ARD1204H [PANASONIC]
RF Coaxial Relay, SPDT, Latched, 0.156A (Coil), 4.5VDC (Coil), 700mW (Coil), 0.1A (Contact), 30VDC (Contact), 18000MHz, 120W (RF Input), DC Input, AC/DC Output, Panel Mount, ROHS COMPLIANT;
| 型号： | ARD1204H |
| 厂家： | 
PANASONIC |
| 描述： | RF Coaxial Relay, SPDT, Latched, 0.156A (Coil), 4.5VDC (Coil), 700mW (Coil), 0.1A (Contact), 30VDC (Contact), 18000MHz, 120W (RF Input), DC Input, AC/DC Output, Panel Mount, ROHS COMPLIANT 光电二极管 继电器 |
| 文件： | 总14页 (文件大小：647K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Addition of
RD COAXIAL
SWITCHES (ARD)
6GHz High Reliability
RD Coaxial Switch (SPDT)
for Communications Market
FEATURES
1. Excellent high frequency
characteristics (50Ω, to 26.5Ghz)
2. SPDT,Transfer and SP6T types are
available.
6. + COM type is available.
TYPICAL APPLICATIONS
3. High sensitivity
6GHz type
Wireless and mobile communication
• Cellular phone base station
• Amplifier switching
Nominal operating power:
840 mW (SPDT/SP6T, Fail-safe type,
with indicator)
Digital broadcasting
1,540 mW (Transfer, Fail-safe type, with
• Broadcasting relay station
• Broadcasting equipment
Measuring instrument
indicator)
*Without 24V type
4. Long-lasting life: min. 5 × 106
5. With termination type is added.
(SP6T)
All types of inspection equipment
Thanks to the addition of termination,
steady high frequency characteristics can
be maintained when contacts are either
open or closed and this contributes to
increase system reliability.
Please inquire beforehand if you are
thinking of using this product in
applications that involve low level load or
high frequency of switching.
RoHS compliant
HIGH FREQUENCY CHARACTERISTICS (Impedance 50Ω)
Frequency
V.S.W.R. (max.)
to 1 GHz
1.1
1 to 4 GHz
1.15
4 to 8 GHz*1
8 to 12.4 GHz
12.4 to 18 GHz
18 to 26.5 GHz*2
1.25
1.40
0.3
1.35
1.50
0.4
1.5
—
1.7
—
V.S.W.R. (SP6T With termination) (max.)
Insertion loss (dB. max.)
Isolation (dB. min.)
1.20
0.2
0.5
60
0.8
55
85
80
70
65
Notes: *1 The 6GHz type only has the above characteristics up to 6GHz.
*2 18 to 26.5GHz characteristics can be applied 26.5GHz type only (SPDT, Transfer)
ORDERING INFORMATION
ARD
RD coaxial switches
Frequency
1: to 18GHz (SPDT)
2: to 18GHz (Transfer)
3: to 13GHz (SP6T)
5: to 26.5GHz (SPDT)
6: to 26.5GHz (Transfer)
7: to 6GHz (SPDT)
Operating function
00: Fail-safe (with indicator)
20: Latching (with indicator)
02: Fail-safe (without indicator)
22: Latching (without indicator)
51: Latching with TTL driver (SPDT, Transfer) 53: Latching with TTL driver (SPDT)
(with self cut-off function) (with indicator)
(with self cut-off function) (without indicator)
Nominal operating voltage, V DC
4H: 4.5 (Fail-safe, Latching type only)
05: 5 (Latching with TTL driver type only)
12: 12
24: 24
Operation terminal
Nil: Solder terminal
C: Connector cable (SPDT type only)
Termination (SP6T type only)
Nil: No termination
Z: With termination
HF data attached
Nil: No HF test data attached
Q: HF test data attached
Note: Sealed types also available, please consult us (SPDT only)
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
TYPES
1. SPDT
1) Solder terminal
w
6GHz type
18GHz type
No HF datasheet
26.5GHz type
Ne
Nominal operating
voltage, V DC
Operating function
No HF datasheet
attached
HF datasheet
attached
No HF datasheet
HF datasheet
attached
attached
ARD1004H
ARD10012
ARD10024
ARD1204H
ARD12012
ARD12024
ARD15105
ARD15112
ARD15124
attached
ARD5004H
ARD50012
ARD50024
ARD5204H
ARD52012
ARD52024
ARD55105
ARD55112
ARD55124
4.5
12
24
4.5
12
24
5
ARD7004H
ARD70012
ARD70024
ARD7204H
ARD72012
ARD72024
ARD75105
ARD75112
ARD75124
ARD7024H
ARD70212
ARD70224
ARD7224H
ARD72212
ARD72224
ARD75305
ARD75312
ARD75324
ARD1004HQ
ARD10012Q
ARD10024Q
ARD1204HQ
ARD12012Q
ARD12024Q
ARD15105Q
ARD15112Q
ARD15124Q
ARD5004HQ
ARD50012Q
ARD50024Q
ARD5204HQ
ARD52012Q
ARD52024Q
ARD55105Q
ARD55112Q
ARD55124Q
Fail-safe
(with indicator)
Latching
(with indicator)
Latching with TTL driver
(with self cut-off function)
(with indicator)
12
24
4.5
12
24
4.5
12
24
5
Fail-safe
(without indicator)
—
—
—
—
—
—
—
—
—
—
—
—
Latching
(without indicator)
Latching with TTL driver
(with self cut-off function)
(without indicator)
12
24
Note: Standard packing; Carton: 1 pc. Case: 20 pcs.
2) Connector cable
18GHz type
HF datasheet attached
26.5GHz type
Nominal operating
Operating function
voltage, V DC
No HF datasheet attached
ARD1004HC
ARD10012C
No HF datasheet attached
ARD5004HC
ARD50012C
HF datasheet attached
ARD5004HCQ
ARD50012CQ
ARD50024CQ
ARD5204HCQ
ARD52012CQ
ARD52024CQ
ARD55105CQ
ARD55112CQ
ARD55124CQ
4.5
ARD1004HCQ
ARD10012CQ
ARD10024CQ
ARD1204HCQ
ARD12012CQ
ARD12024CQ
ARD15105CQ
ARD15112CQ
ARD15124CQ
Fail-safe
Latching
12
24
4.5
12
24
5
ARD10024C
ARD50024C
ARD1204HC
ARD12012C
ARD5204HC
ARD52012C
ARD12024C
ARD52024C
ARD15105C
ARD55105C
Latching with TTL driver
(with self cut-off function)
12
24
ARD15112C
ARD55112C
ARD15124C
ARD55124C
Note: Standard packing; Carton: 1 pc. Case: 10 pcs.
2.Transfer
18GHz type
26.5GHz type
Nominal operating
voltage, V DC
Operating function
No HF datasheet attached
ARD2004H
HF datasheet attached
ARD2004HQ
ARD20012Q
ARD20024Q
ARD2204HQ
ARD22012Q
ARD22024Q
ARD25105Q
ARD25112Q
ARD25124Q
No HF datasheet attached
ARD6004H
HF datasheet attached
ARD6004HQ
ARD60012Q
ARD60024Q
ARD6204HQ
ARD62012Q
ARD62024Q
ARD65105Q
ARD65112Q
ARD65124Q
4.5
Fail-safe
Latching
12
24
4.5
12
24
5
ARD20012
ARD60012
ARD20024
ARD60024
ARD2204H
ARD6204H
ARD22012
ARD62012
ARD22024
ARD62024
ARD25105
ARD65105
Latching with TTL driver
(with self cut-off function)
12
24
ARD25112
ARD65112
ARD25124
ARD65124
Note: Standard packing; Carton: 1 pc. Case: 10 pcs.
3. SP6T
13GHz type
Nominal operating
voltage, V DC
Operating function
No HF datasheet attached
HF datasheet attached
4.5
ARD3004H
ARD30012
ARD30024
ARD3204H
ARD32012
ARD32024
ARD3004HQ
ARD30012Q
ARD30024Q
ARD3204HQ
ARD32012Q
ARD32024Q
Fail-safe
Latching
12
24
4.5
12
24
Note: Standard packing; Carton: 1 pc. Case: 5 pcs.
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
4. SP6T (with termination)
13GHz type
Nominal operating
voltage, V DC
Operating function
No HF datasheet attached
ARD3004HZ
HF datasheet attached
4.5
12
24
4.5
12
24
ARD3004HZQ
ARD30012ZQ
ARD30024ZQ
ARD3204HZQ
ARD32012ZQ
ARD32024ZQ
Fail-safe
ARD30012Z
ARD30024Z
ARD3204HZ
Latching
ARD32012Z
ARD32024Z
Note: Standard packing; Carton: 1 pc. Case: 5 pcs.
RATING
1. Coil data
(1) SPDT
1) Fail-safe type
Nominal operating current, mA (+10%/–15%) (at 20°C 68°F)
Nominal power consumption, mW
Nominal operating voltage,
V DC
With indicator
186.7
Without indicator
With indicator
Without indicator
4.5
12
24
155.6
58.3
29.2
840
970
70.0
700
40.4
2) Latching type
Nominal operating current, mA (+10%/–15%) (at 20°C 68°F)
Nominal power consumption, mW
Nominal operating voltage,
V DC
With indicator
155.6
Without indicator
With indicator
Without indicator
4.5
12
24
111.1
41.7
16.7
700
750
900
62.5
500
37.5
3) Latching with TTL driver type
TTL logic level (see TTL logic level range)
Nominal operating voltage,
V DC
Electronic self cut-off
Available
Switching frequency
ON
OFF
5
Max. 180 cpm
(ON time : OFF time = 1 : 1)
12
24
2.4 to 5.5V
0 to 0.5V
(2) Transfer
1) Fail-safe type
Nominal operating voltage,
V DC
Nominal operating current, mA
(+10%/–15%) (at 20°C 68°F)
Nominal power consumption, mW
4.5
12
24
342.2
128.3
69.6
1540
1670
2) Latching type
Nominal operating voltage,
V DC
Nominal operating current, mA
(+10%/–15%) (at 20°C 68°F)
Nominal power consumption, mW
4.5
12
24
266.7
104.2
58.3
1200
1250
1400
3) Latching with TTL driver type (with self cut-off function)
TTL logic level (see TTL logic level range)
Nominal operating voltage,
V DC
Electronic self cut-off
Available
Switching frequency
ON
OFF
5
Max. 180 cpm
(ON time : OFF time = 1 : 1)
12
24
2.4 to 5.5V
0 to 0.5V
(3) SP6T and SP6T (with termination type)
1) Fail-safe type
Nominal operating voltage,
V DC
Nominal operating current, mA
(+10%/–15%) (at 20°C 68°F)
Nominal power consumption, mW
4.5
12
24
186.7
70.0
40.4
840
970
2) Latching type
Nominal operating voltage,
V DC
Nominal operating current, mA
(+10%/–15%) (at 20°C 68°F)
Nominal power consumption, mW
4.5
12
24
SET: 155.6 / RESET (ALL): 933.6
SET: 62.5 / RESET (ALL): 375.0
SET: 37.5 / RESET (ALL): 225.0
SET: 700 / RESET (ALL): 4,200
SET: 750 / RESET (ALL): 4,500
SET: 900 / RESET (ALL): 5,400
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
• Operating voltage range
1) Fail-safe type
2) Latching type
3) Latching with TTL driver type
(with self cut-off function)
4.5 12 24
5
12 24
4.5 12 24
V
V V
V
V V
V
V V
6 16 32
6 16 32
6.67 16 32
5.25 14 28
5.25 14 28
5.83 14 28
4.5 12 24
4.5 12 24
5 12 24
3.75 10 20
3.75 10 20
4.17 10 20
Nominal voltage
Nominal voltage
Nominal voltage
3
8 16
3
8 16
3.33
2.5
8
6
16
12
Allowable range
for use
2.25 6 12
2.25 6 12
Recommended
Allowable range
operation voltage range
Allowable range
for use
1.5
0.75
0
4
2
0
8
4
0
1.5
0.75
0
4
2
0
8
4
0
1.67
0.83
0
4
2
0
8
4
0
for use
Recommended
release voltage range
Recommended set/reset
voltage range
Recommended
set/reset voltage range
–55–40 –20
0
20
40
60
85
–55–40 –20
0
20
40
60
85
–55–40 –20
0
20
40
60
85
Ambient temperature °C
Ambient temperature °C
Ambient temperature °C
4) TTL Logic level range
5.5
5
4
3
2.4
2
ON
OFF
1
0.5
0
–55–40 –20
0
20
40
60
85
Ambient temperature °C
Note: Please consult us for use that is outside this
range.
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
2. Specifications
1) SPDT/Transfer
Characteristics
Item
Specifications
Arrangement
SPDT
Transfer
Contact
Contact material
Gold plating
Initial contact resistance
Max. 100mΩ (By voltage drop 6V DC 1A)
120W (at 3GHz)
Contact input power
(V.S.W.R. 1.15 or less, no contact switching,
ambient temperature 40°C 104°F [SPDT], 25°C 77°F [Transfer])*1
Rating
Fail-safe
Latching
840mW (4.5V, 12V DC), 970mW (24V DC)
1,540mW (4.5V, 12V DC), 1,670mW (24V DC)
Nominal
operating
power
700mW (4.5V DC), 750mW (12V DC),
900mW (24V DC)
1,200mW (4.5V DC), 1,250mW (12V DC),
1,400mW (24V DC)
Contact rating
Max. 30V 100mA
Indicator rating (with
indicator type only)
Initial contact resistance
Max. 1Ω (Measured by 5V 100mA)
Min. switching capacity
(Reference value)
3V DC, 0.1mA (5 × 106, Reliability level: 10% (3kΩ))
18 to 26.5
GHz*3
to 1 GHz
1.1
1 to 4 GHz
1.15
4 to 8 GHz*2
8 to 12.4 GHz
12.4 to 18 GHz
High frequency
characteristics
(Impedance 50Ω)
V.S.W.R. (max.)
1.25
0.3
70
1.35
0.4
65
1.5
0.5
60
1.7
0.8
55
Insertion loss (dB, max.)
Isolation (dB, min.)
0.2
85
80
Insulation resistance (Initial)
Min. 1,000 MΩ (at 500 V DC) Measurement at same location as “breakdown voltage (Initial)” section.
Between open
contacts
500 Vrms for 1 min. (Detection current: 10mA)
Between contact
Electrical
characteristics
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Breakdown
and coil
voltage
Between contact
(Initial)
and earth terminal
Between coil and
earth terminal
Time characteristics
(at 20°C 68°F)
Max. 15ms (Nominal operating voltage applied to
the coil, excluding contact bounce time.)
Max. 20ms (Nominal operating voltage applied to
the coil, excluding contact bounce time.)
Operate time
Functional
Shock
Min. 500 m/s2 (Half-wave pulse of sine wave: 11ms, detection time: 10µs.)
Destructive
Functional
Destructive
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 11ms.)
10 to 55 Hz at double amplitude of 3mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5mm
resistance
Mechanical
characteristics
Vibration
resistance
6GHz type: Min. 106
Min. 5 × 106
(at 180 cpm)
Mechanical
18 and 26.5GHz type: Min. 5 × 106
(All types, at 180 cpm)
6GHz type: Min. 106
Min. 5 × 106
(5W to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2)
(at 20 cpm)
Expected life
High frequency
contact (Hot switch)
18 and 26.5GHz type: Min. 5 × 106
(All types, 5W to 3GHz, impedance 50Ω,
V.S.W.R.; max. 1.2) (at 20 cpm)
Electrical
Indicator (with
indicator type only)
5 V DC, 10 mA, Min. 106 (at 20 cpm)
Conditions for operation,
transport and storage*4
Ambient temperature: –55°C to +85°C –67°F to +185°F
Conditions
Unit weight
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 50g 1.76oz
Approx. 110g 3.88oz
Notes: *1 Factors such as heating of the connected connector influence the high frequency characteristics; therefore, please verify under actual conditions of use.
*2 The 6GHz type only has the above characteristics up to 6GHz.
*3 18 to 26.5GHz characteristics can be applied 26.5GHz type only (SPDT, Transfer)
*4 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value.Refer to [6] AMBIENT ENVIRONMENT
in GENERAL APPLICATION GUIDELINES.
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
2) SP6T
Characteristics
Item
Specifications
Arrangement
SP6T
Gold plating
Contact
Rating
Contact material
Initial contact resistance
Max. 100mΩ (By voltage drop 6V DC 1A)
No termination
120 W (at 3GHz) (V.S.W.R. 1.15 or less, no contact switching, ambient temperature 25°C 77°F)*1
2W (at 3GHz) (V.S.W.R. 1.15 or less, no contact switching, ambient temperature 25°C 77°F)*1
840mW (4.5V, 12V DC), 970mW (24V DC)
Contact
input power
With termination
Fail-safe
Nominal
operating
power
Latching
700mW (4.5V DC), 750mW (12V DC), 900mW (24V DC)
Contact rating
Max. 30V 100mA
Initial contact resistance
Max. 1Ω (Measured by 5V 100mA)
Indicator rating
Min. switching capacity
(Reference value)
3V DC, 0.1mA (5 × 106, Reliability level: 10% (3kΩ))
to 1 GHz
1.1
1 to 4 GHz
1.15
4 to 8 GHz
1.25
8 to 12.4 GHz
12.4 to 18 GHz
No termination
With termination
1.35
1.50
0.4
1.50
1.50
1.0
V.S.W.R.
(max.)
High frequency
characteristics
(Impedance 50Ω)
1.20
0.2
1.40
Insertion loss (dB, max.)
Isolation (dB, min.)
0.3
85
80
70
65
60
Insulation resistance (Initial)
Min. 1,000 MΩ (at 500 V DC) Measurement at same location as “breakdown voltage (Initial)” section.
Between open
contacts
500 Vrms for 1 min. (Detection current: 10mA)
Between contact
Electrical
characteristics
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Breakdown
and coil
voltage
Between contact
(Initial)
and earth terminal
Between coil and
earth terminal
500 Vrms for 1 min. (Detection current: 10mA)
Time characteristics
(at 20°C 68°F)
Operate time
Max. 20ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
Functional
Shock
Min. 500 m/s2 (Half-wave pulse of sine wave: 11ms, detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 11ms.)
10 to 55 Hz at double amplitude of 3mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5mm
resistance
Destructive
Functional
Destructive
Mechanical
characteristics
Vibration
resistance
Mechanical
Min. 5 × 106 (at 180 cpm)
No termination
Min. 5 × 106 (5W to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2) (at 20 cpm)
Min. 5 × 106 (2W to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2) (at 20 cpm)
High frequency
contact (Hot switch)
Expected life
With termination
Electrical
Indicator (with
indicator type only)
5 VDC, 10 mA, Min. 106 (at 20 cpm)
Conditions for operation,
transport and storage*2
Ambient temperature: –55°C to +85°C –67°F to +185°F
Conditions
Unit weight
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 320g 11.29oz
Notes: *1 Factors such as heating of the connected connector influence the high frequency characteristics; therefore, please verify under actual conditions of use.
*2 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value.Refer to [6] AMBIENT ENVIRONMENT
in GENERAL APPLICATION GUIDELINES.
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
REFERENCE DATA
1-(1). High frequency characteristics (SPDT) 6GHz type
Sample: ARD70012
Measuring method: Measured with Agilent Technologies network analyzer (E8363B).
• V.S.W.R.
• Insertion loss
• Isolation
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0
0.1
0.2
0.3
0
10
20
30
40
50
60
70
80
Reference
value
Standard value
0.4
0.5
0.6
0.7
0.8
Standard value
Reference
value
Standard value
Reference
value
0.9
90
13.00MHz
100
30MHz 1GHz
4GHz
6GHz
8GHz
1GHz
4GHz
6GHz
8GHz
30MHz 1GHz
4GHz
6GHz
8GHz
Frequency
Frequency
Frequency
1-(2). High frequency characteristics (SPDT) 18, 26.5GHz type
Sample: ARD10012
Measuring method: Measured with Agilent Technologies network analyzer (HP8510).
• V.S.W.R.
• Insertion loss
• Isolation
0
1.9
1.8
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
10
20
30
40
50
60
70
80
Reference value
1.7
1.6
1.5
1.4
1.3
1.2
1.1
Standard value
Standard value
Reference value
Standard value
1.0
Reference value
90
0.9
1.0
100
1GHz 4GHz 8GHz 12.4GHz 18GHz
Frequency
26.5GHz
1GHz 4GHz 8GHz 12.4GHz 18GHz
26.5GHz
1GHz 4GHz 8GHz 12.4GHz 18GHz
Frequency
26.5GHz
Frequency
1-(3). High frequency characteristics (Transfer)
Sample: ARD60012
Measuring method: Measured with Agilent Technologies network analyzer (HP8510).
• V.S.W.R.
• Insertion loss
• Isolation
0
1.9
1.8
0
10
20
30
40
50
60
70
80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
Reference value
1.7
1.6
1.5
1.4
1.3
1.2
1.1
Standard value
Standard value
Standard value
Reference value
Reference value
1.0
0.9
1.0
90
100
1GHz 4GHz 8GHz 12.4GHz 18GHz
Frequency
26.5GHz
1GHz 4GHz 8GHz 12.4GHz 18GHz
26.5GHz
1GHz 4GHz 8GHz 12.4GHz 18GHz
Frequency
26.5GHz
Frequency
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
1-(4). High frequency characteristics (SP6T)
Sample: ARD30012
Measuring method: Measured with Agilent Technologies network analyzer (HP8510).
• V.S.W.R.
• Insertion loss
• Isolation
2.0
1.9
1.8
1.7
1.6
1.5
0
0.1
0.2
0.3
0.4
0.5
0
10
20
30
40
50
Reference value
Standard value
Standard value
Standard value
1.4
1.3
1.2
1.1
0.6
0.7
0.8
0.9
60
70
80
90
Reference value
Reference value
1.0
1.0
100
1GHz
4GHz
8GHz
12.4GHz
18GHz
1GHz 4GHz
8GHz
12.4GHz
18GHz
1GHz
4GHz
8GHz
12.4GHz
18GHz
Frequency
Frequency
Frequency
• Termination characteristics
2.0
1.9
1.8
1.7
1.6
1.5 Standard value
Reference value
1.4
1.3
1.2
1.1
1.0
1GHz 4GHz
8GHz
12.4GHz
18GHz
Frequency
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
1. SPDT
11.2
1) Solder terminal
.441
3.5
.138
3.5
CAD Data
3.5
.138
7.0
4.3
.169
.138
2.0
.276
Solder terminal
0.3
.012
.079
NC COM NO
Indicator
Coil
GND
+
2-3.1 dia.
2-.122 dia.
Serial No.
39.0
1.535
4.5
.177
2-2.4 dia.
2-.094 dia.
7.2
.283
6GHz type
7.3
2.1
.287 .083
11.2
.441
22.4
3-SMA connector
13.2
.520
.882
30.0
1.181
34.0
1.339
18 and 26.5GHz types
Tolerance: 0.3 .012
Fail-safe
Latching
Latching with TTL driver
(with self cut-off function)
1
COM
2
1
COM 2
NC COM NO
Indicator terminal
Coil terminal
GND
V
GNDLogic 1 Logic 2
Coil 1
Coil 2
GND
N
C
COM N O
1
COM
2
1
COM
GND
2
1
Indicator
Coil
Indicator
Coil
Indicator
Coil
GND
+
GND
1
2
V
2
Serial No.
Serial No.
Serial No.
∗ + COM type is available
* The type without indicator terminals will not have the indicator terminals that are marked with the dotted box.
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
2) Connector cable
CAD Data
Indicator
3
Coil
Pin No.
1
–
–
2
NC
1
4
NO
2
5
–
–
6
–
–
7
8
+
1
9
–
2
Fail-safe
Latching
COM
COM
GND
GND
Latching with
TTL driver
–
1
COM
2
–
V
GND Logic 1 Logic 2
D-sub connector
pin contact type
12345
6789
Pin No.
12.55
.494
3.05 dia.
.120 dia.
25.0
.984
5.95
.234
30.8
1.213
1.2
.047
110.0 10
4.331 .394
N
C
COM N O
Indicator
Coil
GND
+
2-3.1 dia.
2-.122 dia.
Serial No.
39.0
1.535
4.5
.177
2-2.4 dia.
2-.094 dia.
7.2
.283
7.3 2.1
.287 .083
11.2
.441
13.2
.520
22.4
3-SMA connector
.882
30.0
1.181
34.0
Tolerance: 0.3 .012
1.339
Fail-safe
Latching
Latching with TTL driver
(with self cut-off function)
NC COM NO
1
COM 2
1
COM
2
Indicator terminal
Coil terminal
Indicator terminal
Coil terminal
Indicator terminal
Coil terminal
GND
V
GND Logic 1 Logic 2
GND
Coil 1
Coil 2
∗ + COM type is available
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
2.Transfer
CAD Data
5.08
.200
45.70
1.799
15.24
.600
Max. 5.0
.197
5.08
.200
2.00
.079
5.08
.200
Solder terminal
0.30
.012
3-3.80 dia.
3-.150 dia.
Indicator
Coil
NC
GND
10.15
.400
+
COM
NO
20.3
.799
9.65 39.0
.380 1.535
Serial No.
J1
J3
J2
J4
9.65
.380
4-SMA connector
32.0
7.2
.283
1.260
16.2
.638
J2
J4
J1
J3
32.0
1.260
16.2
.638
1 to 1.5
.039 to .059
Tolerance: 0.3 .012
55.5
2.185
J1
J3
J2
J4
NC: J1-J2, J3-J4
NO: J1-J3, J2-J4
Fail-safe
Latching
POS1: J1-J2, J3-J4
POS2: J1-J3, J2-J4
POS1: J1-J2, J3-J4
POS2: J1-J3, J2-J4
Latching with TTL driver
Fail-safe
Latching
Latching with TTL driver
(with self cut-off function)
Coil terminal
V
Indicator terminal
Coil terminal
GND
Indicator terminal
Coil terminal
GND
Indicator terminal
1
NC
GND
Logic 1
1
COM
2
COM
NO
1
2
COM
Logic 2
2
∗ + COM type is available
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
3. SP6T
CAD Data
80.0
3.150
66.0
2.598
7-5.08
7-.200
25.4
1.000
80.0
3.150
66.0
2.598
Max. 4.5
Max. .177
78.0 dia.
3.071 dia.
3.0
.118
J2 J3
J1
Serial No.
39.5
1.555
J4
COM
1
2 3 4 5 6
Ind COM
CoiGlND
J6 J5
(Bottm view)
1
2 3 4 5 6
MADE IN JAPAN
7.2
.283
J2
J3
7-SMA jack connector
J4
J1
COM
J6
J5
Tolerance: 0.3 .012
Fail-safe type
Latching type
Coil terminal
GND
Indicator
terminal
COM
Coil terminal
GND
1
2
6
*R
1
2
6
Indicator
terminal
1
2
6
COM
1
2
6
COM J1
J2
J6
COM J1
J2
J6
*RESET (ALL)
COM1 2 3 4 5 6
GND1 2 3 4 5 6
COM 1 2 3 4 5 6
Indicator terminal
Coil terminal
Indicator terminal
Coil terminal
GND 1 2 3 4 5 6 R
J2 J3
J1
J4
J2 J3
Serial No.
Serial No.
J1
J4
COM
GND
1
1
2
2
3
3
4
4
5
5
6
6
COM
GND
1
1
2
2
3
3
4
4
5
5
6
6
Ind
Ind
COM
COM
Coil
Coil
J6 J5
(Bottm view)
J6 J5
(Bottm view)
R
MADE IN JAPAN
MADE IN JAPAN
∗ + COM type is available.
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
4. SP6T (with termination)
CAD Data
80.0
3.150
66.0
2.598
7-5.08
7-.200
25.4 66.0 80.0
1.000 2.598 3.150
Max. 4.5
Max. .177
78.0 dia.
3.071 dia.
J2 J3
J1
J4
39.5
1.555
Serial No.
COM
GND
1
1
2
2
3
3
4
4
5
5
6
6
Ind
COM
3.0
.118
Coil
J6 J5
(Bottom view)
MADE IN JAPA N
7.2
.283
J3
J2
J6
7-SMA jack connector
6-termination
J1
J4
COM
J5
Tolerance: 0.3 .012
Fail-safe type
Latching type
Coil terminal
GND
Coil terminal
GND
1
2
6
1
2
6
R
Indicator
terminal
Indicator
terminal
COM
COM
1
2
6
1
2
6
COM J1
J2
J6
COM J1
J2
J6
COM1 2 3 4 5 6
GND1 2 3 4 5 6
COM 1 2 3 4 5
6
Indicator terminal
Coil terminal
Indicator terminal
Coil terminal
GND 1 2 3 4 5 6 R
J2 J3
J1
J4
J2 J3
J1
J4
Serial No.
CO
M
1
1
2
2
3
3
4
4
5
5
6
6
Serial No.
COM
GND
1
1
2
2
3
3
4
4
5
5
6
6
Ind
CO
J6 J5
(Bottom view)
M
Ind
COM
Coil
Coil
GND
J6
J5
(Bottom view)
MADE IN JAPAN
R
MADE IN JAPAN
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
RD (ARD)
NOTES
1. For general cautions for use, please
refer to the “General Application
Guidelines”.
4) Condensation
7) For SMA connectors, we recommend
a torque of 0.90 0.1 N·m for installation,
which falls within the prescribed torque of
MIL-C-39012. Please be aware that
conditions might be different depending
on the connector materials and how it
interacts with surrounding materials.
8) Please do not use silicon based
substances such as silicon rubber, silicon
oil, silicon coatings and silicon fillings, in
the vicinity of the relay. Doing so may
cause volatile silicon gas to form which
may lead to contact failure due to the
adherence of silicon on the contacts
when they open and close in this
atmosphere.
9) Please note that when switching
contacts (latching type only), you must
apply reset (ALL) voltage and release all
contacts first. (SP6T type)
10) Do not use multiple contacts
simultaneously. (SP6T type)
11) The indicator terminal is the terminal
that indicates the operation status of the
MAIN contact.
12) For details about the drive method of
the latching with TTL driver type, please
refer to the RD coaxial switch catalog on
the website.
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
5) Freezing
Condensation or other moisture may
freeze on the relay when the temperature
is lower than 0°C 32°F. This causes
problems such as sticking of movable
parts or operational time lags.
6) Low temperature, low humidity
environments.
The plastic may become brittle if the relay
is exposed to a low temperature, low
humidity environment for long periods of
time.
6. Other handling precautions.
1) The relay’s on/off service life is based
on standard test conditions (temperature:
15 to 35°C 59 to 95°F, humidity: 25 to
75%) specified in JIS C5442-1996. Life
will depend on many factors of your
system: coil drive circuit, type of load,
switching intervals, switching phase,
ambient conditions, to name a few.
2) Use the relay within specifications
such as coil rating, contact rating and on/
off service life. If used beyond limits, the
relay may overheat, generate smoke or
catch fire.
3) Be careful not to drop the relay. If
accidentally dropped, carefully check its
appearance and characteristics before
use.
4) Be careful to wire the relay correctly.
Otherwise, malfunction, overheat, fire or
other trouble may occur.
5) The latching type relay is shipped in
the reset position. But jolts during
transport or impacts during installation
can move it to the set position. It is,
therefore, advisable to build a circuit in
which the relay can be initialized (set and
reset) just after turning on the power.
6) If a relay stays on in a circuit for many
months or years at a time without being
activated, circuit design should be
reviewed so that the relay can remain
non-excited. A coil that receives current
all the time heats, which degrades
insulation earlier than expected. A
latching type relay is recommended for
such circuits.
2. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 50 ms to set/reset the latching type
relay.
Please use the latching type for circuits
that are continually powered for long
periods of time.
3. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
4. Connection of coil indicator and
washing conditions
1) The connection of coil indicator
terminal shall be done by soldering.
Soldering conditions
Max. 260°C 500°F (solder temp) within
10sec (soldering time)
Max. 350°C 662°F (solder temp) within
3sec (soldering time)
2) This product is not sealed type,
therefore washing is not allowed.
5. Conditions for operation, transport
and storage conditions
1) Temperature:
–55 to +85°C –67 to +185°F
2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage:
Humidity, %RH
85
Tolerance range
(Avoid freezing when
used at temperatures
lower than 0°C 32°F)
(Avoid
condensation when
used at temperatures
higher than 0°C 32°F)
5
–55
–67
0
+85
+185
+32
Temperature, °C °F
ASCTB103E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
相关型号：
ARD1204HC
RF Coaxial Relay, SPDT, Latched, 0.156A (Coil), 4.5VDC (Coil), 700mW (Coil), 0.1A (Contact), 30VDC (Contact), 18000MHz, 120W (RF Input), DC Input, AC/DC Output, Panel Mount, ROHS COMPLIANT
PANASONIC
ARD1204HQ
RF Coaxial Relay, SPDT, Latched, 0.156A (Coil), 4.5VDC (Coil), 700mW (Coil), 0.1A (Contact), 30VDC (Contact), 18000MHz, 120W (RF Input), DC Input, AC/DC Output, Panel Mount, ROHS COMPLIANT
PANASONIC
ARD15105
RF Coaxial Relay, SPDT, Latched, 5VDC (Coil), 0.1A (Contact), 30VDC (Contact), 18000MHz, 120W (RF Input), AC/DC Output, Panel Mount, ROHS COMPLIANT
PANASONIC
ARD15105C
RF Coaxial Relay, SPDT, Latched, 5VDC (Coil), 0.1A (Contact), 30VDC (Contact), 18000MHz, 120W (RF Input), AC/DC Output, Panel Mount, ROHS COMPLIANT
PANASONIC
ARD15105CQ
RF Coaxial Relay, SPDT, Latched, 5VDC (Coil), 0.1A (Contact), 30VDC (Contact), 18000MHz, 120W (RF Input), AC/DC Output, Panel Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明