AJ911002W9 [PANASONIC]
Rocker Switch, SPST, On-off, Quick Connect Terminal, Rocker Actuator, Panel Mount;
| 型号： | AJ911002W9 |
| 厂家： | 
PANASONIC |
| 描述： | Rocker Switch, SPST, On-off, Quick Connect Terminal, Rocker Actuator, Panel Mount 开关 |
| 文件： | 总6页 (文件大小：193K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
J9(AJ9)
J9 (AJ9)
POWER ROCKER SWITCH
FEATURES
SWITCHES
J9 switch snap-in mounting type
4. Eight standard actuator colors
White, black, red, dark gray, light gray,
blue, green, yellow
1. Power rocker switches for the re-
quire of safety.
• All versions comply with ClassII
EN61058-1 insulation grade.
Insulation distance: 8mm Min.
Contact gap: 3mm Min.
• International Standard-approved sta-
tus
5. We can handle special orders with
specific colors and indications.
As of Jul. 1999
Already approved
J9 switch screw mounting type
UL, CSA, VDE, TÜV,
SEMKO, NEMKO,
FIMKO
J9 switch
2. High inrush current resistance is
ideal for office automation equipment.
Expected
Type Inrush Contact rating
life
J9
100A
16A 250V AC
Min.104
3. Operation that only requires a light
touch
The best operation characteristics was
sought by analyzing touch data gathered
by monitoring 1,500 people.
• Power Rocker Switch touch curve
Stroke
CONSTRUCTION
Actuator
Case
Snap-in Clip
Dustproof construction
Contact gap (more than 3mm .118inch)
The EN60950 (intended for office automation equipment)
conforms with a 3mm .118inch gap.
When directly opening or closing the primary power supply side,
a contact gap of at least 3mm .118inch is required in order to
ensure safety.
25
J9(AJ9)
ORDERING INFORMATION
Ex. A9
1
1
0
0
0
W
W
3
Type of
switch
Operating
type
Actuator
indication
Actuator
color
Approved
standard
Poles
Mounting type
Terminal shape
Flang color
AJ7: J9
: Single pole : Snap-in
: ON-OFF .250 Quick-
connect terminal
W: White
B: Black
R: Red
Z: Dark gray
H: Light gray
L: Blue
G: Green
Y: Yellow
Nil: Black
(W: White)
(R: Red)
(Z: Dark gray) UL·CSA
(H: Light gray)
(L: Blue)
·
SEMKO
switch : Double pole mounting (16A) 1ON-ON
: Screw
mounting
:
Soldering
compatible with
.250 Quick-
connect terminal
: PC board
terminal
O
:
O
I
(G: Green)
(Y: Yellow)
Remarks: 1. Please consult us for details concerning different flange colors.
2. The color of IO indication on the actuator:
• White actuator: black
• Others: white
3. Add a “3” at the end of the part number for products that have been certified under the international standards (simultaneously marked
products).
Add a “9” at the end of the part number for products that have received UL and CSA certification (simultaneously marked products).
PRODUCT TYPES
1. Snap-in mounting type
(1) Without indication on actuators
Terminal shape
Poles
Operating types
ON-OFF
ON-ON
Without indication
AJ911000*9
AJ911100*3
AJ921000*9
AJ921100*3
AJ911010*9
AJ911110*3
AJ921010*9
AJ921110*3
AJ911020*9
AJ911120*3
AJ921020*9
AJ921120*3
Single pole
.250 Quick-connect terminal
ON-OFF
ON-ON
Double pole
Single pole
Double pole
Single pole
Double pole
ON-OFF
ON-ON
Soldering/.250 Quick-connect terminal
PC board terminal
ON-OFF
ON-ON
ON-OFF
ON-ON
ON-OFF
ON-ON
(2) With | O indication on actuators
Terminal shape
Poles
Operating types
ON-OFF
ON-ON
With | O indication
With — O indication
AJ911002*3
AJ911102*3
AJ921002*3
AJ921102*3
AJ911012*3
AJ911112*3
AJ921012*3
AJ921112*3
AJ911022*3
AJ911122*3
AJ921022*3
AJ921122*3
AJ911001*3
AJ911101*3
AJ921001*3
AJ921101*3
AJ911011*3
AJ911111*3
AJ921011*3
AJ921111*3
AJ911021*3
AJ911121*3
AJ921021*3
AJ921121*3
Single pole
.250 Quick-connect terminal
Soldering/.250 Quick-connect terminal
PC board terminal
ON-OFF
ON-ON
Double pole
Single pole
Double pole
Single pole
Double pole
ON-OFF
ON-ON
ON-OFF
ON-ON
ON-OFF
ON-ON
ON-OFF
ON-ON
(d.)
Remarks: 1. A letter indicating the actuator color is entered in place of * symbol. (W: White B: Black R: Red Z: Dark gray H: Light gray L: Blue G: Green
Y:Yellow)
For requests of other flange color,please suffix following letter. (W: White R: Red Z: Dark gray H: Light gray L: Blue G: Green Y:Yellow)
When ordering, please suffix T.
2. The color of | O indication on the actuator:
White actuator: black Others: white
3. The ON-OFF type with no indications on the actuator have received UL and CSA certifications.
All other types come with a stamp indicating international standards without your request.
26
J9(AJ9)
2. Screw mounting type
(1) Without indication on actuators
Terminal shape
Poles
Operating types
ON-OFF
ON-ON
Without indication
AJ912000*9
AJ912100*3
AJ922000*9
AJ922100*3
AJ912010*9
AJ912110*3
AJ922010*9
AJ922110*3
AJ912020*9
AJ912120*3
AJ922020*9
AJ922120*3
Single pole
.250 Quick-connect terminal
ON-OFF
ON-ON
Double pole
Single pole
Double pole
Single pole
Double pole
ON-OFF
ON-ON
Soldering/.250 Quick-connect terminal
PC board terminal
ON-OFF
ON-ON
ON-OFF
ON-ON
ON-OFF
ON-ON
(2) With | O indication on actuators
Terminal shape
Poles
Operating types
ON-OFF
ON-ON
With | O indication
With — O indication
AJ912001*3
AJ912101*3
AJ922001*3
AJ922101*3
AJ912011*3
AJ912111*3
AJ922011*3
AJ922111*3
AJ912021*3
AJ912121*3
AJ922021*3
AJ922121*3
AJ912002*3
AJ912102*3
AJ922002*3
AJ922102*3
AJ912012*3
AJ912112*3
AJ922012*3
AJ922112*3
AJ912022*3
AJ912122*3
AJ922022*3
AJ922122*3
Single pole
.250 Quick-connect terminal
Soldering/.250 Quick-connect terminal
PC board terminal
ON-OFF
ON-ON
Double pole
Single pole
Double pole
Single pole
Double pole
ON-OFF
ON-ON
ON-OFF
ON-ON
ON-OFF
ON-ON
ON-OFF
ON-ON
(Standard flange color is black. For other colors type, they are custom ordered.)
Remarks: 1. A letter indicating the actuator color is entered in place of * symbol. (W: White B: Black R: Red Z: Dark gray H: Light gray L: Blue G: Green
Y:Yellow)
For requests of other flange color,please suffix following letter. (W: White R: Red Z: Dark gray H: Light gray L: Blue G: Green Y:Yellow)
2. The color of | O indication on the actuator:
White actuator: black Others: white
3. The ON-OFF type with no indications on the actuator have received UL and CSA certifications.
All other types come with a stamp indicating international standards without your request.
SPECIFICATIONS
1. Contact rating
Motor load
Resistive load
(cos φ ] 1.0)
Type
Voltage
(EN61058-1)
(cos φ ] 0.6)
J9 switch
AC 250V
16A
4A
Remark: The motor load is in accordance with EN61058-1. Inlush current can be switched up to the value of 6 times the indicated rating.
27
J9(AJ9)
2. Characteristics
Min. 5 × 104
Mechanical
Electrical
(at 20 cpm.)
Expected life
(Min. operations)
Min. 104
(at 10 cpm., at rated load)
Initial insulation resistance
(Between terminals)
Min. 100 MΩ
(at 500V DC measured by insulation resistive meter)
Initial breakdown voltage
(Between terminals)
2,000 Vrms detection current: 10 mA
Initial contact resistance
(By voltage drop at 1A, 2 to 4V DC)
Max. 20mΩ
at 6 × 103 ope. or less
from 6 × 103 ope. to 104
Max. 30°C (UL1054)
Temperature rise
Max. 55°C (VDE0630)
Vibration resistance
Shock resistance
10 to 55 Hz at double amplitude of 1.5mm
Min. 294m/s2{30 G}
40 N {4.08kgf} for 1 minute
(operating direction)
Actuator strength
100 N {10.2kgf} for 1 minute or more
(Pull & push direction)
Tensile terminal strength
–25°C to +85°C
Ambient temperature
– 13 ° F to +185 ° F
(Not freezing below 0°C 32 ° F )
Ambient humidity
Flame retardancy
Tracking resistance
Max. 85%R.H.
UL94V-0
Min. 175
Single pole
Double pole
3.92 ± 1.96N {400 ±200gf}
5.88 ± 24.5N {600 ±250gf}
Operating force
(reference characteristics)
Remark: Test conditions are in accordance with EN61058-1, UL1054 and JIS C 6571.
mm inch General tolerance ±0.5 ±.020
DIMENSIONS
1) .250 Quick-connect terminal
1. Snap-in mounting type
Diagram of recommended locations for
panel mounting holes
X
Double pole
Single pole
12.6−+00.1
.496−+.0004
37
15
.590
1.457
10
.394
28±4 deg
R0.5 .020 Max.
7
.276
2
.079
O
N
O N
Panel thickness
X
34.2 +0.1
27
1.063
0.75 to 1.25
.030 to .049
0
1.346 +.004
0
37
1.457
4.4
.173
1.25 to 2
.049 to .079
34.4 +0.1
0
1.354 +.004
0
9.7
.382
0.8
.031
Remark: For soldering terminal and PC board
terminal, only terminal shape is changed.
1.2
.047
6.35
.250
φ1.75
φ.069
11
.433
34
1.339
7 .276
12.5
.492
28
J9(AJ9)
2. Screw mounting type
mm inch General tolerance ±0.5 ±.020
50
1.969
42±0.2
1.654±.008
Double pole
Single pole
15
.591
10
.394
33
1.299
30 deg
19.9
.783
0.8
.031
7.5
.295
4
.157
ON OFF
19
.748
29
1.142
4.4
.173 9.7
.382
0.8
.031
1.2
6.35
.250
φ1.75
φ.069
.047
11
.433
7 .276
12.4
.488
34
1.339
15
.591
Remark: For soldering terminal and PC board terminal only terminal, shape is changed.
2) Soldering/.250 Quick-connect terminal
R1.5
R.059
1
.039
9.7
.382
4.4
.173
6.35
.250
11
R0.9
R.035
.433
Remark: Dimensions other than listed above are same as those
of .250 Quick-connect terminal.
34
1.339
3) PC board terminal
PC board pattern (ON-ON)
Double pole
Single pole
4.5±0.1
4.5±0.1
.177±.004
.177±.004
1.2±0.1
1.2±0.1
.047±.004
.047±.004
7
.276
11
11
3.5
.138
11
11
6
.433 .433
.433 .433
.236
11
.433
3
.118
Remark: Dimensions other than listed above are same as those
of .250 Quick-connect terminal.
34
1.339
29
J9(AJ9)
NOTES
1. Switch mounting
der actual conditions.
3. Resistance to chemicals
Mount the switch with the hole cutting di-
mensions shown in the dimensions.
Contact us if you are considering using a
panel of other than the recommended
size and shape.
Do not solder wires onto tab terminals.
2) With manual soldering: Complete the
soldering connection work within 3 sec-
onds with the tip of the soldering iron
(60W soldering iron) at a temperature of
420°C 788°F or lower, and take care not
to apply any force to the terminal area.
It should be avoided to touch the switch
with soldering iron.
3) The terminals should be connected in
such a way that they are not under con-
stant stress from the connecting wires.
4) Terminal material is copper alloy which
may discolor due to finger's oil or after
long time. But that discoloration does not
effect actual performance.
To clean the switch unit, use a neutral de-
tergent diluted with water.
Do not use acidic or alkaline solvents as
they may damage the switch.
Furthermore, be careful not to get any of
the detergent solution inside of the switch
while cleaning it.
2. Regarding fastening lead wires to
terminals
1) When connecting the tab terminals,
use a .250 Quick-connect and insert the
terminals straight in.
If they are skewed, the terminals will re-
quire excessive insertion force.
In addition, there is some variation in the
insertion force required for different re-
ceptacles from different manufacturers,
so confirm how much force is needed un-
4. Environment
Avoid using and storing these switches in
a location where they will be exposed to
corrosive gases, silicon, or high dust lev-
els, all of which can have an adverse ef-
fect on the contacts.
5.Take care not to drop the product as
it may impair perfomance.
REFERENCE
1. Outline of UL1054 test
2. Outline of EN61058-1 test
Overload test J9: 20A 250V AC
(Power factor 0.75 to 0.8)
50 operation
Endurance test J9: 16A 250V AC
(Power factor 0.75 to 0.8)
6×103operation
After switching 5 × 103 times on the above
load condition at both 85+5°C 185 °F and
+41
+32
0
25±10°C 77±50°F, temperature rise of
terminals should be less than 55°C 131°F
and no abnormality should be observed in
characteristics.
After testing, temperature rise of termi-
50 to 100ms
nals should be less than 30°C 86°F and
no abnormality should be observed in
characteristics.
24A
AC: 250V
(Power factor 0.6)
J9: 16A
2 sec.
4 sec.
30
相关型号：
AJ911002Y9
Rocker Switch, SPST, On-off, Quick Connect Terminal, Rocker Actuator, Panel Mount
PANASONIC
©2020 ICPDF网 联系我们和版权申明