ASQ10617 [PANASONIC]
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 6.2mm, Wire Terminal, Leaf Lever Actuator, Panel Mount, ROHS COMPLIANT;
| 型号： | ASQ10617 |
| 厂家： | 
PANASONIC |
| 描述： | Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 6.2mm, Wire Terminal, Leaf Lever Actuator, Panel Mount, ROHS COMPLIANT 开关 光电二极管 |
| 文件： | 总10页 (文件大小：210K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ULTRA-LONG STROKE,
HIGH CONTACT RELIABILITY
SEALED SWITCHES
TURQUOISE STROKE
SWITCHES
(SAME SIZE AS J TYPE)
2. Since contact pressure does not
depend on the operation stroke, the
range of possible use over the entire
stroke is greatly increased.
(Please refer to operation concept
diagram.)
5. Silent operation
With sliding contact construction there is
no operation noise.
5.4
13.3
10.1
6. Direct operation possible from
lateral direction with pin plunger
(lever-less operation allows space
savings)
3. High contact reliability to support
low level switching loads
High contact reliability is maintained with
gold plating on both sides of sliding
contact.
7. Contains no harmful substances
(mercury, lead, hexivalent chromium,
cadmium)
(mm)
4. Highly effective sealing for
resistance against adverse
environments
Immersion protection type
• JIS C0920 (water-resistance
experiments for electrical machines and
protection rating against incursion of
solid substances)
TYPICAL APPLICATIONS
RoHS compliant
1. Automobiles (detection of door
opening and closing and shift lever
position, etc.)
2. Household appliances (propane
stoves, vacuum cleaners, air
conditioners, washing machines, etc.)
FEATURES
1. Same size as J type with ultra-long
stroke. For pin plunger type, it
maintains an ultra-long stroke O.T.
(Over Travel) with over 2.2 mm on the
NO side and over 2.5 mm on the NC
side. Variations in operation can be
absorbed.
D2
• JIS D0203 (method for testing moisture
resistance and water resistance in
automotive components)
IP67
• IEC529 (rating for outer shell protection)
ORDERING INFORMATION
Ex. ASQ1
Type of switch
Size of mounting hole
Terminal
Contact form
Actuator
ASQ1: Turquoise 0: 3 mm standard type
2: Wire leads right side type (NC and NO type only) 1: SPDT
3: Wire leads left side type (NC and NO type only) 2: SPST-NC
4: Right side pin type (solder terminal only) 4: Solder terminal
0: Pin plunger
7: Leaf lever
(wire lead type only) 8: Simulated leaf
stroke
switch
1: 3 mm without boss type
5: Left side pin type (solder terminal only)
6: Right 2 boss type (solder terminal only)
7: Left 2 boss type (solder terminal only)
5: PC board terminal
3: SPST-NO
(wire lead type only)
lever
6: Wire leads (bottom type)
7: PC right angle terminal
8: PC left angle terminal
Remark: Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
OPERATION CONCEPT DIAGRAM (reference)
Contact form: terminal type
1. SPDT
CONTACT
TF
ARRANGEMENT
Operation load
OF
RF
0
RP (NC)
OP (NC)
NC side
OT (NC)
COM
NO
NC
Contact pressure
0
(OFF)
NO side
Stroke
2. SPST-NC
3. SPST-NO
TTP
OT (NO)
RP (NO)
(Wire leads type only)
(Wire leads type only)
OP (NO)
FP
NC side
NO side
Range of possible use
COM
NC
COM
NO
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
APPLICABLE CURRENT RANGE (reference)
100mA
Applicable range
1mA
0
DC 5V
30V
PRODUCT TYPES
1.Terminal type (Mounting hole: 3mm standard type/3mm without boss type/2 boss type/Side pin type)
Mounting
hole: 3mm
without
Right
2 boss type
Left 2 boss
type
Right side Left side pin
Mounting hole: 3mm standard type
pin type
type
Operating
force Max.
boss type
Actuator
PC
right angle
terminal
PC
left angle
terminal
Solder
terminal
PC board
terminal
Solder
terminal
Solder
terminal
Solder
terminal
Solder
terminal
Pin plunger
1.5N
1.7N
1.5N
ASQ10410 ASQ10710 ASQ10810 ASQ11510 ASQ16410 ASQ17410 ASQ14410 ASQ15410
ASQ10417 ASQ10717 ASQ10817 ASQ11517 ASQ16417 ASQ17417 ASQ14417 ASQ15417
ASQ10418 ASQ10718 ASQ10818 ASQ11518 ASQ16418 ASQ17418 ASQ14418 ASQ15418
Leaf lever
Simulated leaf lever
2. Wire leads bottom type (Mounting hole: 3mm standard type)
Wire leads bottom type (Mounting hole: 3mm standard type)
Actuator
Operating force Max.
Switching type
NC type
NO type
Pin plunger
1.5N
1.7N
1.5N
ASQ10610
ASQ10617
ASQ10618
ASQ10620
ASQ10627
ASQ10628
ASQ10630
ASQ10637
ASQ10638
Leaf lever
Simulated leaf lever
3. Wire leads side type (Mounting hole: 3mm standard type)
Wire leads right side type
(Mounting hole: 3mm standard type)
Wire leads left side type
(Mounting hole: 3mm standard type)
Actuator
Operating force Max.
NC type
NO type
NC type
NO type
Pin plunger
1.5N
1.7N
1.5N
ASQ10220
ASQ10227
ASQ10228
ASQ10230
ASQ10237
ASQ10238
ASQ10320
ASQ10327
ASQ10328
ASQ10330
ASQ10337
ASQ10338
Leaf lever
Simulated leaf lever
RATING
1. Rating
1 mA, 5 V DC to 100 mA, 30 V DC
Note: Please consult us regarding 42 V DC rating.
2. Operation environment and conditions
Item
Ambient and storage temperature
Allowable operating speed
Max. operating cycle rate
Specifications
–40°C to +85°C (no freezing and condensing)
30 to 500 mm/sec.
120 cpm
Note: When switching at low and high speeds or under vibration, or in high-temperature, high-humidity environments, life and performance may be
reduced significantly depending on the load capacity. Please consult us.
3. Electrical characteristics
Between non-continuous terminals: 600 Vrms, Between each terminal and other exposed metal parts: 1,500 Vrms,
Between each terminal and ground: 1,500 Vrms (at detection current of 1 mA)
Withstand voltage (Initial)
Insulation resistance (Initial)
Contact resistance (Initial)
Min. 100 MΩ (at 100 V DC insulation resistance meter) (Locations measured same as withstand voltage.)
Max. 1 Ω (at contact resistance meter)
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
4. Characteristics
Item
5 V DC 1 mA (resistive load)
Specifications
Switching frequency: 20 times/min.
Conduction ratio: 1:1
Pushbutton operation speed: 100 mm/s
Pushbutton switching position: free position (FP) to operation limit position (TTP)
Min. 5 × 105
Min. 5 × 105
Min. 2 × 105
Electrical
switching 16 V DC 50 mA (resistive load)
life
30 V DC 100 mA (resistive load)
Single amplitude: 0.75 mm
Amplitude of vibration: 10 to 55 Hz (4 minutes cycle)
Direction and time: 30 minutes each in X, Y and Z directions
Vibration resistance
(malfunction vibration resistance)
Amplitude of vibration: 5 to 200 Hz (10 minutes cycle)
Acceleration: 43.1 m/s2
Direction and time: 30 minutes each in X, Y and Z directions
Shock resistance
(malfunction shock resistance)
Shock value: 980 m/s2
Direction and time: 5 times each in X, Y and Z directions
Frequency of vibration: 33.3 Hz, Acceleration: 43.1 m/s2
Direction and time: 8 hours each in X, Y and Z directions
Vibration resistance endurance
Terminal strength
6 N min. (each direction) *Terminal deformation possible.
85°C 500 houres
Heat resistance
Cold resistance
–40°C 500 houres
Humidity resistance
40°C 95% RH 500 houres
High-temperature, high-humidity resistance
Thermal shock resistance
Water resistance
85°C 85% RH 500 houres
30 min. at 85°C to 30 min at –40°C for 1,000 cycles
IP67 (Wire leads type)
Notes: As long as there are no particular designations, the following conditions apply to the test environment.
• Ambient temperature: 5 to 35°C
• Relative humidity: 25 to 85% RH
• Air pressure: 86 to 106 kPa
5. Protective structure
1) JIS C0920: Waterproof type
A concrete testing method is to check for any adverse effect on the structure after leaving it submerged for 30 minutes
under 1 m of water (with temperature difference between water and switch no larger than 5°C).
2) IEC 529:
IP67 (waterproof type)
A concrete testing method is to check for any adverse effect on the structure after leaving it submerged for 30 minutes
under 1 m of water (with temperature difference between water and switch no larger than 5°C).
3) JIS D0203: Equivalent of D2
A concrete testing method is to check for any adverse effect on the structure after leaving it submerged for 30 minutes
under 10 cm of water (with temperature difference between water and switch no larger than 30°C).
Note: Names of the standards can be found in the section describing features.
6. Operating characteristics
Actuator
Pin plunger
1.5N
Leaf lever
1.7N
Simulated leaf lever
1.5N
Operating Force (max. O.F.) *Note 2
Total travel Force (max. T.F.) (reference value)
(2.0N)
(3.1N)
(2.8N)
From mounting boss and hole center line
9.2mm
11.5mm
14.4mm
Free Position (max. F.P.)
From standoff
13.4mm
15.7mm
18.6mm
From mounting boss and hole center line
From standoff
8.7 0.3mm
12.9 0.3mm
8.4 0.3mm
12.6 0.3mm
8.8 0.3mm
13.0 0.3mm
8.5 0.3mm
12.7 0.3mm
2.5mm
9.8 0.5mm
14.0 0.5mm
9.3 0.5mm
13.5 0.5mm
10.1 0.5mm
14.3 0.5mm
9.6 0.5mm
13.8 0.5mm
3.1mm
12.5 0.5mm
16.7 0.5mm
12.0 0.5mm
16.2 0.5mm
12.9 0.5mm
17.1 0.5mm
12.4 0.5mm
16.6 0.5mm
3.3mm
Operating Position on NC side
O.P. (N.C.) *Note 3
From mounting boss and hole center line
From standoff
Operating Position on NO side
O.P. (N.O.) *Note 4
From mounting boss and hole center line
From standoff
Release Position on NC side
R.P. (N.C.) *Note 5
From mounting boss and hole center line
From standoff
Release Position on NO side
R.P. (N.O.) *Note 6
Over travel on N.C. side (min. O.T. (N.C.))
Over travel on N.O. side (min. O.T. (N.O.))
2.2mm
2.6mm
2.8mm
From mounting boss and hole center line
From standoff
(5.9mm)
(6.2mm)
(8.7mm)
Total Travel Position (T.T.P.)
(reference value)
(10.1mm)
(10.4mm)
(12.9mm)
Notes: 1. The above indicates the characteristics when operating the pushbutton from the vertical direction.
2. Indicates operation load for NO contact to achieve ON status.
3. Indicates position for NC contact to achieve OFF status.
4. Indicates position for NO contact to achieve ON status.
5. Indicates position for NC contact to achieve ON status.
6. Indicates position for NO contact to achieve OFF status.
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e
DIMENSIONS
mm General tolerance: 0.25
1.Terminal type: Mounting hole 3mm, standard type
Pin plunger
CAD Data
Operating Force (max. O.F.)
1.5N
From mounting boss
and hole center line
9.2mm
Free
Position
(max. F.P.)
From standoff
13.4mm
8.7 0.3mm
12.9 0.3mm
8.4 0.3mm
12.6 0.3mm
8.8 0.3mm
13.0 0.3mm
8.5 0.3mm
12.7 0.3mm
2.5mm
From mounting boss
and hole center line
Operating
Positionon
NC side
C0.3
From standoff
O.P. (N.C.)
From mounting boss
and hole center line
Operating
Positionon
NO side
8.4 0.2
13.3 0.15
5.4
5.4 0.15
2.7
1.9 dia.
From standoff
O.P. (N.O.)
3.2 0.1
From mounting boss
and hole center line
Release
Positionon
NC side
+0.1
3.0
–0
5.9
From standoff
5.1
R.P. (N.C.)
From mounting boss
and hole center line
Release
Positionon
NO side
3.7
4.2
8.3 0.1
From standoff
+0.3
R.P. (N.O.)
3.0
–0.2
+0
3.0 dia.
–0.1
Over travel on N.C. side
(min. O.T. (N.C.))
1.2
2.0
0.4
1.5
0.4
4.1
Over travel on N.O. side
(min. O.T. (N.O.))
4.53 0.15 4.53 0.15
2.2mm
Leaf lever
CAD Data
Operating Force (max. O.F.)
1.7N
From mounting boss
and hole center line
11.5mm
Free
Position
(max. F.P.)
From standoff
15.7mm
9.8 0.5mm
14.0 0.5mm
9.3 0.5mm
13.5 0.5mm
10.1 0.5mm
14.3 0.5mm
9.6 0.5mm
13.8 0.5mm
3.1mm
From mounting boss
and hole center line
Operating
Positionon
NC side
13.3 0.15
5.4
From standoff
O.P. (N.C.)
8.4 0.2
5.4 0.15
2.7
1.9 dia.
From mounting boss
and hole center line
Operating
Positionon
NO side
3.3
0.5
From standoff
R1.3
O.P. (N.O.)
From mounting boss
and hole center line
Release
Positionon
NC side
+0.1
–0
1.2
3.0
5.9
4.2
3.2 0.1
8.3 0.1
5.1
3.7
From standoff
R.P. (N.C.)
From mounting boss
and hole center line
Release
Positionon
NO side
+0.3
From standoff
3.0
–0.2
R.P. (N.O.)
+0
3.0 dia.
–0.1
1.2
2.0
Over travel on N.C. side
(min. O.T. (N.C.))
0.4
1.5
0.4
4.1
4.53 0.15 4.53 0.15
Over travel on N.O. side
(min. O.T. (N.O.))
2.6mm
Note: When switching at high speed or under shock, lever endurance may drop. Therefore,
please be sure to conduct an endurance evaluation under actual switching conditions.
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
Simulated leaf lever
mm General tolerance: 0.25
CAD Data
Operating Force (max. O.F.)
1.5N
From mounting boss
and hole center line
14.4mm
Free
Position
(max. F.P.)
From standoff
18.6mm
12.5 0.5mm
16.7 0.5mm
12.0 0.5mm
16.2 0.5mm
12.9 0.5mm
17.1 0.5mm
12.4 0.5mm
16.6 0.5mm
3.3mm
From mounting boss
and hole center line
Operating
Positionon
NC side
13.3 0.15
1.9dia.
8.4 0.2
5.4 0.15
3.3
5.4
2.7
From standoff
O.P. (N.C.)
0.5
From mounting boss
and hole center line
Operating
Positionon
NO side
From standoff
O.P. (N.O.)
From mounting boss
and hole center line
Release
Positionon
NC side
+0.1
–0
3.0
1.2
5.9
4.2
3.2 0.1
8.3 0.1
5.1
From standoff
R.P. (N.C.)
3.7
From mounting boss
and hole center line
Release
Positionon
NO side
+0.3
3.0
–0.2
+0
3.0 dia.
–0.1
From standoff
R.P. (N.O.)
0.4
1.2
2.0
1.5
0.4
4.1
Over travel on N.C. side
(min. O.T. (N.C.))
4.53 0.15
4.53 0.15
Over travel on N.O. side
(min. O.T. (N.O.))
2.8mm
Note: When switching at high speed or under shock, lever endurance may drop. Therefore,
please be sure to conduct an endurance evaluation under actual switching conditions.
Mounting hole: 3 mm without boss type
PC board terminal
CAD Data
+0.3
3.0
−0.2
0.9
C0.2
5.08 0.15 5.08 0.15
PC board pattern
+0.1
1.0 dia.
−0
5.08 0.1 5.08 0.1
2. Right side pin type (Solder terminal only)
CAD Data
2.6 0.05
8.3
2.2 0.05 dia.
8.3 0.1
13.3 0.15
5.4
2.7
5.4 0.15
5.0
1.9 dia.
1.2
2.0
0.4
4.1
4.53 0.15 4.53 0.15
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
mm General tolerance: 0.25
Left side pin type (Solder terminal only)
CAD Data
8.3 0.1
2.2 0.05 dia.
2.6 0.05
8.3
13.3 0.15
5.4
2.7
5.0
5.4 0.15
1.9 dia.
1.2
2.0
0.4
4.1
4.53 0.15 4.53 0.15
Right 2 boss type (Solder terminal only)
8.3 0.1
CAD Data
+0
2-3.0
dia.
−0.1
13.3 0.15
5.4
2.7
5.4 0.15
1.5
1.9 dia.
1.2
2.0
0.4
4.1
4.53 0.15 4.53 0.15
Left 2 boss type (Solder terminal only)
CAD Data
13.3 0.15
5.4
2.7
1.5
5.4 0.15
1.9 dia.
8.3 0.1
1.2
2.0
0.4
4.1
4.53 0.15 4.53 0.15
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
mm General tolerance: 0.25
3. Angle terminal type (3 mm standard type only)
Right type
C 0.2
CAD Data
5.08 0.15
5.08 0.15
NO
COM
0.9
NC
C0.3
13.3 0.15
8.4 0.2
5.4
5.4 0.15
2.7
1.9 dia.
3.2 0.1
8.3 0.1
0
+
0.1
−
4.1
2.0
3.0
dia.
3.1 0.4
Left type (3 mm standard type only)
CAD Data
COM
0.9
NO
5.08 0.15
NC
5.08 0.15
13.3 0.15
8.4 0.2
5.4
5.4 0.15
2.7
1.9 dia.
3.2 0.1
8.3 0.1
4.1
2.0
3.1 0.4
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
mm General tolerance: 0.25
4. Wire leads bottom type: Mounting hole 3mm, standard type
CAD Data
C 0.3
13.3
5.4
8.4 0.2
5.4 0.15
2.7
1.9 dia.
3.2 0.1
+0.1
−0
3.0
5.9
5.1
3.7
4.3
8.3 0.1
+0
3.0 dia.
−0.1
4.2
3.2
R 0.3
R 0.3
2.2
3.6
2.6
1.4 dia.
300 10
5.0 2
∗ Wire lead thickness : 0.3mm2
Wire lead color
: COM···· Black
: NC ······· Red
: NO······· White
5. Wire leads right side type: Mounting hole 3mm, standard type
CAD Data
R 0.5
C 0.3
13.3
5.4
8.4 0.2
5.4 0.15
2.7
1.9 dia.
3.2 0.1
+0.1
3.0
−0
5.9
5.1
3.7
R 0.5
1.4 dia.
8.3 0.1
+0
3.0 dia.
−0.1
4.5
4.3
R 2.0
R 0.5
2.4
5.0 2
5.2
300 10
∗ Wire lead thickness : 0.3mm2
Wire lead color
: COM···· Black
: NC ······· Red
: NO······· White
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
mm General tolerance: 0.25
6. Wire leads left side type: Mounting hole 3mm, standard type
CAD Data
R 0.5
C 0.3
8.4 0.2
13.3
5.4
5.4 0.15
1.9 dia.
2.7
3.2 0.1
+0.1
−0
3.0
5.9
5.1
R 0.5
3.7
4.3
1.4 dia.
8.3 0.1
4.5
5.0 2
R 0.5
2.4
+0
5.2
3.0 dia.
−0.1
300 10
∗ Wire lead thickness : 0.3mm2
Wire lead color
: COM···· Black
: NC ······· Red
: NO······· White
NOTES
1. Soldering conditions
1) To secure the switch, please use an
M3 small screw on a flat surface and
tighten using a maximum torque of 0.29
N·m. It is recommended that spring
washers be used with the screws and
adhesive be applied to lock the screws to
prevent loosening of the screws. Please
make sure not to apply adhesive onto the
moving parts.
2) Be sure to maintain adequate
insulating clearance between each
terminal and ground.
3) Although it is possible to directly
operate the pin plunger type from the
lateral direction, please consult us if
doing so.
4) After mounting please make sure no
tensile load will be applied to the switch
terminals.
5) Range of possible use: Please set the
operation position to within the ranges in
the following table so that there is
sufficient insulation distance and to
maintain contact reliability.
Plunger/Lever pushed
The application of excessive heat upon
the switch when soldering can cause
degradation of switch operation.
Therefore, be sure to keep within the
conditions given below.
1) Manual soldering: use soldering irons
(max. 350°C, within 3 seconds) capable
of temperature adjustment. This is to
prevent deterioration due to soldering
heat. Care should be taken not to apply
force to the terminals during soldering.
2) Automatic soldering: Soldering must
be done as below;
Frommounting
boss and hole From standoff
center line
Actuator
Pin
plunger
7.8 to 5.9
8.4 to 6.2
11.1 to 8.7
12.0 to 10.1
12.6 to 10.4
15.3 to 12.9
Leaf lever
Simulated
leaf lever
6) PC board terminal type should be
used if the products are to be soldered on
the PC board. Solder terminal type is not
for soldering on PC board.
3. Cautions regarding the circuit
1) In order to prevent malfunction in set
devices caused by bounce and chattering
during the ON-OFF switch operation,
please verify the validity of the circuit
under actual operating conditions and
temperature range.
2) When switching inductive loads
(relays, solenoids, buzzers, etc.), an arc
absorbing circuit is recommended to
protect the contacts.
4. Please verify under actual
conditions.
260°C: within 6 seconds
350°C: within 3 seconds
2. Mounting
Please avoid use in which load would be
applied to the sides (hatch part (both
sides) shown below) of the switch in the
direction indicated by the arrows. This
could cause erroneous operation. Also,
when using a metal installation board,
please make allowance for burr direction
designation and burr suppressing, etc.,
so that the burr side will not be on the
switch installation side.
mm
Plunger/lever free
Frommounting
Actuator
Please be sure to conduct quality
verification under actual operating
conditions in order to increase reliability
during actual use.
boss and hole From standoff
center line
Pin
plunger
>9.2
>10.7
>13.5
>13.4
>14.9
>17.7
5. Switch selection
Leaf lever
Please make your selection so that there
will be no problems even if the operating
characteristics vary up to 20% from the
standard values.
Simulated
leaf lever
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASQ1
6. Oil-proof and chemical-proof
characteristics
8. Other
1) Please remember that this switch
cannot be used under water. Also,
pleased be warned that switching and
sudden temperature changes with the
presence of water droplets can cause
seepage into the unit.
2) Keep away from environments where
silicon based adhesives, oil or grease are
present as faulty contacts may result
from silicon oxide. Do not use in areas
where flammable or explosive gases from
gasoline and thinner, etc., may be
present.
3) When using the lever type, please be
careful not to apply unreasonable load
from the reverse or lateral directions of
operation.
4) Do not exceed the total travel position
(TTP) and press the actuator. This could
cause operation failure. Also, when
switching at high speed or under shock
even within the operation limit, the
working life may decrease. Therefore,
please be sure to verify the quality under
actual conditions of use.
The rubber cap swells when exposed to
oil and chemicals. The extent of swelling
will vary widely depending on the type
and amount of oil and chemicals.
Check with the actual oil or chemicals
used.
In particular, be aware that solvents such
as freon, chlorine, and toluene cannot be
used.
7. Environment
• Although continuous operation of the
switch is possible within the range of
ambient temperature (humidity), as the
humidity range differs depending on the
ambient temperature, the humidity range
indicated below should be used.
Continuous use near the limit of the
range should be avoided.
• This humidity range does not guarantee
permanent performance.
Humidity, %R.H.
95
Acceptable range
5) Please make considerations so that
the switch does not become the stopper
for the moving part.
50
(Avoid freezing when
used at temperatures
lower than 0°C)
(Avoid
condensation when
used at temperatures
higher than 0°C)
5
–40
0
+85
Temperature, °C
AECTB6E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
相关型号：
ASQ10618
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 8.7mm, Wire Terminal, Simulated Leaf Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
ASQ10620
Snap Acting/Limit Switch, SPST, Momentary, 0.1A, 30VDC, 5.9mm, Wire Terminal, Pin Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
ASQ10637
Snap Acting/Limit Switch, SPST, Momentary, 0.1A, 30VDC, 6.2mm, Wire Terminal, Leaf Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
ASQ10638
Snap Acting/Limit Switch, SPST, Momentary, 0.1A, 30VDC, 8.7mm, Wire Terminal, Simulated Leaf Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
ASQ10710
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 5.9mm, Solder Terminal, Pin Plunger Actuator, Through Hole-right Angle, ROHS COMPLIANT
PANASONIC
ASQ10817
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 6.2mm, Solder Terminal, Leaf Lever Actuator, Through Hole-right Angle, ROHS COMPLIANT
PANASONIC
ASQ11510
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 10.1mm, Solder Terminal, Pin Plunger Actuator, Through Hole-straight, ROHS COMPLIANT
PANASONIC
ASQ11517
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 10.4mm, Solder Terminal, Leaf Lever Actuator, Through Hole-straight, ROHS COMPLIANT
PANASONIC
ASQ14410
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 10.1mm, Solder Terminal, Pin Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
ASQ14417
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 10.4mm, Solder Terminal, Leaf Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
ASQ14418
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 12.9mm, Solder Terminal, Simulated Leaf Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
ASQ15410
Snap Acting/Limit Switch, SPDT, Momentary, 0.1A, 30VDC, 10.1mm, Solder Terminal, Pin Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明