AZH1221 [PANASONIC]
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT;型号: | AZH1221 |
厂家: | PANASONIC |
描述: | Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT 开关 光电二极管 |
文件: | 总14页 (文件大小:1110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
COMPACT SIZE
LIMIT SWITCHES
HL (AZH)
Limit Switches
•ꢀ Wide selections of actuators, terminals and
bodies to meet any application
•ꢀꢀExcellent environmental resistance
Die-casting case—IEC IP67
Plastic case—IEC IP64
•ꢀꢀHighly reliable operation
Bifurcated contact (Au clad) suitable for low-level
circuit control
•ꢀꢀConnector type for easy installation
Easy on side installation with M4 screws
•ꢀꢀCompact design good for limited mounting space
17% less mounting space compared with ML (AZ7)
Limit Switch
•ꢀ Conforms to UL/CSA TÜV standards
PRODUCT TYPE
1. Limit Switches
Die-casting case
Plastic case
Screw terminal
Type
Screw terminal
Connector type
Bifurcated contact
Actuator
Standard
Bifurcated
Standard
Bifurcated
Without LED
With LED
Push plunger
Roller plunger
Common to panel mount push plunger
Common to panel mount roller plunger
Common to panel mount cross roller plunger
AZH1001
AZH1002
AZH1003
AZH1031
AZH1032
AZH1033
AZH1011
AZH1012
AZH1013
AZH1041
AZH1021
AZH1044
AZH1024
AZH1066
AZH1201
AZH1202
AZH1203
AZH1231
AZH1232
AZH1233
AZH1211
AZH1212
AZH1213
AZH1241
AZH1221
AZH1244
AZH1224
AZH1266
Cross roller plunger
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
AZH2031
AZH2032
AZH2033
AZH2011
AZH2012
AZH2013
AZH2041
AZH2021
AZH2044
AZH2024
—
AZH2231
AZH2232
AZH2233
AZH2211
AZH2212
AZH2213
AZH2241
AZH2221
AZH2244
AZH2224
—
AZH2331
AZH2332
AZH2333
AZH2311
AZH2312
AZH2313
AZH2341
AZH2321
AZH2344
AZH2324
—
AZH233116
AZH233216
AZH233316
AZH231116
AZH231216
AZH231316
AZH234116
AZH232116
AZH234416
AZH232416
—
Roller lever
One-way short roller lever
One-way short lever
Flexible rod
2. Accessories
Specifications
Product
Application
Part No.
Pin arrangement
Type
Core No.
Color of wire
Conductor
0.5 mm2
Length of cable
Brown
White
Blue
Straight
AZH28113
AZH28133
Cable connector
3 m
9.843 ft
All connector
type
AC
4
(Circum-
ference: 6.5 dia.)
cord
Angle
Black
FOREIGN STANDARDS
Standard
File no.:
Applicable product
E122222
Part No.
Ratings: Normal load: 5 A, 250 VAC (105 cycles), Pilot Duty B300
UL
Minute load:
0.1 A, 30 VDC
All models
Certified products:
Order using the standard part number.
File no.:
LR55880
Ratings: Normal load: 5 A, 250 VAC, Pilot Duty B300
CSA
Minute load:
0.1 A, 30 VDC
All models
Certified products:
File no.: Resin case type
J9650515
Die-cast case type J9650514
...
Ratings: Normal load for resin case type: AC–15 2A/250V~, DC–12 1A/30V
...
Place a CE at the end of the part
number when ordering.
Minute load for resin case type: DC–12 0.1A/30V
TÜV
...
Normal load for die-cast case type: DC–12 1A/30V
...
Minute load for die-cast case type: DC–12 0.1A/30V
Certified products: All models except those with LED lamps
10/2010
8
HL (AZH)
SPECIFICATIONS
1. Ratings
Load
Standard type
Inductive
Bifurcated type
Motor
Without LED
With LED
Rated
Resistive
Lamp
control voltage
125 V AC
250 V AC
8 V DC
N.C.
2 A
1 A
—
—
—
—
—
—
N.O.
1 A
0.5 A
—
—
—
—
—
—
Resistive
5 A
5 A
5 A
5 A
—
5 A
0.5 A
0.25 A
1.5 A
1.5 A
—
—
—
—
—
—
3 A
3 A
0.1 A
—
—
—
—
1.5 A
1.5 A
—
1.5 A
0.05 A
0.03 A
0.1 A
0.1 A
—
0.1 A
—
14 V DC
24 V DC
30 V DC
125 V DC
250 V DC
—
0.1 A
—
—
—
—
Notes: 1) Parameter of inductive load: AC power factor: Min. 0.4; DC time constant: Max. 7 ms.
2) Lamp load generates 10 times of inrush current. 3) Motor load generates 6 times of inrush current.
2. Characteristics
Standard type
Screw terminal
1 Form C
Initial: Max. 15 mΩ
Silver alloy
Bifurcated type
Screw terminal
1 Form C (Bifurcated contact)
Initial: Max. 100 mΩ Initial: Max. 150 mΩ
Gold clad
Connector type
Contact arrangement
Contact resistance
Contact material
Insulation resistance
Initial: Min. 100MΩ (at 500 V DC)
1,000 Vrms for 1 min. between non-consecutive terminals
1,500 Vrms for 1 min. between dead metal parts and terminals
1,500 Vrms for 1 min. between ground and terminals
Initial breakdown voltage
Max. 98 m/s2 {10 G}
Max. 294 m/s2 {30 G}
Free position
Shock
resistance
Full operating position
Vibration resistance
Mechanical life
Electrical life
10 to 55 Hz (Double amplitude for max. 1.5 mm)
107 (at 120 cpm)
5 × 105 (at 20 cpm, 5 A 250 V AC resistive load)
5 × 105 (at 20 cpm, 0.1 A 125 V AC resistive load)
Ambient temperature
Ambient humidity
Max. switching frequency
–10 to +80°C +14 to +176°F
Max. 95% R.H.
Max. 120 cpm
3. Operating characteristics
•ꢀDie-castꢀcase
Operating
force, max.
N (gf)
Movement dif-
ferential, max.
mm (inch)
Characteristics
Release force, Pretravel, max.
Overtravel, min.
mm (inch)
Operating position,
max. mm (inch)
min. N (gf)
mm (inch)
Actuator
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
Roller lever
One-way short roller lever
One-way short lever
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
3.92 (400)
2.45 (250)
3.92 (400)
2.45 (250)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
0.78 (80)
0.39 (40)
0.78 (80)
0.39 (40)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
2.0 (.079)
4.0 (.157)
2.0 (.079)
4.0 (.157)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.3 (.012)
0.6 (.024)
0.3 (.012)
0.6 (.024)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
4.0 (.157)
7.0 (.276)
4.0 (.157)
7.0 (.276)
17.4±0.8 (.685±.031)
23.4±0.8 (.921±.031)
23.4±0.8 (.921±.031)
30.0±0.8 (1.181±.031)
41.3±0.8 (1.626±.031)
41.3±0.8 (1.626±.031)
23.1±0.8 (.909±.031)
23.1±0.8 (.909±.031)
34.3±0.8 (1.350±.031)
34.3±0.8 (1.350±.031)
•ꢀPlasticꢀcase
Characteristics
Actuator
Operating
force, max.
N (gf)
Movement dif-
ferential, max.
mm (inch)
Release force, Pretravel, max.
Overtravel, min.
mm (inch)
Operating position,
max. mm (inch)
min. N (gf)
mm (inch)
Push plunger
Roller plunger
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
3.92 (400)
2.45 (250)
3.92 (400)
2.45 (250)
0.88 (90)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.78 (80)
0.39 (40)
0.78 (80)
0.39 (40)
—
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
2.0 (.079)
4.0 (.157)
2.0 (.079)
4.0 (.157)
30.0 (1.181)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.3 (.012)
0.6 (.024)
0.3 (.012)
0.6 (.024)
—
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
4.0 (.157)
7.0 (.276)
4.0 (.157)
7.0 (.276)
20.0 (.787)0
25.4±0.8 (1.000±.031)
31.4±0.8 (1.236±.031)
31.4±0.8 (1.236±.031)
17.4±0.8 (.685±.031)
23.4±0.8 (.921±.031)
23.4±0.8 (.921±.031)
30.0±0.8 (1.181±.031)
41.3±0.8 (1.626±.031)
41.3±0.8 (1.626±.031)
23.1±0.8 (.909±.031)
23.1±0.8 (.909±.031)
34.3±0.8 (1.350±.031)
34.3±0.8 (1.350±.031)
—
Cross roller plunger
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
Roller lever
One-way short roller lever
One-way short lever
Flexible rod
10/2010
9
HL (AZH)
4. Performance data for EN60947-5-1
Plastic case
Standard
Plastic case
Bifurcated
Die-casting case
Standard
Die-casting case
Bifurcated
Item
Rated insulated voltage
250V AC
2.5kV
250V AC
2.5kV
30V DC
1.5kV
0.8kV
5A
30V DC
1.5kV
0.8kV
1A
Impulse withstand voltage
Switching excess voltage
Rated closed thermocurrent
Conditional short-circuit current
Short-circuit protection
2.5kV
0.8kV
5A
1A
100A
100A
100A
100A
10A Fuse
10A Fuse
10A Fuse
10A Fuse
IP64 (switch)
IP54 (terminal)
IP64 (switch)
IP54 (terminal)
Protective construction
Degree of contamination
IP67
3
IP67
3
3
3
OUTPUT CIRCUIT
Wiring diagram
1) Screw terminal type
Internal circuit
2) LED wired type
Lamp lighting circuit
12
2
N.C.
N.C.
4
3
14
N.O.
N.O.
LED
resistance
11
Note: Since LED is connected to N.O. side,
the polarity of the load shall be + for N.O.
COM
COM
CONTACTS
Screw terminal type
Connector type
Plunger type
Lever type
1
4
2
3
Color of lead-
Contact No.
Terminals
wire
Brown
White
Blue
1
2
3
4
—
The terminal cover
can be mounted in
both directions.
The terminal cover
can be mounted in
both directions.
N.C.
COM
N.O.
COM
N.O.
COM
N.C.
N.C.
N.O.
Black
LED rating
Rating
Protective construction
Leakage
current
Internal
resistance
Die-cast
IEC standard
Plastic case
case
24 V DC
1.5 mA
18 kΩ
IP64
IP67
❍
❍
❍
×
The leakage current changes depends on the
resistance of load connected in parallel.
10/2010
10
HL (AZH)
mm inch General tolerance: ±0.4 ±.016
DIMENSIONS
44.5 1.752
33 0.15
Die-cast case
Pretravel
1.5 max.
.059
1.299 .006
10
1. Screw terminal
Panel mount push plunger
8 dia.
.315
.394
M14 (P = 1) threaded
Stainless steel
2-panel mounting nut
Appropriate total-travel range
Thickness 3 .118
Operating position
17.4 0.8
.685 .031
Length of opposite side 17 .669
4.7
.185
0.5
.020
Operating force, max.
11.8 (1200)
10
+0.2
4.2
.394
+0
N (gf)
+.008
+0
.165
8
.315
Release force, min.
N (gf)
4.90 (500)
+0.2
4.5
.177
4.2
dia.
dia.
+0
Pretravel, max.
mm (inch)
+.008
.165
1.5 (.059)
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
0.1 (.004)
Overtravel, min.
mm (inch)
3.0 (.118)
56
2.205
18
.709
AZH2031
AZH2231
Operating position,
mm (inch)
17.4±0.8
(.685±.031)
Panel mount roller plunger
44.5 1.752
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
1.5 max.
.059
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Operating position
23.4 0.8
Length of opposite side 17 .669
17
.921 .031
4.7
.669
.185
Operating force, max.
N (gf)
10
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
0.5
.020
4.2
.394
+0
+.008
.165
+0
Release force, min.
N (gf)
8
.315
+0.2
+0
4.5
.177
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2032
AZH2232
Operating position,
mm (inch)
23.4±0.8
(.909±.031)
Panel mount cross roller plunger
44.5 1.752
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
Operating position
23.4 0.8
2-panel mounting nut
Thickness 3 .118
17
.921 .031
Length of opposite side 17 .669
4.7
.669
Operating force, max.
N (gf)
.185
10
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
0.5
.020
4.2
.394
+0
+.008
.165
+0
Release force, min.
N (gf)
8
.315
+0.2
+0
4.5
.177
Pretravel, max.
mm (inch)
4.2
dia.
dia.
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2033
AZH2233
Operating position,
mm (inch)
23.4±0.8
(.909±.031)
Sealed push plunger
44.5 1.752
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
8 dia.
.315
10
.394
Stainless steel
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
30.0 0.8
.185
Operating force, max.
N (gf)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
0.5
.020
1.181 .031
4.2
+0
+.008
.165
+0
Release force, min.
N (gf)
+0.2
4.5
.177
4.2
dia.
dia.
+0
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2011
AZH2211
Operating position,
mm (inch)
30.0±0.8
(1.181±.031)
10/2010
11
HL (AZH)
Sealed roller plunger
mm inch General tolerance: ±0.4 ±.016
10.5 .413 dia. × width 4 .157
Stainless steel roller
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
1.299 .006
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating force, max.
11.8 (1200)
Operating position
41.3 0.8
1.626 .031
.185
N (gf)
+0.2
+0
0.5
.020
4.2
Release force, min.
+.008
+0
.165
4.90 (500)
N (gf)
Pretravel, max.
mm (inch)
+0.2
1.5 (.059)
4.5
.177
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
0.1 (.004)
28.4
1.118
Overtravel, min.
mm (inch)
3.0 (.118)
56
2.205
18
.709
AZH2012
AZH2212
Operating position,
mm (inch)
41.3±0.8
(1.626±.031)
Sealed cross roller plunger
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
1.299 .006
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating force, max.
N (gf)
Operating position
41.3 0.8
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
.185
+0.2
0.5
.020
1.626 .031
4.2
+0
Release force, min.
N (gf)
+.008
+0
.165
Pretravel, max.
mm (inch)
+0.2
4.5
.177
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2013
AZH2213
Operating position,
mm (inch)
41.3±0.8
(1.626±.031)
Short roller lever
44.5 1.752
33 0.15
10.5 .413 dia. × width 4 .157
Stainless steel roller
1.299 .006
R24.4
R.961
Pretravel
2.0 max.
.079
17.4
.685
4.7
.185
0.5
.020
19
.748
10
.394
Operating
position
Operating force, max.
N (gf)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
23.1 0.8
.909 .031
13
.512
10.5
.413
4.5
.177
Release force, min.
N (gf)
+0.2
+0
4.2
+.008
+0.2
.165
+0
4.2
dia.
dia.
+0
+.008
Pretravel, max.
mm (inch)
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2041
AZH2241
Operating position,
mm (inch)
23.1±0.8
(.909±.031)
Roller lever
44.5 1.752
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
4.0 max.
.157
17.4
.685
4.7
.185
19
R43.9
.748
0.5
.020
R1.728
10
.394
Operating
Operating force, max.
N (gf)
position
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
23.1 0.8
.909 .031
13
10.5
4.5
.512
+0.2
+0
.413
Release force, min.
N (gf)
4.2
.177
+.008
+0
+0.2
.165
4.2
dia.
dia.
+0
+.008
Pretravel, max.
mm (inch)
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2021
AZH2221
Operating position,
mm (inch)
23.1±0.8
(.909±.031)
10/2010
12
HL (AZH)
One-way short roller lever
mm inch General tolerance: ±0.4 ±.016
10.5 .413 dia. × width 4 .157
Stainless steel roller
R29.8
R1.173
Pretravel
2.0 max.
17.4
.685
33 0.15
1.299 .006
.079
4.7
.185
19
.748
Operating
Operating force, max.
3.92 (400)
10
.394
position
0.5
.020
34.3 0.8
1.350 .031
N (gf)
Release force, min.
N (gf)
13
10.5
.413
0.78 (80)
4.5
.512
+0.2
+0
4.2
.177
+.008
+0
Pretravel, max.
mm (inch)
+0.2
.165
2.0 (.079)
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
0.3 (.012)
Overtravel, min.
mm (inch)
4.0 (.157)
44.5 1.752
56 2.205
18
.709
AZH2044
AZH2244
Operating position,
mm (inch)
34.3±0.8
(1.350±.031)
One-way roller lever
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
4.0 max.
.157
17.4
.685
33 0.15
1.299 .006
R47.1
R1.854
19
.748
4.7
.185
Operating
10
.394
position
0.5
.020
Operating force, max.
N (gf)
34.3 0.8
1.350 .031
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
13
10.5
.413
Release force, min.
N (gf)
4.5
.512
+0.2
4.2
.177
+0
+.008
+0
+0.2
.165
Pretravel, max.
mm (inch)
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
44.5 1.752
56 2.205
18
.709
AZH2024
AZH2224
Operating position,
mm (inch)
34.3±0.8
(1.350±.031)
2. Connector type
Panel mount push plunger
44.5 1.752
33 0.15
1.299 .006
Pretravel
1.5 max.
10
.394
8 dia.
.315
M14 (P = 1) threaded
Stainless steel
.059
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
Appropriate total-travel range
Operating position
17.4 0.8
.685 .031
4.7
.185
Operating force, max.
N (gf)
10
+0.2
0.5
.020
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
4.2
.394
+0
+.008
+0
.165
8
.315
Release force, min.
N (gf)
+0.2
4.5
4.2
dia.
+0
20.4
.803
Pretravel, max.
mm (inch)
+.008
.177
LED
.165
dia.
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
M12×1
AZH2331
Operating position,
mm (inch)
17.4±0.8
AZH233116
(.685±.031)
Panel mount roller plunger
44.5 1.752
10.5 .413 dia. × width 4 .157
Stainless steel roller
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Operating position
23.4 0.8
Length of opposite side 17 .669
17
.921 .031
4.7
.669
.185
Operating force, max.
N (gf)
10
+0.2
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
0.5
.020
4.2
.394
+0
+.008
+0
.165
8
.315
Release force, min.
N (gf)
+0.2
+0
4.5
.177
4.2
dia.
dia.
20.4
.803
Pretravel, max.
mm (inch)
+.008
.165
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2332
AZH233216
Operating position,
mm (inch)
23.4±0.8
(.909±.031)
10/2010
13
HL (AZH)
Panel mount cross roller plunger
mm inch General tolerance: ±0.4 ±.016
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
1.299 .006
10
.394
Stainless steel roller
Appropriate
total-travel range
M14 (P = 1) threaded
Operating position
23.4 0.8
2-panel mounting nut
Thickness 3 .118
17
.921 .031
Length of opposite side 17 .669
4.7
.669
Operating force, max.
11.8 (1200)
.185
10
+0.2
0.5
.020
N (gf)
4.2
.394
+0
+.008
.165
+0
Release force, min.
N (gf)
8
.315
4.90 (500)
+0.2
+0
4.5
.177
4.2
dia.
dia.
Pretravel, max.
mm (inch)
20.4
.803
1.5 (.059)
+.008
.165
+0
Movement differential,
max. mm (inch)
28.4
1.118
0.1 (.004)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
3.0 (.118)
57.6
2.268
18
.709
LED
M12×1
AZH2333
AZH233316
Operating position,
mm (inch)
23.4±0.8
(.921±.031)
Sealed push plunger
44.5 1.752
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
8 dia.
.315
10
.394
Stainless steel
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
30.0 0.8
1.181 .031
.185
Operating force, max.
N (gf)
+0.2
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
0.5
.020
4.2
+0
+.008
.165
+0
Release force, min.
N (gf)
+0.2
4.5
.177
4.2
dia.
dia.
+0
20.4
.803
Pretravel, max.
mm (inch)
+.008
.165
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2311
AZH231116
Operating position,
mm (inch)
30.0±0.8
(1.181±.031)
Sealed roller plunger
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
1.299 .006
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating force, max.
N (gf)
Operating position
41.3 0.8
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
.185
+0.2
0.5
.020
1.626 .031
4.2
+0
+.008
Release force, min.
N (gf)
.165
+0
Pretravel, max.
mm (inch)
+0.2
4.5
.177
4.2
dia.
dia.
+0
20.4
.803
+.008
.165
+0
Movement differential,
max. mm (inch)
28.4
1.118
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2312
AZH231216
Operating position,
mm (inch)
41.3±0.8
(1.626±.031)
Sealed cross roller plunger
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
1.299 .006
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
41.3 0.8
Operating force, max.
N (gf)
.185
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
0.5
.020
1.626 .031
4.2
+0
+.008
Release force, min.
N (gf)
.165
+0
Pretravel, max.
mm (inch)
+0.2
4.5
.177
4.2
dia.
dia.
+0
20.4
.803
+.008
.165
+0
Movement differential,
max. mm (inch)
28.4
1.118
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2313
AZH231316
Operating position,
mm (inch)
41.3±0.8
(1.626±.031)
10/2010
14
HL (AZH)
Short roller lever
mm inch General tolerance: ±0.4 ±.016
44.5 1.752
33 0.15
10.5 .413 dia. × width 4 .157
Stainless steel roller
1.299 .006
R24.4
R.961
Pretravel
2.0 max.
.079
17.4
.685
4.7
.185
0.5
.020
19
.748
10
.394
Operating
Operating force, max.
3.92 (400)
position
23.1 0.8
.909 .031
N (gf)
13
.512
10.5
.413
4.5
.177
+0.2
Release force, min.
N (gf)
4.2
+0
0.78 (80)
+.008
+0
+0.2
.165
4.2
dia.
dia.
+0
20.4
.803
+.008
Pretravel, max.
mm (inch)
.165
+0
2.0 (.079)
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
0.3 (.012)
Overtravel, min.
mm (inch)
4.0 (.157)
57.6
2.268
18
.709
LED
M12×1
AZH2341
AZH234116
Operating position,
mm (inch)
23.1±0.8
(.909±.031)
Roller lever
44.5 1.752
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
17.4
.685
4.0 max.
.157
4.7
.185
19
.748
R43.9
0.5
.020
R1.728
10
.394
Operating
position
Operating force, max.
N (gf)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
23.1 0.8
.909 .031
13
10.5
.413
4.5
.512
+0.2
Release force, min.
N (gf)
4.2
.177
+0
+.008
+0.2
.165
+0
4.2
dia.
dia.
+0
+.008
.165
Pretravel, max.
mm (inch)
20.4
.803
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2321
AZH232116
Operating position,
mm (inch)
23.1±0.8
(.909±.031)
One-way short roller lever
10.5 .413 dia. × width 4 .157
Stainless steel roller
R29.8
R1.173
Pretravel
2.0 max.
.079
17.4
.685
33 0.15
1.299 .006
4.7
.185
19
.748
Operating
10
.394
position
0.5
.020
34.3 0.8
1.350 .031
Operating force, max.
N (gf)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
13
10.5
.413
4.5
Release force, min.
N (gf)
.512
+0.2
+0
4.2
.177
+.008
+0
+0.2
.165
4.2
dia.
dia.
+0
20.4
.803
Pretravel, max.
mm (inch)
+.008
.165
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
44.5 1.752
57.6 2.268
18
.709
LED
M12×1
AZH2344
AZH234416
Operating position,
mm (inch)
34.3±0.8
(1.350±.031)
One-way roller lever
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
4.0 max.
.157
17.4
.685
33 0.15
1.299 .006
R47.1
19
R1.854
.748
4.7
.185
Operating
10
.394
position
34.3 0.8
1.350 .031
0.5
.020
Operating force, max.
N (gf)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
13
10.5
.413
Release force, min.
N (gf)
4.5
.512
+0.2
+0
4.2
.177
+.008
+0
+0.2
.165
4.2
dia.
dia.
+0
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
44.5 1.752
57.6 2.268
18
.709
LED
M12×1
AZH2324
AZH232416
Operating position,
mm (inch)
34.3±0.8
(1.350±.031)
10/2010
15
HL (AZH)
mm inch General tolerance: ±0.4 ±.016
Plastic case
Push plunger
16 dia.
.630
45 1.772
8 dia.
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10
.394
.315
Appropriate total-travel range
4.7
Operating position
25.4 0.8
.185
Operating force, max.
5.88 (600)
10
+0.2
+0
1.000 .031
0.5
.020
4.2
.394
N (gf)
+.008
+0
.165
8
Release force, min.
.315
4.5
.177
0.98 (100)
N (gf)
+0.2
4.2
dia.
dia.
+0
+.008
Pretravel, max.
mm (inch)
.165
+0
20.4
.803
1.5 (.059)
28.4
1.118
Movement differential,
max. mm (inch)
0.1 (.004)
Overtravel, min.
mm (inch)
3.0 (.118)
(58.9)
(2.319)
18
.709
AZH1001
AZH1201
Operating position,
mm (inch)
25.4±0.8
(1.000±.031)
Roller plunger
45 1.772
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
16 dia.
.630
Pretravel
1.5 max.
.059
10
.394
Appropriate total-travel range
Operating position
31.4 0.8
4.7
1.236 .031
17
.669
.394
.185
Operating force, max.
N (gf)
10
+0.2
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
0.5
.020
4.2
+0
+.008
+0
.165
8
Release force, min.
N (gf)
.315
4.5
.177
+0.2
+0
4.2
dia.
dia.
+.008
Pretravel, max.
mm (inch)
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
(58.9)
18
.709
(2.319)
AZH1002
AZH1202
Operating position,
mm (inch)
31.4±0.8
(1.236±.031)
Cross roller plunger
45 1.772
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
16 dia.
.630
Pretravel
1.5 max.
.059
10
.394
Appropriate total-travel range
Operating position
31.4 0.8
4.7
1.236 .031
17
.669
.394
.185
Operating force, max.
N (gf)
10
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
+0
0.5
.020
4.2
+.008
.165
+0
8
Release force, min.
N (gf)
.315
4.5
.177
+0.2
+0
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
(58.9)
18
.709
(2.319)
AZH1003
AZH1203
Operating position,
mm (inch)
31.4±0.8
(1.236±.031)
Panel mount push plunger
45 1.772
8 dia.
.315
33 0.15
Pretravel
1.5 max.
.059
1.299 .006
10
.394
M14 (P = 1) threaded
Appropriate total-travel range
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
4.7
.185
0.5
.020
Operating position
17.4 0.8
.685 .031
10
Operating force, max.
N (gf)
+0.2
4.2
+0
.394
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+.008
.165
+0
8
.315
Release force, min.
N (gf)
+0.2
4.5
.177
4.2
dia.
+0
+.008
.165
dia.
Pretravel, max.
mm (inch)
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
(58.9)
(2.319)
18
.709
AZH1031
AZH1231
Operating position,
mm (inch)
17.4±0.8
(.685±.031)
10/2010
16
HL (AZH)
Panel mount roller plunger
mm inch General tolerance: ±0.4 ±.016
45 1.772
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
1.5 max.
.059
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Operating position
23.4 0.8
Length of opposite side 17 .669
4.7
.921 .031
17
.669
Operating force, max.
5.88 (600)
.185
10
+0.2
0.5
.020
N (gf)
4.2
+0
.394
+.008
.165
+0
Release force, min.
N (gf)
8
.315
0.98 (100)
+0.2
+0
4.5
.177
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+.008
1.5 (.059)
.165
+0
20.4
.803
28.4
Movement differential,
max. mm (inch)
0.1 (.004)
1.118
Overtravel, min.
mm (inch)
3.0 (.118)
(58.9)
(2.319)
18
.709
AZH1032
AZH1232
Operating position,
mm (inch)
23.4±0.8
(.921±.031)
Panel mount cross roller plunger
45 1.772
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
1.5 max.
.059
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Operating position
23.4 0.8
Length of opposite side 17 .669
4.7
.921 .031
17
.669
Operating force, max.
N (gf)
.185
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
10
+0.2
0.5
.020
4.2
+0
.394
+.008
.165
+0
Release force, min.
N (gf)
8
.315
+0.2
+0
4.5
.177
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
(58.9)
(2.319)
18
.709
AZH1033
AZH1233
Operating position,
mm (inch)
23.4±0.8
(.921±.031)
Sealed push plunger
45 1.772
33 0.15
1.299 .006
8 dia.
.315
Pretravel
1.5 max.
.059
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
30 0.8
1.181 .031
.185
Operating force, max.
N (gf)
+0.2
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
0.5
.020
4.2
+0
+.008
.165
+0
Release force, min.
N (gf)
+0.2
4.5
.177
4.2
dia.
dia.
+0
+.008
Pretravel, max.
mm (inch)
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
(58.9)
18
.709
(2.319)
AZH1011
AZH1211
Operating position,
mm (inch)
30.0±0.8
(1.181±.031)
Sealed roller plunger
45 1.772
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
41.3 0.8
Operating force, max.
N (gf)
.185
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
1.626 .031
0.5
.020
4.2
+0
+.008
Release force, min.
N (gf)
.165
+0
+0.2
4.5
.177
Pretravel, max.
mm (inch)
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
(58.9)
(2.319)
18
.709
AZH1012
AZH1212
Operating position,
mm (inch)
41.3±0.8
(1.626±.031)
10/2010
17
HL (AZH)
Sealed cross roller plunger
mm inch General tolerance: ±±0. ±0±ꢀ1
45 1.772
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
41.3 0.8
1.626 .031
Operating force, max0
5088 (1±±)
.185
N (gf)
+0.2
0.5
.020
4.2
+0
+.008
+0
Release force, min0
.165
±098 (ꢀ±±)
N (gf)
+0.2
Pretravel, max0
mm (inch)
4.5
.177
4.2
dia.
dia.
+0
ꢀ05 (0±59)
+.008
.165
+0
20.4
.803
Movement differential,
max0 mm (inch)
±0ꢀ (0±±. )
28.4
1.118
Overtravel, min0
mm (inch)
30± (0ꢀꢀ8)
(58.9)
(2.319)
18
.709
AZHꢀ±ꢀ3
AZHꢀ2ꢀ3
Operating position,
mm (inch)
. ꢀ03±±08
(ꢀ0121±0±3ꢀ)
Short roller lever
10.5 .413 dia. × width 4 .157
Nylon roller
33 0.15
R24.4
R.961
Pretravel
2.0 max.
.079
17.4
.685
1.299 .006
4.7
.185
19
.748
10
.394
0.5
.020
Operating
position
23.1 0.8
.909 .031
Operating force, max0
N (gf)
3092 (. ±±)
±078 (8±)
20± (0±79)
±03 (0±ꢀ2)
. 0± (0ꢀ57)
14.6
.575
10.5
.413
4.5
+0.2
+0
4.2
.177
Release force, min0
N (gf)
+.008
+0.2
.165
+0
4.2
.165
dia.
dia.
+0
+.008
+0
20.4
.803
Pretravel, max0
mm (inch)
28.4
1.118
Movement differential,
max0 mm (inch)
Overtravel, min0
mm (inch)
18
.709
45 1.772
58.9 2.319
AZHꢀ±. ꢀ
AZHꢀ2. ꢀ
Operating position,
mm (inch)
230ꢀ±±08
(09±9±0±3ꢀ)
Roller lever
10.5 .413 dia. × width 4 .157
33 0.15
Nylon roller
Pretravel
17.4
.685
1.299 .006
4.0 max.
.157
19
4.7
R43.9
.748
.185
R1.728
10
.394
0.5
.020
Operating
position
Operating force, max0
N (gf)
23.1 0.8
.909 .031
14.6
.575
20. 5 (25±)
±039 (. ±)
. 0± (0ꢀ57)
±01 (0±2. )
70± (0271)
10.5
.413
4.5
+0.2
+0
4.2
.177
Release force, min0
N (gf)
+.008
+0
+0.2
.165
4.2
.165
dia.
dia.
+0
+.008
+0
20.4
.803
Pretravel, max0
mm (inch)
28.4
1.118
Movement differential,
max0 mm (inch)
18
.709
Overtravel, min0
mm (inch)
45 1.772
58.9 2.319
AZHꢀ±2ꢀ
AZHꢀ22ꢀ
Operating position,
mm (inch)
230ꢀ±±08
(09±9±0±3ꢀ)
One-way short roller lever
10.5 .413 dia. × width 4 .157
Nylon roller
Pretravel
2.0 max.
17.4
.685
R29.8
R1.173
.079
33 0.15
1.299 .006
19
.748
4.7
.185
Operating
10
.394
0.5
.020
position
Operating force, max0
N (gf)
34.3 0.8
1.350 .031
3092 (. ±±)
±078 (8±)
20± (0±79)
±03 (0±ꢀ2)
. 0± (0ꢀ57)
14.6
.575
10.5
.413
Release force, min0
N (gf)
4.5
+0.2
4.2
+0
.177
+.008
+0
+0.2
.165
4.2
.165
dia.
dia.
Pretravel, max0
mm (inch)
+0
+.008
+0
20.4
.803
28.4
1.118
Movement differential,
max0 mm (inch)
Overtravel, min0
mm (inch)
18
.709
45 1.772
58.9 2.319
AZHꢀ±. .
AZHꢀ2. .
Operating position,
mm (inch)
3. 03±±08
(ꢀ035±±0±3ꢀ)
10/2010
18
HL (AZH)
One-way roller lever
mm inch General tolerance: ±±0. ±0±ꢀ1
10.5 .413 dia. × width 4 .157
Nylon roller
Pretravel
4.0 max.
.157
17.4
.685
33 0.15
1.299 .006
R47.1
R1.854
19
.748
4.7
.185
Operating
10
.394
Operating force, max0
20. 5 (25±)
position
0.5
.020
34.3 0.8
1.350 .031
N (gf)
Release force, min0
N (gf)
14.6
.575
±039 (. ±)
10.5
.413
4.5
+0.2
+0
4.2
.177
Pretravel, max0
mm (inch)
+.008
+0
+0.2
.165
. 0± (0ꢀ57)
4.2
.165
dia.
dia.
+0
+.008
+0
20.4
.803
Movement differential,
max0 mm (inch)
28.4
1.118
±01 (0±2. )
Overtravel, min0
mm (inch)
70± (0271)
18
.709
AZHꢀ±2.
AZHꢀ22.
45 1.772
58.9 2.319
Operating position,
mm (inch)
3. 03±±08
(ꢀ035±±0±3ꢀ)
45 1.772
33 0.15
1.299 .006
Flexible rod
(41.5)
(1.634)
104.2 1.5
4.102 .059
4.7
.185
0.5
.020
(18.2)
(.717)
+0.2
4.2
+0
+.008
+0
.165
4.5
.177
+0.2
4.2
dia.
dia.
+0
Operating force, max0
N (gf)
+.008
±088 (9±)
3±0± (ꢀ0ꢀ8ꢀ)
2±0± (0787)
.165
+0
20.4
.803
Pretravel, min0
mm (inch)
28.4
1.118
AZHꢀ±11
AZHꢀ211
Overtravel, max0
mm (inch)
(58.9)
(2.319)
18
.709
Cable connected cord
Straight type
(15)
(.591)
6.5 dia.
.256 dia.
14 dia.
.551 dia.
37.5
1.476
M12×1
3000
118.11
(35)
(1.378)
(4)
(.157)
AC type
AZH28ꢀꢀ3
Angle type
M12×1
14 dia.
.551 dia.
(15)
(.591)
6.5 dia.
.256 dia.
28.7
1.130
30.4
1.197
(4)
(.157)
3000
118.11
(35)
(1.378)
AC type
AZH28ꢀ33
10/2010
19
HL (AZH)
MOUNTING METHOD
Plastic case
Die-cast case
20 Panel mounting (Panel plunger type)
When the panel mounting type is fixed
on the panel, the torque of hexagonal nut
is set under 708. N0m0
Side mounting (all types)
ꢀ0 Side mounting (all types)
M. screw is used for mounting on side0
Mount it firmly with washer0 Mounting
torque is ꢀ0ꢀ8 to ꢀ0. 7 N0m0
M. screw is used for mounting on side0
Mount it firmly with washer0 Mounting
torque is ꢀ037 to ꢀ057 N0m0
Remove the hexagonal nut when plunger
type is used in side mounting0
Panel mounting hole dimensions
Side mounting hole dimensions
Side mounting hole dimensions
33±0.15
1.299±.006
14.5±0.2 dia.
.571±.008 dia.
33±0.15
1.299±.006
2-4.3 dia. or M4 screw hole
2-.169 dia.
2-4.3 dia. or M4 screw hole
2-.169 dia.
APPLICABLE WIRE
WIRING (For screw terminal)
Take note the terminal arrangement is
different between plunger type and lever
type0 The arrangement of N0C0 and N0O0
is reversed0
(For screw terminal)
M3 small binding screw is used as a ter-
minal screw0 When wiring, don’t connect
the lead wire to the terminal directly0
Fasten the crimped terminals securely
applying a tightening torque of ±02± to
±029 N0m0
Sealed rubber of the lead wire is applica-
ble for 1 dia0 to 8 dia0
Applicable wire
Plunger type
Electric
wire name
Finished
outside
diameter
Wire
strand
Conductor
±075 mm2
ꢀ025 mm2
20± mm2
±075 mm2
ꢀ025 mm2
101 mm dia0
70. mm dia0
80± mm dia0
2-wire
3-wire
Approx. 45
Vinyl cab-
tyre cord
(VCTF)
COM
terminal
N.O.
N.C.
terminal
Approx. 1.772
terminal
Approx. 30
Approx. 1.181
70± mm dia0
708 mm dia0
Lever type
Approx. 15
Approx. .591
COM
terminal
N.C.
terminal
N.O.
terminal
CONNECTOR TYPE
ꢀ) The cord outlet direction is inter-
changeable0 Refer to “How to change the
cord outlet direction”0
. ) When the angle type of connector
cord is used, the cord outlet direction is
as follows0
2) Do not remove the connector over 5±
times0
Cord outlet direction (Right side)
3) Wiring diagram as shown below0
N.C.
Contact No. 2
N.O.
Contact No. 4
COM
Contact No. 3
Contact No. of connector
1
2
Cord outlet direction (Left side)
3
4
Note: Contact No0 ꢀ is not in use0
10/2010
20
HL (AZH)
HOW TO CHANGE THE CORD OUTLET DIRECTION FOR CONNECTOR TYPE
The cord outlet direction is interchangeable both right and left sides0 The direction of connector cord is set to the
right when it is shipped0 When it is used left side direction, follow the next procedure0
Cord outlet direction (Right side)
Step 3
Step ꢀ
Step 2
Fitting metal
Cramp
Body
Terminal cover
Seal rubber
• Do not put the lead wire between termi-
nal cover and body0
• Put the seal rubber at the right place0
• Press up the terminal cover0
Push down the fitting metal while pulling
it horizontal direction0
Turn the terminal cover at an angle of
ꢀ8± degree0 Follow the procedure 30
• Do not pull the terminal cover0
•
Do not rotate the terminal cover many times0
• Do not loosen the terminal screw0
Cord outlet direction (Left side)
Step .
INDICATOR LIGHTING CIRCUIT
(Connector type only)
Internal circuit
ꢀ) See the circuit diagram0
Switch
2) Voltage across the terminal No0 3 and
No0 . shall not exceed 2. V DC, with the
indicated polarity in the circuit diagram0
3) The LED is turned on when the switch
is at a free position0 The LED is turned
off when the switch operates0
. ) Applicable power source is 2. V DC0
Use it with care on leakage current0 The
leakage current is approx0 ꢀ05 mA at 2.
V DC0
Attention
Attention
Contact No. 2
Load
Contact No. 4
+
−
LED
Confirm the fitting metal is on tightly0
If it is loosen, it might be cause of the
trouble0
Resistance
Contact No. 3
CAUTIONS
3) Do not change the operating position
by bending the actuator0
1) Confirmation test in the actual applica-
tion is highly recommended0
Die-cast case
ꢀ) Do not expose HL limit switch to hot
water (over 1±°C ꢀ. ±°F) and in a water
vapor environment0
2) Avoid the place where organic sol-
vents, strong acid, strong alkali liquid and
vapor may attach to the products directly0
Prevent using the HL limit switch in place
where inflammable or corrosive gas will
be generated0
. ) If O0T0 is too big, the life of limit switch
will be shortened by switching friction0
Use it with enough margin of O0T0 7±% of
O0T0 standard value will be good0
5) Attach the terminal cover securely to
the body with the metal stop latch to the
projection of the body0
7) Do not use the switch in a silicon
atmosphere0 Care should be taken
where organic silicon rubber, adhesive,
seling material, oil, grease or lead wire
generates silicon0
where inflammable or corrosive gas will
be generated0
. ) Do not change the operating position
by bending the actuator0
5) If O0T0 is too big, the life of limit switch
will be shortened switching friction0 Use it
with enough margin of O0T0 7±% of O0T0
standard value will be good for use0
1) Attach the terminal cover securely to
the body to the extent you can identify
the clicking or locking sound0
7) A confirmation test in the actual appli-
cation is highly recommended0
8) Do not use the switch in a silicon
atmosphere0 Case should be taken
where organic silicon rubber, adhesive,
sealing material, oil, grease or lead wire
generates silicon0
Plastic case
ꢀ) Do not use in water or oil0 Do not
place the switch where it is always
exposed to water or dust splash0
2) Do not expose HL limit switch to hot
water (over 1±°C ꢀ. ±°F) and in a water
vapor environment0
3) Avoid the place where organic sol-
vents, strong acid, strong alkali liquid and
vapor may attach to the products directly0
Prevent using the HL limit switch is place
10/2010
21
相关型号:
AZH1221CE
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1221F
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1224
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Short Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1224CE
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Short Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1224F
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Short Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1231CE
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Push Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1231F
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Push Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1232
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Roller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1232CE
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Roller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1232F
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Roller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1233CE
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Crossroller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1233F
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Crossroller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明