AXK5S80045P [PANASONIC]
Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Socket, ROHS COMPLIANT;型号: | AXK5S80045P |
厂家: | PANASONIC |
描述: | Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Socket, ROHS COMPLIANT PC 连接器 |
文件: | 总13页 (文件大小:410K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AXK(5(S)/6(S))
NARROW-PITCH
CONNECTORS FOR
BOARD-TO-BOARD
CONNECTION
NARROW PITCH
(0.5mm) CONNECTORS
P5 SERIES — P5K, P5KS —
• P5K
2) V notch construction used for excellent
resistance against foreign matters.
(P5KS: Available from Nov. 2005)
3. Even with the low profile, the
effective mating length has been
extended to ensure that there is some
latitude in the mating.
ꢀ What is V notch construction?
Socket
Socket
Header
With long effective
mating lengths, even
if the connection is
not perfect, the
electrical connection
is more than enough
for normal operations.
By using the edge for the contacting part
and increasing contact pressure per unit
area, the effectiveness in removing flux
and contaminants is increased compared
to its predecessor. This is also effective in
preventing the trapping of contaminants.
Effective mating length
• P5KS
[Cross section of contacting part]
Type
P5K
Effective mating length
Without notch
With V notch
0.75 mm
1.0 mm
Socket side contact cross section
Header
P5KS
Note) The external appearance and PC board pattern
differs for the P5K and P5KS series.
4. Automatic mounting
1) Suction area for suction-type
automatic mounting machines is
employed.
Header side contact cross section
FEATURES
3) Use of Ni barrier construction is
standard. Highly effective against solder
creeping.
1.The product lineup consists of
3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm,
5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm,
7.0 mm, 8.0 mm, and 9.0 mm.
Suction face
(P5KS: Available from Nov. 2005)
Type
Mated height
Notes
ꢀ What is Ni barrier construction?
P5K
3 mm, 3.5 mm
By providing an exposed nickel part on the
gold (Au) plated contact, solder creeping is
prevented despite the ultra low profile.
The external
4 mm, 4.5 mm,
5 mm, 5.5 mm,
6 mm, 6.5 mm,
7 mm, 8 mm,
9 mm
appearance and
PC board pattern
differs for the P5K
and P5KS series.
P5K Header
P5K Socket
P5KS
5. Compliance with RoHS’ Directive
Environmentally friendly, the connectors’
comply with Europe’s RoHS’ Directive.
Cadmium, lead, mercury, hexavalent,
chromium, PBB and PBDE are not used.
[Contact]
Header side contact
Ni barrier
Cu Ni Au
2. Strong resistance to adverse
environments! Utilizes
construction
for high contact reliability.
Exposed
Ni part
Cross section of
socket side contact
P5K
P5KS
APPLICATIONS
Socket side contact
Bellows contact
construction
1. Mobile phones, PHS, mobile info-
communications terminals, and other
small portable devices
ꢀ
ꢀ
Note: Construction makes solder creeping difficult
because header side is formed at the same time.
ꢀ
Note)
V notch construction
Ni barrier construction
Porosity treatment
—
—
ꢀ
2.The 160-contacts connector:
This connector is particularly suited to
the motherboard, CPU board, and other
multi-pin expansion boards on notebook
PCs and other info-communications
applications.
4) Porosity treatment applied for
improved resistance against corrosion.
ꢀ
Note)
ꢀ
What is porosity treatment?
Note: P5KS will support V notch and Ni barrier from
November, 2005, and will have TOUGH
CONTACT construction.
This treatment consists of coating the
surface with a very thin film to seal pinholes
in the gold plating. This porosity treatment
technology ensures the same contact
reliability for thin gold plating as that of thick
gold plating.
1) Contacts are highly resistant to shock
caused by dropping and employ our
original bellows contact construction.
Porosity treatment film
Pinholes
Surrounding gas
• What is meant by “bellows type” contact?
Rather than two broken-out surfaces, the contact is
formed by the surfaces of two rolled plates. This
helps the contact hold up better to repeated
insertions and removals, while at the same time
achieving highly reliable contact.
Au plating
CPU boards and
other multi-pin
expansion boards.
Ni plating
The roll surfaces
are in contact
with each other,
providing high
contact reliability.
Since the contact is
formed by bending
thin plate, it has a
spring-like quality.
This construction
helps make it resist-
ant to dropping and
twisting.
Base material
ꢀ
ꢀ
ꢀ
Improvement in insertion/removal durability
Improvement in resistance to corrosion
Improvement in contact reliability for digital signals
Mother board
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
TABLE OF PRODUCT TYPES
Socket
Header
Socket
Header
P5K
P5KS
Product name
P5K
P5KS
9.0mm
8.0mm
7.0mm
6.5mm
Mated
height
6.0mm
5.5mm
5.0mm
4.5mm
4.0mm
3.5mm
3.0mm
20
22
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
24
✩
✩
✩
✩
30
✩
✩
✩
✩
✩
✩
✩
✩
34
36
✩
✩
✩
✩
✩
✩
✩
✩
40
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
50
60
70
80
100
120
130
160
✩
✩
✩
Notes: 1. The standard type comes without positioning bosses. (Positioning bosses come standard on types with
4.0 mm and 4.5 mm mated height with 120 and 160 contacts, and 6.5 mm mated height with 130 contacts.)
Connectors with positioning boss are available for on-demand production.
2. Please consult us for products which have no ✩ mark.
ORDERING INFORMATION
1. P5K (3.0 mm and 3.5 mm)
AXK
5: Narrow Pitch Connector P5K Socket
6: Narrow Pitch Connector P5K Header
Number of contacts (2 digits)
Mated height
<Socket>
1: For mated height 3.0 mm and 3.5 mm
<Header>
2: For mated height 3.5 mm
3: For mated height 3.0 mm
Functions
3: With positioning bosses
4: Without positioning bosses
Surface treatment (Contact portion / Terminal portion)
5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
Packing
J: 1,500 pieces embossed tape and paper reel × 2
P: 1,000 pieces embossed tape and paper reel × 2
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
2. P5KS (4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 8.0 mm and 9.0 mm)
AXK
5S: Narrow Pitch Connector P5KS Socket
6S: Narrow Pitch Connector P5KS Header
Number of contacts (2 digits)
Mated height
<Socket>
0: For mated height 4.0 mm, 5.0 mm and 6.0 mm
2: For mated height 4.5 mm, 5.5 mm and 6.5 mm
3: For mated height 7.0 mm, 8.0 mm and 9.0 mm
<Header>
4: For mated height 4.0 mm, 4.5 mm and 7.0 mm
5: For mated height 5.0 mm, 5.5 mm and 8.0 mm
6: For mated height 6.0 mm, 6.5 mm and 9.0 mm
Functions
3: With positioning boss and direction for protection from reverse mating
4: Without positioning boss/with direction for protection from reverse mating
7: With positioning boss/without direction for protection from reverse mating
8: Without positioning boss and direction for protection from reverse mating
Surface treatment (Contact portion / Terminal portion)
0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
(Previous model: Ni plating on base, SnPb plating on surface of terminal portion)
5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
7: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
(for Ni barrier product available from Nov. 2005)
Contact portion
<Socket>
Nil: Without V notch product
Y: V notch type product (chamfered on both sides) (Available from Nov. 2005)
<Header>
Nil: Without V notch product
Y: V notch type product (Available from Nov. 2005)
Packing
G: 1,500 pieces embossed tape and plastic reel × 2
Socket: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm
Header: Mated heights 4.0 mm, 4.5 mm, 7.0 mm
1,000 pieces plastic reel × 2
Socket: Mated heights 7.0 mm, 8.0 mm, 9.0 mm
Header: Mated heights 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 8.0 mm, 9.0 mm
J: 1,500 pieces embossed tape and paper reel × 2
P: 1,000 pieces embossed tape and paper reel × 2
Notes: 1. Models with mating directionality to prevent reverse insertion have over 100 contacts. Models without mating directionality to prevent
reverse insertion have less than 100 contacts.
2. The plating on the solder terminal portion has changed from SnPb to Au plating from the production lot of December, 2002,
in order to eliminate lead.
3. Only “J” and “P” are supported as packaging specifications for models without Ni barrier. The packaging specification for Ni barrier
models is “G” only.
Models possible for “J” are as follows:
Sockets: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, and 6.5 mm
Headers: Mated heights 4.0 mm, 4.5 mm, and 7.0 mm
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
PRODUCT TYPES
1. P5K
Part No.
Packing
Inner carton (1 reel)
Product
name
Mated
height
No. of
contacts
Socket
Header
Outer carton
20
22
AXK520145J
AXK522145J
AXK530145J
AXK540145J
AXK550145J
AXK560145J
AXK570145J
AXK580145J
AXK500145J
AXK5A2145J
AXK520145J
AXK522145J
AXK530145J
AXK540145J
AXK550145J
AXK560145J
AXK570145J
AXK580145J
AXK500145J
AXK5A2145J
AXK620345J
AXK622345J
AXK630345J
AXK640345J
AXK650345J
AXK660345J
AXK670345J
AXK680345J
AXK600345J
AXK6A2345J
AXK620245J
AXK622245J
AXK630245J
AXK640245J
AXK650245J
AXK660245J
AXK670245J
AXK680245J
AXK600245J
AXK6A2245J
30
40
50
3.0 mm
60
70
80
100
120
20
P5K
1,500 piecesNote 1)
3,000 piecesNote 1)
22
30
40
50
3.5 mm
60
70
80
100
120
Notes) 1. For the protection of our environment, orders of J: Inner carton (1 reel) 1,500 pcs. units are recommended to reduce packaging materials.
In addition, orders of P: Inner carton (1 reel) 1,000 pcs. units with embossed tape packaging are also available; to order change the suffix “J” to the suffix “P.”
2. Regarding ordering units: During production: Please make orders in 1 reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confirm proper mounting” on page 13.)
Samples: Small lot orders are possible. Change the suffix “J” to the suffix “P”.
3. The standard type comes without positioning bosses.
Connectors with positioning bosses are available on-demand production. For P5K type of 8th digit of the part no. changes from 4 to 3.
e.g. Mated height 3.0 mm, 20 contacts for sockets: AXK520135P
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
2. P5KS
Part No.
Packing
Socket
Without V notch
Header
Product
name
Mated
height
No. of
contacts
Without V notch
Inner carton (1 reel)
Outer carton
and Ni barrier
product
and Ni barrier
product
(Paper reel)
(Paper reel)
(Paper reel)
(Recommendation)
(Recommendation)
(Paper reel)
AXK5S20047YG
(From Nov. 2005)
AXK6S20447YG
(From Nov. 2005)
20
24
AXK5S20045*
AXK5S24045*
AXK5S30045*
AXK5S40045*
AXK5S50045*
AXK5S60045*
AXK5S70045*
AXK5S80045*
AXK5S00045*
AXK5SA2075*
AXK5SA6075*
AXK5S20245*
AXK5S24245*
AXK5S30245*
AXK5S36245*
AXK5S40245*
AXK5S50245*
AXK5S60245*
AXK5S70245*
AXK5S80245*
AXK5S00245*
AXK5SA2275*
AXK5SA6275*
AXK5S20045*
AXK5S30045*
AXK5S34045*
AXK5S40045*
AXK5S50045*
AXK5S60045*
AXK5S70045*
AXK5S80045*
AXK5S00045*
AXK6S20445*
AXK6S24445*
AXK6S30445*
AXK6S40445*
AXK6S50445*
AXK6S60445*
AXK6S70445*
AXK6S80445*
AXK6S00445*
AXK6SA2475*
AXK6SA6475*
AXK6S20445*
AXK6S24445*
AXK6S30445*
AXK6S36445*
AXK6S40445*
AXK6S50445*
AXK6S60445*
AXK6S70445*
AXK6S80445*
AXK6S00445*
AXK6SA2475*
AXK6SA6475*
AXK6S20545P
AXK6S30545P
AXK6S34545P
AXK6S40545P
AXK6S50545P
AXK6S60545P
AXK6S70545P
AXK6S80545P
AXK6S00545P
AXK5S24047YG
(From Nov. 2005)
AXK6S24447YG
(From Nov. 2005)
AXK5S30047YG
(From Nov. 2005)
AXK6S30447YG
(From Nov. 2005)
30
AXK5S40047YG
(From Nov. 2005)
AXK6S40447YG
(From Nov. 2005)
40
AXK5S50047YG
(From Nov. 2005)
AXK6S50447YG
(From Nov. 2005)
50
AXK5S60047YG
(From Nov. 2005)
AXK6S60447YG
(From Nov. 2005)
4.0 mm
60
AXK5S70047YG
(From Nov. 2005)
AXK6S70447YG
(From Nov. 2005)
70
AXK5S80047YG
(From Nov. 2005)
AXK6S80447YG
(From Nov. 2005)
80
AXK5S00047YG
(From Nov. 2005)
AXK6S00447YG
(From Nov. 2005)
100
120
160
20
AXK5SA2077YG
(From Nov. 2005)
AXK6SA2477YG
(From Nov. 2005)
Note 2)
Note 2)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
AXK5SA6077YG
(From Nov. 2005)
AXK6SA6477YG
(From Nov. 2005)
AXK5S20247YG
(From Nov. 2005)
AXK6S20447YG
(From Nov. 2005)
AXK5S24247YG
(From Nov. 2005)
AXK6S24447YG
(From Nov. 2005)
“G” mark on end of
part No.;
1,500 pieces
“G” mark on end of
part No.;
3,000 pieces
24
AXK5S30247YG
(From Nov. 2005)
AXK6S30447YG
(From Nov. 2005)
30
AXK5S36247YG
(From Nov. 2005)
AXK6S36447YG
(From Nov. 2005)
36
AXK5S40247YG
(From Nov. 2005)
AXK6S40447YG
(From Nov. 2005)
40
P5KS
AXK5S50247YG
(From Nov. 2005)
AXK6S50447YG
(From Nov. 2005)
50
4.5 mm
AXK5S60247YG
(From Nov. 2005)
AXK6S60447YG
(From Nov. 2005)
60
AXK5S70247YG
(From Nov. 2005)
AXK6S70447YG
(From Nov. 2005)
70
AXK5S80247YG
(From Nov. 2005)
AXK6S80447YG
(From Nov. 2005)
80
AXK5S00247YG
(From Nov. 2005)
AXK6S00447YG
(From Nov. 2005)
100
120
160
20
AXK5SA2277YG
(From Nov. 2005)
AXK6SA2477YG
(From Nov. 2005)
AXK5SA6277YG
(From Nov. 2005)
AXK6SA6477YG
(From Nov. 2005)
AXK5S20047YG
(From Nov. 2005)
AXK6S20547YG
(From Nov. 2005)
AXK5S30047YG
(From Nov. 2005)
AXK6S30547YG
(From Nov. 2005)
30
AXK5S34047YG
(From Nov. 2005)
AXK6S34547YG
(From Nov. 2005)
34
Note 2)
Note 2)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
AXK5S40047YG
(From Nov. 2005)
AXK6S40547YG
(From Nov. 2005)
40
AXK5S50047YG
(From Nov. 2005)
AXK6S50547YG
(From Nov. 2005)
5.0 mm
50
“G” mark on end of
part No.;
“G” mark on end of
part No.;
AXK5S60047YG
(From Nov. 2005)
AXK6S60547YG
(From Nov. 2005)
60
Socket: 1,500 pieces Socket: 3,000 pieces
Header: 1,000 pieces Header: 2,000 pieces
AXK5S70047YG
(From Nov. 2005)
AXK6S70547YG
(From Nov. 2005)
70
AXK5S80047YG
(From Nov. 2005)
AXK6S80547YG
(From Nov. 2005)
80
AXK5S00047YG
(From Nov. 2005)
AXK6S00547YG
(From Nov. 2005)
100
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
Part No.
Packing
Socket
Without V notch
Header
Product
name
Mated
height
No. of
contacts
Without V notch
Inner carton (1 reel)
Outer carton
and Ni barrier
product
and Ni barrier
product
(Paper reel)
(Paper reel)
(Paper reel)
(Recommendation)
(Recommendation)
(Paper reel)
AXK5S20247YG
(From Nov. 2005)
AXK6S20547YG
(From Nov. 2005)
20
30
34
40
50
60
70
80
100
20
30
40
50
60
70
80
100
20
30
40
50
60
70
80
100
130
20
30
40
50
60
70
80
100
AXK5S20245*
AXK5S30245*
AXK5S34245*
AXK5S40245*
AXK5S50245*
AXK5S60245*
AXK5S70245*
AXK5S80245*
AXK5S00245*
AXK5S20045*
AXK5S30045*
AXK5S40045*
AXK5S50045*
AXK5S60045*
AXK5S70045*
AXK5S80045*
AXK5S00045*
AXK5S20245*
AXK5S30245*
AXK5S40245*
AXK5S50245*
AXK5S60245*
AXK5S70245*
AXK5S80245*
AXK5S00245*
AXK5SA3275*
AXK5S20340P
AXK5S30340P
AXK5S40340P
AXK5S50340P
AXK5S60340P
AXK5S70340P
AXK5S80340P
AXK5S00340P
AXK6S20545P
AXK6S30545P
AXK6S34545P
AXK6S40545P
AXK6S50545P
AXK6S60545P
AXK6S70545P
AXK6S80545P
AXK6S00545P
AXK6S20645P
AXK6S30645P
AXK6S40645P
AXK6S50645P
AXK6S60645P
AXK6S70645P
AXK6S80645P
AXK6S00645P
AXK6S20645P
AXK6S30645P
AXK6S40645P
AXK6S50645P
AXK6S60645P
AXK6S70645P
AXK6S80645P
AXK6S00645P
AXK6SA3675P
AXK6S20445*
AXK6S30445*
AXK6S40445*
AXK6S50445*
AXK6S60445*
AXK6S70445*
AXK6S80445*
AXK6S00445*
AXK5S30247YG
(From Nov. 2005)
AXK6S30547YG
(From Nov. 2005)
AXK5S34247YG
(From Nov. 2005)
AXK6S34547YG
(From Nov. 2005)
AXK5S40247YG
(From Nov. 2005)
AXK6S40547YG
(From Nov. 2005)
AXK5S50247YG
(From Nov. 2005)
AXK6S50547YG
(From Nov. 2005)
5.5 mm
6.0 mm
6.5 mm
7.0 mm
AXK5S60247YG
(From Nov. 2005)
AXK6S60547YG
(From Nov. 2005)
AXK5S70247YG
(From Nov. 2005)
AXK6S70547YG
(From Nov. 2005)
AXK5S80247YG
(From Nov. 2005)
AXK6S80547YG
(From Nov. 2005)
AXK5S00247YG
(From Nov. 2005)
AXK6S00547YG
(From Nov. 2005)
AXK5S20047YG
(From Nov. 2005)
AXK6S20647YG
(From Nov. 2005)
AXK5S30047YG
(From Nov. 2005)
AXK6S30647YG
(From Nov. 2005)
Note 2)
Note 2)
AXK5S40047YG
(From Nov. 2005)
AXK6S40647YG
(From Nov. 2005)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
AXK5S50047YG
(From Nov. 2005)
AXK6S50647YG
(From Nov. 2005)
AXK5S60047YG
(From Nov. 2005)
AXK6S60647YG
(From Nov. 2005)
“G” mark on end of
part No.;
Socket: 1,500 pieces Socket: 3,000 pieces
Header: 1,000 pieces Header: 2,000 pieces
“G” mark on end of
part No.;
AXK5S70047YG
(From Nov. 2005)
AXK6S70647YG
(From Nov. 2005)
AXK5S80047YG
(From Nov. 2005)
AXK6S80647YG
(From Nov. 2005)
AXK5S00047YG
(From Nov. 2005)
AXK6S00647YG
(From Nov. 2005)
P5KS
AXK5S20247YG
(From Nov. 2005)
AXK6S20647YG
(From Nov. 2005)
AXK5S30247YG
(From Nov. 2005)
AXK6S30647YG
(From Nov. 2005)
AXK5S40247YG
(From Nov. 2005)
AXK6S40647YG
(From Nov. 2005)
AXK5S50247YG
(From Nov. 2005)
AXK6S50647YG
(From Nov. 2005)
AXK5S60247YG
(From Nov. 2005)
AXK6S60647YG
(From Nov. 2005)
AXK5S70247YG
(From Nov. 2005)
AXK6S70647YG
(From Nov. 2005)
AXK5S80247YG
(From Nov. 2005)
AXK6S80647YG
(From Nov. 2005)
AXK5S00247YG
(From Nov. 2005)
AXK6S00647YG
(From Nov. 2005)
AXK5SA3277YG
(From Nov. 2005)
AXK6SA3677YG
(From Nov. 2005)
AXK5S20347YG
(From Nov. 2005)
AXK6S20447YG
(From Nov. 2005)
AXK5S30347YG
(From Nov. 2005)
AXK6S30447YG
(From Nov. 2005)
Note 2)
Note 2)
AXK5S40347YG
(From Nov. 2005)
AXK6S40447YG
(From Nov. 2005)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
AXK5S50347YG
(From Nov. 2005)
AXK6S50447YG
(From Nov. 2005)
AXK5S60347YG
(From Nov. 2005)
AXK6S60447YG
(From Nov. 2005)
“G” mark on end of
part No.;
“G” mark on end of
part No.;
AXK5S70347YG
(From Nov. 2005)
AXK6S70447YG
(From Nov. 2005)
Socket: 1,000 pieces Socket: 2,000 pieces
Header: 1,500 pieces Header: 3,000 pieces
AXK5S80347YG
(From Nov. 2005)
AXK6S80447YG
(From Nov. 2005)
AXK5S00347YG
(From Nov. 2005)
AXK6S00447YG
(From Nov. 2005)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
Part No.
Packing
Socket
Without V notch
Header
Product
name
Mated
height
No. of
contacts
Without V notch
Inner carton (1 reel)
Outer carton
and Ni barrier
product
and Ni barrier
product
(Paper reel)
(Paper reel)
(Paper reel)
(Recommendation)
(Recommendation)
(Paper reel)
AXK5S20347YG
(From Nov. 2005)
AXK6S20547YG
(From Nov. 2005)
20
30
40
50
60
70
80
100
20
30
40
50
60
70
80
100
AXK5S20340P
AXK5S30340P
AXK5S40340P
AXK5S50340P
AXK5S60340P
AXK5S70340P
AXK5S80340P
AXK5S00340P
AXK5S20340P
AXK5S30340P
AXK5S40340P
AXK5S50340P
AXK5S60340P
AXK5S70340P
AXK5S80340P
AXK5S00340P
AXK6S20545P
AXK6S30545P
AXK6S40545P
AXK6S50545P
AXK6S60545P
AXK6S70545P
AXK6S80545P
AXK6S00545P
AXK6S20645P
AXK6S30645P
AXK6S40645P
AXK6S50645P
AXK6S60645P
AXK6S70645P
AXK6S80645P
AXK6S00645P
AXK5S30347YG
(From Nov. 2005)
AXK6S30547YG
(From Nov. 2005)
AXK5S40347YG
(From Nov. 2005)
AXK6S40547YG
(From Nov. 2005)
AXK5S50347YG
(From Nov. 2005)
AXK6S50547YG
(From Nov. 2005)
8.0 mm
AXK5S60347YG
(From Nov. 2005)
AXK6S60547YG
(From Nov. 2005)
AXK5S70347YG
(From Nov. 2005)
AXK6S70547YG
(From Nov. 2005)
AXK5S80347YG
(From Nov. 2005)
AXK6S80547YG
(From Nov. 2005)
AXK5S00347YG
(From Nov. 2005)
AXK6S00547YG
(From Nov. 2005)
P5KS
1,000 pieces
2,000 pieces
AXK5S20347YG
(From Nov. 2005)
AXK6S20647YG
(From Nov. 2005)
AXK5S30347YG
(From Nov. 2005)
AXK6S30647YG
(From Nov. 2005)
AXK5S40347YG
(From Nov. 2005)
AXK6S40647YG
(From Nov. 2005)
AXK5S50347YG
(From Nov. 2005)
AXK6S50647YG
(From Nov. 2005)
9.0 mm
AXK5S60347YG
(From Nov. 2005)
AXK6S60647YG
(From Nov. 2005)
AXK5S70347YG
(From Nov. 2005)
AXK6S70647YG
(From Nov. 2005)
AXK5S80347YG
(From Nov. 2005)
AXK6S80647YG
(From Nov. 2005)
AXK5S00347YG
(From Nov. 2005)
AXK6S00647YG
(From Nov. 2005)
Notes) 1. Regarding ordering units: During production: Please make orders in 1 reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confirm proper mounting” on page 13.)
Samples: Small lot orders are possible. For models without V notch and Ni barrier, change the suffix “J” to the suffix “P,” or place a “P” where the “*” is located.
For V notch and Ni barrier models add “G” at the end of the part number.
2. The standard type comes without positioning bosses (However, mated heights of 4 mm or higher and 120 pins or more comes standard with bosses). Connectors
with positioning bosses are available for on-demand production. For P5KS type of 9th digit of the part no. changes from 4 to 3.
e.g. Mated height 4.0 mm, 20 contacts for sockets: AXK5S20037G
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
SPECIFICATIONS
1. Characteristics
Specifications
Item
Conditions
4mm, 4.5mm, 5mm,
5.5mm, 6mm, 6.5mm type
3mm, 3.5mm type
7mm, 8mm, 9mm type
Rated current
Rated voltage
0.5A/terminal (Max. 10A)
0.5A/terminal (Max. 16A)
60V AC/DC
150V AC for 1 min.
Min. 1000MΩ
Breakdown voltage
Detection current: 1mA
Using 500V DC megger
Electrical
characteristics
Insulation resistance
Contact resistance
Measured based on the HP4338B
measurement method of JIS C
5402
Max. 60mΩ
Max. 80mΩ
Composite insertion
force
Max. 0.785N {80gf} × no. of contacts (initial)
Min. 0.0588N {6gf} × no. of contacts
Composite removal
force
Mechanical
characteristics
Measures the maximum load in
the post axial direction until
removal
Post holding force
Min. 0.98N {100gf}/contacts
Ambient temperature
–55°C to +85°C
Max. peak temperature of 245°C
300°C within 5 sec.
No freezing at low temperatures
Infrared reflow soldering
Soldering iron
Soldering heat
resistance
Sequence
5 cycles,
insulation resistance
min. 100MΩ,
contact resistance
max. 80mΩ
Thermal shock
resistance (header
and socket mated)
1. –55–30 °C, 30 minutes
2. ~ , Max. 5 minutes
3. 85+30 °C, 30 minutes
4. ~ , Max. 5 minutes
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
120 hours, insulation resistance
min. 100MΩ,
Environmental
characteristics
Humidity resistance
(header and socket
mated)
120 hours, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
Bath temperature 40 2°C,
humidity 90 to 95% R.H.
contact resistance
max. 80mΩ
24 hours,
48 hours,
insulation resistance
min. 100MΩ,
Saltwater spray
resistance (header
and socket mated)
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
Bath temperature 35 2°C,
saltwarter concentration 5 1%
contact resistance
max. 80mΩ
H2S resistance
(header and socket
mated)
Bath temperature 40 2°C,
gas concentration 3 1 ppm,
humidity 75 to 80% R.H.
contact resistance
max. 80mΩ
48 hours,
50 times
contact resistance max. 60mΩ
Lifetime
Insertion and removal
characteristics life
Repeated insertion and removal
speed of max. 200 times/hours
P5K 3mm 30 contacts
P5KS 4mm 30 contacts
Socket: 0.17g Header: 0.09g
Socket: 0.18g Header: 0.16g
Unit weight
2. Material and surface treatment
Mated height 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 9mm
Part name
Material
Heat-resistant resin (UL94V-0)
Surface treatment
—
Molded portion
Contact/post
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
However, the area adjacent to the terminal on Ni barrier models is
exposed to Ni on base.
Copper alloy
mm General tolerance: 0.2
DIMENSIONS
P5K: Mated height 3mm, 3.5mm type
• Socket
A
B 0.1
0.5 0.05
0.5 0.05
0.2 0.03
2.35
2.15
(0.9)
4
Dimension table (mm)
5.8
No. of contacts
A
B
Suction
face
5
1.44
20
22
8.20
8.70
10.70
13.20
4.50
5.00
7.00
9.50
(0.9)
30
0.17 0.03
40
(Terminal flatness)
0.1
50
15.70 12.00
18.20 14.50
20.70 17.00
23.20 19.50
28.20 24.50
33.20 29.50
60
70
80
100
120
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
mm General tolerance: 0.2
• Header
A
C
B 0.1
D
0.5 0.05
0.2 0.03
0.5 0.05
(1.4)
1.8
Dimension table (mm)
4.6
Suction
face
1.44
3.8
No. of contacts
A
B
20
22
8.20
8.70
10.70
13.20
4.50
5.00
7.00
9.50
(1.4)
0.20 0.03
30
40
(Terminal flatness)
0.1
50
15.70 12.00
18.20 14.50
20.70 17.00
23.20 19.50
28.20 24.50
33.20 29.50
60
70
80
Mated height
3.0 mm
C
D
100
120
2.4
2.9
0.85
1.35
3.5 mm
• Socket and header are mated
Mated height
A
3.0 mm
3.5 mm
3.0
3.5
A+–00..21
Note) P5KS series (mated heights 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, and 9.0mm)
cannot be mated to this type.
P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type
• Socket
A
B 0.1
0.10
(1.10)
0.50 0.05
0.50 0.05
0.20 0.03
C
1.82
(Suction face)
Dimension table (mm)
5.4
No. of contacts
A
B
4.6
3.20
20
24
30
34
36
40
50
60
70
80
100
8.20
4.50
5.50
7.00
8.00
8.50
9.50
9.20
(1.10)
0.15 0.03
10.70
11.70
12.20
13.20
15.70 12.00
18.20 14.50
20.70 17.00
23.20 19.50
28.20 24.50
Mated height
C
4.0 mm, 5.0 mm, 6.0 mm 3.05
4.5 mm, 5.5 mm, 6.5 mm 3.55
7.0 mm, 8.0 mm, 9.0 mm 6.05
• Header
0.10
0.50 0.05
0.50 0.05
0.20 0.03
4.30
1.95
Dimension table (mm)
No. of contacts
A
B
20
24
30
34
36
40
50
60
70
80
100
8.20
4.50
5.50
7.00
8.00
8.50
9.50
9.20
B 0.1
A
10.70
11.70
12.20
13.20
15.70 12.00
18.20 14.50
20.70 17.00
23.20 19.50
28.20 24.50
Mated height
C
D
4.0 mm, 4.5 mm, 7.0 mm 0.95
5.0 mm, 5.5 mm, 8.0 mm 1.95
6.0 mm, 6.5 mm, 9.0 mm 2.95
3.3
4.3
5.3
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
• Socket and header are mated
mm General tolerance: 0.2
Mated height
4.0 mm
4.5 mm
5.0 mm
5.5 mm
6.0 mm
6.5 mm
7.0 mm
8.0 mm
9.0 mm
H
4.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
9.0
+0.2
H
–0.1
Note) P5K series (mated heights 3.0mm, 3.5mm)
cannot be mated to this type.
P5KS: Mated height 4.0mm, 4.5mm for 120 contacts and 160 contacts types, 6.5mm for 130 contacts type
• Socket
A
Terminal flatness
B 0.1
0.50 0.05
0.10
D
0.20 0.03
(1.10)
No. of contacts
A
B
C
4.6
3.20 5.4
120
130
160
32.50 29.50 32.00
35.00 32.00 34.50
42.50 39.50 42.00
(1.10)
0.45
3.00 0.08
Mated height
4.0 mm
D
3.05
0.50 0.05 dia.
C 0.1
4.5 mm, 6.5 mm 3.55
• Header
A
0.10
B 0.10
3.30
0.95
0.50 0.05
0.20 0.03
No. of contacts
A
B
C
120
130
160
32.50 29.50 31.00
35.00 32.00 33.50
42.50 39.50 41.00
Note 1)
0.50 0.05 dia.
C 0.10
Mated height
4.0 mm, 4.5 mm 3.30
6.5 mm 5.30
D
E
0.95
2.95
• Socket and header are mated
Mated height
4.0 mm
H
4.0
4.5
6.5
Notes) 1. Inquiry separately for diagrams of the
embossed tape and cautions for use.
2. Be sure to ask for proper specifications and
drawings before actual use.
+0.2
H
−0.1
4.5 mm
6.5 mm
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
EMBOSSED TAPE DIMENSIONS (unit:mm, Common for respective contact type, socket and header)
• Tape dimensions (Conforming to JIS C 0806-1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
• Plastic reel dimensions (Conforming to EIAJ ET-7200B)/
Paper reel dimensions (Conforming to JIS C 0806-1990)
Tape I
Tape II
A 0.3
A 0.3
E
C
B
1.75
1.75
Top cover tape
C
4
2
4
2
Emboss carrier tape
F
D
D
1.5+0.1 dia.
1.5+0.1 dia.
0
0
Dimension table (mm)
(1) Suffix: G (1 reel, 1,500 pieces or 1,000 pieces embossed tape and plastic reel package)
Type
Mated height
No. of contacts
20 to 50
Type of taping
Tape I
A
B
C
D
E
F
Quantity per reel
1,500 pcs.
24.0
32.0
44.0
56.0
24.0
32.0
44.0
56.0
—
11.5
14.2
20.2
26.2
11.5
14.2
20.2
26.2
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
25.4 1
33.4 1
45.4 1
57.4 1
25.4 1
33.4 1
45.4 1
57.4 1
380 dia.
380 dia.
380 dia.
380 dia.
380 dia.
380 dia.
380 dia.
380 dia.
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 7.0mm
60 to 70
Tape II
Tape II
Tape II
Tape I
28.4
40.4
52.4
—
80 to 100
120 to 160
20 to 50
P5KS
Socket: 7.0mm, 8.0mm, 9.0mm
Header: 5.0mm, 5.5mm, 6.0mm,
6.5mm, 8.0mm, 9.0mm
60 to 70
Tape II
Tape II
Tape II
28.4
40.4
52.4
1,000 pcs.
80 to 100
130
(2) Suffix: J (1 reel, 1,500 pieces embossed tape and paper reel package)
Type
Mated height
No. of contacts
20 to 50
Type of taping
Tape I
A
B
C
D
E
F
Quantity per reel
24.0
32.0
44.0
56.0
24.0
32.0
44.0
56.0
—
11.5
14.2
20.2
26.2
11.5
14.2
20.2
26.2
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
24.4+2
370 dia.
370 dia.
370 dia.
370 dia.
370 dia.
370 dia.
370 dia.
370 dia.
0
60 to 70
Tape II
Tape II
Tape II
Tape I
28.4
40.4
52.4
—
32.4+2
0
Socket and header are common
3.0mm, 3.5mm
P5K
80 to 100
120
44.4+2
0
56.4+2
0
1,500 pcs.
20 to 50
24.4+2
0
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 7.0mm
60 to 70
Tape II
Tape II
Tape II
28.4
40.4
52.4
32.4+2
0
P5KS
80 to 100
120 to 160
44.4+2
0
56.4+2
0
(3) Suffix: P (1 reel, 1,000 pieces embossed tape and paper reel package)
Type
Mated height
No. of contacts
20 to 50
60 to 70
80 to 100
120
Type of taping
Tape I
A
B
C
D
E
F
Quantity per reel
24.0
32.0
44.0
56.0
24.0
32.0
44.0
56.0
24.0
32.0
44.0
56.0
—
11.5
14.2
20.2
26.2
11.5
14.2
20.2
26.2
11.5
14.2
20.2
26.2
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
24.4+2
330 dia.
330 dia.
330 dia.
330 dia.
330 dia.
330 dia.
330 dia.
330 dia.
370 dia.
370 dia.
370 dia.
370 dia.
0
Tape II
Tape II
Tape II
Tape I
28.4
40.4
52.4
—
32.4+2
0
Socket and header are common
3.0mm, 3.5mm
P5K
44.4+2
0
56.4+2
0
20 to 50
60 to 70
80 to 100
120 to 160
20 to 50
60 to 70
80 to 100
130
24.4+2
0
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 7.0mm, 8.0mm
Tape II
Tape II
Tape II
Tape I
28.4
40.4
52.4
—
32.4+2
0
1,000 pcs.
44.4+2
0
56.4+2
0
P5KS
24.4+2
0
Tape II
Tape II
Tape II
28.4
40.4
52.4
32.4+2
0
Socket: 7.0mm, 8.0mm, 9.0mm
Header: 6.0mm, 6.5mm, 9.0mm
44.4+2
0
56.4+2
0
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
Connector orientation with respect to direction of progress of embossed tape
Type
Direction
of tape progress
P5K
P5KS (Less than 100 contacts)
Socket
P5KS 120, 130, 160 contacts
Socket
Socket
This corner is oriented on the C side.
This corner is oriented on the C side.
Header
Header
Header
Note: There is no indication on this product
regarding top-bottom or left-right
orientation.
This corner is oriented on the C side.
This corner is oriented on the C side.
NOTES
1. Prevention of reverse mating
Other than 120, 130, 160 contacts type,
the socket and header are protected from
reverse mating by a molded resin key.
Excessive mating force may damage the
key, so be sure to match chamfered
corners when mating.
• P5K Socket
• P5K Header
Recommended PC board pattern
Recommended PC board pattern
(TOP VIEW)
(TOP VIEW)
B 0.05
0.50 0.05
0.50 0.05
0.25 0.05
B 0.05
0.50 0.05
0.50 0.05
0.25 0.05
Outline (top view)
Chamfered corner
Chamfered corner
Chamfered corner
Chamfered corner
0.125 0.05
0.75 0.05
0.125 0.05
0.75 0.05
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 56%)
Metal mask thickness: Here, 150 µm
(Opening area ratio: 62%)
Mating state
B 0.01
B 0.01
0.50 0.01
0.23 0.01
0.50 0.01
0.50 0.01
0.23 0.01
0.50 0.01
Chamfered corner
2. PC Boards and Recommended
Metal Mask Patterns
Connectors are mounted with high
density, with a pitch interval of 0.4 to 0.5
mm. It is therefore necessary to make
sure that the right levels of solder are
used, in order to reduce solder bridge
and other issues. The figures to the right
are recommended metal mask patterns.
Please use them as a reference.
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Opening area ratio: 69%)
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Opening area ratio: 78%)
B 0.01
B 0.01
0.50 0.01
0.23 0.01
0.50 0.01
0.50 0.01
0.23 0.01
0.50 0.01
* See the dimension table on page 70 for more information on the B dimension of the socket and header.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type
• Socket
Recommended PC board pattern
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 60%)
Metal mask thickness: Here, 120 µm
(Opening area ratio: 76%)
(TOP VIEW)
B 0.05
B 0.01
B 0.01
0.50 0.05
0.25 0.05
0.50 0.05
0.50 0.01
0.23 0.01
0.50 0.01
0.50 0.01
0.23 0.01
0.50 0.01
0.125 0.05
0.75 0.05
* See the dimension table on page 71 for more information on the B dimension.
• Header
Recommended PC board pattern
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 69%)
Metal mask thickness: Here, 120 µm
(Opening area ratio: 87%)
(TOP VIEW)
B 0.01
0.50 0.01
0.23 0.01
B 0.01
0.50 0.01
0.23 0.01
B 0.05
0.50 0.01
0.50 0.01
0.50 0.05
0.25 0.05
0.50 0.05
0.125 0.05
0.75 0.05
* See the dimension table on page 71 for more information on the B dimension.
P5KS: Mated height 4.0mm, 4.5mm for 120 contacts and 160 contacts types, 6.5mm for 130 contacts type
• Socket
Recommended PC board pattern
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 60%)
Metal mask thickness: Here, 120 µm
(Opening area ratio: 76%)
(TOP VIEW)
B 0.01
B 0.01
0.50 0.01
0.23 0.01
0.50 0.01
0.50 0.01
0.23 0.01
0.50 0.01
B 0.05
2.40 0.05
(Pattern
3.00 0.05
(Positioning
boss
0.50 0.05
0.25 0.05
0.125 0.05
0.5 0.05
dimensions)
dimentions)
Min6.4
C 0.05
2-0.65 0.05 dia. (hole)
* See the dimension table on page 72 for more information on the B and C dimensions.
• Header
Recommended PC board pattern
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 69%)
Metal mask thickness: Here, 120 µm
(Opening area ratio: 87%)
(TOP VIEW)
B 0.01
B 0.01
0.50 0.01
0.23 0.01
0.50 0.01
0.50 0.01
0.23 0.01
0.50 0.01
B 0.05
2.00 0.05
(Pattern
2.10 0.05
(Positioning
boss
0.50 0.05
0.25 0.05
0.125 0.05
0.50 0.05
dimensions)
dimentions)
MIN 6.00
C 0.05
2-0.65 0.05 dia. (hole)
* See the dimension table on page 72 for more information on the B and C dimensions.
Regarding general notes, please refer
to page 12.
For other details, please verify with the
product specification sheets.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
相关型号:
AXK5S80235J
Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Socket
PANASONIC
AXK5S80235P
Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Socket
PANASONIC
AXK5S80245J
Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket
PANASONIC
AXK5S80245P
Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Socket, ROHS COMPLIANT
PANASONIC
AXK5S80330P
Board Stacking Connector, 80 Contact(s), 2 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Socket,
PANASONIC
AXK5SA2075J
Board Stacking Connector, 120 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket
PANASONIC
AXK5SA2075P
Board Stacking Connector, 120 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
PANASONIC
AXK5SA2275J
Board Stacking Connector, 120 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket
PANASONIC
©2020 ICPDF网 联系我们和版权申明