ASX200A06 [PANASONIC]
Power/Signal Relay, DPDT, Momentary, 0.008A (Coil), 6VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT;
| 型号： | ASX200A06 |
| 厂家： | 
PANASONIC |
| 描述： | Power/Signal Relay, DPDT, Momentary, 0.008A (Coil), 6VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT 光电二极管 继电器 |
| 文件： | 总5页 (文件大小：851K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Discontinued as of August 31, 2011
HIGH SENSIBILITY RELAY
WITH GUARANTEED
LOW LEVEL SWITCHING
CAPACITY
SX RELAYS (ASX)
FEATURES
1. High contact reliability over a long
life has been made possible for low
level loads.
3. Low thermal electromotive force
Reducing the heat from the coil
enables a thermal electromotive force
of 3 V or less.
Using a low level load (1 mV 10A to
10 V 10 mA) 107 operations were
achieved with a static contact
resistance of Max. 100 m (voltage
drop of 20 mV, 1 mA, 1 kHz) and a
dynamic contact resistance of Max.
1 (Measurement delay 10 ms,
voltage drop of 20 mV, 1 mA, 1 kHz).
2. High sensibility of 50 mW
TYPICAL APPLICATIONS
Product is discontinued.
This relay will be used for the low level
load for measuring instruments or others
where a stable contact resistance is
required.
By using the highly efficient polar
magnetic circuit “seesaw balance
armature mechanism”, a rated power
consumption of 50 mW (for single side
stable type) has been achieved.
ORDERING INFORMATION
ASX
2
0
Contact arrangement
2: 2 Form C
Operating function
0: Single side stable
1: 1 coil latching
2: 2 coil latching
Type of operation
0: Standard type (B.B.M.)
Terminal shape
Nil: Standard PC board terminal
A: Surface-mount terminal (A type)
Nominal coil voltage (DC)
1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V
12: 12V 24: 24V
Packing style
Nil: Tube packing
X: Tape and reel packing (picked from 1/3/4/5 pin side)
Z: Tape and reel packing (picked from 8/9/10/12 pin side)
TYPES
1. Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
ASX2001H
ASX20003
ASX2004H
ASX20006
ASX20009
ASX20012
ASX20024
ASX2101H
ASX21003
ASX2104H
ASX21006
ASX21009
ASX21012
ASX21024
ASX2201H
ASX22003
ASX2204H
ASX22006
ASX22009
ASX22012
ASX22024
4.5V DC
6V DC
2 Form C
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
ds_61023_en_sx: 010611J
1
SX (ASX)
Discontinued as of August 31, 2011
2. Surface-mount terminal
1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
ASX200A1H
ASX200A03
ASX200A4H
ASX200A06
ASX200A09
ASX200A12
ASX200A24
ASX210A1H
ASX210A03
ASX210A4H
ASX210A06
ASX210A09
ASX210A12
ASX210A24
ASX220A1H
ASX220A03
ASX220A4H
ASX220A06
ASX220A09
ASX220A12
ASX220A24
4.5V DC
6V DC
2 Form C
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
ASX200A1HZ
ASX200A03Z
ASX200A4HZ
ASX200A06Z
ASX200A09Z
ASX200A12Z
ASX200A24Z
ASX210A1HZ
ASX210A03Z
ASX210A4HZ
ASX210A06Z
ASX210A09Z
ASX210A12Z
ASX210A24Z
ASX220A1HZ
ASX220A03Z
ASX220A4HZ
ASX220A06Z
ASX220A09Z
ASX220A12Z
ASX220A24Z
4.5V DC
6V DC
2 Form C
9V DC
12V DC
24V DC
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
RATING
1. Coil data
1) Single side stable type
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
1.5V DC
3V DC
33.3mA
16.7mA
11.1mA
8.3mA
5.6mA
4.2mA
2.9mA
45
180
4.5V DC
6V DC
405
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
50mW
70mW
150%V of
nominal voltage
720
9V DC
1,620
2,880
8,229
12V DC
24V DC
2) 1 coil latching type
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
1.5V DC
3V DC
23.3mA
11.7mA
7.8mA
5.8mA
3.9mA
2.9mA
2.1mA
64.3
257
4.5V DC
6V DC
579
80%V or less of
nominal voltage*
(Initial)
80%V or less of
nominal voltage*
(Initial)
35mW
50mW
150%V of
nominal voltage
1,029
2,314
4,114
11,520
9V DC
12V DC
24V DC
3) 2 coil latching type
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Max. applied voltage
(at 20C 68F)
Set coil
46.7mA
23.3mA
15.6mA
11.7mA
7.8mA
Reset coil
46.7mA
23.3mA
15.6mA
11.7mA
7.8mA
Set coil
32.1
129
Reset coil
32.1
Set coil
Reset coil
1.5V DC
3V DC
129
4.5V DC
6V DC
289
289
80%V or less of
nominal voltage*
(Initial)
80%V or less of
nominal voltage*
(Initial)
70mW
70mW
150%V of
nominal voltage
514
514
9V DC
1,157
2,057
3,840
1,157
2,057
3,840
12V DC
24V DC
5.8mA
5.8mA
6.3mA
6.3mA
150mW
150mW
*Pulse drive (JIS C 5442-1996)
ds_61023_en_sx: 010611J
2
SX (ASX)
Discontinued as of August 31, 2011
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C
Static contact resistance
(During initial and electric life tests)
Max. 100 m (By voltage drop of 20 mV 1 mA [1kHz])
(By nominal switching capacity: No. of operations: 107)
Contact
Dynamic contact resistance
(During initial and electric life tests)
Max. 1 (By voltage drop of 20 mV 1 mA [1 kHz], Measurement delay 10 ms after applying
nominal coil voltage) (By nominal switching capacity: No. of operations: 107)
Contact material
Stationary contact: AgPd+Au clad Movable contact: AgPd
10 mA 10 V DC (resistive load)
0.1 W (resistive load)
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*1
Single side stable
10 V DC
10 mA DC
Rating
10 A 1 mV DC
50mW (1.5 to 12 V DC), 70mW (24 V DC)
35mW (1.5 to 12 V DC), 50mW (24 V DC)
70mW (1.5 to 12 V DC), 150mW (24 V DC)
Nominal operating
1 coil latching
power
2 coil latching
Insulation resistance (Initial)
Between open contacts
Min. 10,000M (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
750 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10160s) (FCC Part 68)
Breakdown voltage
Between contact and coil
(Initial)
Between contact sets
Between open contacts
Surge breakdown
voltage (Initial)
Electrical
characteristics
Between contacts and coil
2,500 V (210s) (Telcordia)
Max. 50C
Temperature rise (at 20C 68F)
(By resistive method, nominal coil voltage applied to the coil; contact carrying current:
10mA.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Operate time [Set time] (at 20C 68F)
Release time [Reset time] (at 20C 68F)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Functional
Shock resistance
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Min. 5 107 (at 750 cpm)
Min. 107 (10 mA 10 V DC resistive load) (at 750 cpm)
Expected life
Thermal
electromotive force
Max. 3V (at nominal voltage applied to the coil)
Ambient temperature: –40C to +70C –40F to +158F
Conditions for operation, transport and storage*2
Max. operating speed (at rated load)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
750 cpm
Approx. 2 g .071 oz
1* This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
2* Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
REFERENCE DATA
1. Switching capacity range
2-(1). Change in dynamic contact resistance
(10 mA 10 V DC resistive load)
Tested sample: ASX20012, 10 pcs.
2-(2). Change in dynamic contact resistance
(10 A 1 mV DC resistive load)
Tested sample: ASX20012, 10 pcs.
Operating speed: 750 cpm
Operating speed: 750 cpm
Measured condition: 10 ms after applying nominal coil
voltage, using voltage drop of 20 mV, 1 mA, 1 kHz.
Measured condition: 10 ms after applying nominal coil
voltage, using voltage drop of 20 mV, 1 mA, 1 kHz.
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
10mA
0.1
0.1
Max.
10μA
Max.
Min.
Min.
0
0
0
1,000
0
1,000
2,000
1mV
10V
Contact voltage
No. of operations, × 104
No. of operations, × 104
ds_61023_en_sx: 010611J
3
SX (ASX)
3-(1). Change in static contact resistance
Discontinued as of August 31, 2011
3-(2). Change in static contact resistance
(10 mA 10 V DC resistive load)
(10 A 1 mV DC resistive load)
Tested sample: ASX20012, 10 pcs.
Operating speed: 750 cpm
Tested sample: ASX20012, 10 pcs.
Operating speed: 750 cpm
100
100
N.C. side contact
N.O. side contact
N.C. side contact
N.O. side contact
90
90
80
80
70
60
50
70
60
50
Max.
Max.
40
30
20
10
0
Min.
Max.
Min.
40
30
20
10
0
Min.
Max.
Min.
0
1,000
2,000
0
1,000
No. of operations, × 104
No. of operations, × 104
DIMENSIONS (mm inch)
Download CADData from our Web site.
1. Standard PC board terminal
CAD Data
External dimensions (General tolerance: 0.3 .012)
Single side stable/1 coil latching 2 coil latching
PC board pattern (Tolerance: 0.1 .004)
Single side stable/1 coil latching
2 coil latching
7.4
.291
7.4
.291
15.0
.591
15.0
.591
10.16
.400
12.7
.500
2.54
.100
2.54
.100
0.65
.026
0.65
.026
8.2
.323
8.2
.323
5.08
.200
5.08
.200
0.5
0.5
.020
1.15
.045
0.25
.010
0.25
.010
10-1.0 dia.
10-.039 dia.
.020
3.5
.138
8-1.0 dia.
8-.039 dia.
3.5
.138
2.54
.100
2.54
.100
5.08
.200
5.08
.200
1.15
.045
5.08
.200
5.08
.200
Schematic (Bottom view)
Single side stable
1 coil latching
2 coil latching
1
3
4
5
1
3
4
5
1
3
4
5
6
7
12
10
9
8
12
10
9
8
12
10
9
8
Direction indication
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
(Reset condition)
2. Surface-mount terminal
CAD Data
External dimensions (General tolerance: 0.3 .012)
Single side stable/1 coil latching 2 coil latching
Suggested mounting pad (Tolerance: 0.1 .004)
Type
Single side stable/1 coil latching
2 coil latching
15.0
.591
7.4
.291
15.0
.591
7.4
.291
5.08
.200
5.08
.200
1.0
.039
2.54
.100
8.2
.323
8.2
.323
Max.10.0
.394
Max.10.0
.394
1.0
.039
2.54
.100
A type
0.25
.010
0.25
.010
0.65
.026
0.65
.026
5.08
.200
5.08
.200
0.5
0.5
7.24
.285
7.24
.285
.020
.020
3.16
.124
3.16
.124
2.54
.100
1.15
.045
2.54
.100
1.15
.045
5.08
.200
9.4 0.5
.370 .020
5.08
.200
9.4 0.5
.370 .020
ds_61023_en_sx: 010611J
4
SX (ASX)
Discontinued as of August 31, 2011
Schematic (Top view)
Single side stable
1 coil latching
2 coil latching
12
10
9
8
12
10
9
8
12
10
9 8 7
1
3
4
5
1
3
4
5 6
1
3 4 5
Direction indication
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
(Reset condition)
NOTES
1. Packing style
2. Automatic insertion
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Orientation (indicates PIN No.1)stripe
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
Stopper (gray)
Stopper (green)
2) Tape and reel packing
(A type)
C
B
A
(1) Tape dimensions
mm inch
1.5+0.1 dia.
0
Relay polarity bar
(Z type)
.059+.004 dia.
1.75
0.4
0
2.0
4.0
.069
.016
.079 .157
11.5
.453
15.5
Please chuck the
portion.
.610
0.3
16.0
.630
24.0
.945
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
.012 10.8 0.2
.425 .008
SX relays
10.0
.394
Tape coming out direction
(2) Dimensions of plastic reel
mm inch
2.0
.079
380 dia.
13 dia.
.512 dia.
21 dia.
.827 dia.
14.961 dia.
80 dia.
3.150 dia.
For Cautions for Use, see Relay Technical Information.
ds_61023_en_sx: 010611J
5
相关型号：
ASX200A06X
Power/Signal Relay, DPDT, Momentary, 0.008A (Coil), 6VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
ASX200A06Z
Power/Signal Relay, DPDT, Momentary, 0.008A (Coil), 6VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
ASX200A09
Power/Signal Relay, DPDT, Momentary, 0.006A (Coil), 9VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
ASX200A09X
Power/Signal Relay, DPDT, Momentary, 0.006A (Coil), 9VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
ASX200A09Z
Power/Signal Relay, DPDT, Momentary, 0.006A (Coil), 9VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
ASX200A12
Power/Signal Relay, DPDT, Momentary, 0.004A (Coil), 12VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
ASX200A12Z
Power/Signal Relay, DPDT, Momentary, 0.004A (Coil), 12VDC (Coil), 50mW (Coil), 0.01A (Contact), 10VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明