AZ7121F [PANASONIC]
Snap Acting/Limit Switch, DPDT, Momentary, 0.4A, 115VDC, 14mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT;
| 型号： | AZ7121F |
| 厂家： | 
PANASONIC |
| 描述： | Snap Acting/Limit Switch, DPDT, Momentary, 0.4A, 115VDC, 14mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT 开关 光电二极管 |
| 文件： | 总4页 (文件大小：582K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ML (AZ7)
Limit Switches
COMPACT SIZE SIDE
LIMIT SWITCHES
•ꢀꢀLongꢀlife
More than 107 mechanical operations.
•ꢀꢀGreat mechanical strength while being compact and lightweight
Strong plastic outer cover cap with excellent mechanical
characteristics.
M4 bolt can be used for mounting.
•ꢀ The overtravel (O.T.) is large with great shock absorption
•ꢀ Dust-proof and oil resistant
Flushed with the diaphragm and the compressed rubber ring
Conforms to UL/CSA TÜV standards.
PRODUCT TYPE
1. Standard type
Actuator
Short push plunger
Push plunger
Part No.
AZ7100
AZ7110
AZ7120
AZ7121
AZ7124
AZ7140
AZ7141
AZ7144
AZ7310
AZ7311
AZ7312
AZ7166
Hinge lever
Roller lever
One-way roller lever
Hinge short lever
Short roller lever
One-way short roller lever
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Flexible rod
Note 1. Cadmium free contact types are available on a custom-made basis.
Please add an “F” to the end of the part number when ordering.
FOREIGN STANDARDS
Standards
Applicable product
Part No.
File No.
Ratings
: E-122222
UL
: 10A 250V AC
Product type : Standard type only
File No.
Ratings
: LR55880
CSA
TÜV
: 10A 250V AC
Order by standard part No.
Product type : Standard type only
File No.
Ratings
: J9551204
: AC-15 2A/250V~
Product type : Standard type only
SPECIFICATIONS
1. Rating
Motor or lamp load
Load
Resistive load (cosφ]1)
Inductive load (cosφ]0.4)
Rated control voltage
N.C. contact
N.O. contact
125V AC
250V AC
115V DC
10A
10A
0.4A
6A
4A
3A
1.5A
–
1.5A
1A
–
0.05A
10/2010
22
ML (AZ7)
2.Characteristics
Contact arrangement
1 Form C
Initial contact resistance, max.
Initial insulation resistance (At 500V DC)
15mΩ* (By voltage drop 6 to 8V DC at rated current)
Min. 100 mΩ
1,500 Vrms for 1 min between non-consecutive terminals
2,000 Vrms for 1 min between dead metal parts and each terminal
2,000 Vrms for 1 min between ground and each terminal
Initial breakdown voltage
In the free position
Max. 98m/s2 {10G}
Shock resistance
In the full operating position
Max. 294m/s2 {30G}
Vibration resistance
55 Hz, double amplitude of 1.5 mm
107 (at 50 cpm)
2 x 105 (at 20 cpm)
Mechanical
Electrical
Expected life
(Min. operation)
Ambient temperature/Ambient humidity
Max. operating speed
–20 to +60°C –4 to +140°F/Max. 95% R.H. (at 20°C 68°F)
120 cpm
*The resistance of a copper wire is not included.
3.EN60947-5-1 performance
DATA
Item
Rated insulation voltage (Ui)
Rated impulse withstand voltage (Uimp)
Switching over voltage
Rating
1. Life curve
250VAC
2.5kV
108
2.5kV
Rated enclosed thermal current (Ithe)
Conditional short-circuit current
Short-circuit protection device
Protective construction
10A
107
106
105
100A
10A fuse
IP64 (switch)
3
Pollution degree
φ
4. Operating characteristics
Movement
Characteristics
Pretravel
(P.T.), max.
mm inch
Overtravel
(O.T.), min.
mm inch
O.F. (N{gf}) R.F. (N{gf})
max.
Differential
(M.D.), max.
mm inch
Operating Position
(O.P.) mm inch
5
10
min.
Actuator
(
)
A
Load current
Short push plunger
Push plunger
5.88 {600}
5.88 {600}
1.47 {150}
1.77 {180}
1.96 {200}
2.16 {200}
2.35 {240}
2.75 {280}
5.88 {600}
5.88 {600}
0.98 {100}
0.98 {100}
0.39 {40}
0.49 {50}
0.59 {60}
0.59 {60}
0.78 {80}
0.98 {100}
0.98 {100}
0.98 {100}
0.98 {100}
–
2.0 .079
2.0 .079
13.5 .531
11.0 .433
11.0 .433
8.5 .335
6.5 .256
6.5 .256
2.0 .079
2.0 .079
2.0 .079
25 .984
0.8 .031
0.8 .031
3.2 .126
2.4 .094
2.4 .094
2.0 .079
1.5 .059
1.5 .059
0.8 .031
0.8 .031
0.8 .031
–
0.8 .031
5.0 .197
4.0 .157
3.0 .118
3.0 .118
2.5 .098
2.0 .079
2.0 .079
6.0 .236
6.0 .236
6.0 .236
11 .433
30 0.8 1.181 .031
44 1.2 1.732 .047
25 2.0 .984 .079
40 1.9 1.575 .75
50 2.0 1.969 .079
25 1.3 .984 .051
40 1.6 1.575 .063
50 1.6 1.969 .063
21.8 0.8 .858 .031
33.3 1.2 1.311 .047
33.3 1.2 1.311 .047
36 1.417 (T.T.)
WIRING DIAGRAM
Hinge lever
Roller lever
Circuit
One-way roller lever
Hinge short lever
ML
COM
Short roller lever
One-way short roller lever
Panel mount push plunger
Panel mount roller plunger
N.C.
N.O.
Panel mount cross roller plunger 5.88 {600}
Flexible rod 1.18 {120}
Terminal
Note) For the operating characteristics, refer to the TECHNICAL INFORMATION.
COM
N.O.
N.C.
5. Protective characteristics
Protective construction
Screw terminal type
Epoxy-sealed terminal type
IEC
IP60
IP64
–
(1) Remove the terminal cover with a v
driver.
In this case, fasten the terminal cover in
the opposite direction.
•ꢀForꢀepoxy-sealedꢀterminalꢀtypes,ꢀthereꢀ
are two types by the cord outlet direction;
N.C. side and COM side.
4. Flexible rod type
(1) Put the detective object to the tip of
plastic part.
CAUTIONS
1. When the switch is to be used in plac-
es where oil or is abundant, bore a drain
hole in the bottom of the terminal cover.
2. Avoid places where highly acid or alkaline
fluids are used or high temperatures prevail.
3.Wiring
(2) Insert the lead wire through the
knock-out of the terminal cover.
(3) Connect the lead wire to the terminal.
When connecting the terminals with the
fasten lug, those with the insulation
sleeve are recommended.
(4) The terminal cover can be mounted in
both directions.
(2) Avoid pushing the tip of actuating
spring in the direction of axis. In the plac-
es of oil or water splashes and much
dust area, use the limit switch with keep-
ing the actuating spring in the vertical
direction.
N.C.
COM
Standard
10/2010
23
ML (AZ7)
mm inch
DIMENSIONS
Short push plunger type
Push plunger type
12 dia.
.472
12 dia.
.472
(
)
P.T. 2 max.
23.3±0.3
.917±.012
(
)
P.T. 2 max.
23.3±0.3
.917±.012
.079
.079
8 dia.
.315
7 dia.
.276
(
)
16 dia.
.630
O.P.
(
)
O.P.
(
)
30±0.8
1.181±.031
25
44±1.2
1.732±.047
16 dia.
.630
(
)
.984
(
)
25
AZ7100
(
)
.984
AZ7110
17±0.8
.669±.031
17±0.8
.669±.031
4.2±0.2 dia.
25.4±0.15
1 inch
4.2±0.2 dia.
14.3
.563
25.4±0.15
1 inch
14.3
.563
21.4
.843
54±0.2
21.4
.843
54±0.2
2.126±.008
16.5 max.
.650
2.126±.008
16.5 max.
.650
General tolerance: 0.4 .016
Hinge lever type
Roller lever
type
AZ7121
8.5±0.1
.335±.004
AZ7120
(
)
P.T. 11.0 max.
48.35±1.0
1.904±.039
.433
8.0
.315
(
)
P.T. 13.5 max.
.531
63.5±1.0
2.500±.039
12.5 dia.
.492
(
)
O.P.
40±1.9
1.575±.075
(
)
O.P.
25±2.0
.984±.079
17±0.8
.669±.031
17±0.8
.669±.031
4.2±0.2 dia.
25.4±0.15
14.3
.563
4.2±0.2 dia.
25.4±0.15
1 inch
54±0.2
14.3
.563
1 inch
21.4
.843
21.4
.843
54±0.2
2.126±.008
2.126±.008
16.5 max.
.650
16.5 max.
.650
General tolerance: 0.4 .016
One-way roller lever type
Hinge short lever type
48.35 1.0
1.904 .039
8.5±0.1
.335±.004
AZ7140
UNOPERATING
DIRECTION
OPERATING DIRECTION
8.0
.315
39.2±1.0
1.543±.039
(
)
P.T. 8.5 max.
12.5 dia.
.492
.335
AZ7124
(
)
F.P.
57 2.0
2.244 .079
(
)
O.P.
50 2.0
1.969 .079
(
)
O.P.
25±1.3
.984±.051
17±0.8
.669±.031
17 0.8
.669 .031
4.2±0.2 dia.
25.4±0.15
14.3
.563
4.2 0.2 dia.
25.4 0.15
1 inch
1 inch
54±0.2
14.3
.563
21.4
.843
General tolerance: 0.4 .016
54 0.2
2.126±.008
21.4
.843
16.5 max.
.650
2.126 .008
16.5 max.
.650
10/2010
24
ML (AZ7)
mm inch
Short roller lever type
One-way short roller lever type
30.2 1.0
1.189 .039
UNOPERATING
DIRECTION
8.0
.315
OPERATING DIRECTION
x
(
)
a
P.T. 6.5 max.
m
30.2±1.0
1.189±.039
.256
°
0
AZ7141
8.0
.315
l
AZ7144
l
12.5 dia.
.492
w
10
.394
(
)
F.P.
55 1.6
2.165 .063
12.5 dia.
.492
(
)
O.P.
(
)
O.P.
50 1.6
1.969 .063
40±1.6
1.575±.063
17 0.8
.669 .031
17±0.8
.669±.031
4.2 0.2 dia.
25.4 0.15
1 inch
4.2±0.2 dia.
14.3
.563
25.4±0.15
1 inch
14.3
.563
54 0.2
21.4
.843
54±0.2
21.4
.843
2.126 .008
16.5 max.
.650
2.126±.008
16.5 max.
.650
General tolerance: 0.4 .016
Panel mount push plunger type
Panel mount roller plunger type
AZ7311
23.3±0.5
.917±.020
3.8
.150
(
)
P.T. 2 max.
.079
17
.669
23.3±0.5
.917±.020
AZ7310
(
)
P.T. 2 max.
.079
(
)
M12 P=1.0
12.5 dia.
.492
8 dia.
.315
(
)
M12 P=1.0
2-panel mounting nut
Thickness 3.2 .126
2-panel mounting nut
Thickness 3.2 .126
Length of opposite side 17 .669
Teethed washer
(
)
O.P.
15.3
.602
33.3±1.2
1.311±.047
(
)
O.P.
Length of opposite side 17 .669
Teethed washer
21.8±0.8
.858±.031
(
)
(
)
25
25
(
)
(
)
.984
.984
17±0.8
.669±.031
17±0.8
.669±.031
4.2±0.2 dia.
4.2±0.2 dia.
25.4±0.15
1 inch
25.4±0.15
14.3
.563
14.3
.563
1 inch
54±0.2
54±0.2
21.4
.843
21.4
.843
2.126±.008
2.126±.008
16.5 max.
.650
16.5 max.
.650
General tolerance: 0.4 .016
Panel mount cross roller plunger type
Flexible rod type
(
)
Total travel 36
(
)
)
)
1.417
(
Pretravel 25
23.3
.917
(
.984
24.5
.965
(
Range of
operating
)
position
107.5±1.5
4.232±.059
23.3±0.5
.917±.020
16 dia.
.630
(
)
P.T. 2 max.
12.5 dia.23.8
.492 dia.2.150
.079
AZ7312
(
)
M12 P=1.0
2-panel mounting nut
Thickness 3.2 .126
Length of opposite side 17 .669
Teethed washer
17.5
.689
(
)
O.P.
15.3
.602
33.3±1.2
1.311±.047
24
.945
(
)
25
(
)
.984
AZ7166
17±0.8
.669±.031
17±0.8
.669±.031
4.2±0.2 dia.
25.4±0.15
1 inch
14.3
.563
21.4
.843
54±0.2
4.2±0.2 dia.
25.4±0.15
14.3
.563
2.126±.008
16.5 max.
.650
1 inch
54±0.2
21.4
.843
2.126±.008
16.5 max.
.650
General tolerance: 0.4 .016
10/2010
25
相关型号：
AZ7124
Snap Acting/Limit Switch, DPDT, Momentary, 0.4A, 115VDC, 14mm, Screw Terminal, One-way Roller Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZ7140F
Snap Acting/Limit Switch, DPDT, Momentary, 0.4A, 115VDC, 11mm, Screw Terminal, Hinge Short Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZ7141F
Snap Acting/Limit Switch, DPDT, Momentary, 0.4A, 115VDC, 8.5mm, Screw Terminal, Short Roller Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZ7144F
Snap Acting/Limit Switch, DPDT, Momentary, 0.4A, 115VDC, 14mm, Screw Terminal, One-way Short Roller Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZ7166F
Snap Acting/Limit Switch, DPDT, Momentary, 0.4A, 115VDC, 36mm, Screw Terminal, Flexible Rod Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明