AJN1114R [PANASONIC]
Toggle Switch;型号: | AJN1114R |
厂家: | PANASONIC |
描述: | Toggle Switch 开关 |
文件: | 总10页 (文件大小:749K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TURQUOISE SNAP
SWITCHES (AJN1/2)
SUPER-MINIATURE
OPERATION SWITCHES
2. Hermetically sealed for superior
resistance against adverse
environments (dust and gas) and
washing
Protective grade: The body is
hermetically sealed to the level of IP67 so
it can be washed as is (except terminals).
Also, there will be no problem when using
a standard substitute Freon cleaning
solution.
CONSTRUCTION
Reinforced resin lever
Anti-static electricity
property of at least
20 kV realized.
Sealed with O-ring.
Higher level than IP67.
(For details, please inquire.)
3. Low level rating of 0.1 A, 1 mV
achieved.
Highly reliable dual-side
sliding contacts
0.1 µA, 1 mV realized
RoHS Directive compatibility information
Sliding contacts on both sides are used
http://www.nais-e.com/
to ensure high contact reliability.
Dual-side sliding contacts
(Au plating on contact part)
PC board independent
terminals
Automatic solder rising
Fixed terminal
(AU plating on
contact part)
prevention
Terminal area is sealed
with epoxy resin.
Contact movement as seen
from directly above
APPLICATIONS
Office automation equipment
Dual-side sliding
contacts
FEATURES
(personal computers, printers, etc.),
large-scale computers, walky-talkies,
professional video cameras, switching
equipment, electrical measuring
instruments, and control panels
(robots, sequencers, elevators, etc.).
1. Designed to be as compatible as
possible with other switches.
As shown in the table below this switch is
compatible with both the toggle and
push-button switches of other
companies.
Fixed
terminal
4. Resistance to static electricity of up
to 20 kV at the lever tip
The operation lever is made with resin to
prevent entry of static electricity into the
signal circuit. However, 10 kV at the lever
tip for bracket types
Other company
“N” company
“F” company
A series
MEW
A
B
series series
5. Long electrical and mechanical life
achieved.
Electrical: Min. 100,000 times (0.4 VA)
Mechanical: Min. 200,000 times
6. All models use PC board
independent terminals
1 P
C
2 P
N/C
N/C
PC board terminal
Bracket type
C
C
N/C
0.2 inch
pitch
C
C
C
type
PC-H
terminal
0.3 inch
pitch
type
Press fitting is possible to PC board using
only light force and the fixing force
prevents the switch from rising.
7. Lead free compatibility.
—
C
C
C
PC-V terminal
N/C
N/C
Remark: C: compatible; N/C: not compatible
61
06/2006
AJN1, 2
ASSORTMENT
1. Toggle series
Handle shape
Poles
Kind of operation
Terminal shape
Color of handle
Body
Colored cap
Standard toggle
Short toggle
Round color cap
PC board terminal
(Body)
Black
Red
Bracket type
PC-H terminal
PC-V terminal
White
ON-ON
ON-OFF-ON
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
(Option)
1-pole
2-pole
Flat lever
Short flat lever
Rounded flat color cap
(Color of cap)
Black
Red
White
Light grey
Blue
Green
Yellow
(Option)
Remarks: The standard handle color is black. Red or white is available for lots of 1,000 or more.
Suffix your order number with “W” for white or “R” for red. Please consult us for other colors.
< > indicates momentary position.
2. Push-button series
Poles
Handle shape
Kind of operation
Terminal shape
Color of handle
PC board terminal
Bracket type
PC-H terminal
PC-V terminal
(Color of cap)
Black
Red
White
Light grey
Blue
Green
5.1 dia.
7.5 dia.
1-pole
2-pole
ON-<ON>
(Option)
(Option)
Yellow
Remarks: The standard handle color is black. Red or white is available for lots of 1,000 or more.
Suffix your order number with “W” for white or “R” for red. Please consult us for other colors.
< > indicates momentary position.
62
06/2006
AJN1, 2
ORDERING INFORMATION
1. Toggle series
2. Push-button series
AJN
AJN
B
Turquoise snap
Turquoise snap
Number of poles
Number of poles
1: 1-pole 2: 2-pole
1: 1-pole 2: 2-pole
Handle shape
1: Standard toggle
2: Short toggle
3: Flat lever
Handle shape
B: Push-button
Kind of operation
3: Momentary (ON-<ON>)
4: Short flat lever
Terminal shape
1: PC board terminal
2: Bracket type
3: PC-H terminal 0.2 inch pitch type
4: PC-V terminal (1-pole: A Series; 2-pole: A and B Series)
5: PC-H terminal 0.3 inch pitch type
Kind of operation
1: ON–ON
2: ON–OFF–ON
3: ON–<ON>
4: <ON>–OFF–<ON>
5: ON–OFF–<ON>
6: PC-V terminal (1-pole: B Series)
Terminal shape
1: PC board terminal
2: Bracket type
3: PC-H terminal 0.2 inch pitch type
4: PC-V terminal (1-pole: A Series; 2-pole: A and B Series)
5: PC-H terminal 0.3 inch pitch type
6: PC-V terminal (1-pole: B Series)
63
06/2006
AJN1, 2
PRODUCT TYPES
1. Toggle series
Standard toggle
Short toggle
Flat lever
Short flat lever
Change the asterisk
Change the asterisk
Change the asterisk
Change the asterisk
to a “1” when ordering. to a “2” when ordering. to a “3” when ordering. to a “4” when ordering.
1) PC board terminal and Bracket type
3
PC board terminal
Part No.
Bracket type
Part No.
*
Kind of operation
Number of poles
1-pole
< >: Momentary position
ON-ON
ON-OFF-ON
ON-<ON>
AJN1∗11
AJN1∗21
AJN1∗31
AJN1∗41
AJN1∗51
AJN2∗11
AJN2∗21
AJN2∗31
AJN2∗41
AJN2∗51
AJN1∗12
AJN1∗22
AJN1∗32
AJN1∗42
AJN1∗52
AJN2∗12
AJN2∗22
AJN2∗32
AJN2∗42
AJN2∗52
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-ON
ON-OFF-ON
ON-<ON>
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
2) PC-H terminal and PC-V terminal
PC-H terminal
PC-V terminal
3
*
Kind of operation
Number of poles
0.2 inch pitch type
0.3 inch pitch type
Part No.
A Series
Part No.
AJN1∗14
AJN1∗24
AJN1∗34
AJN1∗44
AJN1∗54
B Series
Part No.
AJN1∗16
AJN1∗26
AJN1∗36
AJN1∗46
AJN1∗56
< >: Momentary position
Part No.
AJN1∗13
AJN1∗23
AJN1∗33
AJN1∗43
AJN1∗53
AJN2∗13
AJN2∗23
AJN2∗33
AJN2∗43
AJN2∗53
ON-ON
ON-OFF-ON
ON-<ON>
AJN1∗15
AJN1∗25
AJN1∗35
AJN1∗45
AJN1∗55
AJN2∗15
AJN2∗25
AJN2∗35
AJN2∗45
AJN2∗55
1-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-ON
AJN2∗14
AJN2∗24
AJN2∗34
AJN2∗44
AJN2∗54
ON-OFF-ON
ON-<ON>
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
Remarks: 1. Products that have UL and CSA markings are standard.
2. The standard handle color is black. Red or white is available for lots of 1,000 or more. Suffix your order number with “W” for white or “R” for red.
Please consult us for other colors.
3. Single-side momentary operation models momentary position on the slotted side.
Combination with color caps of toggle series
Combine and use with the flat lever type.
Switch with color cap
Round color cap
Flat lever type
Rounded flat color cap
2. Push-button series
1) PC board terminal and Bracket type
PC board terminal
Part No.
Bracket type
Part No.
Kind of operation
< >: Momentary position
Number of poles
1-pole
2-pole
ON-<ON>
ON-<ON>
AJN1B31
AJN1B32
AJN2B32
AJN2B31
64
06/2006
AJN1, 2
2) PC-H terminal and PC-V terminal
PC-H terminal
PC-V terminal
AJN2B34
Kind of operation
< >: Momentary position
Number of poles
0.2 inch pitch type
0.3 inch pitch type
Part No.
A Series
Part No.
AJN1B34
B Series
Part No.
AJN1B36
Part No.
AJN1B33
AJN2B33
1-pole
2-pole
ON-<ON>
ON-<ON>
AJN1B35
AJN2B35
Remark: Products that have UL and CSA markings are standard.
Please use optional color cap for push-button to be fitted on body block.
Body block fitted
Body block
Color cap for push-button
with color cap
3. Color cap (option)
Product name
Part No.
AJN81∗
AJN82∗
AJN83∗
AJN84∗
Round color cap
Rounded flat color cap
5.1 dia.
For toggle switch
For push-button switch
7.5 dia.
Remarks: 1. When ordering replace the asterisk with the letter that represents the color you want. B: black; R: red; W: white; H: light grey; L: blue; G: green;Y: yellow
2. For shape, please refer to the color cap dimension.
SPECIFICATIONS
1. Contact rating
0.1A 30V AC/DC
50mA 48V AC/DC
Resistive load (Max.)
0.4VA Max. AC/DC common (Applicable voltage range: 1 mV to 48 V; Applicable current range: 0.1 µA to 0.1 A)
Low-level load (Min.)
0.1µA 1mV DC
2. Characteristics
Mechanical
Min. 2 × 105 (at 20 cpm.)
Min. 3 × 104, 0.1 VA 30 V AC/DC, 50m A 48V AC/DC (at 20 cpm.)
Expected life
Electrical
(resistive load)
Min. 105, 0.4 VA AC/DC (14mA 30 V, 0.1 A 4 V), 0.1 µA 1mV DC (at 20 cpm.)
Insulation resistance
Breakdown voltage
Contact resistance
Vibration resistance
Shock resistance
Actuator strength
Ambient temperature
Solderability
Initial, Min. 500 MΩ (at 500 V DC measured by insulation resistive meter)
Initial, 500 Vrms (at detection current: 10mA)
Initial, Max. 50 mΩ (By voltage drop at 0.1 A, 2 to 4 V DC)
10 to 55 Hz at double amplitude of 1.5 mm (contact opening Max. 10µs)
490 m/s2 (contact opening Max. 10µs)
Min. 14.7 N for 1 min. operating direction
–20°C to +80 °C (Not freezing below 0 °C)
At least 90 % covered by 260 °C, 5 s soldering
Soldering temperature resistance 350 °C for 3 s
Contact material Gold (Au) plating
65
06/2006
AJN1, 2
ELECTRICAL CIRCUIT DIAGRAM
1-pole
2-pole
Kind of operation
Keyway
Keyway
5-6
2-3, 5-6
Keyway
Momentary
Push-button switch
ON-<ON>
(When pressed)
4-5
4-5
—
1-2, 4-5
1-2, 4-5
—
Keyway
ON-ON
ON-<ON>
—
5-6
4-5
—
2-3, 5-6
1-2, 4-5
—
Toggle switch
Keyway
ON-OFF-ON
<ON>-OFF-<ON>
ON-OFF-<ON>
5-6
2-3, 5-6
Remarks: 1. Terminal number isn’t stamped on switches.
2. For ON - <ON>, ON - OFF - <ON> type toggle switches, the lever springs back (momentary position) when pushed toward the keyway side.
HANDLE SHAPE
1. Toggle series
Standard toggle
Short toggle
Flat lever
Short flat lever
0.1
0.1
2.6 dia.
5.08
5.08
Turn angle:
26°
Turn angle:
4°
4°
26°
Turn angle:
26°
0.1
Turn angle:
26°
0.1
5.08
5.08
4°
4°
1.6
2.6 dia.
1.6
10
10
6.3
6.3
5.08 dia.
5.08 dia.
5.08 dia.
5.08 dia.
With round color cap
With rounded flat color cap
4 dia.
5.1
2.6
Turn angle:
26°
Turn angle:
4°
4°
26°
12.7
12.7
2. Push-button series
For 5.1 dia. push-button
For 7.5 dia. push-button
Stroke:
1.1 mm
Stroke:
5.1 dia.
1.1 mm
7.5 dia.
5.08
5.08
4
4
6.3
6.3
With color cap
Without color cap
With color cap
Without color cap
66
06/2006
AJN1, 2
DIMENSIONS (mm) (General tolerance: 0.5)
1. Toggle switch (For standard toggle)
1) PC board terminal
PC board pattern (Top view)
1-pole
2-pole
1-pole
2-pole
Keyway
8.8
0.1
0.1
5.08
5.08
2.6 dia.
Turn angle:
4°
26°
6-0.8 0.1dia.
0.1
0.1
0.1
2.54
3-0.8 0.1 dia.
2.54
1
0.1
2.54
10
5.08 dia.
0.1
5.08
3.5
9.6
0.1
2.54
3.1
0.3
0.2
0.55
0.4
0.4
0.4
2.54
2.54
1
0.4
0.4
2.54
2.54
9
9.8
2) Bracket type
PC board pattern (Top view)
1-pole
2-pole
1-pole
2-pole
8.8
Keyway
0.1
2.54
0.1
0.1
5.08
5.08
2.6 dia.
0.1
0.1
1
8-0.8 0.1dia.
0.1
Turn angle:
2.54
2.54
4°
26°
0.1
2.54
5-0.8 0.1 dia.
10
5.08 dia.
0.1
0.1
10.16
0.1 10.16
5.08
3.5
9.6
0.1
2.54
3.1
0.2
0.3
0.2
0.7
2.54
0.3
1
0.2
0.4
0.4
0.4
0.55
2.54
2.54
0.4
0.4
0.4
2.54
2.54
Remark: The upper side of the PC board pattern drawing
is the keyway side.
9
10.16
3) PC-H terminal
PC board pattern (Top view)
1-pole
2-pole
1-pole
2-pole
0.1
0.1
0.1
0.1
2.54
2.54
2.54
2.54
8.8
5.08
Keyway
0.1
0.1
5.08
2.6 dia.
Turn angle:
4°
8-0.8 0.1dia.
26°
0.1
0.1
A
A
5-0.8 0.1dia.
10
0.1
2.54
5.08 dia.
3.5
9.6
B
B
A
B
5.3
0.2 inch pitch type
0.3 inch pitch type
5.08
7.62
0.4
0.4
A
A
2.76
0.2
0.4
0.55
2.54
0.8
3.1
3.4
0.4
0.4
2.54
2.54
9
67
06/2006
AJN1, 2
4) PC-V terminal
1-pole: A Series
2-pole: A and B Series
PC board pattern (Top view)
1-pole
2-pole
1-pole
2-pole
Keyway
8.8
5.08
0.1
0.1
0.1
0.1
0.1
2.54
2.54
2.54
5.08
Turn angle:
2.6 dia.
4°
0.1
26°
1
8-0.8 0.1 dia.
10
0.1
0.1
5-0.8 0.1 dia.
2.54
0.1
5.08
0.1
5.08 dia.
2.54
3.5
9.6
0.1
2.54
2.54
0.1
0.1
2.54
2.54
5.3
0.4
0.4
0.4
2.54
2.54
2.54
0.3
0.4
0.4
2.54
2.54
0.4
1
0.4
2.54
0.8
3.1
9
5) PC-V terminal
1-pole: B Series
PC board pattern (Top view)
1-pole
1-pole
5.08
0.1
Keyway
0.1
2.54
0.1
Turn angle:
1
2.6 dia.
5-0.8 0.1dia.
4°
26°
10
0.1
5.08
5.08 dia.
0.1
2.54
3.5
9.6
0.1
2.54
5.3
0.4
5.08
0.4
2.54
0.8
3.1
9
0.3
1
0.4
2.54
0.4
2. Push-button switch (for 5.1 dia.)
1) PC board terminal
PC board pattern (Top view)
1-pole
2-pole
1-pole
2-pole
0.1
5.1 dia.
5.08
8.8
Stroke: 1.1 m
6-0.8 0.1dia.
0.1
0.1
0.1
2.54
3-0.8 0.1 dia.
2.54
1
4
0.1
Push-
button:
omitted
2.54
6.3
3.5
0.1
5.08
9.6
0.1
2.54
0.2
0.3
1
0.55
2.54
0.4
0.4
0.4
0.4
0.4
2.54
2.54
2.54
9
9.8
68
06/2006
AJN1, 2
2) Bracket type
PC board pattern (Top view)
1-pole
2-pole
1-pole
2-pole
0.1
2.54
0.1
8.8
5.1 dia.
5.08
0.1
0.1
Stroke: 1.1 m
1
8-0.8 0.1dia.
0.1
2.54
2.54
0.1
2.54
5-0.8 0.1 dia.
4
Push-
button:
omitted
6.3
3.5
0.1
0.1
10.16
0.1 10.16
5.08
0.1
9.6
3.1
2.54
0.4
0.4
0.3
0.55
2.54
0.3
1
2.54
2.54
0.2
0.4
0.4
0.4
0.2
2.54
0.7
Remark: The upper side of the PC board pattern drawing
is the keyway side.
0.4
9
2.54
10.16
3) PC-H terminal
PC board pattern (Top view)
1-pole
2-pole
1-pole
2-pole
0.1
0.1
0.1
0.1
2.54
2.54
2.54
2.54
8.8
5.08
0.1
5.1 dia.
0.1
5.08
Stroke: 1.1 m
8-0.8 0.1dia.
0.1
0.1
A
A
5-0.8 0.1dia.
4
0.1
2.54
Push-
button:
omitted
6.3
3.5
B
B
9.6
A
B
5.3
0.4
0.4
A
A
0.2 inch pitch type
0.3 inch pitch type
5.08
7.62
2.76
0.4
0.2
0.4
2.54
0.55
0.8
0.4
2.54
2.54
3.1
9
3.4
4) PC-V terminal
1-pole: A Series
2-pole: A and B Series
PC board pattern (Top view)
1-pole
2-pole
1-pole
2-pole
5.1 dia.
8.8
5.08
Stroke: 1.1 m
0.1
0.1
0.1
2.54
2.54
2.54
0.1
0.1
5.08
0.1
1
4
6.3
3.5
Push-
button:
omitted
8-0.8 0.1 dia.
0.1
0.1
5-0.8 0.1 dia.
2.54
0.1
5.08
0.1
0.4
2.54
2.54
0.1
5.3
2.54
2.54
9.6
0.1
0.1
2.54
2.54
0.4
2.54
2.54
0.4
2.54
0.8
3.1
9
0.3
0.4
0.4
1
2.54 0.4
2.54 0.4
69
06/2006
AJN1, 2
5) PC-V terminal
1-pole: B Series
PC board pattern (Top view)
1-pole
1-pole
0.1
5.1 dia.
Stroke: 1.1 m
2.54
1
0.1
5.08
0.1
5-0.8 0.1dia.
4
6.3
3.5
0.1
5.08
0.1
2.54
5.3
9.6
0.1
2.54
0.4
5.08
0.4
0.4
2.54
2.54
0.8
3.1
9
0.3
1
0.4
3. Color cap
1) For toggle switch
2) For push-button switch
5.1mm dia.
7.5mm dia.
Round color cap
Rounded flat color cap
4 dia.
R2
2.6
12
5.1 dia.
4
17.5
R2.5
4
2
R2.5
5.1 dia.
NOTES
1. Soldering operations
2. Automatic cleaning
1) For hand soldering, a soldering iron
should be used with the soldering
completed within 3 seconds at a
temperature of 350°C.
Force should not be applied to the
terminal section. Also, care should be
taken not to touch the body of the switch
with the soldering iron.
2) When soldering is done with an
automatic soldering bath, the soldering
should be completed within 5 seconds at
a bath temperature of 260°C
3) Care should be taken not to move the
terminal section within 1 min after the
soldering has been completed.
1) Although the switch can be washed as
is because it is sealed with epoxy resin
and an O-ring, please verify by washing
under actual conditions.
2) Do not use ultrasound for cleaning as
this will adversely affect switching
properties.
3) Do not operate the handle or apply a
force during washing.
3. As there is a possibility of damage if
the product is dropped, sufficient care
should be taken to avoid dropping.
4. Once removed, the color cap will
not stick back on the switch with the
same tenacity as they previously
exhibited.
Replace them with new one.
70
06/2006
相关型号:
AJN1115
Toggle Switch, SPDT, Latched, 0.1A, 30VDC, Solder Terminal, Standard Toggle Actuator, Through Hole-right Angle, ROHS COMPLIANT
PANASONIC
AJN1116
Toggle Switch, SPDT, Latched, 0.1A, 30VDC, Solder Terminal, Standard Toggle Actuator, Through Hole-right Angle, ROHS COMPLIANT
PANASONIC
AJN1121
Toggle Switch, SPDT, Latched, 0.1A, 30VDC, Solder Terminal, Standard Toggle Actuator, Through Hole-straight, ROHS COMPLIANT
PANASONIC
AJN1122
Toggle Switch, SPDT, Latched, 0.1A, 30VDC, Solder Terminal, Standard Toggle Actuator, Through Hole-straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明