AXR71161P [PANASONIC]
Telecom and Datacom Connector, 16 Contact(s), Male, Surface Mount Terminal, Receptacle;型号: | AXR71161P |
厂家: | PANASONIC |
描述: | Telecom and Datacom Connector, 16 Contact(s), Male, Surface Mount Terminal, Receptacle 连接器 |
文件: | 总3页 (文件大小:78K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AXR(7)
I/O CONNECTORS
FOR PORTABLE
EQUIPMENT
ULTRA LOW-PROFILE
RECEPTACLE OF 2.9 mm
FEATURES
1. Ultra low-profile receptacle of 2.9
mm
4. Bellows contacts are resistant to
mating stress
2. Plug construction which accepts
any direction (topside up or upside
down) for mounting receptacles onto
the boards
Since the lock is released in the sideways
direction, it does not matter which direc-
tion applies to the receptacle mounting
on the telephone main unit.
• What is bellows contacts ?
The bellows type contacts are fabri-
cated by bending thin sheet metal.
They offer reliable contact since a
rounded corner, instead of a sharp
edge, is used for tuning fork type con-
tact.
Plug
Receptacle
(Assembly is possible regardless of
whether the plug unit is top side or bot-
tom side up.)
Contact
Receptacle
side
Plug side
Mark indicating which is
the top side
Top side
Mounting on
the PC board
5. Expected operational life
In excess of 10,000 insertions and
removal.
Mounting under
the PC board
Plug cover
Bottom side
Plug
Receptacle
APPLICATIONS
3. A metal shell has been incorporated
to yield a construction which is rug-
ged and immune from EMI (for protec-
tion from external noise)
PHS and several for portable equipments
SPECIFICATIONS
1. Characteristics
Item
Specifications
0.5A
Conditions
Rated current
Insulation resistance
Breakdown voltage
Contact resistance
Min. 1,000MΩ (initial)
250V AC for 1 min.
Max. 70mΩ
Using 500V DC megger (applied for 1 min.)
Detection current: 1mA
Electrical
characteristics
Not including the conductive resistance of the cable
No freezing at low temperatures
Ambient temperature
–55 to +85°C
Insertion and removal life
10,000 times
Reflow soldering for receptacle
Manual soldering for plug
Peak temperature Max. 245°C
Max. 300°C 5 sec.
AWG #28
Receptacle’s surface temperature
Resistance to
soldering heat
Applicable cord
Unit weight (receptacle)
0.66 g
2. Material and surface treatment
Component
Material
Surface
—
Resin-molding portion
Heat resistant resin (UL94V-0)
Stainless steel
Shell
SnPb plating over Ni
Receptacle
PdNi plating + Au flash over Ni
Contact portion:
Post
Copper alloy
SnPb plating over Ni (Except
Terminal portion:
for thick of terminal)
Resin-molding portion
Heat resistant resin (UL94V-0)
Stainless steel
—
—
Shell
Plug
Contact portion:
PdNi plating + Au flash over Ni
Terminal portion: SnPb plating over Ni
Contact
Copper alloy
PRODUCT TYPES
Packing quantity
No. of contacts
Type
Part No.
Inner carton (1 reel)
1,000 pcs.
Outer carton
with positioning boss
without positioning boss
with EMI resistance
AXR71161P
AXR71162P
AXR72161
AXR72166
Receptacle
2,000 pcs.
200 pcs.
16
Plug
—
without EMI resistance
86
AXR(7)
mm General tolerance: ±0.3
DIMENSIONS
Recommended PC board pattern
• Receptacle
A-A
(TOP VIEW)
No. 16 terminal
No. 1 terminal
Holding
metal
1.25±0.2
Post
15.7±0.05
12.0±0.05
Shell
Body
0.8±0.05
0.25±0.1
0.5±0.05
4.0±0.2
0.9
0.7±0.2
15.5±0.2
(Soldering portion)
0.75±0.2
2.9±0.2
0.3±0.1
17.35
16.75+00.15
14.2±0.05
19.8±0.05
0.8±0.1
(Contact portion)
12.0±0.2
0.7
Note) Positioning boss
0.15
2-0.7±0.1 dia.
+0.1
−0
13.2
14.3
+0
3.45±0.15
2.0
−0.1
Notes) 1. The type without the positioning boss has the
dimensions given above but without the boss
part. This means that there is no need to provide
the two holes with a 0.9 mm - 0.1/0 mm diameter
indicated in the diagram showing the recom-
mended processing of the PCB.
6.3±0.15
7.0
7.2
0.25±0.1
0.8±0.1 (Terminal portion)
12.0±0.2
15.7±0.15
18.4
2. Since product bottom is a metal shell, do not
make pattern circuits (to prevent shorting).
• Plug (assembled condition)
14.6−00.15
1.65−00.15
0.8±0.08
No. 16 teminal
No. 1 terminal
12.0±0.1
2.25−00.15
2.03±0.2
16.7−00.15
6.6
26.1
15.5
0.44±0.12
6.7
3.0±0.15
4.0
7.0
32.3
(Applicable cable:
5.0 to 5.7 dia.)
7.7
9.5
87
AXR(7)
mm
EMBOSSED TAPE AND REEL
• Tape dimensions
• Reel dimensions
However, some tapes have mounting hole pitches that do not
comply with the standard.)
A±0.3
B
E+20
C
1.75
Top cover tape
4
2
Embossed carrier tape
F
D
1.5±00.1 dia.
A
B
C
D
E
F
Quantity per reel
1,000
Receptacle
32.0
28.4
14.2
16.0
32.4
370 dia.
• Connector orientation with respect to direction of progress of
embossed tape
Type
Receptacle
Direction of
tape progress
NOTES
1. Receptacle
3) This product has a holder to prevent
1) This product comes with a positioning
boss. A positioning hole must be pro-
vided at the PCB design stage.
The connector has two projections for
positioning. When designing PC board
pattern, holes for the projections are nec-
essary.
2) This product features a metal shell
around the molded part in order to pro-
vide ruggedness and immunity from EMI.
However, when the case is designed to
enable mating to be accomplished even
more reliably, the following points should
be borne in mind.
• Provide a guide at the plug insertion
opening to prevent excessive mating
stress when the plug is mated.
• In order to reinforce the shell part of the
receptacle, guide the shell part using
the case.
the pin soldering from lifting off. However,
care should be taken in designing the
equipment so that excessive lift-off force
will not be applied to the soldered area of
each pin.
2. Plug
Precautions for cord soldering
1) Take steps to prevent the soldering
iron from melting the plastic parts.
2) Take care not to allow bubbles into the
solder or short-circuiting between neigh-
boring pins to occur.
3) Do not allow the solder flux to run into
the contact area since this will cause
defective contact.
4) Upon completion of the lead wire sol-
dering, crimp the cable clamp area of the
lock arm shell to achieve a strain relief
function.
• Ensure that the equipment case and
receptacle are configured in such a way
that the clearance between them is min-
imal—in the 0.1 mm range, for instance.
Regarding general notes, please
refer to page 10.
12/1/2002
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog
相关型号:
AXR71162P
Telecom and Datacom Connector, 16 Contact(s), Male, Surface Mount Terminal, Receptacle
PANASONIC
AXRB9000
High Stability Low Noise Rubidium Frequency Reference in 19â rack (2 HU) with up to 3 outputs
AXTAL
AXRB9000_18
High Stability Low Noise Rubidium Frequency Reference in 19â rack (2 HU) with up to 3 outputs
AXTAL
©2020 ICPDF网 联系我们和版权申明