AXR51188P [PANASONIC]
Telecom and Datacom Connector, 18 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT;型号: | AXR51188P |
厂家: | PANASONIC |
描述: | Telecom and Datacom Connector, 18 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT |
文件: | 总16页 (文件大小:703K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Order Discontinued as of September 30, 2009
AXR(3/5)
FOR CELLULAR PHONE;
SYSTEM CONNECTORS ULTRA-LOW
ULTRA LOW PROFILE TYPE
PROFILE TYPE (AXR3)
FOR PORTABLE EQUIPMENT
(0.5mm PITCH)
I/O CONNECTORS FOR PORTABLE
EQUIPMENT (AXR5)
I/O connectors for portable equipment
Receptacle
18, 22, 24 and 26 contacts
FEATURES
1. Compact receptacle helps to design
lighter, slimmer, smaller devices.
I/O connector for portable equipment
• 18, 22, 24 and 26 contacts
5. Plugs with 22, 26 and 50 contacts
are also available in board mounting
types.These are ideal for such
applications as the connection
between PDAs and data-
Ultra low-profile
3.0mm
0.5mm pitch
communication cradles.
50 contacts
Receptacle
7.2mm
PC board
• 50 contacts
PC board
Ultra low-profile
3.5mm
0.5mm pitch
System connector ultra low profile type
Plug (cable connection type)
18, 22, 24 and 26 contacts
Plug
(Board mounting type)
8.0mm
2. Bellows-type contacts
Our bellows-type contacts resist mating
stress and offer high contact reliability.
The bellows type contacts are fabricated by
bending thin sheet metal. They offer reliable
contact since a rounded corner, instead of a
sharp edge, is used for tuning fork type contact.
I/O connectors for portable equipment
Plug (cable connection type)
50 contacts
Contact
Plug
side
Receptacle
side
3. Coaxial portion with switching
function (1 Form B configuration) can
be applied up to 2GHz.
4. Connection of incorrect pairs is
prevented by cross-manufacturer
mating error prevention key.
By changing the location of the mating
error prevention key, erroneous insertion
of a different connector is prevented.This
eliminates the chance of any problems
that may be caused by mistaken
connections. Please consult us for more
information.
System connector ultra low profile type
Plug (Board mounting type)
22, 26 and 50 contacts
Error prevention key
Customizable for several contacts.
Ask about details.
The key groove is different for every
customer.
Compliance with RoHS Directive
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
ORDERING INFORMATION
1. I/O connectors for portable equipment receptacle
2. System connectors ultra-low profile type plug
AXR
5
1
P
AXR
3
0
4
5: I/O connectors
for portable equipment
3: System connectors
ultra-low profile type
<Receptacle>
1: Receptacle
<Plug>
0: Plug
<No. of signal wire>
18: SIL 18 contacts
22: SIL 22 contacts
24: SIL 24 contacts
26: SIL 26 contacts
50: SIL 50 contacts
<No. of signal wire>
2: SIL 18 contacts
3: SIL 22 contacts
4: SIL 24 contacts
5: SIL 26 contacts
6: SIL 50 contacts
<Function>
<Applicable receptacle>
On board/
A type/B type board cutting/
board mounting
On board/board cutting
On board
No. of coaxial pin
Without
Positioning
boss
4
<Function>
Cable connection type/
4
8
B type
On board
A type
Not available
A type/B type Shield
Board mounting type
<Packing>
P: Embossed tape and paper reel × 2
0
1
3
4
5
A
A type
Available
B type
Cable connection type
A type
B type
A type
B type
Not
available
Board mounting type
Available
<Packing>
Nil: Embossed tape and paper reel × 2
* Board mounting type only.
3. I/O connectors for portable equipment plug
AXR
5
2
5
5: I/O connectors
for portable equipment
<Plug, A type/B type>
2: Plug A type
<No. of signal wire>
5: SIL 50 contacts
<Applicable cable dia.>
6: 5.5mm dia.
7: 6.2mm dia.
<Shield>
S: With shield
Note) Applicable for cable connection type 50 contacts
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
RECEPTACLE AND PLUG COMPATIBILITY TABLE
1. Signal terminals 18 to 50 contacts
1) Plug (Cable connection type)
• Plug
• Combination table
• Receptacle
Plug (A type)-Receptacle (A type) are mated
No. of signal terminals On board/board cutting Receptacle composite function Part No. (Plug) Part No. (Receptacle)
AXR5256S
AXR5257S
On board mounting
type
50 contacts
Signal terminals only
AXR51508P
A type
A type
Plug (B type)-Receptacle (A type) are mated
Design side
• Corresponds to on board mounting
type receptacle
• On board mounting
type
18, 24, 26 and
50 contacts
No. of signal terminals On board/board cutting Receptacle composite function Part No. (Plug) Part No. (Receptacle)
18 contacts
22 contacts
Signal terminals only
Signal terminals only
AXR30244
AXR51188P
AXR51228P
50 contacts
On board mounting
type
AXR30341
AXR30344
B type
B type
24 contacts
26 contacts
Signal terminals only
Signal terminals only
AXR30444
AXR30541
AXR51248P
AXR51268P
Design side
Plug (B type)-Receptacle (B type) are mated
• On board mounting
type
22 contacts
• Corresponds to on board mounting
type receptacle
18, 22, 24 and 26 contacts
No. of signal terminals On board/board cutting Receptacle composite function Part No. (Plug) Part No. (Receptacle)
On board mounting
type
AXR30341
AXR30344
22 contacts
Signal terminals only
AXR51224P
Plug (Board mounting type)
• Plug
• Combination table
• Receptacle
Plug (A type)-Receptacle (A type) are mated
No. of signal terminals On board/board cutting Receptacle composite function Part No. (Plug) Part No. (Receptacle)
On board mounting type Signal terminals only
A type
A type
22 contacts
AXR3034A
AXR51228P
Plug (A type)-Receptacle (B type) are mated
• Corresponds to on board mounting
type receptacle
22 contacts
• On board mounting
type
22, 26 and 50
contacts
B type
No. of signal terminals On board/board cutting Receptacle composite function Part No. (Plug) Part No. (Receptacle)
On board mounting type Signal terminals only
22 contacts
Plug (B type)-Receptacle (A type) are mated
AXR3034A
AXR51224P
B type
• Corresponds to on board mounting
type receptacle
22, 26 and 50 contacts
• On board mounting
type
22 contacts
No. of signal terminals On board/board cutting Receptacle composite function Part No. (Plug) Part No. (Receptacle)
26 contacts
50 contacts
AXR30545
AXR30645
AXR51268P
AXR51508P
On board mounting
type
Signal terminals only
Plug (B type)-Receptacle (B type) are mated
No. of signal terminals On board/board cutting Receptacle composite function Part No. (Plug) Part No. (Receptacle)
On board mounting type Signal terminals only
22 contacts
AXR30345
AXR51224P
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
3. Information about A and B types
• Plug
• Receptacle
1) Cable connection type
When the contact side and design side,
• face in the same direction it is A Type
• face in opposite directions it is B Type
When the contact side and mounting side,
• face face in opposite directions it is A Type
• face the in the same direction it is B Type
A type
B type
Design side
A type
Contact side
Design side
Mounting side
Contact side
Contact side
2) Board mounting type
When the contact side and mounting side,
• face in the same direction it is A Type
• face in opposite directions it is B Type
B type
A type
B type
Contact side
Mounting side
Mounting side
Mounting side
Contact side
Contact side
PRODUCT TYPES
1. Receptacle
Packing quantity
No. of
signal terminals
No. of
coaxial
Type
On board mounting type (A type)
No. of battery terminal
Part No.
Inner carton (1 reel)
1,000 pcs.
Outer carton
2,000 pcs.
2,000 pcs.
2,000 pcs.
2,000 pcs.
2,000 pcs.
1,500 pcs.
18 contacts
None
None
None
None
None
None
None
None
None
None
None
None
AXR51188P
AXR51228P
AXR51224P
AXR51248P
AXR51268P
AXR51508P
On board mounting type (A type)
On board mounting type (B type)
On board mounting type (A type)
On board mounting type (A type)
On board mounting type (A type)
1,000 pcs.
22 contacts
1,000 pcs.
24 contacts
26 contacts
50 contacts
1,000 pcs.
1,000 pcs.
750 pcs.
Note) For cellular phones and other applications where problems of insertion into the wrong device is possible, the location of the key will be changed for each order. An
order number will be set for each separate order.
2. Plug (Cable connection type)
Packing quantity
Inner carton
No. of
signal terminals
Applicable receptacle
On board mounting type
On board mounting type
Type
B type
B type
EMI immunity
Part No.
Outer carton
600 pcs.
600 pcs.
600 pcs.
600 pcs.
600 pcs.
200 pcs.
200 pcs.
18 contacts
Not available
Available
AXR30244
AXR30341
–
–
–
–
–
–
–
22 contacts
Not available
Not available
Available
AXR30344
24 contacts
26 contacts
On board mounting type
On board mounting type
On board mounting type
On board mounting type
B type
B type
A type
A type
AXR30444
AXR30541
Available
AXR5256S (for 5.5 dia. cable)
AXR5257S (for 6.2 dia. cable)
50 contacts
Available
Note) For cellular phones and other applications where problems of insertion into the wrong device is possible, the location of the key will be changed for each order. An
order number will be set for each separate order.
3. Plug (PC board mounting type)
Packing quantity
Inner carton
No. of
signal terminals
EMI
Type
Part No.
countermeasure
Outer carton
1,000 pcs.
1,000 pcs.
1,000 pcs.
1,000 pcs.
On board mounting type (A type)
On board mounting type (B type)
On board mounting type (B type)
On board mounting type (B type)
Available
Available
Available
Available
AXR3034A
AXR30345
AXR30545
AXR30645
500 pcs.
500 pcs.
500 pcs.
500 pcs.
22 contacts
26 contacts
50 contacts
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
SPECIFICATIONS
1. Characteristics
1) Receptacle–Plug (cable connection type)
Specifications
26 contacts
Item
Condition
—
18 , 22, 24 contacts
50 contacts
Signal
contact
0.5 A (1 A can be passed through two terminals connected in series)
(Total for all terminals is max. 10 A.)
Rated
Current
Battery
contact
Characteristic of receptacle
alone.
2 A
—
Measured based on the
milliohmmeter measurement
method of JIS C 5402, except for
the resistance of the cord on the
plug side.
Signal
contact
Max. 110mΩ (Initial)
Contact
Electrical
characteristics
resistance
Measured based on the
milliohmmeter measurement
method of JIS C 5402, except for
the resistance of the terminals
on the battery side.
Battery
contact
Max. 50mΩ (Initial)
—
Using 500V DC megger
(applied for 1 min.)
Insulation resistance
Breakdown voltage
Lever lock strength
Min. 1,000MΩ (Initial)
Rated voltage is applied for one
minute and check for short circuit
or damage with a detection
current of 1 mA.
150V AC for 1 min.
Min. 49N {5kgf}
Mechanical
characteristics
The plug is pulled off with the
connectors mated.
Mechanical life:
5,000 times (mechanical
insertion and removal)
Contact resistance after
testing:
Mechanical life: 10,000 times
Contact resistance after testing:
Max. 110mΩ
The connectors are connected
and disconnected at a rate of
200 times/hour or less.
Lifetime
characteristics
Insertion and removal life
of plug and receptacle
Max. 110mΩ
No freezing or condensation in
low temperatures
Ambient temperature
Storage temperature
–35°C to +65°C
–40°C to +70°C (The allowable storage temperature is
–40°C to +50°C if unopened from original packaging)
No freezing or condensation in
low temperatures
Environmental
characteristics
Surface temperature (shell) from
infrared reflow soldering
machine
Resistance
Receptacle
Reflow soldering: peak temperature 245°C or less
to soldering
heat
Plug
Hand soldering: Soldering iron temperature 300°C, 5 sec. or less
—
Receptacle (AXR51508P)
50 contacts: 1.42 g
Plug (AXR5256S)
50 contacts: 11.1 g
Receptacle (AXR35371P) 22 contacts: 0.86 g
Plug (AXR30341) 22 contacts: 6.18 g
Unit weight
—
2) Receptacle–Plug (Board mounting type)
Specifications
Item
Condition
—
22, 26, 50 contacts
Rated
current
Signal
contact
0.5 A (7 A can be passed through all terminals connected)
(The total for 50 terminals is max. 10 A.)
22 contacts (A type) Max. 110 mΩ (Initial)
22 contacts (B type) Max. 140 mΩ (Initial)
26 contacts (B type) Max. 110 mΩ (Initial)
50 contacts (B type) Max. 110 mΩ (Initial)
Contact
resistance
Signal
contact
Measured based on the milliohmmeter measurement
method of JIS C 5402
Electrical
characteristics
Insulation resistance
Breakdown voltage
Min. 1,000MΩ (Initial)
Using 500V DC megger (applied for 1 min.)
Rated voltage is applied for one minute and check for short
circuit or damage with a detection current of 1 mA.
150 V AC for 1 min.
Mechanical life: 5,000 times
Contact resistance after testing: Max. 110 mΩ
(Contact resistance after testing satisfies initial value.)
Lifetime
characteristics
Insertion and removal life
of plug and receptacle
The connectors are connected and disconnected at a rate
of 200 times/hour or less.
Ambient temperature
Storage temperature
–35°C to +65°C
–40°C to +70°C (The allowable storage temperature is
–40°C to +50°C if unopened from original packaging)
No freezing or condensation in low temperatures
No freezing or condensation in low temperatures
Environmental
characteristics
Resistance
to soldering Plug
heat
Surface temperature (shell) from infrared reflow soldering
machine
Reflow soldering: peak temperature 245°C or less
22 contacts (A type): 1.43 g, 22 contacts (B type): 1.53 g,
26 contacts (B type): 1.48 g, 50 contacts (B type): 2.30 g
Unit weight
—
Note) Refer to above table for the characterics of the receptacle.
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
2. Material and surface treatment
Portion
Material
Heat resistant resin (UL94V-0)
Stainless steel
Surface
—
Resin-molding portion
Shell
Cu plating base, Sn plating on surface
Contact portion: Ni plating on base, PdNi + Au flash plating on surface
Terminal portion: Ni plating on base, Au plating on surface
(except for end of the terminal)
Post
Copper alloy
Copper alloy
Receptacle
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface
(except for end of the terminal)
Battery contact
Heat resistant resin (UL94V-0)
Only bushing is polyurethane resin (UL94HB)
Resin-molding portion
—
—
Shell
Plug
Stainless steel
(cable connection
type)
Contact portion: Ni plating on base, PdNi + Au flash plating on surface
Signal wire soldering portion: Ni plating on base, Au plating on surface
Contact
Copper alloy
Tapping screw
Carbon steel
Rust proofed
Insulation plate
Phenolic resin or PBT
Heat resistant resin (UL94V-0)
Stainless steel
—
—
Resin-molding portion
Plug
Shell
Cu plating base, Sn plating on surface
(Board mounting
type)
Contact portion: Ni plating on base, PdNi + Au flash plating on surface
Terminal portion: Ni plating on base, Au plating on surface
(except for end of the terminal)
Contact
Copper alloy
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
DIMENSIONS (Unit: mm)
1. Signal terminals 18 contacts/On board mounting type
Recommended PC board pattern
(TOP VIEW)
• Receptacle (A type)
AXR51188P
8.5 0.15
0.5 0.1
0.2 0.05
8.5 0.05
0.5 0.05
0.25 0.05
A
A-A cross section
A
0.10
Signal terminal
coplanarity
1.0
5.0
Note) 1.3
Note) 4.5
13.3
0.6 0.05
Please make pattern
both side of PC board
1.9
Through hole
13.7
13.0 0.05
1.5 0.1
4.4 0.2
Notes) 1. The position of the cross-manufacturer mating error
prevention key, if requested, can be set for each user
when the detailed specifications are being decided.
2. Since product bottom is a metal shell, do not make
pattern circuits (to prevent shorting).
0.3 0.05
13.0 0.2
General tolerance: 0.3
• Plug (cable connection type) (B type)
(assembled condition)
AXR30244
8.5 0.15
0.5 0.1
Note) The position of the cross-manufacturer mating error
prevention key, if requested, can be set for each user
when the detailed specifications are being decided.
23.7
20.5
7.8
12.6
Note)
4.5
3.0
Note)
1.15
0.3
15.0
19.0
21.7
11.7
General tolerance: 0.3
No. of signal terminal (A type)
Terminal No.1
Terminal No.18
Signal terminal
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
2. Signal terminals 22 contacts/On board mounting type
• Receptacle (A type)
AXR51228P
Recommended PC board pattern
(TOP VIEW)
CAD Data
10.5 0.05
0.25 0.05
0.5 0.05
A-A cross section
0.10
Signal terminal
coplanarity
0.5 0.05
1.0
5.0
15.0 0.05
1.9 0.1
Through hole
Please make pattern
both side of PC board
Notes) 1. The position of the cross-manufacturer mating error
prevention key, if requested, can be set for each user
when the detailed specifications are being decided.
2. Since product bottom is a metal shell, do not make
pattern circuits (to prevent shorting).
General tolerance: 0.3
• Receptacle (B type)
AXR51224P
Recommended PC board pattern
(TOP VIEW)
CAD Data
10.5 0.15
Terminal No.22
Terminal No.1
0.5 0.1
0.2 0.05
A
10.5 0.05
0.25 0.05
0.5 0.05
A-A cross section
0.5 0.05
0.10
Signal terminal
coplanarity
A
1.0
15.3 0.2
15.7 0.2
1.9 0.1
Through hole
Both side of
PC board
5.0
15.0 0.05
Notes) 1. The position of the cross-manufacturer mating error
prevention key, if requested, can be set for each user
when the detailed specifications are being decided.
2. Since product bottom is a metal shell, do not make
pattern circuits (to prevent shorting).
1.2 0.1
4.4 0.2
15.0 0.2
General tolerance: 0.3
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
• Plug (cable connection type) (B type)
0.5 0.1
(assembled condition)
AXR30341
AXR30343
Notes) 1. The drawing shows AXR30344. (External
dimensions are the same also for AXR30341.)
2. The position of the cross-manufacturer mating error
prevention key, if requested, can be set for each user
when the detailed specifications are being decided.
CAD Data
10.5 0.15
23.7
20.5
14.6 0.2
7.8
3.0
15.0
19.0
21.7
11.7
General tolerance: 0.3
• Plug (Board mounting type) (B type)
AXR30345
Recommended PC board pattern
(TOP VIEW)
CAD Data
23.0 0.1
17.6 0.1
21.0
18.0
10.50 0.05
0.50 0.05
0.25 0.05
10.50 0.15
Terminal No.1
Terminal No.22
0.5 0.1
0.20 0.05
A
A
0.4 0.1
1.6 0.1
12.00 0.05
17.85 0.05
Through hole
(14.6 0.2)
Please make pattern both side of PC board
16.0 0.2
14.6 0.2
12.0 0.2
17.85 0.2
1.2 0.1
Note) This product is not
compatible with
mismatch prevention
keys.
(10.0)
0.15
Shell SMD portion
coplanarity
A-A cross section
0.10
Signal terminal
coplanarity
General tolerance: 0.3
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
• Plug (Board mounting type) (A type)
AXR3034A
mm General tolerance: 0.3
Recommended PC board pattern
(TOP VIEW)
CAD Data
22.8 0.1
17.6 0.1
14.0 0.05
10.5 0.05
0.50 0.05
20.8
18.0
10.5 0.15
0.5 0.1
0.2 0.05
4.4
Through hole
0.25 0.05
B
B
0.4 0.1
1.6 0.1
17.85 0.05
(14.6 0.2)
16.0 0.2
Both side of PC board
14.6 0.2
A
A
0.15
1.2 0.1
10.5
Shell SMD portion
coplanarity
17.85 0.2
A-A cross section
0.10
Signal terminal coplanarity
B-B cross section
(4.4)
14.0 0.2
mm General tolerance: 0.3
3. Signal terminals 24 contacts/On board mounting type
• Receptacle (A type)
AXR51248P
Recommended PC board pattern
(TOP VIEW)
11.5 0.15
CAD Data
0.5 0.1
0.2 0.05
A
11.5 0.05
0.25 0.05
0.50 0.05
A-A cross section
0.10
Signal terminal
coplanarity
0.5 0.05
A
1.0
16.3 0.2
16.7
Through hole
5.0
9.0
13.0
1.9
Please make pattern
both side of PC board
Note 1) 4.8 Note 1) 4.8
16.0 0.05
Notes) 1. The position of the cross-manufacturer mating error
prevention key, if requested, can be set for each user
when the detailed specifications are being decided.
2. Since product bottom is a metal shell, do not make
pattern circuits (to prevent shorting).
1.5 0.1
16.0 0.2
4.4 0.2
(#) The dimensions for the improper connection prevention key are set
by the customer.
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
mm General tolerance: 0.3
• Plug (cable connection type) (B type)
(assembled condition)
0.5 0.1
AXR30444
CAD Data
Note) The position of the cross-manufacturer mating error
prevention key, if requested, can be set for each user
when the detailed specifications are being decided.
11.5 0.15
23.7
20.5
15.6 0.2
Note) 4.8 Note) 4.8
7.8
3.0
15.0
19.0
21.7
11.7
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
4. Signal terminals 26 contacts/On board mounting type
mm General tolerance: 0.3
• Receptacle (A type)
AXR51268P
Recommended PC board pattern
(TOP VIEW)
CAD Data
17.0 0.05
12.5 0.05
17.8 0.2
12.5 0.15
Please make pattern
both side of PC board
0.25 0.05
0.5 0.1
0.2 0.05
Through hole
A
1.0
A
5.0
9.0
13.0
17.3 0.2
17.8
0.5 0.05
1.9 0.1
Note) Since product bottom is a metal shell, do not
make pattern circuits (to prevent shorting).
14.5
10.5
1.0
1.0
1.0
1.0
A-A cross section
0.10
Signal terminal
coplanarity
1.5 0.1
10.5
14.5
4.4 0.2
17.0 0.2
mm General tolerance: 0.3
• Plug (cable connection type) (B type)
(assembled condition)
AXR30541
0.50 0.1
CAD Data
Note) This product is not compatible with mismatch
prevention keys.
12.5 0.15
25.7
22.5
16.7 0.2
7.8
3.0
17.0
21.0
11.7
23.7
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
mm General tolerance: 0.3
• Plug (Board mounting type) (B type)
AXR30545
Recommended PC board pattern
CAD Data
(TOP VIEW)
24.0 0.1
20.6 0.1
12.5 0.05
0.50 0.05
0.25 0.05
23.0
20.0
12.5 0.15
0.5 0.1
0.2 0.05
A
A
0.4 0.1
1.6 0.1
19.85 0.05
Through hole
Please make pattern
both side of PC board
(16.6 0.2)
18.0 0.2
Note) This product is not compatible with mismatch
prevention keys.
16.6 0.2
1.2 0.1
16.0 0.2
19.85 0.2
(10.0)
0.15
Shell SMD portion
coplanarity
A-A cross section
0.10
Signal terminal
coplanarity
No. of signal terminal (A type)
Terminal No.1
Terminal No.26
Signal terminals
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
5. Signal terminals 50 contacts/On board mounting type
mm General tolerance: 0.3
• Receptacle (A type)
AXR51508P
Recommended PC board pattern
(TOP VIEW)
33.5
Terminal No.1
CAD Data
Terminal No.50
A
A-A cross section
(MIN. 32.6)
30.3 0.05
(MAX. 25.3)
0.15
Signal terminal
coplanarity
24.5 0.05
(0.27)
(0.27)
0.5 0.05
0.25 0.05
A
27.4
30.0 0.2
27.4
23.4
1.0
1.0
+0.1
2-0.55
(hole)
–0.05
1.0
0.3 0.1
1.0
23.4
28.85
2.15 0.05
2.1 0.15
PC board edge
Pattern forbidden area
3.65
Retention fitting
PC board both sides
hole structure
30.3
Notes)
1. The values in parenthesis are reference dimensions.
2. To reinforce the shell portion of the receptacle, have the
shell guided by the casing in some way.The gap between
the device casing and receptacle should be constructed
to be very small, for example, under 0.1 mm.
3. The dimensions of the cross-manufacturer mating error
prevention key, if requested, can be set for each user.
0.5 0.15 (Terminal portion)
0.2 0.05
24.5
0.15
Lot display
mm General tolerance: 0.3
• Plug (cable connection type) (A type)
(assembled condition)
AXR5256S
AXR5257S
CAD Data
Incorrect mating
prevention key
Terminal
No.1
Terminal
No.50
)
Note 2
37.7
34.3
29.9
8.0
2.7
(
)
1.0
(
)
23.7
10.7
31.5
35.8
Notes)
1. The values in parenthesis are reference dimensions.
2. The dimensions of the cross-manufacturer mating error
prevention key, if requested, can be set for each user.
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
mm General tolerance: 0.3
• Plug (Board mounting type)
AXR30645
39.0
36.0
25.3
24.5
Recommended PC board pattern
(TOP VIEW)
0.5 0.1
Terminal No.1
Terminal No.50
0.2 0.05
A
A-A cross section
A
16.0
24.0
0.15
Signal terminal
coplanarity
29.9
31.35
32.9
28.0 0.2
0.15
Shell SMD portion
coplanarity
1.2 0.1
3.3 0.2
Through hole
Both side of
PC board
35.85
Notes)
1. The values in parenthesis are reference dimensions.
2. To reinforce the shell portion of the receptacle, have the
shell guided by the casing in some way.The gap between
the device casing and receptacle should be constructed
to be very small, for example, under 0.1 mm.
3. The dimensions of the cross-manufacturer mating error
prevention key, if requested, can be set for each user.
APPLICATIONS
Products can be made to match your applications, so please contact us if necessary.
A type products (18, 22 and 26 contacts)
B type products (50 contacts)
panasonic-electric-works.net/ac
Order Discontinued as of September 30, 2009
AXR(3/5)
EMBOSSED TAPE DIMENSIONS (unit: mm)
• Tape dimensions (Conforming to JIS C 0806, 1995.
However, some tapes have mounting hole pitches that do not
comply with the standard.)
• Reel dimensions (Conforming to JIS C 0806, 1995)
E+20
0.3
A
B
Top cover tape
C
1.75
4
2
Embossed carrier tape
F
D
1.5 00.1 dia.
1. Receptacle
A
B
C
D
E
F
Quantity per reel
1,000
I/O connector for portable equipment
18, 22, 24 and 26 contacts
32.0
44.0
28.4
14.2
16.0
32.4
370 dia.
I/O connector for portable equipment
50 contacts
40.4
20.2
16.0
44.4
370 dia.
750
2. Plug (PC board mounting type)
A
B
C
D
E
F
Quantity per reel
22 and 26 contacts
50 contacts
44.0
56.0
40.4
52.4
20.2
26.2
24.0
24.0
44.4
56.4
370 dia.
370 dia.
500
500
• Connector orientation with respect to direction of progress of embossed tape
Type
Plug
Direction of
tape progress
I/O connector for portable equipment Receptacle
(Board mounting type)
For other details, please verify with the
product specification sheets.
panasonic-electric-works.net/ac
相关型号:
AXR5121
Telecom and Datacom Connector, 12 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle
PANASONIC
AXR51224P
Telecom and Datacom Connector, 22 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR51228P
Telecom and Datacom Connector, 22 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR51248P
Telecom and Datacom Connector, 24 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR5125
Telecom and Datacom Connector, 12 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle
PANASONIC
AXR51268
USB Connector, 26 Contact(s), Female, Right Angle, Surface Mount Terminal, Guide Slot, Plug
PANASONIC
AXR51268P
Telecom and Datacom Connector, 26 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR51508P
Telecom and Datacom Connector, 50 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
PANASONIC
AXR5154
Telecom and Datacom Connector, 50 Contact(s), Female, Surface Mount Terminal, Receptacle
PANASONIC
AXR5157
Telecom and Datacom Connector, 50 Contact(s), Female, Surface Mount Terminal, Receptacle
PANASONIC
©2020 ICPDF网 联系我们和版权申明