AXT460124 [PANASONIC]
Narrow pitch connectors (0.4mm pitch) Connectors for inspection available; 窄间距连接器（ 0.4mm间距）连接器可检测
| 型号： | AXT460124 |
| 厂家： | 
PANASONIC |
| 描述： | Narrow pitch connectors (0.4mm pitch) Connectors for inspection available |
| 文件： | 总15页 (文件大小：510K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
For board-to-board For board-to-FPC
Narrow pitch connectors
(0.4mm pitch)
P4S Series
FEATURES
1. Space-saving (3.6 mm widthwise)
Smaller compared to P4 series with
soldering terminals (30 pin contacts):
Socket — 38% smaller,
3. Greater flexibility in connector
placement.
Pattern wiring to the connector bottom is
made possible with a molded covering on
the undersurface of the connector.
Header — 34% smaller
<Socket>
<Header>
Socket
Header
Pickup cover (Material: SUS)
(Both covered and uncovered
types are available.)
Soldering terminals
at each corner
Socket
RoHS compliant
Soldering terminals
at each corner
Soldering terminals
at each corner
Connector bottom:
Create any thru-hole and pattern wiring.
8.70 (30 pin contacts)
3.60
4. Gull-wing-shaped terminals to
facilitate visual inspections.
5. Connectors for inspection available
Pickup cover (Material: LCP)
(Both covered and uncovered
types are available.)
Soldering terminals
at each corner
APPLICATIONS
Header
Mobile devices, such as cellular
phones, digital still cameras and
digital video cameras.
7.90 (30 pin contacts)
2.35
2. Strong resistance to adverse
environments! Utilizes
“
” construction
for high contact reliability.
ORDERING INFORMATION
AXT
4
3: Narrow Pitch Connector P4S (0.4 mm pitch) Socket
4: Narrow Pitch Connector P4S (0.4 mm pitch) Header
Number of pins (2 digits)
Mated height
<Socket>
1: For mated height 1.5 mm and 2.0 mm
2: For mated height 2.5 mm and 3.0 mm
<Header>
1: For mated height 1.5 mm and 2.5 mm
2: For mated height 2.0 mm
3: For mated height 3.0 mm
Functions
<Socket/Header>
2: Without pickup cover, without positioning bosses
6: With pickup cover, without positioning bosses
Surface treatment (Contact portion / Terminal portion)
<Socket> 4: Ni plating on base, Au plating on surface (for Ni barrier available)
<Header> 4: Ni plating on base, Au plating on surface
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
PRODUCT TYPES
Part number
Packing
Mated height
Number of pins
Socket
Header
Inner carton
Outer carton
10
16
20
22
24
26
30
32
34
36
38
40
44
46
50
54
60
64
70
80
90
100
40
90
100
20
30
40
60
80
100
20
30
60
80
100
AXT310124
AXT316124
AXT320124
AXT322124
AXT324124
AXT326124
AXT330124
AXT332124
AXT334124
AXT336124
AXT338124
AXT340124
AXT344124
AXT346124
AXT350124
AXT354124
AXT360124
AXT364124
AXT370124
AXT380124
AXT390124
AXT300124
AXT340124
AXT390124
AXT300124
AXT320224
AXT330224
AXT340224
AXT360224
AXT380224
AXT300224
AXT320224
AXT330224
AXT360224
AXT380224
AXT300224
AXT410124
AXT416124
AXT420124
AXT422124
AXT424124
AXT426124
AXT430124
AXT432124
AXT434124
AXT436124
AXT438124
AXT440124
AXT444124
AXT446124
AXT450124
AXT454124
AXT460124
AXT464124
AXT470124
AXT480124
AXT490124
AXT400124
AXT440224
AXT490224
AXT400224
AXT420124
AXT430124
AXT440124
AXT460124
AXT480124
AXT400124
AXT420324
AXT430324
AXT460324
AXT480324
AXT400324
1.5mm
3,000 pieces
6,000 pieces
2.0mm
2.5mm
3,000 pieces
3,000 pieces
6,000 pieces
6,000 pieces
3.0mm
3,000 pieces
6,000 pieces
Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please contact our sales office.
Samples: Small lot orders are possible. Please consult us.
2. If you require the pickup cover, change the eighth digit of the part number from “2” to “6” in your order. Note that the pickup cover is not available for some types
depending on the number of pins. Check the latest product specifications.
3. The above part numbers are for connectors without positioning bosses, which are standard.When ordering connectors with positioning bosses, please contact our
sales office.
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
SPECIFICATIONS
1. Characteristics
Item
Specifications
0.3A/pin contact (Max. 5 A at total pin contacts)
60V AC/DC
Conditions
Rated current
Rated voltage
—
—
Rated voltage is applied for one minute and check for
short circuit or damage with a detection current of 1mA.
Breakdown voltage
Electrical
150V AC for 1 min.
Min. 1,000MΩ (initial)
Max. 90mΩ
characteristics
Using 250V DC megger
(applied for 1 min.)
Insulation resistance
Based on the contact resistance measurement method
specified by JIS C 5402.
Contact resistance
Composite insertion force
Max. 0.981N/pin contacts × pin contacts (initial)
Min. 0.0588N/pin contacts × pin contacts
Mechanical
Composite removal force
characteristics
Contact holding force
(Socket contact)
Measuring the maximum force.
As the contact is axially pull out.
Min. 0.981N/pin contacts
Ambient temperature
–55°C to +85°C
No freezing at low temperatures
Max. peak temperature of 260°C (on the surface of the
PC board around the connector terminals)
Infrared reflow soldering
Soldering heat resistance
300°C within 5 sec. or 350°C within 3 sec.
Soldering iron
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
Storage temperature
No freezing at low temperatures
Conformed to MIL-STD-202F, method 107G
Order Temperature (°C) Time (minutes)
0
1
2
3
4
–55−3
30
Max. 5
30
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Thermal shock resistance
(header and socket mated)
85+3
Environmental
characteristics
0
Max. 5
0
–55−3
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Humidity resistance
(header and socket mated)
Temperature 40 2°C,
humidity 90 to 95% R.H.
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Saltwater spray resistance
(header and socket mated)
Temperature 35 2°C,
saltwater concentration 5 1%
Temperature 40 2°C,
gas concentration 3 1 ppm,
humidity 75 to 80% R.H.
H2S resistance
(header and socket mated)
48 hours,
contact resistance max. 90mΩ
Lifetime
characteristics
Repeated insertion and removal speed of
max. 200 times/hours
Insertion and removal life
50 times
Mated height 1.5mm,
20 pin contact type: Socket: 0.04 g Header: 0.02 g
Unit weight
2. Material and surface treatment
Part name
Material
Surface treatment
Molded portion
LCP resin (UL94V-0)
—
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for front edge of terminal)
However, the area adjacent to the socket terminal is exposed to Ni on base.
Soldering terminals portion;
Socket: Ni plating on base, Pd + Au flash plating on surface
(Expect for front edge of terminal)
Contact and Post
Copper alloy
Header: Ni plating on base, Au plating on surface
(Expect for front edge of terminal)
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (Unit: mm)
1. Socket (Mated height: 1.5mm, 2.0mm, 2.5mm, 3.0mm)
• Without pickup cover
CAD Data
Dimension table (mm)
Number of pins/
dimension
A
B
C
10
16
20
22
24
26
30
32
34
36
38
40
44
46
50
54
60
64
70
80
90
100
4.70
5.90
1.60
2.80
3.50
4.70
A
Terminal coplanarity
0.08
(Contact and
soldering terminals)
E
B 0.1
6.70
3.60
5.50
0.40 0.05
0.15 0.03
7.10
4.00
5.90
7.50
4.40
6.30
7.90
4.80
6.70
8.70
5.60
7.50
9.10
6.00
7.90
9.50
6.40
8.30
9.90
6.80
8.70
10.30
10.70
11.50
11.90
12.70
13.50
14.70
15.50
16.70
18.70
20.70
22.70
7.20
9.10
7.60
9.50
8.40
10.30
10.70
11.50
12.30
13.50
14.30
15.50
17.50
19.50
21.50
8.80
9.60
10.40
11.60
12.40
13.60
15.60
17.60
19.60
(0.66)
Y (Note)
Z (Note)
Mated height/
dimension
E
1.5mm
2.0mm
2.5mm
3.0mm
1.45
1.45
2.45
2.45
0.30 0.03
C 0.1
General tolerance: 0.2
• With pickup cover
A
B 0.1
Terminal coplanarity
0.08
E
0.40 0.05
0.15 0.03
(Contact and
soldering terminals)
Pickup cover
(0.66)
Y (Note)
Z (Note)
0.30 0.03
C 0.1
General tolerance: 0.2
Note: Since soldering terminals are built into the body, the Y and Z parts are connected electrically.
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
2. Header (Mated height: 1.5mm, 2.5mm)
• Without pickup cover
CAD Data
Dimension table (mm)
A
Terminal coplanarity
0.08
(Post and
soldering terminals)
1.24
Number of pins/
dimension
B 0.1
A
B
C
D
0.40 0.05
0.15 0.03
10
16
20
22
24
26
30
32
34
36
38
40
3.90 1.60 3.20 5.40
5.10 2.80 4.40 6.60
5.90 3.60 5.20 7.40
6.30 4.00 5.60 7.80
6.70 4.40 6.00 8.20
7.10 4.80 6.40 8.60
7.90 5.60 7.20 9.40
8.30 6.00 7.60 9.80
8.70 6.40 8.00 10.20
9.10 6.80 8.40 10.60
9.50 7.20 8.80 11.00
9.90 7.60 9.20 11.40
44
46
50
54
60
64
70
80
90
100
10.70 8.40 10.00 12.20
11.10 8.80 10.40 12.60
11.90 9.60 11.20 13.40
12.70 10.40 12.00 14.20
13.90 11.60 13.20 15.40
Soldering terminals
14.70 12.40 14.00
–
0.15 0.03
C 0.1
15.90 13.60 15.20 17.40
17.90 15.60 17.20 19.40
19.90 17.60 19.20 21.40
21.90 19.60 21.20 23.40
General tolerance: 0.2
• With pickup cover
D
B 0.1
0.40 0.05
0.15 0.03
Terminal coplanarity
0.08
(Contact and
soldering terminals)
1.64
Pickup cover
Soldering terminals
0.15 0.03
C 0.1
A
General tolerance: 0.2
Note: The soldering terminal dimensions of headers with mated heights of 1.5mm/2.5mm and 2.0mm/3.0mm are different.
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
3. Header (Mated height: 2.0mm)
• Without pickup cover
CAD Data
A
Terminal coplanarity
0.08
(Post and
soldering terminals)
B 0.1
0.40 0.05
1.74
0.15 0.03
Soldering terminals
Dimension table (mm)
Number of pins/
dimension
A
B
C
D
0.15 0.03
C 0.1
40
9.90 7.60 9.20 11.40
19.90 17.60 19.20 21.40
21.90 19.60 21.20
90
100
–
General tolerance: 0.2
• With pickup cover
D
Terminal coplanarity
0.08
B 0.1
2.14
0.40 0.05
0.15 0.03
(Contact and
soldering terminals)
Pickup cover
Soldering terminals
0.15 0.03
C 0.1
A
General tolerance: 0.2
Note: The soldering terminals dimensions of headers with mated heights of 1.5mm/2.5mm and 2.0mm/3.0mm are different.
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
4. Header (Mated height: 3.0mm)
• Without pickup cover
CAD Data
A
Terminal coplanarity
0.08
(Post and
soldering terminals)
2.24
B 0.1
0.40 0.05
0.15 0.03
Soldering terminals
Dimension table (mm)
Number of pins/
dimension
A
B
C
D
–
20
30
5.90 3.60 5.20
7.90 5.60 7.20 9.40
0.15 0.03
C 0.1
60
80
13.90 11.60 13.20
–
17.90 15.60 17.20 19.40
100
21.90 19.60 21.20
–
General tolerance: 0.2
• With pickup cover
D
Terminal coplanarity
0.08
(Post and
soldering terminals)
B 0.1
2.64
0.40 0.05
0.15 0.03
X
X
Pickup cover
Soldering terminals
0.15 0.03
C 0.1
A
General tolerance: 0.2
Note: The soldering terminals dimensions of headers with mated heights of 1.5mm/2.5mm and 2.0mm/3.0mm are different.
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
Socket and Header are mated
Header
Socket
Header
Socket
Header
Socket
Header
Socket
EMBOSSED TAPE DIMENSIONS (unit: mm, Common for respective contact type, socket and header)
• Tape dimensions (Conforming to JIS C 0806:1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
• Plastic reel dimensions (Conforming to EIAJ ET-7200B)
Tape I
Tape II
A 0.3
Taping reel
A 0.3
D 1
Label
C
B
1.75
1.75
Top cover tape
C
Embossed carrier tape
4
2
4
2
Embossed mounting-hole
8.0
8.0
1.5+0.1 dia.
1.5+0.1 dia.
0
0
Dimension table (mm)
Number of pins
Socket
(with/without pickup cover)
Header
Mated height
Type of taping
A
B
C
D
Quantity per reel
Header
(with pickup cover)
(without pickup cover)
Max. 24
26 to 70
72 to 100
—
Max. 24
26 to 64
66 to 90
100
Tape I
Tape I
Tape II
Tape II
16.00
24.00
32.00
44.00
—
7.50
11.50
14.20
20.20
17.50
25.50
33.50
45.50
3,000
3,000
3,000
3,000
Common for
socket and header:
1.5mm, 2.0mm,
—
28.40
40.40
2.5mm and 3.0mm
Connector orientation with respect to direction of progress of embossed tape
Type
Common for P4S
Direction of
tape progress
Socket
Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
For board-to-board For board-to-FPC
Connectors for
inspection usage
(0.4mm pitch)
P4S Series
FEATURES
APPLICATIONS
1. 3,000 mating and unmating cycles
2. Same external dimensions and foot
pattern as standard type.
Ideal for module unit inspection and
equipment assembly inspection
3. Improved mating
Insertion and removal easy due to a
reduction in mating retention force. This
is made possible by a simple locking
structure design.
Note: Mating retention force cannot be
warranted.
Socket
Header
RoHS compliant
TABLE OF PRODUCT TYPES
✩: Available for sale
Product name
Number of pins
10
16
20
22
24
26
30
32
34
36
38
40
44
50
54
60
70
80
90
100
P4S
for inspection
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
Notes: 1. You can use with each mated height in common.
2. The pickup surface shape of the inspection sockets is different from that of the standard sockets. (For details, refer to the product specification diagram.)
3. Please inquire about number of pins other than those shown above.
4. Please inquire with us regarding availability.
5. Please keep the minimum order quantities no less than 50 pieces per lot.
6. Please inquire if further information is needed.
PRODUCT TYPES
Specifications
Part No.
Specifications
Part No.
With pickup cover Without positioning bosses
AXT3E∗∗66
AXT3E∗∗26
With pickup cover Without positioning bosses
AXT4E∗∗66
AXT4E∗∗26
Socket
Header
No pickup cover
Without positioning bosses
No pickup cover
Without positioning bosses
Notes: 1. When placing an order, substitute the “∗” (asterisk) in the above part number with the number of pins for the specific connector.
2. The above part numbers are for connectors without positioning bosses, which are standard.When ordering connectors with positioning bosses, please contact our
sales office.
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
NOTES
1. As shown below, excess force
during insertion may result in damage
to the connector or removal of the
solder. Also, to prevent connector
damage please confirm the correct
position before mating connectors.
Socket
Header
(Mated height: 1.5mm, 2.0mm, 2.5mm
and 3.0mm)
Recommended PC board pattern (TOP VIEW)
(Mated height: 1.5mm and 2.5mm)
Recommended PC board pattern (TOP VIEW)
0.95 0.03
0.70 0.03
0.80 0.03
0.45 0.03
0.23 0.03
: Insulation area
0.40 0.03
2. Keep the PC board warp no more
than 0.03mm in relation to the overall
length of the connector.
0.23 0.03
0.40 0.03
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: When 150 µm
(Terminal portion opening area ratio: 48%)
(Metal portion opening area ratio: 100%)
Metal mask thickness: When 150 µm
(Terminal portion opening area ratio: 49%)
(Metal portion opening area ratio: 100%)
0.80 0.01
0.45 0.01
0.95 0.01
0.70 0.01
Max. 0.03 mm
Max. 0.03 mm
3. If extra resistance to shock caused
by dropping is required, we
recommend using P4 Series.
4. Recommended PC board and metal
mask patterns
Connectors are mounted with high pitch
density, intervals of 0.35 mm, 0.4 mm or
0.5 mm.
0.20 0.01
0.40 0.01
0.20 0.01
0.40 0.01
In order to reduce solder and flux rise,
solder bridges and other issues make
sure the proper levels of solder is used.
The figures to the right are recommended
metal mask patterns. Please use them as
a reference.
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: When 120 µm
(Terminal portion opening area ratio: 60%)
(Metal portion opening area ratio: 100%)
Metal mask thickness: When 120 µm
(Terminal portion opening area ratio: 60%)
(Metal portion opening area ratio: 100%)
0.95 0.01
0.70 0.01
0.80 0.01
0.45 0.01
0.20 0.01
0.40 0.01
0.20 0.01
0.40 0.01
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
AXT3, 4
Header
Please refer to the latest product
specifications when designing your
product.
(Mated height: 2.0mm, 3.0mm)
Recommended PC board pattern (TOP VIEW)
0.80 0.03
0.45 0.03
0.23 0.03
: Insulation area
0.40 0.03
Recommended metal mask pattern
Metal mask thickness: When 150 µm
(Terminal portion opening area ratio: 49%)
(Metal portion opening area ratio: 100%)
0.80 0.01
0.45 0.01
0.20 0.01
0.40 0.01
Recommended metal mask pattern
Metal mask thickness: When 120 µm
(Terminal portion opening area ratio: 60%)
(Metal portion opening area ratio: 100%)
0.80 0.01
0.45 0.01
0.20 0.01
0.40 0.01
Note: The recommended PC board pattern
diagrams and metal mask pattern diagrams
for headers with mated heights of 1.5 mm/
2.5 mm and 2.0 mm/3.0 mm are different.
ACCTB14E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
Notes on Using Narrow pitch Connectors
Regarding the design of devices and PC board patterns
1) When connecting several connectors
together by stacking, make sure to
maintain proper accuracy in the design of
structure and mounting equipment so
that the connectors are not subjected to
twisting and torsional forces.
2) With mounting equipment, there may
be up to a 0.2 to 0.3-mm error in
positioning. Be sure to design PC boards
and patterns while taking into
5) For all connectors of the narrow pitch
series, to prevent the PC board from
coming off during vibrations or impacts,
and to prevent loads from falling directly
on the soldered portions, be sure to
design some means to fix the PC board
in place.
backside of the FPC board to which the
connector is being connected. Please
make the reinforcement board
dimensions bigger than the outer limits of
the recommended PC board pattern
(should be approximately 1 mm greater
than the outer limit).
Material should be glass epoxy or
polyimide, and the thickness should be
between 0.2 and 0.3 mm.
Example) Secure in place with screws
Screw
consideration the performance and
abilities of the required equipment.
3) Some connectors have tabs embossed
on the body to aid in positioning. When
using these connectors, make sure that
the PC board is designed with positioning
holes to match these tabs.
4) To ensure the required mechanical
strength when soldering the connector
terminals, make sure the PC board
meets recommended PC board pattern
design dimensions given.
(2) Collisions, impacts, or turning of FPC
boards, may apply forces on the
connector and cause it to come loose.
Therefore, make to design retaining
plates or screws that will fix the connector
in place.
7) The narrow pitch connector series is
designed to be compact and thin.
Although ease of handling has been
taken into account, take care when
mating the connectors, as displacement
or angled mating could damage or
deform the connector.
Connector
Spacer
Spacer
PC board
When connecting PC boards, take
appropriate measures to prevent the
connector from coming off.
6) Notes when using a FPC.
(1) When the connector is soldered to an
FPC board, during its insertion and
removal procedures, forces may be
applied to the terminals and cause the
soldering to come off. It is recommended
to use a reinforcement board on the
Regarding the selection of the connector placement machine and the mounting
procedures
1) Select the placement machine taking
into consideration the connector height,
required positioning accuracy, and
packaging conditions.
2) Be aware that if the catching force of
the placement machine is too great, it
may deform the shape of the connector
body or connector terminals.
3) Be aware that during mounting,
external forces may be applied to the
connector contact surfaces and terminals
and cause deformations.
4) Depending on the size of the
6) Excessive mounter chucking force may
deform the molded or metal part of the
connector. Consult us in advance if
chucking is to be applied.
connector being used, self alignment
may not be possible. In such cases, be
sure to carefully position the terminal with
the PC board pattern.
5) The positioning bosses give an
approximate alignment for positioning on
the PC board. For accurate positioning of
the connector when mounting it to the PC
board, we recommend using an
automatic positioning machine.
ACCTB48E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
Notes on Using Narrow pitch Connectors
Regarding soldering
1. Reflow soldering
Soldering conditions
2. Hand soldering
1) Measure the recommended profile
temperature for reflow soldering by
placing a sensor on the PC board near
the connector surface or terminals. (The
setting for the sensor will differ depending
on the sensor used, so be sure to
carefully read the instructions that comes
with it.)
Please use the reflow temperature profile
conditions recommended below for
reflow soldering. Please contact us
before using a temperature profile other
than that described below (e.g. lead-free
solder).
1) Set the soldering iron so that the tip
temperature is less than that given in the
table below.
Table A
Product name
Soldering iron temperature
300°C within 5 sec.
350°C within 3 sec.
SMD type connectors
• Narrow pitch connectors
(except P8 type)
2) As for cream solder printing, screen
printing is recommended.
2) Do not allow flux to spread onto the
connector leads or PC board. This may
lead to flux rising up to the connector
inside.
3) Touch the soldering iron to the foot
pattern. After the foot pattern and
connector terminal are heated, apply the
solder wire so it melts at the end of the
connector terminals.
Upper limited (Solder heat resistance)
Lower limited (Solder wettability)
Temperature
3) To determine the relationship between
the screen opening area and the PC-
board foot pattern area, refer to the
diagrams in the recommended patterns
for PC boards and metal masks. Make
sure to use the terminal tip as a reference
position when setting. Avoid an excessive
amount of solder from being applied,
otherwise, interference by the solder will
cause an imperfect contact.
Peak temperature
Peak temperature 260°C
230°C
220°C
200°C
Preheating
60 to 120 sec.
180°C
150°C
25 sec.
70 sec.
Time
• Narrow pitch connector (P8)
Temperature
Apply the solder
wire here
Peak temperature
245°C max.
200°C
Preheating
155 to 165°C
Terminal
Terminal
Paste
Small angle as
60 to 120 sec.
possible up to
45 degrees
Within 30 sec.
Time
solder
PC board
foot pattern
PC board
For products other than the ones above,
please refer to the latest product
specifications.
7) The temperatures are measured at the
surface of the PC board near the
connector terminals. (The setting for the
sensor will differ depending on the sensor
used, so be sure to carefully read the
instructions that comes with it.)
8) The temperature profiles given in this
catalog are values measured when using
the connector on a resin-based PC
board. When performed reflow soldering
on a metal board (iron, aluminum, etc.) or
a metal table to mount on a FPC, make
sure there is no deformation or
discoloration of the connector beforehand
and then begin mounting.
9) Consult us when using a screen-
printing thickness other than that
recommended.
10) Some solder and flux types may
cause serious solder or flux creeping.
Solder and flux characteristics should be
taken into consideration when setting the
reflow soldering conditions.
Pattern
4) Consult us when using a screen-
printing thickness other than that
recommended.
5) When mounting on both sides of the
PC board and the connector is mounting
on the underside, use adhesives or other
means to ensure the connector is
properly fixed to the PC board. (Double
reflow soldering on the same side is
possible.)
6) N2 reflow, conducting reflow soldering
in a nitrogen atmosphere, increases the
solder flow too greatly, enabling wicking
to occur. Make sure that the solder feed
rate and temperature profile are
appropriate.
4) Be aware that soldering while applying
a load on the connector terminals may
cause improper operation of the
connector.
5) Thoroughly clean the soldering iron.
6) Flux from the solder wire may get on
the contact surfaces during soldering
operations. After soldering, carefully
check the contact surfaces and clean off
any solder before use.
7) For soldering of prototype devices
during product development, you can
perform soldering at the necessary
locations by heating with a hot-air gun by
applying cream solder to the foot pattern
beforehand. However, at this time, make
sure that the air pressure does not move
connectors by carefully holding them
down with tweezers or other similar tool.
Also, be careful not to go too close to the
connectors and melt any of the molded
components.
8) If an excessive amount of solder is
applied during manual soldering, the
solder may creep up near the contact
points, or solder interference may cause
imperfect contact.
3. Solder reworking
1) Finish reworking in one operation.
2) For reworking of the solder bridge, use
a soldering iron with a flat tip. To prevent
flux from climbing up to the contact
surfaces, do not add more flux.
3) Keep the soldering iron tip temperature
below the temperature given in Table A.
ACCTB48E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
Notes on Using Narrow pitch Connectors
Handling Single Components
1) Make sure not to drop or allow parts to
4) Do not insert or remove the connector
when it is not soldered. Forcibly applied
Excessive force applied for insertion in a
pivot action as shown may also cause
product breakage.
Align the header and socket positions
before connecting them.
fall from work bench
2) Excessive force applied to the
terminals could cause warping, come
out, or weaken the adhesive strength of
the solder. Handle with care.
external pressure on the terminals can
weaken the adherence of the terminals to
the molded part or cause the terminals to
lose their evenness.
3) Repeated bending of the terminals
may cause terminals to break.
5) Excessive prying-force applied to one
end may cause product breakage and
separation of the solder joints at the
terminal.
3) Since some powerful cleaning
solutions may dissolve molded
components of the connector and wipe
off or discolor printed letters, we
recommend aqua pura electronic parts
cleaners. Please consult us if you wish to
use other types of cleaning fluids.
4) Please note that the surfaces of
molded parts may whiten when cleaned
with alcohol.
Cleaning flux from PC board
Handling the PC board
1) To increase the cleanliness of the
cleaning fluid and cleaning operations,
prepare equipment for cleaning process
beginning with boil cleaning, ultrasonic
cleaning, and then vapor cleaning.
2) Carefully oversee the cleanliness of
the cleaning fluids to make sure that the
contact surfaces do not become dirty
from the cleaning fluid itself.
• Handling the PC board after
mounting the connector
When cutting or bending the PC board
after mounting the connector, be careful
that the soldered sections are subjected
to excessive force.
The soldered areas should not be subjected to force.
Storage of connectors
1) To prevent problems from voids or air
pockets due to heat of reflow soldering,
avoid storing the connectors in areas of
high humidity. When storing the
Some connectors may change color
slightly if subjected to ultraviolet rays
during storage.This is normal and will not
affect the operation of the connector.
3) When storing the connectors with the
PC boards assembled and components
alreeady set, be careful not to stack them
up so the connectors are subjected to
excessive forces.
4) Avoid storing the connectors in
locations with excessive dust. The dust
may accumulate and cause improper
connections at the contact surfaces.
connectors for more than six months, be
sure to consider storage area where the
humidity is properly controlled.
2) Depending on the connector type, the
color of the connector may vary from
connector to connector depending on
when it is produced.
Other Notes
1) These products are made for the
design of compact and lightweight
devices and therefore the thickness of the
molded components has been made very
thin. Therefore, be careful during
insertion and removal operations for
excessive forces applied may damage
the products.
3) Before soldering, try not to insert or
remove the connector more than
absolutely necessary.
4) When coating the PC board after
soldering the connector to prevent the
deterioration of insulation, perform the
coating in such a way so that the coating
does not get on the connector.
6) The connectors are not meant to be
used for switching.
7) Be sure not to allow external pressure
to act on connectors when assembling
PCBs or moving in block assemblies.
2) Dropping of the products or rough
mishandling may bend or damage the
terminals and possibly hinder proper
reflow soldering.
5) There may be variations in the colors
of products from different production lots.
This is normal.
ACCTB48E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
Notes on Using Narrow pitch Connectors
Regarding sample orders to confirm proper mounting
When ordering samples to confirm
proper mounting with the placement
machine, connectors are delivered in 50-
piece units in the condition given right.
Consult a sale representative for ordering
sample units.
Please refer to the latest product
specifications when designing your
product.
Condition when delivered from manufacturing
Reel
(Delivery can also be made on a reel by
customer request.)
Required number
of products for
Embossed tape
amount required for
the mounting
sample production
(Unit 50 pcs.)
ACCTB48E 201303-T
Panasonic Corporation Automation Controls Business Division
industrial.panasonic.com/ac/e/
相关型号：
AXT460164
Card Edge Connector, 60 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
PANASONIC
AXT470164
Card Edge Connector, 70 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
PANASONIC
AXT480164
Card Edge Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
PANASONIC
AXT480364
Card Edge Connector, 80 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
PANASONIC
AXT490164
Card Edge Connector, 90 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明