ARS3503 [PANASONIC]
RF Relay, SPDT, Latched, 0.067A (Coil), 3VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 3000MHz, 1W (RF Input), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;型号: | ARS3503 |
厂家: | PANASONIC |
描述: | RF Relay, SPDT, Latched, 0.067A (Coil), 3VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 3000MHz, 1W (RF Input), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT 光电二极管 |
文件: | 总11页 (文件大小:414K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3 GHz capable, 10 W
carrying power (at 3 GHz),
50Ω/75Ω impedance and
1 Form C relays
RS RELAYS (ARS)
2. Lineup includes silent type.
(75Ω type only)
Operation noise (Unit: dB)
TYPICAL APPLICATIONS
1. Broadcasting and video equipment
markets
• Broadcasting equipment
• STB/tuner, etc.
2. Mobile phone base stations
3. Communications market
• Antenna switching
40
30
• All types of wireless devices
4. Measurement equipment market
• Spectrum analyzer and oscilloscope,
etc.
RS
(Silent type)
RE
RoHS compliant
3. Excellent high frequency
characteristics
4. Lineup includes surface-mount
terminal type
E and Y layouts available.
5. Lineup includes reversed contact
type
Great design freedom is possible using
reversed contact type in which the
positions of the N.O. and N.C. contacts
are switched.
FEATURES
1. Miniature design
If you consider using applications with
low level loads or with high frequency
switching, please consult us.
14 × 8.6 × 7.2 mm .551 × .339 × .283
inch (standard PC board terminal)
60% OFF in volume
(Compared to
previous our product)
ORDERING INFORMATION
ARS
RS relays
Contact arrangement
1: Standard contact type (1 Form C)
3: Reversed contact type (1 Form C)
Operating function
0: Single side stable standard type (Impedance: 75Ω)
1: 1 coil latching type (Impedance: 75Ω)
2: 2 coil latching type (Impedance: 75Ω)
3: Single side stable silent type (Impedance: 75Ω)
4: Single side stable type (Impedance: 50Ω)
5: 1 coil latching type (Impedance: 50Ω)
6: 2 coil latching type (Impedance: 50Ω)
Nil: Standard PC board terminal
A: Surface-mount terminal, E layout
Y: Surface-mount terminal, Y layout
Coil voltage, DC
03: 3 V, 4H: 4.5 V, 09: 9 V, 12: 12 V, 24: 24 V (H=0.5)
Packing style
Nil: Carton packing (Standard PC board terminal only)
Tube packing (Surface-mount terminal only)
X: Tape and reel packing (picked from 2-pin side) (Surface-mount terminal only)
Z: Tape and reel packing (picked from 18-pin side) (Surface-mount terminal only)
ASCTB106E 201407-T
–1–
RS (ARS)
TYPES
1. Standard PC board terminal and standard contact type
Part No.
1 coil latching type
ARS1503
Nominal coil
voltage
Impedance
Single side stable type
ARS1403
2 coil latching type
ARS1603
3
V DC
4.5 V DC
ARS144H
ARS154H
ARS164H
50 Ω
9
V DC
ARS1409
ARS1509
ARS1609
12 V DC
24 V DC
ARS1412
ARS1512
ARS1612
ARS1424
ARS1524
ARS1624
Part No.
Nominal coil
voltage
Impedance
Standard type
Silent type
Single side stable type
ARS1303
Single side stable type
ARS1003
1 coil latching type
ARS1103
2 coil latching type
ARS1203
3
V DC
4.5 V DC
V DC
ARS104H
ARS114H
ARS124H
ARS134H
75 Ω
9
ARS1009
ARS1109
ARS1209
ARS1309
12 V DC
24 V DC
ARS1012
ARS1112
ARS1212
ARS1312
ARS1024
ARS1124
ARS1224
ARS1324
Standard packing: 50 pcs. in an inner package; 500 pcs. in an outer package
2. Standard PC board terminal and reversed contact type
Part No.
Nominal coil
voltage
Impedance
Single side stable type
ARS3403
1 coil latching type
ARS3503
2 coil latching type
ARS3603
3
V DC
4.5 V DC
ARS344H
ARS354H
ARS364H
50 Ω
9
V DC
ARS3409
ARS3509
ARS3609
12 V DC
24 V DC
ARS3412
ARS3512
ARS3612
ARS3424
ARS3524
ARS3624
Part No.
Nominal coil
voltage
Impedance
Standard type
Silent type
Single side stable type
ARS3303
Single side stable type
ARS3003
1 coil latching type
ARS3103
2 coil latching type
ARS3203
3
V DC
4.5 V DC
V DC
ARS304H
ARS314H
ARS324H
ARS334H
75 Ω
9
ARS3009
ARS3109
ARS3209
ARS3309
12 V DC
24 V DC
ARS3012
ARS3112
ARS3212
ARS3312
ARS3024
ARS3124
ARS3224
ARS3324
Standard packing: 50 pcs. in an inner package; 500 pcs. in an outer package
3. Surface-mount terminal and standard contact type, E layout
Part No.
Nominal coil
voltage
Impedance
Single side stable type
ARS14A03ꢀ
ARS14A4Hꢀ
ARS14A09ꢀ
ARS14A12ꢀ
ARS14A24ꢀ
ARS10A03ꢀ
ARS10A4Hꢀ
ARS10A09ꢀ
ARS10A12ꢀ
ARS10A24ꢀ
1 coil latching type
ARS15A03ꢀ
ARS15A4Hꢀ
ARS15A09ꢀ
ARS15A12ꢀ
ARS15A24ꢀ
ARS11A03ꢀ
ARS11A4Hꢀ
ARS11A09ꢀ
ARS11A12ꢀ
ARS11A24ꢀ
2 coil latching type
ARS16A03ꢀ
ARS16A4Hꢀ
ARS16A09ꢀ
ARS16A12ꢀ
ARS16A24ꢀ
ARS12A03ꢀ
ARS12A4Hꢀ
ARS12A09ꢀ
ARS12A12ꢀ
ARS12A24ꢀ
3
V DC
4.5 V DC
50 Ω
75 Ω
9
V DC
12 V DC
24 V DC
3
V DC
4.5 V DC
V DC
9
12 V DC
24 V DC
Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package
Standard packing: 500 pcs. in an inner package (tape and reel); 1,000 pcs. in an outer package
Note: The box at the end of a part number shows where packing type is indicated. If there is no indication, tube packing will be used.
If “X” or “Z” is added, tape and reel packing will be used. Example: ARS14A03 (tube packing), ARS14A03X (tape and reel packing)
4. Surface-mount terminal and standard contact type,Y layout
Part No.
1 coil latching type
ARS15Y03ꢀ
ARS15Y4Hꢀ
ARS15Y09ꢀ
ARS15Y12ꢀ
ARS15Y24ꢀ
ARS11Y03ꢀ
ARS11Y4Hꢀ
ARS11Y09ꢀ
ARS11Y12ꢀ
ARS11Y24ꢀ
Nominal coil
voltage
Impedance
Single side stable type
ARS14Y03ꢀ
ARS14Y4Hꢀ
ARS14Y09ꢀ
ARS14Y12ꢀ
ARS14Y24ꢀ
ARS10Y03ꢀ
ARS10Y4Hꢀ
ARS10Y09ꢀ
ARS10Y12ꢀ
ARS10Y24ꢀ
2 coil latching type
ARS16Y03ꢀ
ARS16Y4Hꢀ
ARS16Y09ꢀ
ARS16Y12ꢀ
ARS16Y24ꢀ
ARS12Y03ꢀ
ARS12Y4Hꢀ
ARS12Y09ꢀ
ARS12Y12ꢀ
ARS12Y24ꢀ
3
V DC
4.5 V DC
V DC
50 Ω
9
12 V DC
24 V DC
3
V DC
4.5 V DC
V DC
75 Ω
9
12 V DC
24 V DC
Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package
Standard packing: 500 pcs. in an inner package (tape and reel); 1,000 pcs. in an outer package
Note: The box at the end of a part number shows where packing type is indicated. If there is no indication, tube packing will be used.
If “X” or “Z” is added, tape and reel packing will be used. Example: ARS14Y03 (tube packing), ARS14Y03X (tape and reel packing)
ASCTB106E 201407-T
–2–
RS (ARS)
5. Surface-mount terminal and reversed contact type, E layout
Part No.
1 coil latching type
ARS35A03ꢀ
ARS35A4Hꢀ
ARS35A09ꢀ
ARS35A12ꢀ
ARS35A24ꢀ
ARS31A03ꢀ
ARS31A4Hꢀ
ARS31A09ꢀ
ARS31A12ꢀ
ARS31A24ꢀ
Nominal coil
voltage
Impedance
Single side stable type
ARS34A03ꢀ
ARS34A4Hꢀ
ARS34A09ꢀ
ARS34A12ꢀ
ARS34A24ꢀ
ARS30A03ꢀ
ARS30A4Hꢀ
ARS30A09ꢀ
ARS30A12ꢀ
ARS30A24ꢀ
2 coil latching type
3
V DC
ARS36A03ꢀ
ARS36A4Hꢀ
ARS36A09ꢀ
ARS36A12ꢀ
ARS36A24ꢀ
ARS32A03ꢀ
ARS32A4Hꢀ
ARS32A09ꢀ
ARS32A12ꢀ
ARS32A24ꢀ
4.5 V DC
50 Ω
75 Ω
9
V DC
12 V DC
24 V DC
3
V DC
4.5 V DC
V DC
9
12 V DC
24 V DC
Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package
Standard packing: 500 pcs. in an inner package (tape and reel); 1,000 pcs. in an outer package
Note: The box at the end of a part number shows where packing type is indicated. If there is no indication, tube packing will be used.
If “X” or “Z” is added, tape and reel packing will be used. Example: ARS34A03 (tube packing), ARS34A03X (tape and reel packing)
6. Surface-mount terminal and reversed contact type,Y layout
Part No.
1 coil latching type
ARS35Y03ꢀ
ARS35Y4Hꢀ
ARS35Y09ꢀ
ARS35Y12ꢀ
ARS35Y24ꢀ
ARS31Y03ꢀ
ARS31Y4Hꢀ
ARS31Y09ꢀ
ARS31Y12ꢀ
ARS31Y24ꢀ
Nominal coil
voltage
Impedance
Single side stable type
ARS34Y03ꢀ
ARS34Y4Hꢀ
ARS34Y09ꢀ
ARS34Y12ꢀ
ARS34Y24ꢀ
ARS30Y03ꢀ
ARS30Y4Hꢀ
ARS30Y09ꢀ
ARS30Y12ꢀ
ARS30Y24ꢀ
2 coil latching type
ARS36Y03ꢀ
ARS36Y4Hꢀ
ARS36Y09ꢀ
ARS36Y12ꢀ
ARS36Y24ꢀ
ARS32Y03ꢀ
ARS32Y4Hꢀ
ARS32Y09ꢀ
ARS32Y12ꢀ
ARS32Y24ꢀ
3
V DC
4.5 V DC
V DC
50 Ω
9
12 V DC
24 V DC
3
V DC
4.5 V DC
V DC
75 Ω
9
12 V DC
24 V DC
Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package
Standard packing: 500 pcs. in an inner package (tape and reel); 1,000 pcs. in an outer package
Note: The box at the end of a part number shows where packing type is indicated. If there is no indication, tube packing will be used.
If “X” or “Z” is added, tape and reel packing will be used. Example: ARS34Y03 (tube packing), ARS34Y03X (tape and reel packing)
RATING
1. Coil data
1) Single side stable type
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
Max. applied voltage
(at 60°C 140°F)
power
3
V DC
4.5 V DC
V DC
66.7 mA
44.4 mA
22.2 mA
16.7 mA
8.3 mA
45
Ω
101.3 Ω
405
720
75%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
110%V or less of
nominal voltage
9
Ω
Ω
Ω
200 mW
12 V DC
24 V DC
2,880
2) 1 coil latching type
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 60°C 140°F)
3
V DC
4.5 V DC
V DC
66.7 mA
44.4 mA
22.2 mA
16.7 mA
8.3 mA
45
Ω
101.3 Ω
405
720
75%V or less of
nominal voltage
(Initial)
75%V or less of
nominal voltage
(Initial)
110%V or less of
nominal voltage
9
Ω
Ω
Ω
200 mW
12 V DC
24 V DC
2,880
3) 2 coil latching type
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 60°C 140°F)
3
V DC
4.5 V DC
V DC
133.3 mA
88.9 mA
44.4 mA
33.3 mA
16.7 mA
22.5 Ω
50.6 Ω
202.5 Ω
75%V or less of
nominal voltage
(Initial)
75%V or less of
nominal voltage
(Initial)
110%V or less of
nominal voltage
9
400 mW
12 V DC
24 V DC
360
Ω
Ω
1,440
ASCTB106E 201407-T
–3–
RS (ARS)
2. Specifications
Item
Specifications
Arrangement
Contact material
1 Form C
Contact
Rating
Gold plating
Contact resistance (Initial)
Nominal switching capacity
Contact carrying power
Max. switching voltage
Max. switching current
Max. 100 mΩ (By voltage drop 10 V AC 10mA)
1W (at 3 GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4), 10 mA 24 V DC (resistive load)
Max. 10W (at 3GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4)
30 V DC
0.5 A DC
200mW
200mW
400mW
Single side stable type
Nominal
operating
power
1 coil latching type
2 coil latching type
Max. 1.20/900MHz, Max. 1.40/3GHz (Standard PC board terminal)
Max. 1.20/900MHz, Max. 1.40/3GHz (Surface-mount terminal)
V.S.W.R.
High frequency
characteristics,
Impedance: 50Ω
(Initial)
Max. 0.10dB/900MHz, Max. 0.35dB/3GHz (Standard PC board terminal)
Max. 0.20dB/900MHz, Max. 0.40dB/3GHz (Surface-mount terminal)
Insertion loss (without D.U.T. board’s loss)
Min. 60dB/900MHz, Min. 35dB/3GHz (Standard PC board terminal)
Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal)
Isolation
Max. 1.15/900MHz, Max. 1.40/3GHz (Standard PC board terminal)
Max. 1.20/900MHz, Max. 1.50/3GHz (Surface-mount terminal)
V.S.W.R.
High frequency
characteristics,
Impedance: 75Ω
(Initial)
Max. 0.10dB/900MHz, Max. 0.30dB/3GHz (Standard PC board terminal)
Max. 0.20dB/900MHz, Max. 0.50dB/3GHz (Surface-mount terminal)
Insertion loss (without D.U.T. board’s loss)
Min. 60dB/900MHz, Min. 30dB/3GHz (Standard PC board terminal)
Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal)
Isolation
Insulation resistance (Initial)
Min. 100MΩ (at 500V DC, Measurement at same location as “Breakdown voltage” section.)
500 Vrms for 1min. (Detection current: 10mA)
Between open contacts
Breakdown
voltage
(Initial)
Between contact and earth terminal
Between contact and coil
500 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
Electrical
characteristics
Max. 60°C 140°F
Temperature rise (at 20°C 68°F)
Operate time (at 20°C 68°F)
(By resistive method, nominal voltage applied to the coil, contact carrying current: 10mA)
Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Max. 6 ms (Nominal voltage applied to the coil, excluding contact bounce time)
(without diode)
Release time (at 20°C 68°F)
Set time and Reset time (at 20°C 68°F)
Functional
Shock
Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Min. 196 m/s2 (Half-wave pulse of sine wave: 11 ms, detection time: 10μs)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10μs)
10 to 55 Hz at double amplitude of 5 mm
Approx. 40dB
resistance
Destructive
Functional
Destructive
Mechanical
characteristics
Vibration
resistance
Standard type
Operation noise*
Expected life
Silent type (75Ω, PC board terminal type only)
Approx. 30dB
Min. 5×106 (at 180 cpm)
Min. 106 (at 180 cpm)
Min. 106 (at 180 cpm)
Min. 106 (Standard PC board terminal), Min. 3×105 (Surface-mount terminal)
(10V DC 10mA resistive load)/Min. 3×105 (24V DC 10mA resistive load)
Min. 106 (Standard PC board terminal), Min. 3×105 (Surface-mount terminal)
(1W, at 3GHz, Impedance: 50Ω, V.S.W.R: Max. 1.4) (at 20 cpm)
Single side stable standard type
Mechanical
life
Single side stable silent type
Latching type
50Ω type
Electrical life
Min. 3×105 (10mA 24V DC resistive load)
75Ω type
Min. 3×105 (1W, at 3GHz, Impedance: 75Ω, V.S.W.R: Max. 1.4) (at 20 cpm)
Ambient temperature: –40 to 70°C –40°F to 158°F
(Single side stable standard and Latching type)
Ambient temperature: –40 to 60°C –40°F to 140°F (Single side stable silent type)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
Conditions for operation, transport and storage
Approx. 2 g .071 oz
* Measured the operation noise of the relay alone (with diodes at both ends of the coil) 30cm away from top side, by the A-weighted, FAST method while applying the rated
voltage.
ASCTB106E 201407-T
–4–
RS (ARS)
REFERENCE DATA
1.-(1) High frequency characteristics (Impedance: 50Ω, Standard PC board terminal)
Sample: ARS144H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details, see “8. Measuring method” under “NOTES”.
• V.S.W.R. characteristics
• Insertion loss characteristics
• Isolation characteristics
(without D.U.T. board’s loss)
2.0
0
0
NO
NC
Reference value
Standard value
Standard value
NO
Standard value
1.5
0.5
50
NC
Reference value
NC
NO
Reference value
Frequency
1.0
0.3MHz
1.0
100
900MHz
3GHz
0.3MHz 900MHz
3GHz
0.3MHz 900MHz
3GHz
Frequency
Frequency
1.-(2) High frequency characteristics (Impedance: 75Ω, Standard PC board terminal)
Sample: ARS104H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details, see “8. Measuring method” under “NOTES”.
• V.S.W.R. characteristics
• Insertion loss characteristics
• Isolation characteristics
(without D.U.T. board’s loss)
0
2
0
NO
NC
Reference value
Standard value
Reference value
Frequency
NC
NO
Standard value
Standard value
1.5
0.5
50
NO
NC
Reference value
Frequency
1
1.0
100
0.3MHz
900MHz
3GHz
0.3MHz 900MHz
3GHz
0.3MHz 900MHz
3GHz
Frequency
1.-(3) High frequency characteristics (Impedance: 50Ω, Surface-mount terminal)
Sample: ARS14A4H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details, see “8. Measuring method” under “NOTES”.
• V.S.W.R. characteristics
• Insertion loss characteristics
• Isolation characteristics
(without D.U.T. board’s loss)
2.0
0
0
NO
Standard value
NO
Reference value
NC
Standard value
0.5
Standard value
1.5
50
NC
Reference value
NC
Reference value
NO
3GHz
1
1.0
100
0.3MHz
900MHz
0.3MHz 900MHz
3GHz
0.3MHz 900MHz
3GHz
Frequency
Frequency
Frequency
1.-(4) High frequency characteristics (Impedance: 75Ω, Surface-mount terminal)
Sample: ARS10A4H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details, see “8. Measuring method” under “NOTES”.
• V.S.W.R. characteristics
• Insertion loss characteristics
• Isolation characteristics
(without D.U.T. board’s loss)
2.0
0
0
NC
Standard value
Reference value
Standard value
NO
Standard value
NC
1.5
0.5
1.0
50
NO
Reference value
NO
Reference value
NC
1.0
0.3MHz
100
0.3MHz 900MHz
900MHz
3GHz
0.3MHz 900MHz
3GHz
3GHz
Frequency
Frequency
Frequency
ASCTB106E 201407-T
–5–
RS (ARS)
2.-(1) Operation noise distribution
Sample: ARS134H (single side stable silent type),
50 pcs.
Coil voltage: rated voltage applied (with diode)
Equipment setting: A weighted sound pressure level,
FAST.
Background noise: approx. 20 dB
Method of measurement: See figure below.
When operated
When released
30
20
30
20
Microphone
300mm
10
0
10
0
11.811inch
Top of relay
Acoustic absorption mat
Relay
20
30
40
Noise level, dB
50
50
50
20
30
40
Noise level, dB
50
2.-(2) Operation noise distribution
Sample: ARS104H (single side stable standard type),
50 pcs.
Coil voltage: rated voltage applied (with diode)
Equipment setting: A weighted sound pressure level,
FAST.
Background noise: approx. 20 dB
Method of measurement: See figure below.
When operated
When released
30
20
30
20
Microphone
300mm
11.811inch
Top of relay
10
0
10
0
Acoustic absorption mat
Relay
20
30
40
Noise level, dB
20
30
40
Noise level, dB
50
2.-(3) Operation noise distribution
Sample: ARS114H (latching type), 50 pcs.
Coil voltage: rated voltage applied (with diode)
Equipment setting: A weighted sound pressure level,
FAST.
Background noise: approx. 20 dB
Method of measurement: See figure below.
When set and reset
30
20
Microphone
300mm
11.811inch
Top of relay
10
0
Acoustic absorption mat
Relay
20
30
40
Noise level, dB
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
<Standard PC board terminal>
1. 50Ω type
External dimensions
PC board pattern (Bottom view)
CAD Data
14.00
.551
2.54
.100
8-1.00 dia.
8-.039 dia.
2 coil latching only
Lot No.
The part numbers depend
on the type and voltage.
8.60
.339
JAPAN
Tolerance: 0.1 .004
2.54
.100
6.35
.250
1.40
.055
2 coil latching only
3-0.40×0.20
3-.016×.008
Stand off
3-ꢀ0.45
3-ꢀ.018
2-0.60×0.20
2-.024×.008
(0.60)
(.024)
Tolerance: 0.3 .012
ASCTB106E 201407-T
–6–
RS (ARS)
2. 75Ω type
External dimensions
PC board pattern (Bottom view)
CAD Data
2.54
.100
14.00
.551
3-0.90 dia.
3-.035 dia.
2 coil latching only
Lot No.
The part numbers depend
on the type and voltage.
JAPAN
8.60
.339
3-0.70 dia. Min.
3-.028 dia. Min.
R0.40
R.016
1.80
.071
2.54
.100
6.35
.250
1.40
.055
Tolerance: 0.1 .004
2 coil latching only
3-0.40×0.20
3-.016×.008
Stand off
3-ꢀ0.45
3-ꢀ.018
2-1.40×0.20
2-.055×.008
(1.40)
(.055)
Tolerance: 0.3 .012
Schematic (Bottom view)
1. Standard contact type
2. Reversed contact type
Single side stable type
(Deenergized condition)
1 coil latching type
(Reset condition)
2 coil latching type
(Reset condition)
Single side stable type
(Deenergized condition)
1 coil latching type
(Reset condition)
2 coil latching type
(Reset condition)
–
+
+
–
5
–
+
+
–
5
1
4
5
1
5
1
1
5
1
1
4
5
–
+ +
–
+ +
10
9
8
7
6
10
NC
9
8
7
6
10
9
8
7
6
10
9
8
7
6
10
9
8
7
6
10
9
8
7
6
SET
COM RESET
COM
NO
RESET COM
SET
NO
NC
SET
COM RESET
RESET COM
SET
COM
Direction indication
Direction indication
Direction indication
Direction indication
Direction indication
Direction indication
<Surface-mount terminal>
1. Impedance: 50Ω type
1) E layout
External dimensions
Schematic (Top view)
<Standard contact type>
10.16
.400
Single side stable type
(Deenergized condition)
1 coil latching type
(Reset condition)
2-coil latching type
(Reset condition)
3.2 .126
0.6 .024
3.2 .126
0.6 .024
3.2 .126
0.6 .024
8-0.4
SET
SET
1N2 O 10
RESET
RESET
COM 13
CO1M4
CO1M4 13
1N8 C 16
15 14
11
18 17 16 15
13 12 11 10
18 17 16 15
12 11 10
17
8-.016
The part numbers
depend on the
type and voltage.
Lot No.
4
6
7
8
4
6
7
8
-
4
6
7
8
2
2
2
-
+
-
+
+ +
JAPAN
0.5
0.5 .020
0.5 .020
1.27 .050
.020
Direction indication
Direction indication
Direction indication
3.2
.126
10.16
<Reversed contact type>
Single side stable type
.400
8.6
.339
1 coil latching type
(Reset condition)
2-coil latching type
(Reset condition)
14.0 .551
0.15
.006
0.15
.006
(Deenergized condition)
8.0
NO
SET
SET
CO1M4 13
NC
COM
RESET
COM
RESET
.315
18 17 16 15
12 11 10
18 17 16 15 14 13 12 11 10
18 17 16 15 14 13 12 11 10
9.2
14.6
.575
.362
11.2
.441
4
6
7
8
+
4
6
7
8
-
4
6
7
8
2
2
2
-
+
-
+ +
Direction indication
Direction indication
Direction indication
Tolerance: 0.3 .012
ASCTB106E 201407-T
–7–
RS (ARS)
2) Y layout
External dimensions
Schematic (Top view)
<Standard contact type>
10.16
.400
Single side stable type
(Deenergized condition)
1 coil latching type
(Reset condition)
2-coil latching type
(Reset condition)
3.2 .126
3.2 .126
0.6 .024
3.2 .126
0.6 .024
8-0.4
SET
SET
1N2 O 10
RESET
RESET
1N8 C 16
8-.016
11
18 17 16 15
13 12 11 10
18 17 16 15
13 12 11 10
17
15
13
The part numbers
depend on the
type and voltage.
Lot No.
4
COM
5
6
7
8
4
COM
5
6
7
8
6
4 5 7
8
COM
JAPAN
2
2
2
-
+
-
+
-
+ +
0.5
0.5 .020
0.5 .020
1.27 .050
.020
0.6
.024
Direction indication
Direction indication
Direction indication
3.2
.126
10.16
.400
<Reversed contact type>
Single side stable type
8.6
14.0 .551
0.15
.006
0.15
.006
1 coil latching type
(Reset condition)
2-coil latching type
(Reset condition)
.339
(Deenergized condition)
8.0
.315
NO
NC
SET
SET
RESET
RESET
18 17 16 15
13 12 11 10
18 17 16 15
13 12 11 10
18 17 16 15
13 12 11 10
9.2
14.6
.575
.362
11.2
.441
4
2
6
7
8
+
4
COM
6
7
8
-
4
COM
6
7
8
5
5
2
5
2
-
+
-
+ +
COM
Direction indication
Direction indication
Direction indication
Tolerance: 0.3 .012
2. Impedance: 75Ω type
1) E layout
External dimensions
Schematic (Top view)
<Standard contact type>
10.16
.400
3.2 .126
0.6 .024
3.2 .126
0.6 .024
Single side stable type
(Deenergized condition)
1 coil latching type
(Reset condition)
2-coil latching type
(Reset condition)
SET
3.2 .126
0.6 .024
8-0.4
SET
1N2 O 10
RESET
RESET
COM 13
CO1M4
CO1M4 13
1N8 C 16
8-.016
15 14
11
18 17 16 15
13 12 11 10
18 17 16 15
12 11 10
17
The part numbers
depend on the
type and voltage.
Lot No.
JAPAN
4
6
7
8
4
6
7
8
-
4
6
7
8
2
2
2
-
+
-
+
+ +
0.5
0.5 .020
0.5 .020
1.27 .050
.020
3.2
.126
Direction indication
Direction indication
Direction indication
10.16
.400
<Reversed contact type>
Single side stable type
8.6
14.0 .551
0.15
.006
0.15
.006
.339
1 coil latching type
(Reset condition)
2-coil latching type
(Reset condition)
(Deenergized condition)
8.0
.315
NO
SET
SET
CO1M4 13
NC
COM
RESET
COM
RESET
18 17 16 15
12 11 10
18 17 16 15 14 13 12 11 10
18 17 16 15 14 13 12 11 10
9.2
14.6
.575
.362
11.2
.441
4
2
6
7
8
+
4
6
7
8
-
4
6
7
8
2
2
-
+
-
+ +
Direction indication
Direction indication
Direction indication
Tolerance: 0.3 .012
2) Y layout
External dimensions
Schematic (Top view)
<Standard contact type>
10.16
.400
Single side stable type
(Deenergized condition)
1 coil latching type
(Reset condition)
2-coil latching type
(Reset condition)
3.2 .126
3.2 .126
0.6 .024
3.2 .126
0.6 .024
8-0.4
SET
SET
1N2 O 10
RESET
RESET
1N8 C 16
8-.016
11
18 17 16 15
13 12 11 10
18 17 16 15
13 12 11 10
17
15
13
The part numbers
depend on the
type and voltage.
Lot No.
4
COM
5
6
7
8
4
COM
5
6
7
8
6
4 5 7
8
COM
JAPAN
2
2
2
-
+
-
+
-
+ +
0.5
0.5 .020
0.5 .020
1.27 .050
.020
0.6
.024
Direction indication
Direction indication
Direction indication
3.2
.126
10.16
.400
<Reversed contact type>
Single side stable type
8.6
14.0 .551
0.15
.006
0.15
.006
1 coil latching type
(Reset condition)
2-coil latching type
(Reset condition)
.339
(Deenergized condition)
8.0
.315
NO
NC
SET
SET
RESET
RESET
18 17 16 15
13 12 11 10
18 17 16 15
13 12 11 10
18 17 16 15
13 12 11 10
9.2
14.6
.575
.362
11.2
.441
4
2
6
7
8
+
4
COM
6
7
8
-
4
COM
6
7
8
5
5
2
5
2
-
+
-
+ +
COM
Direction indication
Direction indication
Direction indication
Tolerance: 0.3 .012
ASCTB106E 201407-T
–8–
RS (ARS)
NOTES
*Relays are influenced by the type of PC
board used. Please confirm with the
actual PC board you plan to use.
*Please avoid reflow soldering.
1. Coil operating power
Single side stable silent type
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 30 ms to set/reset the latching type
relay.
Humidity, %R.H.
85
2) Surface-mount terminal
Tolerance range
In case of automatic soldering, the
following conditions should be observed
(1) Position of measuring temperature
(Avoid freezing (Avoid
when used at
temperatures
lower than
0°C 32°F)
condensation
when used at
temperatures
higher than
0°C 32°F)
A
5
-40
-40
0
32
60
140
Temperature, °C °F
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
A: Surface of PC board where relay is mounted.
4) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
5) Freezing
Condensation or other moisture may
freeze on the relay when the temperature
is lower than 0°C 32°F. This causes
problems such as sticking of movable
parts or operational time lags.
6) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
(2) IR (infrared reflow) soldering method
T3
3. External magnetic field
T1=150 to 180°C
Since RS relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
field. Avoid using the relay under that
condition.
T2
T2=230°C and higher
T1
T3=250°C max.
t1=60s to 120s
t2=within 30s
t1
t2
4. Cleaning
• Mounting cautions
For automatic cleaning, the boiling
method is recommended. Avoid
ultrasonic cleaning which subjects the
relays to high frequency vibrations, which
may cause the contacts to stick.
It is recommended that alcoholic solvents
be used.
5. Conditions for operation, transport
and storage conditions
1) Temperature
Rise in relay temperature depends
greatly on the component mix on a given
PC board and the heating method of the
reflow equipment. Therefore, please test
beforehand using actual equipment to
ensure that the temperature where the
relay terminals are soldered and the
temperature at the top of the relay case
are within the conditions given above.
3) Please meet the following conditions if
this relay is to be soldered by hand.
(1) 260°C 500°F for max. 10 seconds
(2) 350°C 662°F for max. 3 seconds
The effect on the relay depends on the
actual substrate used. Please verify the
substrate to be used.
7) Storage requirements
Since the relay is sensitive to humidity,
the surface-mount type is packaged with
tightly sealed anti-humidity packaging.
However, when storing, please be careful
of the following.
• Single side stable standard and latching
type: –40 to 70°C –40 to 158°F
• Single side stable silent type:
–40 to 60°C –40 to 140°F
2) Humidity: 5 to 85% RH
(1) Please use promptly once the anti-
humidity pack is opened.
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage:
Single side stable standard
If relays are left as is after unpacking,
they will absorb moisture which will result
in loss of air tightness as a result of case
expansion due to thermal stress when
reflow soldering during the mounting
process. (within one day, 30°C and
60%R.H or less)
(2) When storing for a log period after
opening the anti-humidity pack, storage
in anti-humidity packaging with an anti-
humidity bag to which silica gel has been
added, is recommended.
*Furthermore, if the relay is solder
mounted when it has been subjected to
excessive humidity, cracks and leaks can
occur. Be sure to mount the relay under
the required mounting conditions.
6. Soldering
1) Please meet the following conditions if
this relay is to be automatically soldered.
(1) Preheating: Max. 120°C 248°F
(terminal solder surface) for max. 120
seconds
(3) Avoid ultrasonic cleaning. Doing so
will adversely affect relay characteristics.
Please use alcohol-based cleaning
solvents when cleaning relays.
7.Tape and reel packing
1) Tape dimensions
8.6
.339
1.5+0.1 dia.
0
.059+0.004 dia.
2.0
and latching type
1.75 8.3
.079
16.0
.630
.069
.327
12.0
.472
RS relay
4.0
.157
0.4
.016
Humidity, %R.H.
11.5
.453
15.00
.591
X type
Z type
85
24.0 0.3
.945 .012
Tape coming out direction
Relay polarity bar
Tolerance range
(Avoid freezing (Avoid
when used at
temperatures
lower than
0°C 32°F)
condensation
when used at
temperatures
higher than
0°C 32°F)
(General tolerance: 0.1 .004)
2) Dimensions of plastic reel
5
21 0.8 dia.
.827 .031dia.
-40
-40
0
70
158
32
Temperature, °C °F
380 2 dia.
0.5
2.0
.020
14.961 .079 dia.
.079
80 1 dia.
3.150 .039 dia.
(2) Soldering: Max. 260 5°C 500 9°F for
max. 6 seconds
13 0.2 dia.
.512 .008dia.
24.4+20.0
.961+.0079
0.2
2.0
.008
.079
ASCTB106E 201407-T
–9–
RS (ARS)
8. Measuring method
1) 50Ω type
<Surface-mount terminal and
Y layout>
PC board
<Standard PC board terminal>
PC board
Dimensions (mm inch)
1
2
2
Dimensions (mm inch)
Network
analyzer
5.08
.200
1.78
.070
R0.40
R.016
PORT2
3-0.70 dia.
3-.028 dia.
(Through hole)
20.00
.787
10.16
0.80
Agilent
2.50
.400
1
.031
3-3.00 dia.
3-.118 dia.
3.70
.146
.098
1.80
.071
2.50
.098
Technologies
E8363B
6.05
.238
PORT1
2.80
.110
3-1.00 dia.
3-.039 dia.
2.54
.100
22.00
15.15
1.80
.071
.596 .866
15.95
20.00
.787
10.16
.400
Connect connectors 1 and 2 respectively
to PORT 1 and PORT 2. Perform
calibration using the 3.5 mm calibration
kit (HP85052B).
.628
0.90
.035
3-0.55 dia.
3-.022 dia.
4.90
.193
1.80
.071
2.80
.110
1.27
.050
6.35
.250
13.00
.512
2.50
.098
No.
Product name
Contents
4.20
.165
Adapter
Agilent
85130-60011
3-1.50 dia.
3-.059 dia.
1
2.4mm-3.5mm female
.095inch-.138inch female
PC board for correction
Dimensions (mm inch)
Cable
<Surface-mount terminal and
E layout>
PC board
SUHNER
SUCOFLEX104
2
3.5mm-3.5mm male
.138inch-.138inch male
2.80
.110
1.80
.071
After calibration, connect the D.U.T.
board and measure. However,
connectors other than those for
measurement should be connected with
a 50Ω termination resistor.
Dimensions (mm inch)
9.12
.359
20.00
.787
10.16
.400
2.80
2.50
.098
.110 2.50
0.80
.031
.098
0.80
.031
Material: Glass PTFE double-sided
through hole PC board R-4737
(manufactured by our company)
Board thickness: t = 0.8 mm .031 inch
Copper plating: 18 μm
Connector (SMA type receptacle)
Product name: 01K1808-00 (Waka
Manufacturing Co., Ltd.)
4.70
7.75
.305
.185
2.80
.110
24.00
.945
<Standard PC board terminal>
PC board
Dimensions (mm inch)
16.15
0.80
.031
.636
20.00
.787
10.16
.400
1.27
.050
3-R 0.90
3-R .35
1.80
.071
<Surface-mount terminal and
Y layout>
PC board
Insertion loss compensation
6.35
13.00
.512
.250
2.80
.110
The insertion loss of relay itself is given
by subtracting the insertion loss of
shortcircuit the Com and the NC (or NO).
(signal path and two connectors)
2) 75Ω type
4.20
.165
3-R 1.40
3-R .055
Dimensions (mm inch)
5.08
.200
8-1.00 dia.
8-.039 dia.
20.00
.787
(Through hole)
10.16
.400
5-2.00 dia.
5-.079 dia.
2.50
.098
4.70
.185
0.80
.031
2.50
.098
1
2
5-1.40 dia.
5-.055 dia.
PORT2
7.75
.305
2.80
.110
Network
analyzer
16.25
.640
2.54
.100
0.80
.031
24.00
16.15
.945
.636
1
2
Agilent
<Surface-mount terminal and
E layout>
PC board
Technologies
E8363B
PORT1
0.80
.031
2.80
.110
1.27
.050
2.50
.098
Dimensions (mm inch)
Connect connectors 1 and 2 respectively
to PORT 1 and PORT 2. Perform
calibration using the 3.5 mm calibration
kit (HP85039B).
20.00
.787
PC board for correction
Dimensions (mm inch)
10.16
.400
2.80
2.50
.098
.110 2.50
1.80
.071
.098
1.80
.071
4.90
.193
No.
Product name
Contents
3.70
0.90
.035
6.05
.146
2.80
.110
.238
1
85134-60003
Test port cable
15.15
Conversion adapter;
50Ω N type (female) to
75Ω N type (male)
Conversion adapter;
75Ω N type (female) to
75Ω F type (male)
1.80
.071
.596
22.00
.866
2
2
11852B
9.12
.359
85039-60011
1.27
.050
Material: Glass PTFE double-sided
through hole PC board R-4737
(manufactured by our company)
Board thickness: t = 0.8 mm .031 inch
Copper plating: 18μm
Connector (F type receptacle)
Product name: C05-0236 (Komine
Musen Electric Corporation)
After calibration, connect the D.U.T.
board and measure. However,
connectors other than those for
measurement should be connected with
a 75Ω termination resistor.
ASCTB106E 201407-T
–10–
RS (ARS)
Insertion loss compensation
Three countermeasures for these are
listed here.
(1) Incorporate an arc-extinguishing
circuit.
6) To ensure accurate operation of the
latching type amidst surrounding
The insertion loss of relay itself is given
by subtracting the insertion loss of
shortcircuit the COM and the NC (or NO).
(signal path and two connectors)
9. Others
1) The switching lifetime is defined under
the standard test condition specified in
the JIS* C 5442 standard (temperature
15 to 35°C 59 to 95°F, humidity 25 to
75%). Check this with the real device as it
is affected by coil driving circuit, load
type, activation frequency, activation
phase, ambient conditions and other
factors.
Also, be especially careful of loads such
as those listed below.
• When used for AC load-operating and
the operating phase is synchronous,
rocking and fusing can easily occur due
to contact shifting.
temperature changes and other factors
that might affect the set and reset pulse
times, we recommend a coil impress set
and reset pulse width of at least 30 ms at
the rated operation voltage.
(2) Lower the operating frequency
(3) Lower the ambient humidity
2) Use the relay within specifications
such as coil rating, contact rating and on/
off service life. If used beyond limits, the
relay may overheat, generate smoke or
catch fire.
3) Be careful not to drop the relay. If
accidentally dropped, carefully check its
appearance and characteristics before
use.
7) The latching type relay is shipped in
the reset position. But jolts during
transport or impacts during installation
can change the reset position. It is,
therefore, advisable to build a circuit in
which the relay can be initialized (set and
reset) just after turning on the power.
8) If silicone materials (e.g., silicone
rubbers, silicone oils, silicone coating
agents, silicone sealers) are used in the
vicinity of the relay, the gas emitted from
the silicone may adhere to the contacts of
the relay during opening and closing and
lead to improper contact. If this is the
case, use a material other than silicone.
4) Be careful to wire the relay correctly.
Otherwise, malfunction, overheat, fire or
other trouble may occur.
5) If a relay stays on in a circuit for many
months or years at a time without being
activated, circuit design should be
reviewed so that the relay can remain
non-excited. A coil that receives current
all the time heats, which degrades
insulation earlier than expected. A
latching type relay is recommended for
such circuits.
• When high-frequency opening and
closing of the relay is performed with a
load that causes arcs at the contacts,
nitrogen and oxygen in the air is fused by
the arc energy and HNO3 is formed. This
can corrode metal materials.
For general cautions for use, please
refer to the “General Application
Guidelines”.
ASCTB106E 201407-T
–11–
相关型号:
ARS3504
Rating at 25â Ambient temp. Unless otherwise specified. Single phase, half sine wave, 60HZ,resistive or inductive load.
GXELECTRONICS
ARS3506
Rating at 25â Ambient temp. Unless otherwise specified. Single phase, half sine wave, 60HZ,resistive or inductive load.
GXELECTRONICS
ARS3508
Rating at 25â Ambient temp. Unless otherwise specified. Single phase, half sine wave, 60HZ,resistive or inductive load.
GXELECTRONICS
ARS3509
RF Relay, SPDT, Latched, 0.022A (Coil), 9VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 3000MHz, 1W (RF Input), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明