dark gray H: Light gray L: Blue G: Green
Y:Yellow)
For requests of other flange color,please suffix following letter. (W: White R: Red Z: Dark gray H: Light gray L: Blue G: Green Y:Yellow)
2. The color of | O indication on the actuator:
White actuator: black Others: white
3. They come with a stamp indicating international standards without your request.
SPECIFICATIONS
1. Contact rating
Motor load
Resistive load
(cos φ ] 1.0)
Type
Voltage
(EN61058-1)
(cos φ ] 0.6)
J8 switch
AC 250V
16A
4A
Remark: The motor load is in accordance with EN61058-1. Inlush current can be switched up to the value of 6 times the indicated rating.
2. Characteristics
Min. 5 × 104
(at 20 cpm.)
Mechanical
Expected life
(Min. operations)
Min. 104
(at 7 cpm., at rated load)
Electrical
Initial insulation resistance
(Between terminals)
Min. 100 MΩ
(at 500V DC measured by insulation resistive meter)
Initial breakdown voltage
(Between terminals)
2,000 Vrms detection current: 10 mA
Initial contact resistance
(By voltage drop at 1A, 2 to 4V DC)
Max. 100mΩ
at 6 × 103 ope. or less
from 6 × 103 ope. to 104
Max. 30°C (UL1054)
Temperature rise
Max. 55°C (VDE0630)
Vibration resistance
Shock resistance
10 to 55 Hz at double amplitude of 1.5mm
Min. 490m/s2{50 G}
40 N {4.08kgf} for 1 minute
(operating direction)
Actuator strength
100 N {10.2kgf} for 1 minute or more
(Pull & push direction)
Tensile terminal strength
–25°C to +85°C
Ambient temperature
– 13 ° F to +185 ° F
(Not freezing below 0°C 32 ° F )
Ambient humidity
Flame retardancy
Tracking resistance
Max. 85%R.H.
UL94V-0
Min. 175
Single pole
Double pole
2.45 ± 1.47N {0.25 ±0.15kgf}
4.5 ± 2.5N {0.46 ±0.25kgf}
Operating force
(reference characteristics)
Remark: Test conditions are in accordance with EN61058-1, UL1054 and JIS C 6571.
21
J8(AJ8)
mm inch General tolerance ±0.5 ±.020
DIMENSIONS
1) .250 Quick-connect terminal/Short guard type
Long guard type
Diagram of recommended
.250 Quick-connect terminal
locations for panel
mounting holes
30
1.181
Double pole Single pole
X
32±4 deg
15
7.7
.591
.303
12.8
.504
10
.394
12.9−+00.1
30
1.181
.508−+.0004
ON
OFF
2
.079
16
.630
32±4 deg
7.7
.303
4.4
.173
ON
OFF
10.6 11
.417 .433
2
.079
16
.630
Panel thickness
X
19.5
.768
+0
6.35
.250
0.75 to 1.25
.030 to .049
28.2
1.110
–0.1
φ1.75
φ.069
15
+0
.591
–.004
4.4
28
1.102
10.6
.417
.173
+0
1.25 to 2
.049 to .079
28.4
1.118
–0.1
+0
–.004
φ1.75
φ.069
0.8
.031
6.35
.250
+0
15
8.75
.344
12.5
.492
4.375
.172
2 to 3
.079 to .118
28.8
1.134
–0.1
+0
.591
–.004
28
1.102
2) Soldering terminal
Long guard type
Soldering terminal
Diagram of recommended
locations for panel
mounting holes
30
1.181
Double pole Single pole
X
32±4 deg
15
7.7
.591
.303
12.8
.504
10
.394
12.9−+00.1
.508−+.0004
30
1.181
ON
OFF
2
.079
16
.630
32±4 deg
7.7
.303
ON
OFF
10.6 11
.417 .433
2
.079
16
.630
Panel thickness
X
19.5
.768
+0
2.5
0.75 to 1.25
.030 to .049
28.2
1.110
3.5
.138
–0.1
+0
.098
–.004
15
.591
28
1.102
10.6
.417
+0
1.25 to 2
.049 to .079
28.4
1.118
–0.1
+0
–.004
0.8
2.5
3.5
.138
.031
8.75
+0
.098
4.375
2 to 3
.079 to .118
28.8
1.134
–0.1
+0
15
.591
28
1.102
.344
.172
–.004
12.5
.492
3) PC board terminal
PC board pattern
Diagram of recommended locations for
panel mounting holes
Double pole
Single pole
15±0.1
.591±.004
3±0.2
X
1.2±0.1
15±0.1
.591±.004
3±0.2
.047±.004
.118±.008
1.2±0.1
.047±.004
12.9−+00.1
.508−+.0004
.118±.008
8.75±0.1
.344±.004
4.375±0.1
.172±.004
Double pole Single pole
15
.591
12.8
30
1.181
.504
10
.394
32±4 deg
7.7
.303
ON
OFF
Panel thickness
X
2
.079
16
.630
+0
0.75 to 1.25
.030 to .049
28.2
1.110
19.5
.768
–0.1
+0
–.004
+0
1.25 to 2
.049 to .079
28.4
1.118
–0.1
+0
(7.5)
(.295)
–.004
2
4
.157
+0
.079
15
2 to 3
.079 to .118
28.8
1.134
–0.1
+0
0.8
4.375
.031
.172
8.75
–.004
.591
.344
12.5
.492
28
1.102
22
J8(AJ8)
4) PC board right angle terminal
mm inch General tolerance ±0.5 ±.020
PC board pattern
Diagram of recommended locations for
panel mounting holes
Double pole
Single pole
15±0.1
.591±.004
3±0.2
X
1.2±0.1
15±0.1
.591±.004
3±0.2
.047±.004
12.9−+00.1
17.5±0.3
.508−+.0004
.689±.012
.118±.008
1.2±0.1
.047±.004
.118±.008
8±0.1
.315±.004
21.0±0.3
Terminal side
.827±.012
4.375±0.1
.172±.004
Double pole
Single pole
15
.591
12.8
.504
10
.394
30
1.181
32°±4
7.7
.303
ON
OFF
Panel thickness
X
2
.079 16
.630
+0
19.5
.768
2
.079
0.75 to 1.25
.030 to .049
28.2
1.110
–0.1
+0
–.004
+0
1.25 to 2
.049 to .079
28.4
1.118
–0.1
+0
8
.315
0.8
.031
–.004
+0
28
1.102
4
.157
12.5
.492
2 to 3
.079 to .118
28.8
1.134
–0.1
+0
–.004
Remark: Left angle terminals type is also available.
5) Wide actuator type
Diagram of recommended locations for
panel mounting holes
22.0−+00.1
.866−+.0004
Double pole
Single pole
X
25
.984
21.8
.858
19
.748
32
1.260
Panel thickness
X
32°±4
+0
7.7
.303
1 to less than 1.8
.039 to .071
30.0
1.181
–0.1
+0
–.004
+0
1.8 to 2.3
.071 to .091
30.7
1.209
–0.1
+0
ON
OFF
–.004
2
.079
16
19.5
.768
Remark: Dimensions for the terminals of sol-
dering terminal type and PC board terminal
type are the same as those of standard size
type.
.630
4.4
.173
10.6
.417
0.8
.031
φ1.75
φ.069
6.35
.250
8.75
.344
21
15
4.375
.172
.591
29.4
1.157
.827
23
J8(AJ8)
NOTES
1. Switch mounting
3. Resistance to chemicals
Mount the switch with the hole cutting di-
mensions shown in the dimensions.
Contact us if you are considering using a
panel of other than the recommended size
and shape.
To clean the switch unit, use a neutral de-
tergent diluted with water.
Do not use acidic or alkaline solvents as
they may damage the switch.
Furthermore, be careful not to get any of
the detergent solution inside of the switch
while cleaning it.
Soldering position
When wrapping or soldering a wire
around a terminal, do so in the shaded
area indicated in the diagram at left.
2. Regarding fastening lead wires to
terminals
Contact terminal and ground terminal
1) When connecting the tab terminals, use
a .250 Quick-connect and insert the termi-
nals straight in.
If they are skewed, the terminals will re-
quire excessive insertion force.
In addition, there is some variation in the
insertion force required for different recep-
tacles from different manufacturers, so
confirm how much force is needed under
actual conditions.
Do not solder wires onto tab terminals.
2) With manual soldering: Complete the
soldering connection work within 3 sec-
onds with the tip of the soldering iron (60W
soldering iron) at a temperature of 420°C
788°F or lower, and take care not to apply
any force to the terminal area.
4. Environment
Refer to the diagram above, "soldering po-
sition," for details on the position where a
wire should be soldered to a terminal.
When soldering PC board terminals, keep
soldering time to within 5 sec. at 270°C
518°F soldering bath or within 3 sec. at
350°C 662°F soldering bath.
3) The terminals should be connected in
such a way that they are not under con-
stant stress from the connecting wires.
4) Terminal material is copper alloy which
may discolor due to finger's oil or after long
time. But that discoloration does not effect
actual performance.
Avoid using and storing these switches in
a location where they will be exposed to
corrosive gases, silicon, or high dust lev-
els, all of which can have an adverse effect
on the contacts.
5.Take care not to drop the product as
it may impair perfomance.
It should be avoided to touch the switch
with soldering iron.
REFERENCE
1. Outline of UL1054 test
2. Outline of EN61058-1 test
After switching 5 × 10 times on the above
Overload test J8: 20A 250V AC
(Power factor 0.75 to 0.8)
50 operation
Endurance test J8: 16A 250V AC
(Power factor 0.75 to 0.8)
6×103operation
+41
load condition at both 85+5°C 185 °F and
+32
0
25±10°C 77±50°F, temperature rise of
terminals should be less than 55°C 131°F
and no abnormality should be observed in
characteristics.
After testing, temperature rise of termi-
50 to 100ms
nals should be less than 30°C 86°F and
no abnormality should be observed in
characteristics.
24A
AC: 250V
(Power factor 0.6)
J8: 16A
2 sec.
4 sec.
INTRODUCTION TO 4P CONNECTORS FOR THE J8 SWITCH (produced by Nip-
pon Tanshi co.,Ltd)
Suitable switches: J8 switch, .250
Quick-connect terminal
(Note: Terminal guard long type switches
are not suitable for this connector.)
Housing
Product number: N1620-4204
Receptacle
Product number: 17168-2 (post-plated
Connectors for
J8 switch
product for fine wires)
17168-M2 (material plated product for fine
wires)
172131-M2 (for thick wires)
Notes) This J8 switch connector is not
available from Matsushita Electric Works.
Contact us for further details on this con-
nector.
12/1/2002
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog
©2020 ICPDF网 联系我们和版权申明